The negative impact of installing and updating the OS on sound.

Many users who have upgraded to Windows 10 or, after a clean installation of the OS, have encountered a variety of sound problems in the system - someone just lost sound on a laptop or computer, while others stopped working through the headphone output on the front of the PC, Another common situation is that the sound itself becomes quieter over time.

This step-by-step guide describes possible ways to fix the most common problems when audio playback does not work correctly or the sound just disappears in Windows 10 after an update or installation, or just in the process of working for no apparent reason. See also: , .

The most common variant of the problem is that sound simply disappears on a computer or laptop. In this case, as a rule (we will consider this option first), the speaker icon on the taskbar is fine, in the Windows 10 Device Manager for the sound card it says "The device is working fine", and the driver does not need to be updated.

True, at the same time, usually (but not always) in this case, the sound card in the device manager is called “High Definition Audio Support Device” (and this is a sure sign that there are no drivers installed on it). This usually happens for Conexant SmartAudio HD, Realtek, VIA HD Audio sound chips, Sony and Asus laptops.

Install sound drivers in Windows 10

What to do in this situation to fix the problem? The almost always working method consists of the following simple steps:

Enter in search engine Model_of_your_laptop support, or Model_of_your_motherboard support. If you encounter problems that are discussed in this manual, I do not recommend starting a driver search, for example, from the Realtek website, first of all, look at the website of the manufacturer not of the chip, but of the entire device.
In the support section find audio drivers to download. If they are for Windows 7 or 8 and not for Windows 10 - that's fine. The main thing is that the bitness does not differ (x64 or x86 must match the bitness of the system currently installed, see)
Install these drivers.

It would seem simple, but many write that they have already done this, but nothing happens and does not change. This is usually because even though the driver installer walks you through the steps, the driver is not actually installed on the device (easy to check by looking at the driver properties in Device Manager). Moreover, the installers of some manufacturers do not report an error.

There are the following ways to solve this problem:

Even if you could not find official drivers, still try the option of removing the sound card in the device manager and then updating the hardware configuration (point 2 above).

Sound or microphone stopped working on Asus laptop (may work for others)

Separately, I note the solution for Asus laptops with a Via Audio sound chip, it is on them that most often there are problems with playback, as well as connecting a microphone in Windows 10. Solution path:

Go to device manager (via right click on start), open the item "Audio inputs and audio outputs"
Through the right click on each item in the section, delete it, if there is an offer to delete the driver, do it too.
Go to the "Sound, game and video devices" section, remove them in the same way (except for HDMI devices).
Download the Via Audio driver from Asus, from the official website for your model, for Windows 8.1 or 7.
Run the driver installer in Windows 8.1 or 7 compatibility mode, preferably as Administrator.

I'll note why I'm pointing to an older version of the driver: I noticed that in most cases VIA 6.0.11.200 turns out to be workable, and not newer drivers.

Playback devices and their advanced options

Some novice users forget to check the settings for sound playback devices in Windows 10, and this is better to do. How exactly:

After making the above settings, check if the sound is working.

The sound has become quiet, wheezing, or the volume is automatically reduced

If, despite the fact that the sound is reproduced, there are some problems with it: it wheezes, it is too quiet (and the volume can change by itself), try the following solutions to the problem.

Apply the settings you made and check if the issue has been resolved. If not, there is another option: try selecting your sound card through the device manager - properties - update the driver and install not the "native" sound card driver (show a list of installed drivers), but one of the compatible ones that Windows 10 can offer itself. In this situation, it sometimes happens that the problem does not appear on "non-native" drivers.

Additionally: check if the Windows Audio service is enabled (press Win+R, type services.msc and find the service, make sure the service is running and its startup type is set to Automatic.

Finally

If none of the above has helped, I also recommend trying to use some popular driver pack, and first check whether the devices themselves are operational - headphones, speakers, microphone: it also happens that the sound problem is not in Windows 10, but in themselves.

1. Reasons for loss of sound
2. Sound not working after Windows 10 update
3. Quiet sound, wheezing or automatic volume reduction
4. No sound in games
5. Conclusion

To date, a huge number of users have already encountered a wide variety of problems after updating the operating system to Windows 10, and the most popular software flaw, perhaps, was the lack of sound on a personal computer running the new OS.

Although the “top ten” has been out for a relatively long time, nevertheless, many users still drive the phrase “Windows 10 no sound” into the search box, which means that our material today can be very useful for you.

Reasons for loss of sound

There are not so many potential sources of this problem, and therefore each owner of a new operating system is able to independently identify the root of the trouble. As a reminder, no matter how funny it may sound, the most common cause of no sound is unconnected speakers, so be sure to check the working condition of the devices that output sound on your PC. It is also common for the computer owner or someone in the household to turn off the sound and simply forget to reset the settings to their original state, and therefore be sure to check the status of the volume icon in the quick access panel.

