Installing the official firmware on Samsung Galaxy S4 i9500. Firmware for Samsung Galaxy S4 Samsung Galaxy S4 Update

Instructions for installing the official single-fuel firmware on Samsung Galaxy S4 (GT-i950x).

Drivers and programs

Attention!

To set the official stock firmware on the Galaxy S4 and return the phone status ("Settings"\u003e "About Device"\u003e "Properties"\u003e "Device Status") to "Official" after switching from a custom firmware and thereby return the opportunity to get the air updates enough Follow the instructions provided.

Installation Instructions

Unpack the downloaded archive to the folder with ODIN PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, and "SS_DL.DLL" can be deleted.

Run the device data reset.
To do this, go to the settings on the "tab" Accounts "In the section" Archiving and reset", Choose the item" Reset device"And click the" Delete everything" The phone will be rebooted.

Run ODIN PC on behalf of the administrator.

Translate the device to download mode ( Download Mode.).
To do this, you must simultaneously press the volume key, the home button and the power button. Then wait until the phone restarts and accept the warning by pressing the volume key.

In such a state, connect the smartphone to the computer. In Odin should light up the inscription " Com.».

Press the " Ap."And choose the TAR-archive of firmware.

Points " AUTO Reboot."And" F.Reset Time." must be activated, but " Re-Partition.", If active - need to disable.

Press the " Start." The firmware installation process will begin.

At the end of the operation, if everything went successfully, "All Threads Completed Odin PC Log should appear. (Succeed 1 / Failed 0). " The phone must be restarted manually by holding the power button until the screen turns off. Initial loading of the device may take up to 5 minutes.
ATTENTION!
If the device is not loaded for a long time or a data reset was not made, it must be made from the recovery.
To do this, you must simultaneously hold the volume key, the home button and the power button. After downloading, select the item " WIPE DATA / FACTORY RESET", and then - " Reboot System Now." If after these actions, the device also freezes when loading, it is necessary to re-flash it.

If you are owner sAMSUNG smartphone Galaxy S4, then you can update it operating system before android version 6.0 Marshmallow. In our article we will share with you information about how you can do it.

Preparing for update

Thanks to a variety of alternative software, you can install software updates on your Galaxy S4, which Samsung no longer supplies. However, pay attention to the fact that such actions can disrupt the warranty on your smartphone, and you will fulfill them on your own peril and risk.

So, first you will need the Samsung driver for Windows PC, ODIN 3.10.7 and Heimdall. After downloading these two programs you will need to install them. Linux and Mac users can skip this step. Then you need to unpack heimdall and open it folder.

The next step is to start on S4 loading mode. To do this, turn off the smartphone and when you turn it on again, press and hold the "Volume Down", "Home" and "On" key simultaneously. Now you should click on the "Volume up" key to confirm the activation of the download mode.

After performing the above actions, check that your computer supports working with Heimdall. Open this program, Go to the Rider Utilities folder and click on the Detect icon. When the external devices discovered on the screen are displayed, you can continue. If any problems arose, then you may need to start the ADB Driver Installer and follow its instructions.

Running Recovery mode

The next step will be working with recovery mode (Recovery). This mode will allow you to interact with the sections of your smartphone - it is necessary to change the firmware and installation. system applicationsFor example, Google Apps.

Load the newest file Format.img Teamwin Recovery Project (TWRP Recovery). This version of Recovery has best support. Now go to the display. Move the above image file to the Heimdall folder. Now in the folder window, make the click right mouse button, after which it will appear command line. In this row, enter the following phrase:

heimdall Flash -Recovery Recovery.img -no-reboot

Instead of recovery.img, type TW and press the Tab key. Now the corresponding name of your recovery file will be automatically completed. If you see a message: Libusb error: -12, then in this case you will need to replace sAMSUNG driver USB. To do this, open the "Device Manager" in Windows, search for other devices, find and delete the MSM8960 driver. Then turn off uSB cable From the smartphone, install the driver and connect the cable again. Repeat steps for Flash. In case of a successful result you will need to restart Galaxy S4 in recovery mode. To do this, press and hold the "Volume Down" keys, "On" And "home."

