To start working with AppleWatch, you first need to synchronize them with your Applе Iphone. Unfortunately, Apple iPad does not support AppleWatch. If we are talking about compatibility with versions of iOS, then "smart watches" work with all models with version iOS8.3. the program for working with the clock is already installed here.

We go to the Apple watch application on the iphone.

The process of connecting the watch to a smartphone is very bright and interesting. It looks like this:

There are a couple of nuances that you should know about:

1) First of all, turn on the clock by holding the button below the wheel. After switching on, select the language. On the phone, press “start pairing” and place the SmartWatch so that it can be seen in the iPhone camera. And the screen should fall into the intended area. We will not delve into how the developers managed to do this. But thanks to this amazing animation, the smartphone creates a connection.

2) What I want to say is that there are no problems in connection, the device is very sensitive.

3) When the connection is established, you need to choose the hand on which you will wear the watch. In addition, at this stage, you need to enable location services and specify the AppleID. If you don't have an AppleID, you can read the instructions on how to create an AppleID.

4) Until the watch is officially supplied to the post-Soviet space, there is simply no opportunity to choose the Russian language. Everyone's favorite Siri will have the same problem.

5) You can unlock your watch at the same time as your iPhone. This is incredibly convenient, since due to the small size of the numbers on the watch, it is not so convenient to enter them.

6) The last thing to do is install programs on AppleWatch and sync with your phone. It is possible to automatically install all applications that are in your iPhone, but only certain ones. The first installation option is described here. Synchronization in this case takes a couple of minutes. What is the result? There are such items: "My Watch", "View", "Search" and "Selection".

7) The first part is the settings and installed programs. Something similar to the settings in the iPhone.

8) In the "Preview" you can watch a video about the capabilities of AppleWatch. It is very similar to the AppStore, and is very similar in design.

9) "Search" is what makes it possible to select in the store.

These are the main key points to know when getting started with AppleWatch.

Video. Apple Watch to iPhone.

The devices are gradually sending out to users, and therefore it's time to discuss setting up the clock and syncing it with the iPhone.

The first step is to turn on the device. To do this, press and hold the side button until the Apple logo appears on the screen. After that, a menu will appear in which you can select the language.

Then a window will appear in which you will be prompted to launch the Apple Watch application on the iPhone (it is automatically installed when the firmware is updated to iOS 8.2).
After the application is open, press the button Start Pairing- a specific animation will appear on the screen.

At the same time, after starting the Apple Watch program on your iPhone, also click in it Start Pairing.
Further, two methods of synchronization are possible - automatic with the help of a camera and manual. In order to use the first method, you need to direct the iPhone camera at so that the watch display is within the yellow square on the smartphone screen. In this case, the devices are automatically synchronized.

In order to use the manual method, you must click on the symbol " i»In the lower right corner of the display. The identification number of your gadget will appear on the screen. You should click on the menu in the application on your smartphone Pair Apple Watch Manually and manually enter the clock number.
After that, the synchronization will be completed.

Next, in the application on the iPhone, click on the button Set Up Apple Watch and in the window that opens, select on which wrist you will wear the watch.
Next, a standard window will appear in which you should indicate that you agree with all the terms of the company.
After that, a screen will appear with a field in which you must enter the password for your Apple ID.
The next window will provide information about the geolocation services of your device. You cannot refuse to use it, so click on the button OK and move on to the next step.
Next, a message appears stating that you can use the Siri virtual assistant on the watch to write messages and calls. Press again OK.
The next window will ask you if you agree to send (automatically) Apple bug reports for improvement. We choose any answer and move on.
Now you have the opportunity to create a password for your watch. This function is necessary in order to protect data if the gadget is lost or stolen. The system will ask you for a password every time you put the watch on your wrist.
Creating a password is an optional step, but if you decide to add it, then click Create a Passcode... Then you must enter the code twice on your watch.

Thanks to the password, you will be able to unlock from your iPhone. When you enter a password on your smartphone, the watch is automatically unlocked (if it is on your wrist). If the watch is not with you, you will have to enter the password each time in order to use the data on. If you agree to these terms, then click Yes and go to the next step. It is important to know that you can refuse to use a password at any time by changing this item in the settings.

Next, you will be able to install the versions of the watch app already installed on your smartphone. You can also postpone this step for later.
And finally, the last setting item is syncing with iCloud. Photos, calendars, notes can now be viewed on your watch. In addition, your Email accounts that you use on the iPhone are synchronized. This stage may take some time.
Configuration and synchronization is complete and the device is ready to work.

