How to jailbreak your iPhone: detailed instructions. How to jailbreak an iPhone: detailed instructions Without the help of a computer

How to install jailbreak?

Almost every year a jailbreak tool is released, which means jailbreak in English. This tool is designed for iPhone or iPad. At the very beginning, you need to figure out what a jailbreak is.

Jailbreak

Apple has a very strict policy with regard to its mobile devices, for which applications can only be downloaded from the AppStore, and setting for the "Desktop" is limited to just changing the "Wallpaper" and changing the location of the shortcuts. After a hack, which is not as bad as it sounds, Cydia is installed on your iPhone or iPad. It is just designed to access the necessary software. After installing it, a lot of functions will appear: installation of various mods that can greatly expand the functions of your device, switching between applications with swipes (i.e. finger taps), the ability to call quick settings, and also add music without iTunes. For example, Sbsettings provides quick access to device functions with just one swipe. Now the user will feel like the rightful owner of his gadget.

Anyone can use a jailbreak to jailbreak iOS security. Therefore, it is important to figure out how to install jailbreak ios 7.1 on your device.

Installing the app

The hacking procedure itself does not take much time, everything is very easy and simple.

Before you start, you need to back up your device to iTunes to be on the safe side.
Next, download the Pangu utility for OS X, which can be found at this link pangu.io, after installation, run the application. Be sure to disable the password on your device before starting the installation.
Then connect your device to your PC. The application will deal with the model and firmware version by itself. In the event that you do everything correctly, the Jailbreak button will be active.
Click on Jailberak, then immediately change the system date of your device so that the utility displays instructions on how to do it.
The next step is to open the "Settings" menu on the gadget and in the "General" - "Date and Time" section, turn off the automatic time setting and set: June 2, 2014, 8:00.
After this procedure, the Pangu shortcut will appear on the desktop of the device. Click on it and the utility will reboot your device.
The Jailbreak process is almost over. Never disconnect the device - it will reboot one more time.

The operation is complete. You have successfully installed Jailberak. Now, instead of the "Pangu" shortcut, you will see the "Cydia" shortcut on the device desktop.

If this scheme is not clear enough for you, then you can watch a short tutorial video on how to install a jailbreak. Do not think that this procedure will harm your device in any way. After restoring the firmware, Jailberak is automatically deleted, and you will again have a device with the official firmware without any signs of jailbreak.

The jailbreak utility has already been updated to version 1.1. There is a version for both OS X and Windows.

On July 27, the Pangu Team presented the English version of the iOS 9.3.3 jailbreak, albeit with some nuances. The fact is that the validity period of the certificate used by the application was limited to only seven days, which means that the user would have to jailbreak every week.

Fortunately, the team has released an updated version of Pangu 1.1 using an embedded certificate valid through April 2017. How to install Pangu jailbreak on iPhone or iPad with iOS 9.3.3 will be discussed below.

2 ... Disable Lock Screen Passcode & Touch ID on iPhone or iPad,

and also, the function “ Find iPhone«;

3 ... Connect your iOS device (with or without jailbreak) to your computer using the Lightning cable.

4 ... If your device is already jailbroken, activate wiggle (uninstall apps) mode and uninstall old Pangu or PP apps from the home screen.

Note. After completing this procedure, the Cydia application and all tweaks will be saved on the device. If your gadget is NOT jailbroken, step 4 can be skipped.

5 ... Open the app .

6 ... Open the folder " Downloads"And drag the downloaded IPA file to the Cydia Impactor window.

7 ... At this point, you will need to enter your Apple ID. After entering the data, click on the OK button.

8 ... Enter your password and click on OK.

9 ... Cydia Impactor will start the download process.

Once completed, the Pangu app will appear on the home screen of the iOS device. Next, open “ Settings» -> « The main» -> « Device management».

10 ... In chapter Developer Software click on Apple ID.

11 ... Click on the " Trust"Located next to the Apple ID. In the window that appears, once again click on the button " Trust».

12 ... Go back to your home screen and launch the Pangu app.

13 ... The screen will ask you to send notifications. Click on the button OK.

14 ... Check the box for the option “ Use an embedded certificate valid until April 2017»(Use embedded certificate effective until April 2017), and then click on the button Start.