Another potential technical cause of trouble is a damaged speaker cable, before blaming everything on software problems, try testing the device on another PC or other sound source. If you have no sound in the headphones, then it is also recommended that you first try them on another gadget.

As for the software component, here it is worth starting the system check with the sound driver, it may turn out to be faulty or outdated. You can update the “firewood” on the website of the manufacturer of your sound card, but we strongly do not recommend using third-party resources, otherwise, when solving problems with sound in Windows 10, you run the risk of acquiring a lot of new ones caused by picked up malware.

By the way, you can easily avoid searching for suitable drivers by simply selecting all the items in the control panel menu “Sound, game and video devices” and calling the context menu by clicking the right mouse button, in which you need to activate the hardware configuration update function.

Sound not working after Windows 10 update

In the most common case, after updating the OC, the speaker icon does not display any problems, in the task manager, opposite the sound card, the status is “The device is working properly”, and the driver does not need to be updated.

In order not to prematurely proceed in such a situation to search for another answer to the question of why the sound on the computer disappeared after installing Windows 10, take a close look at the name of the sound card in the device manager, if the “High Definition Audio capable device” design is displayed there, you can be sure - the problem is in the drivers. Most often, this problem occurs with Conexant SmartAudio HD, Realtek, VIA HD Audio sound cards. Also, if you have lost sound on a Sony or Asus laptop, then the problem should be looked for first of all here.

The algorithm of actions to correct the current situation is as follows:

We enter the name of your laptop or motherboard model in the search box and add the word support, the device manufacturer's website should be at the top of the search results, where you can update the driver you are interested in.
We find the drivers we need in the support section, if there is no suitable software specifically for Windows 10, then this does not matter - firewood for a seven or eight will suit us, the main thing is that the bit depth of the system matches.
Install the downloaded drivers and reboot the PC, after that the sound should work.

A common situation is when the user has traveled this path, but a positive result has not been obtained, as a rule, this is the result of incorrect installation of the software, and the driver installer does not report this. Check in the manager if the information about the driver has changed after installation, and if not, then follow the instructions below:

In most cases, running the installer in compatibility mode with the previous version of the operating system will help you;
If the first option did not help, then you should try to remove the sound card in the manager, as well as devices from the list of “audio inputs and audio outputs”, preferably together with the drivers, and immediately after that run the installer;
If the old driver is installed, then you need to right-click on the sound card, select "Update driver" - "Search for drivers on this computer" and check if new compatible drivers for your sound card have appeared in the list of already installed drivers.

Quiet sound, wheezing, or automatic volume reduction

Sometimes there is sound, but its quality leaves much to be desired. In such a situation, you need to configure the sound on a computer with Windows 10, which is done as follows:

We click on the speaker icon in the quick access panel with the right mouse button and go to playback devices;
We select the device with which there are problems - speakers or headphones, after which we right-click on its properties;
In the advanced features tab, disable all effects and apply the updated settings;
Now open the Communication tab and uncheck the box to reduce the volume or mute the sound during communication, selecting the item “No action required”.

After applying all the settings, it’s worth checking the status of our problem with sound not working on Windows 10. Most likely it is solved, but if not, try again to turn to the drivers and install not the native driver for your board, but one of those that the operating system itself will offer system. Often, third-party drivers can restore high-quality sound.

No sound in games

If the game process does not have sound, then you need to answer the question of how to set up sound in the application itself. As a rule, the menu item responsible for sound settings is not difficult to find, but if the sound disappeared after updating the operating system, you may need to manually reinstall the game. In this case, don't forget to copy all saved progress before deleting the app.

Conclusion

As you can see, there are not so many reasons why the sound stopped working - these are technical flaws in devices or connecting cords, user inattention, or software problems caused by driver mismatches or their absence. Dealing with any of them is quite simple, you just need to follow the instructions carefully and check if the software update has actually been installed.

In the event that no defects were found on the output devices, and the drivers are in order, there is a small probability of a malfunction of the specific sound chip or problems with its interaction with the motherboard, in this case we recommend that you contact the service center if you do not have the proper work experience with microelectronic boards. We hope that our material helped you solve the problem and your PC again pleases you with your favorite music or sound.

Millions of PC users have taken advantage of the free upgrade to Windows 10. They were able to evaluate all the advantages and disadvantages of the new operating system, including a considerable number of errors that arose due to incompatibility of equipment with the top ten, incorrect system settings, and lack of necessary software. Sound was no exception in this regard. Windows 10 users have already received the Creators Update, and will soon receive the Full Creators Update. However, the "No sound devices are installed on Windows 10" error continues to occur. What to do in this case and how to fix it?