(or pair with another iPhone), then you will certainly face the need to untie the device from the iPhone (unpair). It is very simple to do this: you just need to perform a number of simple actions, and this can be done even in the absence of a smartphone.

You may also need to unlink Apple Watch from iPhone if one of the gadgets malfunctions.

How to untie (unpair) Apple Watch from iPhone if both devices are in front of you - method 1

1 ... Place both gadgets next to each other;

2 ... Open the Apple Watch application on the smartphone;

3 ... In the window that opens, at the bottom, there will be a menu “ My watch"- click on it;

4 ... After that, you should click on the item " Apple Watch", On the next screen you must click on "I".

5 ... By clicking on the " Unpair Apple Watch», You must confirm the cancellation of device synchronization, after which all data about the clock will be deleted from the communicator.

How to untie (unpair) Apple Watch without iPhone - method 2

It is possible to untie the watch from the smartphone, even if both devices are not close to each other (for example, if the iPhone is lost). To do this, go to the application " Settings"On Apple Watch (gear icon), go from there to the section" The main", Select the menu" Reset"And click on the item" Erase all content».

This action will reset the Apple Watch to factory settings (all data will be deleted) and also unpair the existing iPhone pair.

How to untie (unpair) Apple Watch from iPhone, if the watch has a passcode, but you forgot it

There is a method to unlink the Apple Watch from the iPhone, even if a passcode was set on the watch, which you accidentally forgot. For this:

1 ... Set Apple Watch to charge.

2 ... Press and hold the side button until the slider appears Off.

3 ... Press hard on the slider Off and swipe up, then a button will appear on the watch screen. Erase content and settings.

4 ... Click on the button Erase content and settings and confirm the action. The watch will be reset to factory settings (all data will be deleted), and the Apple Watch will unlink from the iPhone.

In the fall of 2014, Apple introduced the world to the "smart watch" Apple Watch. When buying them, many actions will become available to you, provided that you have an apple smartphone no older than model 5. Apple Watch is connected to iPhone and has the ability to exchange information.

Manufacturers have taken care of features such as:

• sending messages (voice control, the watch does not have the usual keyboard due to its size);
• pulse diagnostics;
• the ability to use Siri functions;
• reading simple emails, deleting them, and highlighting;
• the ability to download music up to 2GB in size;
• synchronization with iPhone, exchange of information and applications supported by the Watch.

Display 1.5 inches or 1.32 in the smaller model. Protected by sapphire crystal. Reacts to pressing force.

On the side of the device there is a wheel button that you use to perform basic functions and a floating key at the bottom (for calls and messages). See the photo.

2 core processor coupled with GPU. A reasonably good navigation system is provided with a GPS receiver. Communication takes place via Bluetoot and Wi-Fi. In 2016, Apple released the second generation Apple Watch Series 2.

Setting up Apple Watch

If you are using a non-updated iPhone prior to 5 (earlier versions do not support the watch), then updates to the Watch applications are not required. Accordingly, if you follow the updates of your smartphone, then they are also necessary on the watch. Before you start setting up your watch, make sure they are charged.

How to connect Apple Watch to iPhone

Let's take a look at how to pair your Apple Watch. To do this, follow your intuition and device prompts, you can easily figure out how to create an iPhone and Watch binding.

So, if the watch is charged less than 60%, then it needs to be charged. The time taken to recharge will be equal to one hour, but sufficient recharging will be required while the devices are connected.

How to turn on Apple Watch

Press the button on the side. A language prompt appears on the screen. After determining the interface language, the device will switch to the mode of creating a binding to the smartphone.

Launch the Watch program and press the pairing button that appears, bring the phone camera to the image on the watch (the devices should be nearby while the synchronization is in progress, as in the photo).

Then follow the iPhone activation prompts. Set up as new or restore (if not the first watch) and select your hand (left or right). To use the Digital Touch and Handoff functions, you must enter your Apple ID password in the field that appears. You will be prompted to turn on iPhone search. Turn it on.

Synchronization

• Diagnostics, geolocation and Siri must be in sync.
• Create a password and determine if the iPhone will automatically reset the lock from the watch.
• When you click Install All, the programs from your phone will appear on the Watch, when you click Later, only basic information appears. Synchronization time depends on the number of linked programs.
• When the previous operation is completed, the device will beep. On the Internet, you can always find a video review on this topic.
• Installing updates on the watch.
• Open “My Watch” in the Watch application
• Then "Basic" and "Software Update"
• Further messages about updates will appear (if, of course, they are required). Install following the prompts.
• If all compatible apps on Apple Watch weren't set up automatically from My Watch, you'll have to download them manually.
• You can set up notifications by clicking on "Notifications" in the item "My watch".
• It is possible to adjust the brightness of the screen through the section "Brightness and text size".

