DIY phone stand. Stand for a smartphone on a car torpedo with your own hands or how to make a car holder for a phone in a car Homemade phone mount in a car

Naturally, an ordinary do-it-yourself phone stand is made easily and from scrap materials. This could be a plastic card, a cassette holder, or even a toilet paper sleeve. But the car holder must be attached somewhere, otherwise the gadget will fly all over the cabin. Here are 5 independent inventions that solve the problem of placing smartphones and tablets in a car.

1. Velcro

The cheapest way. Buy double-sided tape from your local supply store or the sewing department store for duct tape. Glue one side to the gadget and the other to the dashboard. Before gluing, the dashboard and the back cover of the gadget must be wiped so that no dust and dirt remains.

Dignity

Budgetary.

disadvantages

Such a holder will only live up to the first pit or a serious shake-up. And the gadget attached to it, most likely, too.

2. Binder clip (stationery clip)

Back to the stationery holder again! We buy a clip for papers, it is also a binder clip. We take out the staples, bend them as in the picture, wrap them with a thick thread, put them in place and fix them with an elastic band. Then we attach the resulting device to the duct and you're done.

Dignity

Inexpensive, tight fit and easy to perform.

disadvantages

The phone cannot be easily removed from such a clip. It is not a fact that the thread winding will really soften the impact on the phone. You cannot change the angle of inclination. The air duct grill could be broken.

3. Wire

For those willing to sacrifice dashboard integrity. This holder is only for tablets in a folded case. Take a sturdy stainless wire. Drill two holes with the appropriate diameter in the dashboard. Bend the wire and insert into these holes. Hang the tablet by the case.

Dignity

All you need is a wire and a drill.

disadvantages

There will be holes on the dashboard. The tablet will not be securely fixed and will block access to the radio tape recorder.

4. Screws or nails

The most brutal way. For the harshest men. Four screws / nails in the dashboard - and the phone will definitely not go anywhere.

Dignity

Nobody wants to argue with the owner of such a holder on the road.

disadvantages

Broken dashboard and scratched phone.

5. Metal

This method is for craftsmen and lovers of metalworking. Cut out the necessary parts for the future holder from a suitable metal. Fold to fit your gadget. Gather the parts together and connect firmly. Sand and paint. Add rubberized inserts and an in-car mount. Ready!

Dignity

disadvantages

It is impossible to do this without special skills and tools.

Homemade products are of three types: flimsy, spoiling the interior or requiring real skill. Why waste your time when you can buy a phone holder for a torpedo or glass, for example, an OLMIO car holder for smartphones that will fit into the interior of the car, will not spoil anything and will allow you to use your phone conveniently?

In our progressive times, it is difficult to meet a person who does not have a mobile phone. Even by sending a child to first grade, parents provide him with the necessary means of communication. We use modern mobile devices not only for communication, but also for gaming applications, typing, reading, as well as watching videos and much more. Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way. The stores offer a variety of expensive holders, but in our article you will find out what you can make

Stationery binders

Surely those who study or work in the office will have several stationery clips called binders on their desktop. Next, let's take a look at how to make a phone stand out of these gadgets. To create a sturdy holder, you can use 1, 2, 3 or even more binders. Some craftsmen assemble voluminous designs from many different sizes of clips. But such stands look bulky and are inconvenient for temporary use. It is enough to fasten two binders together and do not forget to bend one metal end of the holder towards the phone located on it. Even one piece with a folded eyelet will be enough to support your mobile device.

From the same binders, you can build another structure by placing the clamps opposite each other so that the ears look to the sides. The phone is inserted into these ends, as in the grooves. To keep the clips stable, clamp a small cardboard on both sides.

Using pencils

If there are no binders at hand, the question may arise: how to make a phone stand out of pencils. Before building this structure, prepare 4 rubber bands and 6 pencils. In fact, you need to assemble a three-dimensional geometric figure - a tetrahedron. The principle is that you need to fasten two pencils with an elastic band, and push the third between the turns. It is advised to use pencils with an eraser at the end to prevent slipping on the table and a stronger grip on the phone.

Bottle models

In the household, we use a variety of cleaning and detergents. Most of them are contained in plastic containers. It can be used as a mobile device holder. And how to make a phone stand out of a bottle, we will consider further.