Loading and installing firmware

After recovery installations We can go to the main process of the process and install the version of Marshmallow to your Galaxy S4. You can find the appropriate firmware on the Cyanogenmod boot page. In the CyanogenMod Build section, you will find zip files with so-called Snapshots of CM 12.1 or Nightly Builds of CM 13. The first type of assemblies is associated with the version of Android 5.1 Lollipop and is not the most modern but fairly stable. The second type of assemblies belongs to Android 6.0 Marshmallow, and such builds are updated almost daily, although they are somewhat lacking stability in the work. Choose the Zip file you want to install on your Galaxy S4.

If you do not want to skip Play Store. As your source of applications, in this case you will need an additional zip file containing Google Apps. The easiest way to find such a file on the OpenGapps.org website. Download ARM option for your Android version. We recommend Micro Package option containing an improved calendar and gmail.

Copy the downloaded zip file to your S4. In TWRP Recovery, make a change to WIPE ("Delete"), and then on Advanced Wipe ("Extended Delete"). Here you need to choose Partition Data and System ("Data and Systems" section) to remove the pre-installed version Samsung Android With your Galaxy S4. In the process of such removal, all your settings for applications will be lost, but your files and photos will be untouched.

After that, go to the TWRP Recovery launch screen and click on the Installation icon. Now you should open a folder with CyanogenMod and select PER SELECT ZIP. With PER Add More Zips, you can later install Google Apps. Make scrolling down the display to start the firmware process. During it, the contents of the zip file will be unpacked in previously cleared partitions. When the firmware process is completed, you will see the "Clear cache / Dalvik" message. Click this message to avoid errors in the start process. Next will happen automatic reset Systems. It will take some time, and you need to gain patience.

New smartphone setup

Since you lost your Google information, you need to re-configure your device. You will also need to enter Google and reinstall all your applications. In the future, you can enjoy updates for a long time that Samsung stopped producing. Note that such updates are installed automatically and do not require such a complex installation.

What do you think about modding?

What do you take in the case when the manufacturer ceases its support? You install update yourself or you prefer to buy new smartphone And forget about the old? Tell us about it in the comments.

Sooner or later, the moment comes when even such a mobile device as Samsung GT-i9505 Galaxy S4 can become outdated. In such cases, you can improve the performance of the smartphone using the firmware.

Why do you need firmware?

Increase gadget performance - thanks to updating the software, you can improve the parameters of the technically parameters of the phone, improve the quality of the pictures from the camera and enhance the gadget processor;

Device troubleshooting - Sometimes even the most qualitative and most popular models of mobile devices are flawed in software. Thus, you can get rid of errors and other different glitches;
Expansion functionality phone - you can significantly improve the functionality mobile device.

How to flash gt-i9505?

If you are guided by all the points listed below the firmware instructions, then in the very near future your mobile device will significantly increase the functionality.

Charge your smartphone;
Create a hard disk directory to download files. An important point is that the name of the catalog should not contain symbols of Cyrillic;
Load all the files you need. Before downloading, it is recommended to disable antivirus;
If on yours personal Computer , it should be either deleted, or disable it (for this, start the task manager using the Ctrl + Alt + Del digit combinations and complete all the processes where the KIES mark is worth);
Install required driversMore precisely, Samsung USB Driver for Mobile Phones v1.5.29.0.exe;
Remove files from the archive to the directory previously created. To do this, download and unzip odin3_v3.09 and i9505xxufna1 (firmware for Samsung Galaxy C4);
The next action will be the launch of the mobile device in the download mode mode. To do this, turn off the smartphone. Next, press the "Power" key, "volume down" and "home" key. After you see a pop-up window, click the "Volume Up" button. If you saw on the display of your phone of a green robot, then you did everything right;
Connect your smartphone to a personal computer;
Run Odin3 v3.09;
IN open program You need to go to PDA. Next, you need to find and select the i9505xxufna1_i9505oxafna1__i9505xxufna1__home.tar.md5 file. An important point is that the check mark opposite the re-partition should not be installed;
Click on the start button;
After installation, you need to start the gadget in the recovery mode (this can be done using the "Power" key, "volume up" and "home" keys). Next, you must perform the operation of Wipe / Factory Reset;
Restart your smartphone.

Conclusion

It should be noted that all the files you need to be installed on top of the original version. software Mobile device.