How to use Apple Watch

The screen is activated when you bring the watch to your eyes and goes out as soon as you take your hand away. You can find all the answers to questions related to the use and setting of the clock in the manual attached to them. The instruction in Russian describes in detail how to use the watch. On the web, you can find a video overview on how to set up a binding or how to set up a clock.

By activating the Activity App, you can control physical activity, rest time. The device notifies about the amount of time spent on walking or motionless state and reminds of a change in position. In the item "Health", you can track your condition.

When you press the wheel on the side once (see the first photo), it becomes available:

• turning on the screen;
• you can go from the main tab to the watch face;
• return to the main page while in the application;
• activate Siri
• with the help of "Preview" you can always be aware of your important affairs.
• If the Watch does not turn on, it is better to restart the wristwatch. How to restart Apple Watch is described in detail in the instructions.
• You can configure it again after which the devices are included in the work, and you already know how to configure.
• You can make an urgent call by pressing the side button or using a voice command. It is possible to send a template message.

Apple Watch 2 can be immersed in water for up to 30 minutes and no deeper than 1 meter. When creating the Apple Watch Series 2, the manufacturers of the epl company tried to take into account the needs of a modern person who wants to save time, but at the same time play sports, relax, work, and be aware of their affairs. But Apple warns against bathing in salt water with Apple Watch, while showering in smartwatches is not prohibited. The clock works even in water, as shown in the photo.

The watch does not have a camera for creating a photo, apparently due to the fact that the entire smart mechanism is in a small metal box.

Description of how to untie Apple Watch from iPhone

If there is a need to sell devices or change iPhones, you need to break their synchronization. This can be done without a smartphone by following a few simple steps:

• Bring the devices closer. Open Apple Watch.
• In the "My Watch" menu, go to Apple Watch and mark the letter "i" located opposite.
• Then click the "Unpair Apple Watch" item. Thus, all data will be deleted.
• Another way to decouple when devices are not nearby.
• We go into the clock settings.
• Click on "Basic".
• We press "Reset".
• And we erase all the data that was synchronized. This will reset the information to the factory settings.
• A way to unlink the watch from the iPhone if the password is forgotten.
• We put smart watches on charge.
• Press the wheel on the side and hold it until "Off" appears on the screen.
• We click on the shutdown and on the appeared "Erase content and settings". The data is deleted and the devices will be unlinked.

How to untie Apple Watch from iPhone (unpair): 3 ways. How to pair with an apple watch a second time

How to pair with Apple Watch. How to connect to iPhone or iPad

If you have already become the owner of a smartwatch from Apple, then you should connect your Apple Watch to your iPhone in order to take advantage of all the functions of the watch. This article will show you how to pair your Apple Watch. Also here you will learn how to connect your watch to your iPad, how to check if there is a connection between devices and what to do if Apple Watch cannot see the iPhone and the connection between them cannot be established.

How to pair with Apple Watch - pairing process

There are 2 ways to pair Apple Watch, iPhone - automatic and manual. The first way to connect gadgets is faster and easier, for it you will need:

If it is not possible to automatically create a pair (the camera on the smartphone does not work, other problems), you can do everything manually. How to manually connect Apple Watch to iPhone:

1. Place both devices next to each other.
2. Turn on Wi-Fi, or mobile network on your iPhone.
3. On the iPhone screen, tap the “Watch” app icon.
4. Turn on the “start pairing” function.
5. Then select the “manual installation” mode at the bottom of the screen.
6. Touch the “i” symbol.
7. The iPhone should now see your watch.
8. Then just follow the instructions of the program.

What iPhones does the Apple Watch work with?

It all depends on which watch model you have, but one thing is for sure - you will not be able to connect even the earliest smartwatch from Apple to an iPhone whose model is younger than 5s. Also, a prerequisite is the availability of a version of the iOS operating system.

Apple Watch Series 3 (GPS) and all earlier watches will work with iPhone 5s, or later phones with the latest version of iOS installed.

Apple Watch Series 3 (GPS + Cellular) will only work with iPhone 6, or a more modern device (7, 8, X) with the latest version of iOS installed.

How to check the connection between Apple watch and iPhone?

There are two ways to check for a connection - using a watch, or on the phone screen.

