Failed to parse android package what to do. "Syntax error" on Android devices: how to fix it? What is "error parsing android package"

Phones and tablets on the Android operating system often give errors when performing any action. Because of this, the device becomes either completely useless, or performs only part of the required tasks. But you should not immediately take the phone to the service, many errors are corrected very easily, their solution is feasible for an ordinary user, without special education, and does not incur any monetary costs. For example, to fix an error when parsing an Android package, just use the instructions below.

What is "error parsing android package"

Before you begin to solve the problem, you need to know what it is. Error while parsing the package - a problem when installing the program. If during the installation of the application the device for some reason cannot continue this process, it will automatically display this message and stop the installation. It will look like this:

Causes of the problem

There are only a few reasons why something could go wrong when installing the application:

The version of Android for which the program being installed was written does not match the version of Android installed on your phone. For example, you have a phone with operating system version 3.0, and the program was written for version 4.0.3. If the version of your Android is higher than the version for which the application was written, no error will occur.
The application at the time of installation was not fully downloaded or downloaded with an error in the installation apk file.
There are viruses on the phone that interfere with the installation process.

elimination

The solution to the problem will depend on the reason why it appeared.

Differences in firmware versions

Let's start with the case when the firmware version of your phone is lower than the version for which the program was written. To make sure this is the problem, first check what version of Android you have.

Scroll down and go to the "About phone" item.
Click on "Device Information".
Here is the item “OC Android Version”, in which the numbers we need are indicated.

Now on the site from which the application was downloaded, we are looking for the words "Required version of Android". It usually looks like this:

If you need a version higher than what you have, try to find the same application for your other firmware version or update your phone. To update, follow these steps:

Open phone settings.
Go to the "About phone" item.
Click the "System Update" button. If your phone model supports a newer version, it will be found and installed automatically.

Problems with the installation file

A syntax error may occur if the file is damaged during download or unpacking. Perhaps it was written with an error in the code originally. In this case, one solution is to download the file again or from another source. If the situation persists, try changing the browser or downloader you are using.

The occurrence of an error due to viruses

If the previous methods did not help, you should think about the presence of viruses on the phone. This is very easy to check:

We go to the Play Market and look for the free Dr. Web Light.
Install and open it.
Press the Scanner button.
Press the Full Scan button.

If the antivirus detects a virus, delete them and continue using your phone. If you have tried all the methods and none of them solved the error, then there is only one thing left - to carry the device to the service for it to be checked by specialists.

Video Tutorial: How to Fix Parse Parsing Syntax Error on Android

A syntax error may occur due to the incompatibility of the phone version with the one for which the program was written, due to damage to the installation file or viruses in the phone. For each reason, there is a solution that will help get rid of problems, but sometimes it is still worth using the services of a specialist from the service.

Android OS users under certain circumstances may see a message on their device: "There was a problem parsing the package." How to fix such a failure, what are its features and causes, we will describe further. In many ways, the popularity of such a platform is provided by an extensive collection of applications.

General information

To begin with, a few words should be said about the features of the operating system, which will help to quickly resolve the failure indicated by the message: "There was a problem parsing the package." "Android" is an open source platform, which is convenient for the creators of all kinds of software. This fact also had a positive effect on the demand for the system.

Often, when Android users are considering migrating to a different mobile OS, they first evaluate the range of apps before making a decision to migrate. However, with all the advantages, the platform is not immune from failures.

Error: "There was a problem parsing the package" is one of the oldest and most common problems that owners of these devices face. This message usually occurs when you try to install an application on a mobile phone.

If you try to proceed with the installation of the selected software by making changes to the manifest file, this will most likely not resolve the failure. Artificially reducing program requirements on the system is not a good idea. Next, we will talk about more effective solutions.

Causes

First you need to figure out why the device says: "There was a problem parsing the package." There are several reasons for this failure. First of all, the message may appear after making changes to the manifest file related to the selected application. For example, if you adjust the requirements for the version of Android.

The next reason is the corruption of the .apk file. The failure can also be caused by installing third-party applications obtained from unknown sources if the smartphone settings do not have permission to do so.

The error may be caused by the incompatibility of the Android version of the device with the requirements of the selected application. Another reason could be security settings. They may prohibit the installation of any third-party software.

Checking the manifest file

Now let's see in practice how to fix the problem if there is a problem parsing the package. The first solution is intended for users who use special tools to make changes to application files such as manifest.

If you made any changes to the AndroidManifest.xml element before the crash, you must restore the material to its original state. Before doing anything, you should make sure that the name of the .apk file has been changed. If this is the case, you must return the previous name to the specified element.

When the reverse renaming is completed, we again try to install the application on the device. Check if the error is gone. There may also be a problem with the application code. Diagnosing the exact cause in this case is very difficult. You can resort to an alternative way to install the selected application, for example, from another device.

Cancellation of bans

To resolve the message: "There was a problem parsing the package" you must allow the installation of software from unknown sources. The Android operating system may impose a ban on the specified action based on applicable security requirements. In this case, you can only get new apps from the Google Play Store.

This restriction is justified by the fact that installing third-party software from unknown sources can damage the device. If in this case, try to install the .apk file, it will fail. You can fix the error by bypassing the ban.