15 ... When prompted (see screenshot below) click on the button Off to lock the device.

After a few seconds, the following notification will appear on the lock screen:

16 ... Wait for the device to reboot. After that, you will be able to access Cydia and all jailbreak tweaks.

17 ... In order to check the validity period of the certificate, go to the application " Settings» -> « The main» -> « Device management».

That's all. Now you can use the gadget without having to jailbreak every seven days.

You are experiencing some problems, you can install an alternative jailbreak G0blin for iOS 10.3.x. Developer and hacker Sticktron recently released an IPA file that makes it very easy to jailbreak your device.

Before proceeding to the instructions, you should know the following information.

Jailbreak G0blin supports the following iOS 10 versions:
- iOS 10.3.1, iOS 10.3.2, iOS 10.3.3
Jailbreak supports the following 64-bit devices:
- iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone SE, iPhone 5s
- iPad Air 2, iPad Air, iPad 5th generation, iPad mini 4, iPad mini 3, iPad mini 2
- iPod touch 6th generation
It does NOT support iPhone 7 and iPhone 7 Plus as they are incompatible with Luca Todesco's KPP bypass technique.
It is a semi-tethered jailbreak just like LiberiOS.
Before installing the jailbreak, back up your device via iTunes.
Charge the device so that there is enough battery power for the installation process.

A warning:

Step 1: Download the jailbreakG0 blin andCydia Impactor

The latest available version of the G0blin IPA file can be downloaded from official site and Cydia Impactor from here... Cydia Impactor is available for macOS, Windows, Linux (32 and 64 bit).

Not download jailbreakG0blinwith others sites, they may contain viruses.

Step 2:DownloadIPA-fileG0 blin per device

Connect your iPhone, iPad, or iPod touch to your computer using the Lightning cable.

Launch Cydia Impactor. The program should detect your device. Drag the previously downloaded G0blin jailbreak IPA file into the program window. Enter your Apple ID and password and wait for the download process to complete.

If the error "provision.cpp: 168" occurs in the process, read our article on how to fix it.

Step 3: start trusting your profile

When the file uploads successfully, open Settings and go to General> Profiles & Device Management.

Click on the profile with the G0blin app and select Trust.

Step 4: Run process jailbreak

Open the G0blin app from the home screen and press the button Jailbroke Yo to start the installation.

Step 5:Wait for completion

After a while, a screen should appear with a message stating that the jailbreak has been successfully installed.

Congratulations, you did it!

Video instruction

How does semi-tethered jailbreak work?

Every time your device reboots, the jailbreak stops working. You will no longer be able to use the installed tweaks. To re-jailbreak, simply open the G0blin app and repeat the above process.

When the term expiresG0 blin and how to update it?

If you installed the G0blin jailbreak with a free Apple ID, it will expire after 7 days. You will have to re-upload the file through Cydia Impactor every week. The process will be the same. You only need the G0blin app to re-install the jailbreak after rebooting the device, and the expiration will not affect it in any way.

Unlike Meridian jailbreak, Goblin supports Cydia and Cydia Substrate, so you can easily install tweaks. You can find a list of compatible tweaks.

Don't miss the Apple news - subscribe to our Telegram channel, as well as to YouTube channel.

Jailbreak(from English Jailbreak - "Jailbreak") iPod Touch / iPhone / iPad - officially unsupported Apple operation that allows you to open access to the file system in the device by analogy with Microsoft ActiveSync. This, in turn, makes it possible to expand the functionality of the device, for example, change the theme of tweaks, design, and most importantly install applications and games from other sources (not only from the App Store). Hacking tools are available to protect the baseband (GSM chip) with a special decoupling from AT&T, Sprint, Verizon.

After installation, the program has full access only to some part of the memory allocated specifically for the application (in addition, no applications are able to delete, modify or add files that do not belong to it). The exceptions are contacts, videos, photos and music; the application, after the user's consent, has limited access to them.

Tethered jailbreak

It needs to be done again after the next reboot of the device, the application does not need to be reinstalled.

Untethered (untethered) jailbreak

Does not disappear after rebooting the device, unlike the tethered jailbreak described above.

Semi-tethered jailbreak

Allows you to reboot the device without losing the ability to use it, however, after a new boot of the device, the jailbreak functions are lost.