The type of fixture will depend on the shape of the container. This can be a container for shampoo, shower gel, cleaning agent and other. Take a bottle twice as long as your phone. Cut off the neck and part of the container from one side to about the middle. All sizes are relative - measure at your discretion. Cut a hole in the opposite area of ​​the bottle that matches the charger's specifications. You should end up with a detail that resembles a purse or pocket with a handle. Place the phone in the cradle and connect the adapter to the mains through the hole. Your mobile communication device will not roll on the floor and there will be no risk of crushing it. You've learned another way - how to make a phone stand. If desired, this holder can be painted, pasted over with beautiful paper or fabric.

Paper clips

The simplest and most affordable stand option is a regular metal paper clip. It must be unbent in a straight line and folded as shown in the diagram. The resulting product is quite sturdy and stable. This design perfectly holds the mobile phone without interfering with video viewing at all.

Cardboard and plastic cards

How to make a cardboard phone stand? You will need a cardboard sheet from which you will need to cut a 10 x 20 cm strip. Then you need to fold it in half along the short cuts. Next, draw a shape as shown in the photo below. The fold line must remain intact. Expanding the detail reveals that you have a comfortable and stable phone stand.

If you have an unnecessary card lying around (any discount card), it will also make an excellent phone stand. Making such a device at home is very simple. Step 1 cm from the edge of the card and bend the piece along the short side. Fold the rest of the card in half in the opposite direction. You will have a zigzag shape. Place the phone on the formed protrusion. The stand is ready.

Unusual coasters from simple things

Savvy people began to use ordinary glasses as a phone holder. They only need to be turned over with the bows upwards, which, in turn, must be crossed. The mobile device is positioned between the bezel and the temples that support the phone.

How to make a phone stand from a construction set? In this case, it all depends on your creativity and imagination. To create such a model, you need to use a platform and several bricks of different shapes. A stand made of parts can hold the phone both vertically and horizontally. The tilt of the screen can be adjusted by adding or removing additional bricks.

Another interesting detail that will help keep the phone upright is the old cassette holder. It is necessary to open it and flip the lid back, thereby turning the box out. In the hole that once served as a pocket for an audio cassette, you can put your communication device. The convenience of the stand is that it is quite durable and transparent and does not interfere with the use of the phone. Plus, it can be easily washed.

As you can see, from the simplest items that can be found in every home, you can make such a useful thing as a phone stand.

Proposed for construction, a phone stand for a car will be extremely useful for drivers who often use a phone. She will solve problems with finding a phone during a trip. Thanks to the simple and reliable design, the work does not take long.

Step 1. Tools.

To create a rack you will need:
1. Aluminum tube with a diameter of 47 mm "f. 4";
2. Connecting angle tubes in 45 ° and 90 ° (aluminum or copper). They are cheap and sold in any hardware store.

3. Solid wooden sticks (you can take ice cream sticks);
4. Epoxy glue or any other glue with similar qualities;
5. Phone case or case;
6. Cable ties (they will be needed to secure the cover);
7. Hacksaw;
8. Ruler;
9. Knife.

Step 2. Assembling the frame.
Before starting work, you should decide on the location of the telephone rack. It should not interfere with the use of the audio system, recharging and other daily activities in the car. Only then can you start measuring.

The aluminum tube needs to be cut into 3 pieces. The shortest part is attached to the 45 ° elbow tube. The horizontal part (about 5 cm) connects 90 ° and 45 ° angled tubes "f.2.1 - 2.2". A vertical pipe (approximately 10-13 cm) will support the stand itself. All pipe connections must be lubricated with glue so that nothing falls off during movement.

Step 3. Attaching the cover.
On the reverse side of the cover we make 3 pairs of cuts (the depth of the cut should correspond to the ends of the ties). The incisions are parallel to the tube, which will subsequently be attached to the sheath. We pass the ties into the holes and tighten a little (the main thing is not to overdo it). We tighten the long tube of the frame with ties as shown in the photo. Cut off the ends if they are too long.

Next, you need to cut the wooden sticks in half, insert between the cover and the aluminum tube and grease with glue.

In my travels, I use my smartphone as a navigator. I have had a few factory-made car phone holders, and there was always something wrong with them. Over time, they become loose, or it becomes problematic to install a phone in them.

Show 5 more images

The last phone holder I bought in a car was a sticky silicone mat with slots in which you could place your smartphone on its side. But my friend could not fit her smartphone into it in a leather case-book, she had to remove the case. I decided to implement an old idea. Life hackers must act, let the rest whine!