There is an item in the device security settings that allows you to allow installation of software from unknown sources. We perform just a few steps:

Go to the "Settings" section.
Select the "Security" item.
We find the line "Unknown sources".
Unblock the download using the checkbox.
If the device issues a request, we confirm our decision using the "OK" button.
We return to the folder in which the .apk file we need is located. Click on it and install the application.

Connection

If you receive a message that there was a problem parsing the package, you can fix it by using USB debugging. Such a measure cannot be called necessary. However, a number of users claim that the failure can be fixed in this way.

Additional funds

What should you do if there is a problem parsing a package? This can be fixed in other ways as well. For example, by disabling the antivirus. It is he who can block the installation. As a result, the described error occurs. Most antiviruses try to block access to the device for applications that, in their opinion, may look suspicious or untrustworthy.

So, temporarily disable the protection system. We try again to install the .apk file. The error message may disappear. The failure can also occur if the selected .apk file is corrupted.

In this case, download the application again. Then we install it. The error can be fixed. You should also make sure that the file has been downloaded completely. To do this, we compare the sizes of the uploaded and proposed file.

Android OS is the most popular OS for smartphones today, and this is largely due to the extensive collection of applications. In addition, the Android platform is an open source operating system, which is very convenient for developers of all kinds of software and is also one of the reasons for its popularity. Thus, if an Android user thinks about switching to another mobile OS, he will first of all look at the range of applications and only then will he decide whether to switch or not. However, even with all its advantages, the Android OS is not immune from errors, and users periodically encounter them.

Syntax error on Android devices is one of the oldest and most common errors faced by Android device owners. The error usually appears when trying to install an application on a mobile phone. Her message looks like this: Syntax error. Error while parsing packages". It should be understood as follows: “the application cannot be installed on your phone due to a parsing problem”

If you continue to try to install the selected software by making changes to application manifest file, you are unlikely to get rid of the error. It is not a good idea to artificially reduce the requirements of the program to the system. Today we decided to thoroughly understand the probable causes of the error and offer you several ways to fix it easily and safely.

Causes of syntax error in Android:

Before we start fixing the error, let's look at what might be causing it. To date, known several of these reasons:

Making changes to the manifest file of the application (for example, changing the requirements for the version of the Android OS).
Damage or incomplete download of the .apk file.
Downloading and installing third-party applications from unknown sources in the absence of permission for such actions in the smartphone settings.
Incompatibility of the Android OS version or smartphone hardware with the requirements of the application being installed.
Blocking the installation of any third-party applications with security settings.

Method 1: Checking the application's manifest file

This solution is intended only for users who use programs to make changes to application manifest files. Thus, if you are one of them and have made any changes to the application's AndroidManifest.xml file, you need to try to restore it back to original state"default". Before doing anything, make sure that the name of the .apk has been changed. For example, if the original.apk was named original.apk and you renamed it original1.apk then you might have to rename it back to its original name, which is "Original.apk".

Once the renaming is done, try to install the app on your phone again and see if the package parsing error is gone.

There might be a problem with application code. It is very difficult to diagnose a specific cause in this case, and there are no universal methods for solving the problem - here you either have to deal with it for a long time and seriously, or follow the path of least resistance using an alternative method of installing the selected application (for example, from another device).

Method 2: Allow installation of apps from unknown sources

In accordance with security requirements, an Android smartphone may prohibit the installation of third-party applications and software from unknown sources, allowing you to do this only from the Google Play Store. The ban is due to the fact that installing third-party applications from unknown sources can damage your phone.

So, if you are trying to install an .apk file, you may encounter an "error parsing package". To fix the error and bypass the ban, you need allow installation of applications from unknown sources. The corresponding item is available in the security settings of the phone.

Go back to the folder where the .apk file is located. Click on it and install the application.

Method 3: Enable USB Debugging

Enabling USB debugging is not really necessary to install Android apps using an .apk file. But some users claim that they solved the problem with a syntax error on Android in this way.

Method 4: Disable Antivirus

A syntax error can also occur if your antivirus program blocking the installation. Most antiviruses try to block the installation of applications that they think may look untrustworthy or suspicious. So, if you are trying to install an .apk file, the reason for the error may be that your antivirus application is blocking the .apk file, preventing the installation of "suspicious" software.

Try temporarily disabling your antivirus and try installing the .apk file. If the reason is guessed correctly, the installation will proceed without problems and error messages when parsing the android package.

Method 5: Damaged or incompletely downloaded APK file

The error can also occur due to a corrupted .apk file. Try downloading the latest APK file and install the app. Perhaps this will help resolve the error. Also, make sure you download complete file- for this, it is enough to compare the sizes of the proposed and downloaded file. Partially downloading the .apk file is bound to result in a parsing error during application installation.

Method 6: Application incompatibility

Some programs do not support older versions of the Android operating system. Some applications are incompatible with outdated device hardware. In both cases, when you try to install the app, you get an Android package parsing error. For example, when you try to install an application that requires both above on a smartphone with . In order not to get into a similar situation, carefully read the description of the application on the Google Play Store, especially in the part where the system requirements are given.

Today we looked at a number of ways to solve a syntax error and found out the reasons for its occurrence. If you have encountered it on your device and successfully overcome it, please tell us about your experience in the comments. Perhaps it is your method that will be saving for some of the users.