Installing Jailbreak on iOS6

While the hackers from Evad3rs do not name the release date of the updated hacking tool, the existing vulnerabilities will most likely be applied only to iOS 7.

In this regard, the owners of all the latest gadgets with iOS 6.1.3 installed, and this: iPhone 4S, iPhone 5, iPad 3, iPad 4, iPad 2, iPod Touch 5G and iPad mini, have to wait for the release of the next untethered jailbreak.

Owners of older devices: iPhone 3GS, iPhone 4, and iPod Touch are much more fortunate. You can jailbreak them on iOS 6.1.3, but this jailbreak will be tied.

Tethered jailbreak is an iOS device jailbreak that functions until a reboot. Devices with a tethered jailbreak can function in the same way as the one jailbroken with evasi0n, but after rebooting it can only be started thanks to the computer and the Redsn0w application (otherwise it will not start). These are all differences.

With Redsn0w

Step 1: Download the official firmware version iOS6 and install on iPhone 3GS / 4, iPod Touch 4.

Step 2: Download for your Windows or Mac operating system from the iPhone Dev-Team site. Unzip the downloaded file into a separate folder, then run Redsn0w.

Step 3: In the main menu, click on the Extras (Select IPSW) item, specify the path to the downloaded iOS firmware file in step 1.

Step 4: Select "Back" and click "Jailbreak". Make sure the Install SSH checkbox is checked, and the iPad, iPhone or iPod touch is turned off and connected to your computer, then click Next.

Step 5: Click on the jailbreak button, then follow the instructions on the display. The Redsn0w program may require you to enter your device into a special DFU mode, for this you need:

Turn off the device;
Turn off iTunes;
Hold the started power button for 3 seconds, and after 3 seconds, while continuing to hold down the power button, click on the "Home" button;
And after 10 seconds, release the lock button while continuing to hold the Home button.

Redsn0w will jailbreak iOS 6 very quickly. And after auto-restarting, you will get an iPhone, iPad or iPod touch on iOS 6 with the jailbreak installed.

Loading in bound mode

Now, when you reboot your iOS device, you will need to connect it to your PC and put it into a new jailbreak mode using the Redsn0w 0.9.13dev4 function. You need to open the "Extras" category and click on the "Just boot" button.

How to install Cydia

This version of Redsn0w does not install Cydia when jailbreaking, the entire Cydia installation will have to be done manually.

All the necessary commands to install Cydia through a secure SSH shell were produced in the Terminal application for Mac OS X. Owners of Windows computers will be able to use similar commands in WinSCP. Further instructions.

Step 1: You need to select “Wi-Fi” in the “Settings” menu and click on the arrow next to the network name. Copy your IP address like 192.168.2.64. (Check if the gadget is connected to the computer wirelessly. It is recommended to disable the brandmauser and antivirus).

2 Step: In a special application or in the terminal, specify the code: ssh [email protected]"IP-address of the device", for SHH connection of the device (for example: iPhone).

Step 3: Enter the default password. (You can also use other programs to connect to the device, Putty on Windows and Coda on Mac).

4 Step: Enter the command (via SSH):

wget -q -O /tmp/cyinstall.sh http://downloads.kr1sis.net/cyinstall.sh && chmod 755 /tmp/cyinstall.sh && /tmp/cyinstall.sh

Step 5: The device will respawn, after which the Cydia icon will appear on the screen. Start the store, it will prepare the file system for work.

Now you can install tweaks and applications from Cydia.

Note: Redsn0w 0.9.13dev4 is not capable of jailbreak on iPad 2, 3, iPhone 4S based on A5X and A5 chips.

How to jailbreak iPhone 5, 4S, iPad and iPod touch

Step 1: Download the latest iTunes and Evasi0n.
Step 2: Update your iPhone, iPod touch or iPad to the new iOS 6.1.2 through iTunes.
Step 3: Connect your device to your computer, open iTunes or iCloud and back up your information. You also need to disable the password on the lock screen, go to Settings -> then General -> Password protection -> and Disable password.
Step 4: Evasi0n will display your gadget model. Click on the "Jailbreak" button in the program. The application will now inject, install the Cudia store and reboot the device. Do not interrupt the installation procedure and do not disconnect the gadget from the computer at this moment!
Step 5: After the message “To continue, please unlock your device and tap the new‘ Jailbreak ’icon” appears, unlock the gadget and find the “Jailbreak” icon on the desktop, click on it. The screen of the gadget will turn black for a moment, and then a springboard will appear.
Step 6: Next, the jailbreak continues: you will notice in the program window information about the jailbreak of your device. After the message Done! close the application. Your iPhone will restart. Note that the launch process will take a long time.
Step 7: And now, after the phone boots up, the Evasi0n logo will appear on the screen. Your iPad or iPhone will restart a second time.

