How to open an electric toothbrush Oral Bi. Poor copy of the PHILIPS electric toothbrush from AzDent - first autopsy and resuscitation

In 2011, I was lucky to snatch Braun Oral-B Triumph Professional Care 9000. Went around it six months with circles, but the price of $ 100 was above my psychological maximum. Then BAT and $ 50 !!! I'm shocked, toad too.

I had to take. Brush is relatively cool. I would have such in childhood - there were fewer holes in the teeth. Replaceable nozzles buy on eBay. Naturally not original. Only once got slag. Usually the spring from the stainless steel, and here came from steel. Threw the whole set.

Until 2016, there were no thoughts with a brush. In 2017, the battery began to pass. Those thoroughly, the charge went fast. So I got up to 2018. The last month started glitches with charge display. Shows 100%, you turn on 0%. I thought I thought. If you drive the model on eBay, then the prices for the Battery Adj and Israel. Thank you at least the size indicate. I asked the right question of Google and received the answer:

standard Battery Sizes and Batteries

It turned out to be in Braun Oral-B Triumph Professional Care 9000 there is a Ni-Mn battery size 4 / 5a per 1.2 volt and a nominal capacity of 2200mack. Ebay prices immediately became adequate. Bought two PKCELL for $ 5. Checked on IMAX-B6. 2700mA poured, 2200mA merges with a current of the 800mA discharge. The dead showed 1500mA.

On YouTube there is a great video on the disassembly:

The most important thing before knocking out the insides to remove the ring:

Installing contacts from a donor to a fresh battery:

A couple of external plans:

On the board is installed

During the years of operation, the Biada had happened to her - the charge was missing at once.

In the Internet found manual. The battery bought 850 rubles on Ebey. Reached in 10 days. Alikespress was the same, rubles for 400.

First of all, remove the ring from the top of the brush.
Then insert charging in low part And twist, while spinning. As soon as it became worse / slipped (there is plastic screw) - pull the white part down.

We take out the insides, pacating two white latches.

We unscrew the display (needed Takes), the Chinese set of different types of screwdrivers

Take out the spring

We disappear 2 output of the old battery

Formulations

We solder new, screw the display.
The brush says that there is no charge. After charging (Manual says about charging day) everything will show as it should.

Let's see how bad old Akum. There are no charges / discharge schedules, only pictures. Because the software curve for him is only under Windows, and it is sick. It was easier to make a photo.

Since the brush took off with charging, I discharge the old battery Imask - I get almost 600 mAh. There is no container on it, 2100mach specified on the new one, we will think that an old similar capacity.

Charged 0.2a for a long time.

Heated current 1a (gives me that in the brush the currents more, well, oh well)

It remains 800mach at discharge to 0.8 V. IMHO in the brush it is so deeply not discharged.

Before the story is as follows. I used the usual electric brush Braun Oral-B until the electric tooth brush was broken by me ... it broke in an interesting way, something inside the taught under the power button. And if the batteries do not pull out, then the toothbrush worked and worked until the charge sees.

Using, thus, a couple of days decided to stop my torment ... That is, I decided to repair or buy exactly such. For those who have an electric brush definitely guess that allegedly it is not collapsible, but not for me. Everything will figure it out, I can also know how the arranged brush from the inside and with all the letters \u003d)

In a word, the padluk's brush did not want to understand how I wanted to disassemble it. Picky filtered, pliers tried to pull thin pliers. It was all in vain for a brush, I did not want to understand the analysis ... My accuracy of the opening was between thoughts. 1) Do not spoil the appearance of the toothbrush 2) to use, so there is - cleaned, pulled out batteries. 3) Just buy a new one.

The third option was organized in principle, and decided to satisfy the luisvo and revealed wanted. Then I took a real surgical scalpel from the tools and began to cut around the rubber button. I cut out and due to limited space, I did not understand why the button of the warning work of the toothbrush does not turn off. Then another incision and another incision, in another place, and revealed and figured out why the brush did not work. It turns out that Sceuko is just an inclusion button. That's so trite, I spoiled the appearance of an electric toothbrush .... I had to be "conntiable" for a couple of days and get used to it again, how to clean ordinary brothers.

after a couple of days we went with a friend to the dental exhibition in Crocus for a new brush. This time, not just for the electric, but for ultrasonic toothbrush Ultrasonex. Thus, there and bought 3,400 rubles, two pieces. Sellers made us a discount \u003d)

Now at home, put the brush to charge, and I myself climb on the Internet. To search again, the information is no longer about the brush themselves (advertising divorce or not), but about ultrasonic waves .... As it turned out as a diagnostic tool, ultrasound is used by doctors for more than twenty years. There is also a procedure for dentists - ultrasonic cleaning of teeth.

they write - "This is the prevention of plaque and a dental stone, necessary for almost everyone. After all, the dental is formed literally at everyone and is the cause of many diseases. Signs that dental deposits are already preventing you of living - the bleeding of the gums when cleaning the brush, the smell of mouth, gum inflammation , Caries and other, more serious diseases. "

and then it came across the site about "pregnancy Ultrasound examination" of its URL such http://www.mother-fuck.ru/pregnancy-ultra.htm
drew attention to it
"Mother-fuck.ru" How do you name for the site? Now translate this game of words ... I am not a Hange, but this on the Internet meets \u003d)

p.S.
regarding ultrasonic brush Ultrasonex SU-700, I can not say anything, as it just started using! Time will show an advertising trick or really better than an electric toothbrush.

