Firmware j2 prime in one. Firmware Samsung Galaxy J2 Prime SM-G532

Samsung Galaxy J2 Prime nSM-G532F is a branded smartphone running on... Here you will find out the characteristics, how to get root or reset the settings, and you can also download firmware (for Odin, for example) and instructions for Samsung.

Root Samsung Galaxy J2 Prime nSM-G532F

How to get root for Samsung Galaxy J2 Prime nSM-G532F see instructions below.

If the applications did not help, ask in the topic or use the full list of root utilities from the topic header.

Characteristics

Type: smartphone
Operating system: Android
Case type: classic control: mechanical/touch buttons
SAR level: 0.53
SIM card type: micro SIM
Number of SIM cards: 2
Multi-SIM operating mode: alternating
Weight: 160 g
Dimensions (WxHxD): 72.1x144.8x8.9 mm
Screen type: PLS color, 16.78 million colors, touch
Touch screen type: multi-touch, capacitive
Diagonal: 5 inch.
Image size: 960x540
Pixels per inch (PPI): 220
Automatic screen rotation: yes
Camera: 8 million pixels, LED flash
Camera functions: autofocus
Aperture: F/2.2
Video recording: yes
Front camera: yes, 5 million pixels.
Audio: MP3, AAC, WAV, WMA, nFM radio
Headphone Jack: 3.5mm
Standard: GSM 900/1800/1900, 3G, 4G LTE
LTE bands support: 2100, n1800, 850, 2600, 900, 800 MHz
Interfaces: Wi-Fi 802.11n, Wi-Fi Direct, Bluetooth 4.2, USB
Satellite navigation: nGPS/GLONASS
Processor: 1400 MHz
Number of processor cores: 4
Built-in memory: 8 GB
Amount of memory available to the user: 3.30 GB
RAM capacity: 1.50 GB
Memory card slot: yes, up to 256 GB n (combined with a slot for a second SIM card)
Battery capacity: 2600 mAh
Battery: removable Talk time: 12 hours Music listening time: 59 hours
Charging connector type: micro-USB control: voice dialing, voice control
Airplane mode: yes
A2DP profile: yes
Sensors: proximity
nFlashlight: yes

Firmware for Samsung Galaxy J2 Prime nSM-G532F

Official firmware [stock ROM file] -
Samsung custom firmware -

If custom or official firmware for Samsung has not yet been added here, then create a topic on the forum, in the section, our specialists will quickly and free of charge help, including. with backup and manuals. Just don’t forget to write a review about your smartphone - this is extremely important. Firmware for Samsung Galaxy J2 Prime nSM-G532F will also appear on this page. Please note that this Samsung model requires an individual ROM file, so you should not try firmware files from other devices.

What custom firmware are there?

CM - CyanogenMod
LineageOS
Paranoid Android
OmniROM
Temasek's

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK(MoKee)
FlymeOS
Bliss
crDroid
Illusion ROMS
Pacman ROM

Problems and shortcomings of a Samsung smartphone and how to fix them?

If the Galaxy J2 Prime nSM-G532F does not turn on, for example, you see a white screen, hangs on the splash screen, or the notification indicator only blinks (possibly after charging).
If stuck during update / stuck when turned on (needs flashing, 100%)
Doesn't charge (usually hardware problems)
Does not see the SIM card (SIM card)
The camera does not work (mostly hardware problems)
The sensor does not work (depends on the situation)

For all these problems, contact (you just need to create a topic), specialists will help for free.

Hard Reset for Samsung Galaxy J2 Prime nSM-G532F

Instructions on how to do a Hard Reset on the Samsung Galaxy J2 Prime nSM-G532F (factory reset). We recommend that you familiarize yourself with the visual guide called on Android. .

Reset codes (open the dialer and enter them).

*2767*3855#
*#*#7780#*#*
*#*#7378423#*#*

Hard Reset via Recovery

Turn off your device -> go to Recovery
"wipe data/factory reset"
“yes - delete all user data” -> “Reboot System”

How to log into Recovery?

hold down Vol(-) [volume down], or Vol(+) [volume up] and the Power button
A menu with the Android logo will appear. That's it, you are in Recovery!