To check the connection on the watch display, you need to open the "Control Center" for this, swipe the picture of the main screen from top to bottom. If a crossed out iPhone icon or a red cross appears in the upper left corner of the watch, then the connection between the devices is not established. When using the "Watch" application on your iPhone to check the connection, you should go to the application, and open the Watch tab, it will contain information about the connection.

How to connect to iPad?

The principle of connecting Apple Watch to an iPad tablet is no different from the method of connecting to an iPhone smartphone, which you can familiarize yourself with above in this article.

What to do if Apple Watch can't see iPhone?

The first thing to do in this unpleasant situation is to check for a connection, as described above in this article, if there is no connection, then the problem lies precisely in this.

The smartwatch manufacturer offers several ways to solve this problem to choose from.

Method One: Reconnect

Try connecting your Apple Watch to iPhone again. For everything to go well, make sure that the devices are close to each other, it is also worth making sure that the iPhone is connected to Wi-Fi and Bluetooth, and "Air Mode" was turned off on the contrary. To do this, open the lower curtain of the device by swiping the screen from the bottom up. Pay attention to the circular images of Wi-Fi and Bluetooth? They must be active, the airplane image must be inactive.

Next, check the Apple Watch face. If you find an airplane icon, then “Airplane Mode” is on on your watch. In this case, go to the Control Center, to do this, swipe the dial from the bottom up and turn off Airplane mode by clicking on the airplane symbol.

Finally, restart your Apple Watch along with your iPhone.

If after that it is not possible to restore the connection, resort to the second method.

Method Two: Break and Re-create the Link Between Apple Watch and iPhone

1. In the watch settings, open “Settings”, then select the “General” tab and click “Reset”, then “Erase content and settings”.
2. In the Apple Watch app on your iPhone, you need to select My Watch and tap on the watch at the top of the display. There will be an “i” icon next to the watch symbol, click on it and select “Unpair Apple Watch” from the menu. Press twice to confirm the action.
3. Now pair your Apple Watch and iPhone following the instructions above again.

Method three: Apple tech support

If none of the above methods works, it is recommended to contact the Apple support service on the manufacturer's official website, or in the “ReStore” stores, or, if this is not possible, to the service center. Do not attempt to troubleshoot connection problems due to damaged devices yourself.

myapples.ru

How to re-pair Apple Watch

How to connect Apple Watch to iPhone. Complete instructions.

Apple Watch - setup and first impression

mi band 2 does not connect, synchronization of the fitness bracelet with the phone

Xiaomi Mi Band 1S not connecting / not syncing SOLVED THE PROBLEM SIMPLE!

Why the phone does not see the Bluetooth headset

iFhone 8 Commercial Leaked!

GoPro Hero 4, 5 & 3: How to connect a GoPro camera to an iphone and update the firmware

NEW LIFE OF OLD TV: POSSIBILITIES OF MODERN MEDIA PLAYERS

How to connect Sony SmartWatch if they are not supported by your smartphone

GoPro Hero 4 - how to connect to your phone - # 31

Also see:

• How to set a ringtone for iPhone
• How to transfer photos from iPhone to laptop
• Message iPhone what is it
• How to reset password on iPhone app store
• Installing mac os on a Macbook from disc
• Download vfeed like on iPhone for Android
• How to transfer a photo from a camera to an iPhone
• How to confirm mail on iPhone
• How to download the old version of Skype for iPhone
• iPhone 4 is not included in dfu mode
• How to clean an iPhone from scratches
• How to set up a bank card in iPhone
• How to return a photo to an iPhone after an update
• How to adjust screen resolution on iPhone 6 Taiwan
• The screen glows blue on an iPhone

Home »Choices» How to pair your Apple Watch again

iphones-4g.ru

How to get started with Apple Watch, pair and sync with iPhone

If you have already bought an Apple Watch or are just about to do so, this guide will show you how to make the initial setup, pair and sync your Apple smartwatch with your iPhone.

Although the official sales of Apple Watch started only on April 24, back in early March, Apple released the final version of iOS 8.2, which introduced a new Apple Watch app that allows you to pair an Apple smartwatch with an iPhone. In addition, the Apple Watch app can be used to make some settings for your smartwatch and sync data between it and your smartphone.