To maintain the oral cavity in a healthy condition, people use different care products. But the quality depends on many factors: the initial state of the teeth, the brand paste, a properly selected brush.

Some people use to which it belongs. It helps to control the page presses and carry out hygiene in hard-to-reach places. Sometimes there is a need for repair or replacing the battery, and for this you need to know how to disassemble the BRAUN ORAL-B toothbrush.

How to disassemble: stages

Braun Oral-B has included charger To act. But the model can work without a network, in which case it will be functioning without recharging for a week.

You can independently replace the battery using such instructions:

1. All removable details disconnect.
2. Insert the device in charge and turn 15-20 times until you hear a click that speaks about opening the case.
3. Unscrew small protective screws.
4. All internal components carefully pull out.
5. Dip contacts and pull the battery.
6. Connect contacts to a new power item.
7. Insert a block into place and try to enable the device. If it starts to work, then collect the device completely.
8. If the model assembled does not work, it is necessary to put it on short-term charging. But this will take: new element Food, small screwdriver, soldering iron.

When buying an original toothbrush in the kit is present:

• charger;
• toothbrush;
• nozzle, in some models there may be several of them.

The analysis of the mechanical model is not different from sound and ultrasonic. Differences concern:

• power;
• cost;
• appearance;
• the number of combined movements.

The analysis almost does not differ from Braun Oral-B, the difference is only in appearance and the location of contacts when extracting the battery.

What repair can be done

Most often several types of repair of electric brushes Braun Oral-B

• replacement of the battery;
• repair buttons.
• changing the nozzle.

Where to get a battery

Reliable buying an element in service centers Braun.

Oral-B Toothbrush Battery also often buy on:

• Aliexpress;
• EBay;
• Taobao.

When to change the battery

Like any other device with a battery, the brush fails for several years. There are several signs that indicate that the Oral-B battery is replaced:

1. The device works, but not so actively as before.
2. The efficiency of the oral cavity is reduced under normal actions.
3. Complete charging is enough for one cleaning.
4. The device may turn off at any time.

If Braun Oral-B electric power is over 2 years old, then all of the above signs are talking about violations in the battery - battery element.

The device must be changed in the case when it is completely out of order, but to replace the nozzles once every three months. It is also necessary to look at the state of nozzles and bristles, as everyone individually makes care for the oral cavity. Accordingly, one person can use the nozzle for 5 months, and the other 2.

From year to year, electric toothbrushes are becoming increasingly distributed, and more people go to the use of mechanical devices to electrical, more advanced gadgets. This is explained not only by the fact that such devices are better and efficiently coped with their task, but also the fact that today they began to cost enough cheaply. Of course, you still need to pay for the electric grip, than for the manual, but its properties fully pay for themselves. In the modern market, such a device is represented by mass brands and a large set of models that, in turn, differ in the widest list of characteristics and technical differences. The choice can stop on the simplest products at a price of 10 dollars, as well as on such, the cost of which exceeds 100 or more dollars.

Of course, given the fact that today the toothbrushes have become smart and electrical toothbrushes, a certain care is required for such devices. And so today we want to consider information on how care and repair of the toothbrushes should be carried out.

Electric Toothbrushes Care

First, we propose to consider information about what should be care for so important hygienic devices. In order for your brush to serve you as long as possible, and the cleaning effect remained at the same qualitative indicator, we recommend reading the tips described below:

• Cut the systematic rinsing of the brush. Both before the start of the procedure for cleaning and after it, it is necessary to rinse the brush under running water. In this way, you can remove various trash particles from the bristles. You can not worry about the safety of the device, since modern brushes are moisture-resistant and are not exposed to water;
• After the teeth cleaning procedure, always check the level of charge of the toothbrush so that with the next tooth cleaning you did not expect a "pleasant" surprise in the form of a discharged battery;
• Always keep the device in a vertical position. It is recommended to dry the brush only in a vertical position installed in an empty dry glass;
• Change nozzles no less than 1 time in a few months. As in the case of mechanical toothbrushes, electrical devices also require periodic replacement. Fortunately, this does not imply the purchase of a new device, but only the purchase of a spare nozzle on the brush. After completing such a replacement, you can count on the fact that the effect of cleaning the teeth with electrolate will not decrease, and the nozzle itself will not be a seedler of microbes (after all, when using nozzles for more than 3 months, they begin to accumulate a lot of bacteria);
• When changing nozzles, it is necessary to perform the procedure for cleaning them, implying a thorough rinse under the jet of water. Apply thermal processing (like boiling) is not recommended, it disrupts the structure of bristle fiber.