Ways to solve the problem when sound devices are not installed on Windows 10

If you encounter a message that there are no sound devices installed and you don’t know what to do on Windows 10, we suggest that you read the following recommendations.

Method number 1. Troubleshooting

If this problem appeared on Windows 10 after an update or a clean installation of the operating system, you should use the regular troubleshooter. To do this, do the following:

Right-click on the speaker icon (which is located in the lower right corner of the desktop on the system tray) and select "Detect sound problems."

A small window will appear. Click "Detect problems". And we are waiting for the verification to complete.

The wizard will detect problems and notify you about them. Choose options for action. Often, this is the "Apply this fix" option.

After fixing the problem, you should restart your computer.

Method number 2. Device update

If the device stopped playing sound after installing the update for Windows 10, the drivers may have crashed. To correct this situation, do the following:

Right-click on the Start icon and select Device Manager.

A new window will open. From the list, select "Sound devices" and find "High Definition Audio capable device".

Right-click on the item and select Update Driver Software. We select a search on the PC (if there are drivers loaded) or automatic on the network (in this case, the system can install its own driver from Microsoft).

After updating the software, be sure to reboot the system for the changes to take effect.

Method number 3. Clean software installation

On the network you can find a dozen sites that offer to download sound drivers. However, you should ONLY download the software from the official websites of motherboard or sound card developers. Moreover, the drivers are distributed free of charge and the point is only in the security of the system.

Therefore, we find drivers for sound on the site. Select the version and bitness of Windows. After downloading, you can install them. To do this, you can choose the option to launch the software with an update or double-click and follow the prompts of the installer wizard.

IMPORTANT! If the drivers are not suitable for Windows 10, you can install them in compatibility mode.

Method number 4. Setting audio playback options

If the methods of how to install software for a sound card did not help solve the problem, it is worth performing the correct sound settings. To do this, do the following:

Go to Control Panel and select Sound.

A small window will appear. From the list, select the device that is responsible for playing the sound. Right click on it and select "Properties".

Another window will open. Go to the "Improvements" tab. Here we put a mark "Disable all improvements." We click "Apply".

After making these changes, you need to restart your PC and check the result.

In the case when the above methods did not help solve the problem, it is worth checking the correct connection of the sound device itself to the PC and making sure that it is working.

Hello admin! I recently installed Windows 10 on my computer, but drivers for some devices were not installed along with the operating system: a video card,PCI controller, some MEDIA and USB Device. On the Internet, they suggested that you need to wait a day or two and the drivers will be installed automatically, after three days this did not happen.Now in Device Manager, instead of the name of the video card, there is a Basic video adapter (Microsoft),

Accordingly, the image on the monitor with a black bar

and this is due to the low screen refresh rate of 64 Hz, but you need at least 75 Hz, then the band will disappear, but the desired frequency will appear only after installing a real driver on the video card.

I went to the official NVIDIA website and the drivers are there only for Windows 8.1. I downloaded the DriverPack Solution driver package, but it does not start on Windows 10, an error occurs. Question to how to install drivers on windows 10

Hello friends! Don't forget about the automatic driver search tool built into Windows 10. Microsoft servers contain a very large database of drivers for almost all known devices. In today's article, I will simply remind you how to use this tool, a more complete article lies

After installing Windows 10, go to the Device Manager and see devices (marked with a yellow triangle with an exclamation point) for which the drivers have not been installed. For example, let's open the Video adapters item and see that the basic Microsoft driver is installed on the video card, and the drivers for the sound and chipset of the motherboard are also not installed.

One good thing is that the drivers for the LAN connection network adapter and the Wi-Fi network adapter were automatically installed and we have the Internet. If Windows 10 did not find a driver for your network adapter during installation, then you will have no choice but to use another computer with the Internet and download the driver for the network card on, there are no drivers for Win 10 yet, but I'm sure that the driver is from Win 8.1 will definitely fit.

In Device Manager, right-click on the underlying Microsoft video adapter and select Update Driver Software.

Click on the button Automatically search for updated drivers.

The software for your video card is automatically searched on the Microsoft server.

Driver found and downloading

Installation.

We restart the computer

And we see that the driver for the video card is installed. In the same way, we install drivers for all devices with a yellow triangle and an exclamation mark.

Friends, if you don’t have drivers installed on Windows 10, then try the special ones. You can also try building drivers.