Reset settings on Samsung Galaxy J2 Prime nSM-G532F You can do it in a very simple way:

Settings->Backup and reset
Reset settings (at the very bottom)

How to reset a pattern key

How to reset your pattern key if you forgot it and now you can’t unlock your Samsung smartphone. On the Galaxy J2 Prime nSM-G532F, the key or PIN can be removed in several ways. You can also remove the lock by resetting the settings; the lock code will be deleted and disabled.

Reset graph. blocking -
Password reset -

Instructions for installing the official single-file firmware on the Samsung Galaxy J2 (SM-J200x).

Drivers and programs

Attention!

To install the official stock firmware on the Galaxy J2 and return the phone’s status (“Settings” > “About device” > “Properties” > “Device status”) to “Official” after switching from custom firmware and thereby returning the ability to receive updates over the air, just follow the instructions provided.

Installation instructions

Unpack the downloaded archive into a folder with Odin PC for convenience. The file in the ".tar" or ".tar.md5" format must be left, but the "SS_DL.dll" can be deleted.

Reset your device.
To do this, go to the settings section " Backup and factory reset", select the item " Reset data» > « Reset the device", enter the PIN code (if one is set) and click on the button " Delete everything" The phone will reboot.

Run Odin PC as administrator.

Put your device into download mode ( Download Mode).
To do this, you need to simultaneously hold down the Volume Down key, the Home button and the Power button. Then wait until the phone reboots and agree to the warning by pressing the Volume Up key.

In this state, connect the smartphone to the computer. In Odin the message “ COM».

Click on the “ AP» and select the TAR firmware archive.

Items " Auto Reboot" And " F.Reset Time" must be activated, A " Re-Partition"if active - must be disabled.

Click on the “ Start" The firmware installation process will begin.

At the end of the operation, if everything was successful, the message “All threads completed. (succeed 1 / failed 0)". The phone must be restarted manually by holding down the power button until the screen turns off. It may take up to 5 minutes for your device to boot up initially.
ATTENTION!
If the device does not boot for a long time or the data has not been reset, it must be performed from recovery.
To do this, you need to simultaneously hold down the Volume Up key, the Home button and the Power button. After downloading, select " Wipe data/Factory reset", and then - " Reboot system now" If after these steps the device also freezes when loading, you need to reflash it again.

Instructions for flashing the Samsung Galaxy J2 Prime SM-G532 smartphone and installing custom recovery, obtaining root rights. Or just how to reflash Samsung J2 Prime?

If suddenly you do not like the software of your Samsung Galaxy J2 Prime SM-G532 smartphone, using these instructions you can change the official version of Android to a more recent one or install a completely custom firmware, which will expand the functionality of the device and increase the speed of the robot. After receiving root, you can free your mobile from a large number of unwanted applications and thereby increase the amount of memory on your phone. Below in the instructions you can download the firmware for the Samsung Galaxy J2 Prime SM-G532 phone.

Flashing custom recovery or unofficial firmware will trigger the Knox counter and consequently void the warranty on your smartphone. Therefore, first think about whether you need it.

Installing the official firmware on the Samsung Galaxy J2 Prime SM-G532 smartphone using the Samsung Odin service program. In order to install new firmware on your smartphone, you first need to download several files to your PC:

Download the latest Official firmware for Samsung Galaxy J2 prime SM-G532f, selects the firmware for the region you need from the archive.

Before flashing the phone, you first need to decrypt it; if this is not done, after flashing the firmware you will get a beautiful metal “brick”.
To remove the lock from the Samsung Galaxy J2 Prime SM-G532, you need to disable the reactivation lock. Go to “Settings” - “Lock screen and protection” - “Find phone” and disable “Activation Lock.” Before and after the firmware update procedure, you need to do a general reset of the device to factory settings to avoid all sorts of errors and interface slowdowns.
When performing this procedure, all your data and files will be permanently deleted.

Option 1: On the device, open “Settings” “Backup and reset” “Account” “Reset data”> “RESET DEVICE” and click “Delete everything”
Option 2: Turn off the device, press and hold the “Volume Up”, “Home (Central)” and “Power” buttons and after a few seconds the “Recovery” menu will appear. In the “Recovery” menu, select “Wipe data/factory reset” -> “Yes – delete all user data”, deleting all user data will begin. After the process is completed, select “Reboot system now” and the device will begin to reboot.

You can skip this step, but remember! If you do not reset the data, after the update, “lags” and unstable operation of the device as a whole may appear due to the tails of the previous firmware, and recently, before completely resetting the smartphone, you also need to delete your Google account, otherwise the smartphone may be blocked.