Using a sterilizer

Another important aspect when caring for electric power is the use of devices such as a sterilizer (they are also called disinfectors). This is a small device in the form of a case or a cup, which serves to perform a more thorough toothbrush sterilization procedure. Through the use of the ultraviolet sterilizer, one can be fully confident that the brush will be completely sterile and ready to use after each sterilization procedure.

Some toothbrushes are sold at once with such devices complete, however, it concerns more expensive gadgets. If you want to buy a disinfector separately, it is a rather rational solution, but you should be prepared for the fact that it can cost such a device as a budget electrolate - from 10 to 20 dollars (and some models and above).

How to charge an electric toothbrush

The next very important question concerning the use of Esech is in the correct use of the battery resources of the device and the extension of its life. Many consumers who systematically use electrical gadgets to clean the teeth are mistakenly believe that the most correct solution is the daily recharging of the device, simply keeping the brush on charging all the time that the gadget is not used. Of course, such a hypothesis is doomed to failure, and such actions are able to entail only the operational failure of the battery and the need to replace it. In fact, care for the battery brushes must be different, and below we will look at the Solving Tips from the specialists.

It is worth noting that some popular electrolacot manufacturers are assigned to their consumers that the recharge of their devices is impossible. That is, if you leave the brush always installed on the Base for charging, there will be no problems with it, the charge will reach the maximum, and the device will automatically stop charging. However, this is not the most practical decision, so it is not recommended to use.

In addition, it is important to note such nuances:

• The complete charge of the brush should be enough to use the device for regular cleaning during the week. If you start to observe the reduction of the battery functionality, it means that it gradually began to exhaust its resources and will soon require a replacement;
• For execution complete charge Brushes, considering the manufacturer and model, can leave 12 to 16 hours of time.

Before the first charging device, it is recommended to carefully examine the instructions in which the information about the correct charge is necessarily stored. If we talk about the most popular Philips or Braun Oral-B devices, then such brushes can be stored at the charging station all the time, however, if you keep the brush in the bathroom, it is easy to keep it connected to the outlet that is simply inconvenient. Therefore, we recommend that you have the most optimal option - to charge once a week, but systematically check the level of charge of the device to avoid trouble with premature battery discharge.

How to disassemble an electric toothbrush

Finally, we want to pay attention to the procedure for disassembling toothbrushes different manufacturers. After all, the replacement of the battery is not the only operation that you may need to perform brushes to users during their operation. Therefore, it is important to know how this gadget is cleared.

Perform actions you need according to the following instructions:

1. Check the device and make sure it is turned off.
2. Remove the nozzle.
3. Remove all the elements of the brushes that are attached without additional funds, like screws.
4. Check unscrewed items, and unscrew them if possible.
5. If we are talking about how to disassemble the BRAUN electric toothbrush, philips or similar brands, then electric base With a card and controller, the brush is installed in the housing without using any screws for fastening. Take pliers or tongs, and with their help, securely fixing the spinning element of the brush, pull it on yourself. The base of the brush is installed in the housing and fixes with a rubber ring, attaching efforts, you can get it.
6. The brush can be considered disassembled.

All other elements of the foundations understand the most simply and do not require a separate instruction. You may need a small curly screwdriver, with which the screws should be unscrewed. Disagreeing the brush, you can:

• Replace diodes;
• Replace rechargeable battery;
• Replace buttons and other damaged elements;
• Remove and replace the motor.

After performing the necessary operations with Esech, its assembly is made in the reverse order.

What to do when the battery is output

If you use your electrostagne for more than one year, you probably noticed that its battery is missing for a long time, as it was before. Battery wear is an absolutely normal phenomenon, and you can fight with it. The ideal solution is to buy a new battery and install it instead of used.

Even despite the fact that the default battery is a non-removable part of the brush design, the procedure for its replacement is not so difficult. To this end, you can use the following instructions:

1. Remove all removable structures from the brush, like nozzles.
2. Find the device nodes attached to the housing using small screws and unscrew them.
3. Disassemble the device.
4. Get to the rechargeable battery and remove it.
5. Remove the Ni-MH battery an element that serves to connect it to contacts in the battery compartment. This may require the use of the soldering iron. The dismantling procedure is extremely simple - touch the sketch of the soldering iron to the element, wait until it is glowing and free from tin.
6. Take the battery purchased earlier to replace.
7. Similarly, with the help of the soldering iron and tin, secure the Ni-MH item on the new battery.
8. Return the battery in the compartment and collect a toothbrush.
9. Check the performance of the device with a new battery.

In this way, you can replace the battery in the Toothbrush Oral-B Triumph and many other models, as well as manufacturers such as Philips. As for the direct purchase of replacement batteries, today it is possible to buy such elements on all well-known sites, like:

• EBay;
• Aliexpress;
• Gearbest.

Now that you know how to care, charging and repairing the toothbrushes, you will be able not only to use correctly this deviceSo that it serves you as long as possible, but also to independently remove and replace its elements in case of failure.