Installing an operating system is always a big step. No one knows for sure if everything will go smoothly, and it often happens that some problems arise. Unfortunately, this also applies to those who decide to install Windows 10. Most often, after starting only the installed OS, they notice that the sound has disappeared. Fortunately, this is solvable, and in the article we will analyze in detail what to do if the sound disappears after installing Windows 10.

Conducting an analysis

First of all, when after installation you do not need to panic and try to re-install in the hope of a different result, it may be that the reason is in the little things.

Windows developers have foreseen a similar situation, and if after installing Windows 10 the sound disappeared and there is no audio, you can use the "Detect problems with sound" function. To call it, you need to right-click on the speaker icon and click on the inscription of the same name in the menu. After that, an analysis of all the problems will be carried out and at the end the verdict will be announced. But, of course, this method is not very reliable and most often it can show that everything is in order or that everything is not in order, but will not offer a solution.

However, if the analysis has shown the cause and offered its solution, do not dare to refuse. This most often happens when the system detects that the sound drivers are not installed. Enter the "Device Manager" and in the line "Sound, game and video devices". If a yellow icon is displayed there, then update the drivers through the context menu, and the problem is solved.

Trifle: lost settings

If the previous solution to the problem did not help, we continue to think about why in Windows 10 TP. Windows 10, abbreviated as TP, which stands for Technical Preview, is a very unreliable version of Windows. The sound in it disappears even because of every little thing. For example, these are downed sound settings. In other words, when the adjustment sliders are simply set to the minimum. No matter how ridiculous it may sound, but such a problem is quite common, and the catch is that few people sin precisely on the settings.

To fix this problem, all you need to do is call the mixer and raise all the sliders there to the maximum. To call the mixer, right-click on the sound icon and in the context menu, click on the inscription of the same name.

If that's the problem, then you're very lucky. However, it often happens that it lies far inside the system itself, and then the solution is no longer so simple, but more on that later in the text.

Lack of drivers

It has already been said above that the problem when, after installing Windows 10, may lie in the drivers. And in principle, the algorithm of actions to eliminate the breakdown was also announced there. But it also happens that in the device manager in the line “Sound, game and video devices” there are no devices at all, although the entire headset is connected.

This happens if the system is completely blind and cannot detect them. relatively simple: you need to download the necessary drivers yourself and install them yourself. It sounds simple, but in reality, many people have problems with this, since the user simply may not know the model of his sound card.

It is very good that there is a way out of this situation, and it is quite simple. Despite the fact that most experts recommend downloading drivers from the manufacturer's official websites, these instructions can be neglected.

There is such a program as iObit Driver Booster. It is completely free, so feel free to download it from the official site and install it. After installation, you will have a huge "START" button in front of you. Click on it and just wait. After a while, you will be shown which drivers you are missing, and the "Install" button will also be located there. Click on it and wait. After the done manipulations, restart the computer, and the sound should appear.

Incompatibility

Now it's time to talk about the worst. When the sound disappeared after installing Windows 10, and none of the above methods worked for you. Most likely, this means that your sound card or headset is simply incompatible. This may be, because the developers themselves admitted that they released Windows 10 in a “raw” state. In this case, there are two solutions.

The first is to purchase a new sound card or headset, and it is clear that not everyone can afford this solution, especially laptop owners. Therefore, the second option is a little easier - just wait. Wait until new OS updates are released that will bring the very compatibility with devices that you need.

Of course, there is a third option - simply abandon the "dozens" and install the previous, more reliable version of Windows.

Playback devices

As you may have noticed, it often happens that after Windows 10 the sound disappeared. Now let's look at another way. Of course, it can be effective in extremely rare cases, but if there are no options, then any methods are already good.

To get started, right-click on the already familiar speaker icon and select "Playback Devices" this time. The “Sound” window will open in front of you, it will list all the connected ones. We are interested in the speakers, so we double-click on them.

In the window that opens, go to the "Levels" tab, there will be sliders. If they are set to a minimum, then rejoice, the problem was this. Set them to the maximum and save the settings safely exit.

However, if the sliders were twisted to the maximum before, then do not rush to despair, there is another option. In the same way, enter the "Playback Devices" and there check that there is a check mark next to the "Default Devices" inscription. If this is the case, you need to enter the "Device Manager". There, in the line "Sound, game and video devices" open the liner. Next, select your driver and double-click on it. In the window that appears, we need to click on the "Events" tab. There should be a message about the update, and if so, feel free to click - this is the solution to the problem.

Conclusion

Now you know if the sound disappeared in Windows 10, what to do and how to deal with it. However, it happens that none of these methods helps, then either give up the new Windows, or take the computer to a specialist. After all, digging into the system on your own, you can cause more harm.

Although the method using the iObit Driver Booster program often helps. It is advisable to download it immediately after installing any version of Windows.