Initial Apple Watch setup

1. To start using Apple Watch you need to sync it with iPhone 5 or later with iOS 8.2 or later. 2. Go to Settings -> Bluetooth on your iPhone and make sure Bluetooth is turned on. 3. Make sure your iPhone is connected to Wi-Fi or cellular. 4. Turn on your Apple Watch. To do this, press and hold the button on the side of the watch (next to the Digital Crown) until you see the Apple logo on its screen. 5. Choose and set a language for your Apple Watch. You can scroll through the list of languages ​​using swipes on the screen or the Digital Crown. 6. After that, a window appears on the Apple Watch screen, prompting you to launch the Apple Watch app on your iPhone. 7. Make sure Apple Watch and iPhone are charged and close to each other.

How to automatically pair Apple Watch with iPhone

3. Align the yellow viewfinder on the iPhone display with the animation on the Apple Watch screen.

4. As soon as a message appears on the iPhone display that the pair has been created, click on the "Set up as new Apple Watch" button.

5. Depending on which hand you wear the watch on, choose one of the two options provided.

6. Confirm that you agree to the terms and conditions.

7. Enter your username and password for your Apple ID account.

8. Click "OK" after reading the information about geolocation services.

9. Tap OK after reading the Siri information.

10. Click OK after reading the diagnostic information.

11. Set a 4-character password for your Apple Watch. For added security, you will be prompted to set a 7-character long password. Select the option you want. Note that the password must be entered on your Apple Watch, not on the iPhone.

12. Choose if you want the Apple Watch to be unlocked together with the iPhone.

13. Choose if you want all available apps to be automatically installed on your Apple Watch. You can also skip this step and install them later.

14. After that, on the iPhone display, you will see that the synchronization with the Apple Watch is complete.

15. That's all. You've set up your Apple Watch for the first time, paired it, and synced it to your iPhone.

How to manually pair Apple Watch with iPhone

If for some reason you do not want to automatically pair Apple Watch with iPhone using the camera, you can create it manually. In this case, simply provide the name of your Apple Watch to initiate the pairing process.

1. Launch the Apple Watch app on your iPhone.

2. Click the Start Pairing button on your iPhone and Apple Watch.

3. Tap Manual Pairing at the bottom of the Apple Watch screen, then tap the i button to display the name of your Apple Watch.

After your iPhone detects your Apple Watch, follow the steps above one by one, starting from step 4.

Apple Watch instructions

If you have already bought an Apple smartwatch or are planning to do so, our other instructions for using Apple Watch may be useful to you:

How to get started with Apple Watch, pair and sync it with iPhoneHow to find and install an app on Apple WatchHow to remove an app from Apple WatchHow to turn on, turn off, or completely restart Apple Watch

newapples.ru

Owners of smart watches sooner or later are puzzled by questions about pairing Apple technology with each other. In 90% of cases, this is a question about how to pair an iPhone with an Apple Watch. This is not surprising, since the company supplying such equipment to the market has its own characteristics, which speak of the individualization of the approach.

Do not be intimidated by pairing or syncing your iWatch smartwatch with your iPhone or iPad, because it does not take much time and consists of just a few steps.
Photo: How to pair Apple Watch to iPhone?

Step by step instructions on how to connect Apple Watch to iPhone?

If you connect each step of connecting or synchronizing a smartwatch to another device from Apple, you get step-by-step instructions that will help a newbie user solve this problem. So, in order to successfully connect iWatch to iPhone, you need:

• turn on the watch by pressing the button on the side, it must be held for 1-2 seconds, in a word, until the Apple logo appears;
• after the company icon is displayed, on the accessory screen you will see a message in which you must select the language (there are 4 of them). Stop at which one you know best;
• followed by confirmation to create a pairing between Apple Watch and iPhone. It must be accepted;
• following the instructions, install the smartwatch application on the iPhone, go to it, select "Pair", and it should appear

appleiwatch.name

How to untie Apple Watch from iPhone (unpair): 3 ways

If you have a desire to sell your Apple Watch (or pair with another iPhone), then you will certainly face the need to untie the device from the iPhone (break the pair). It is very simple to do this: you just need to perform a number of simple actions, and this can be done even in the absence of a smartphone.

In contact with

You may also need to unlink Apple Watch from iPhone if one of the gadgets malfunctions.

How to untie (unpair) Apple Watch from iPhone if both devices are in front of you - method 1

1. Place both gadgets next to each other;

2. Open the Apple Watch application on the smartphone;

3. In the window that opens, at the bottom, the menu "My watch" will be located - you should click on it;

4. After that, you should click on the item "Apple Watch", on the next screen, you must click on "i".

5. By clicking on the "Unpair Apple Watch" button, you must confirm the cancellation of the device synchronization, after which all data about the watch will be deleted from the communicator.