Unpack and install the previously downloaded drivers for Samsung J2 Prime on your PC. Then unpack the archive with Odin and the firmware.
We launch the program for flashing j5 prime Odin as an administrator. To do this, hover over Odin and right-click and select “Run as administrator”, then click “Yes”.

After launching Odin, arrange the firmware files in the following order:
The file BL……….tar.md5 is inserted into the “BL” field
The AP……….tar.md5 file is inserted into the “AP” field
The file CP……….tar.md5 is inserted into the “CP” field
The CSC file……..tar.md5 is inserted into the “CSC” field

We check that the “checkmarks” are only in the “Auto Reboot” and “F. Reset Time"

We put the Samsung Galaxy J2 Prime SM-G532 phone into firmware mode. To do this, turn off the phone and then press and hold the “Volume Down”, “Home” and “Power” buttons and after the menu with a yellow triangle appears, press the “Volume Up” button
We connect the smartphone using the supplied USB cable to the PC and in the Odin program, the inscription “COM” should appear in the upper left corner, highlighted in blue, then press the “Start” button.

Note: If for some reason your PC does not recognize your device, try reinstalling the driver and/or try other USB ports.

The smartphone firmware process has started. After successful firmware, the device will reboot automatically and the message “Finish” will appear in the Odin program.

Installing custom recovery TWRP Recovery on Samsung Galaxy J2 Prime SM-G532

And so let's start installing custom recovery on Samsung j2 Prime

If you have not yet installed Samsung drivers on your PC, download and install them. Then connect your smartphone to your computer using a standard USB cable. After the PC recognizes the phone, additional drivers and updates will be installed automatically.

We will need the Odin 3 program, download Odin

Turn off your smartphone, and then (with it turned off) press and hold the “Volume Down” + “Power” + home key until the phone boots into Odin mode (Download Mode). You will see a warning, confirm your desire to boot into this mode by pressing the “Volume Up” key.

With your phone in Odin Mode, connect it to your PC using a standard USB cable.

Run the Odin 3 flasher program on your PC as an administrator

In the AP line, indicate the path to the previously downloaded file with custom TWRP recovery J2 Prime TWRP Recovery with the extension “.img.tar” and select it

Uncheck “auto reboot” and press start (the phone should be flashed, flashing time should not be more than 30 seconds, the result should be like this (succeed 1/ failed 0);

We do not touch the Smartphone until the firmware process is complete; usually the firmware does not last longer than 30 seconds.

Without turning the gadget into working mode, directly from the Download mode we go to the newly installed TWRP Recovery by holding down three buttons (volume up + home + power button, when the Samsung message appears, release the buttons).

All! We rejoice.

Installing custom firmware on Samsung Galaxy J2 Prime SM-G532

To install custom firmware on a Samsung J2 Prime SM-G532 phone, you must have custom recovery TWRP Recovery, if you don’t have it, see the point above.

Download to your PC any custom firmware that you like (for TWRP Recovery in **.zip format), for example:

Then copy the firmware file to the phone's memory. Then turns off the smartphone and boot into custom recovery TWRP Recovery (with the phone turned off, hold down the power buttons + volume up button + HOME)
And through TWRP Recovery install the firmware file:

Go to Wipe and select Advanced Wipe
Check the boxes: “Davlik Cache”, “System, Data”, “Cache”, “Android Secure”.
Doing “Swipe to Wipe”
Go to Install -> Select the memory where the custom firmware is located, and select Swipe to Confim Flash, the installation will begin
After installation in recovery, select the Reboot -system item and the device will begin rebooting.

Ready! You have successfully flashed custom firmware! reboot your smartphone and use it with pleasure (without paying attention to the bugs of the custom firmware)

Getting ROOT on Samsung J2 Prime G532 Marshmallow

Download the SuperSu.zip program and copy the installation file to the phone memory

Put your smartphone into custom recovery mode, to do this, turn off the device and then hold down the “Volume +” buttons, the “Home” button + the “On” button.

In the TWRP Recovery Mode menu, select Wipe -> Advance Wipe -> and select Cache Data

After removing the garbage, we return to the main TWRP menu, and there we select the Install item, then select the installation file SuperSu.zip in the directory and confirm the desire to install.

After successful installation of the application, the phone reboots. In the program menu you will have

SuperSu App, which actually makes it possible to manage Root superuser rights.