That's all! You have jailbroken your iOS device.

Question answer

What is jailbreak? It's unhealthy? Can i jailbreak?

No, this is not harmful, and in some cases, vice versa. When jailbreaking the device, you can install software packages unsigned by Apple that can change the functionality of the device.

Will I be able to buy music and apps from the App Store?

Will my early purchases be lost after the Jail?

No, nothing will happen to your Apple ID, you will continue to use the device as before.

There are opinions that the device starts to slow down from jailbreak. This is true?

No, the device will not slow down from it.

What is a tweak?

A tweak is a small program that adds functionality and usability to your device. For example, quick settings in the dedicated Notification Center.

Installing Phoenix jailbreak is very easy. The application must be downloaded to the device using the Cydia Impactor program, then open it and start the process. Like the Yalu app, the Phoenix jailbreak is semi-tethered, which means that every time you reboot your device, you need to restart the Phoenix jailbreak.

In this article, I will show you how to jailbreak iOS 9.3.5 on 32-bit devices using Phoenix.

Before you start, be sure to read the following important information:

This jailbreak is only supported by 32-bit devices, which include:
- iPhone 5
- iPhone 5c
- iPhone 4s
- iPod touch 5
- iPad 2
- iPad 3
- iPad 4
- iPad mini 1
64-bit devices do not support Phoenix jailbreak.
Jailbreak semi-tied. When you reboot your device, the jailbreak will turn off and you will have to reinstall it via the app.
Jailbreak may not be installed the first time. If you get errors during installation, start over until the jailbreak is installed.

How to install JailbreakPhoenix foriOS9.3.5 on 32-bit devices

1: Download the Phoenix IPA file and program to your computer.

2: Connect your iPhone, iPad or iPod touch to your computer, then open Cydia Impactor.

3: Drag the Phoenix IPA file into Cydia Impactor as shown in the screenshot.

4: You will be asked to enter your Apple ID and password. This information will only be shared with Apple in order to register the IPA file. Enter your Apple ID and password so Cydia Impactor can begin the app installation process.

5: When the application is installed, an icon named "Phoenix" will appear on the main screen. Before opening it, go to Settings> General> Profiles(can also be called " Device management" or " Profiles and device management»).

6: Then profile with Apple ID and click " trust».

7: Now go back to your home screen and launch the Phoenix app.

8: To start installing the jailbreak, click the button Prepare for Jailbreak.

After that, the jailbreak installation process will begin. Do not touch your device until the installation process is complete. When this happens, the device will automatically reboot and the Cydia icon will appear on the home screen. If an error occurs, restart the installation until it works. As stated on the site, errors can occur with the exploit, so you may need to make several attempts.

Now you have jailbreak installed on your iOS 9.3.5 device, and you can install various tweaks by opening the Cydia app. When you open Cydia for the first time, it will take a little time for the app to complete the installation. When the installation is over, you can start using it, but remember that you can only download those tweaks that are compatible with your device.

How does semi-tethered jailbreak work?

Phoenix is a semi-tethered jailbreak. This means that when you reboot your device, it will crash. You won't be able to use installed tweaks, and Cydia will crash on startup. To re-install the jailbreak, simply open the Phoenix app and run the installation. The jailbreak will be installed on the device again.

When the application expiresPhoenix and how to reinstall it?

If you install the Phoenix app with your free Apple ID, it will expire in 7 days. You will have to reinstall it via Cydia Impactor to renew it for another 7 days. This is done in the same steps as above. Please note that the Phoenix app is only needed to install the jailbreak, so even when it expires, the jailbreak will continue to work. But you have to download the app if you want to re-jailbreak your device.

If you install Phoenix with a developer's Apple ID, the app will only expire after one year.