You will need:

• a piece of wood, about 300x100x8 mm (I had a piece of black fiberboard)
• mini loop
• spring
• a few screws, glue
• engraver with attachments or manual router
• mounting platform (I used the proverbial silicone mat)

Memo: This holder attaches to the rough surface of the dashboard, and if you want to place your phone on the windshield, this is definitely not your option.

I will show you the simplest way to assemble a phone stand in a car. In the end, I used a sealant after I assembled the holder, but this is because I remembered about it too late.

Files

Step 1: cut out the details

From a piece of fiberboard, I cut three parts of the following sizes:

• Top cover 150x90x8 mm
• Bottom cover 130x90x8mm
• Roller 9x90x8 mm

The roller must be glued to the top cover at a distance of 5 mm from the edge, this indent will allow you to use the holder with one hand. When the glue is dry, secure the roller with two additional small countersunk screws. This part will protect the top edge of your smartphone.

Step 2: making the slots

Using a linear milling compass or a milling bit (or a hand router), make a slot in the bottom cover that is slightly wider than the smartphone in the case. The smartphone should not sit tightly in the slot, I will return to this point later. The slot will protect the bottom edge of your smartphone.

If the piece of wood from which you make your smartphone holder in the car is too thin, you can glue two rollers on the bottom cover to make a slot for the smartphone.

Make a cutout for the spring on the top cover, on the side with the roller. The cutout should not be overlapped by the hinge and should be slightly longer than the spring. The picture shows that this neckline turned out to be very sloppy. My engraver seems to be living his own life, moving wherever he pleases.

When you're done with the slit and cut, sandpaper to a satisfactory finish and dust off.

Step 3: apply the sealant

Apply masking tape around the areas where you will be applying the sealant. After applying the sealant, soak your finger in soapy water and smooth the surface of the sealant with it. Pay special attention to the edges so that there are no pieces of sealant sticking out.

When you are finished applying the sealant, carefully peel off the tape so that the edges of the sealant are even and let the parts dry overnight.

Step 4: attach the metal parts and assemble the structure

Attach the loop very carefully. If it is tilted slightly, the covers will not be parallel to each other when opened. Depending on the material you use for the lids, the hinge and spring can be screwed directly onto the wood. I didn't have screws of the right size, so I used bolts and nuts. I made indentations for the nuts, so that they hardly stand out above the surface of the caps.

First we fix the mini loop on one of the covers, then we fix the spring on both covers. After that, we attach the loop to the second cover. This makes it much easier to secure the loop correctly.

Step 5: decorate the holder

I had an unnecessary piece of leather, with the help of shock letter stamps (first wetting the leather) I made an inscription. The options to highlight the uniqueness of your holder are actually endless.

My Skoda Yeti has a wonderful flat area on the dashboard. Our holder should be mounted on a practically flat surface. If the surface of your dashboard is not flat, you will have to secure the holder to something else or somehow level the surface. I already mentioned that I had a sticky silicone mat. With scissors, I cut off all the protrusions that hold the smartphone in an upright position from it, until I just got a flat silicone mat. These can be purchased at eBey or most hardware stores. I attached it to the smartphone holder with a few staples.

In general, you can simply drill a hole in the dashboard and secure the holder with a screw.
Well, you've made a universal smartphone holder that fits almost all smartphone models on the market. It can be used for smartphones without a case, with a case or with a folded case. It is easy to use with one hand, and when the holder is not needed, it hardly rises above the dashboard.

If the evolution of smartphone displays goes the way of enlargement, you can make the holder "jaws", so this holder can also be used with tablets. Enjoy.

Big and ardent greetings to everyone! It has been a long time since I wrote to the “DIY” section. Regular readers have probably forgotten that such a thing exists. But come on, today I will be corrected. And I will share with you very cool ideas on how to make a do-it-yourself phone stand.

Recently I have been reading a lot, studying information, watching videos. But holding the phone in your hands is not very comfortable. And it so happens that, for example, I cook food, cut food, and I have to prop up the phone with whatever comes to hand. And suddenly I got an idea why not buy a stand in the store, which will make my life much easier. Having rummaged on the Internet, finding the answer to the question of what and for what it is worth, I came across a photo that showed the very thing, but done in seconds and with my own hands. Then a thought flashed in my head, to put together several inspiring ideas. And in the end, I hope, an interesting post was born. So, let's begin!

I propose to start with the most eaten version of a paper phone stand. You can build it at any time and in any place, the main thing is to have a sheet of paper at hand of approximately A4 size. It seems to me that students and schoolchildren will like this idea. The main principle here is to take a sheet of paper, preferably thick, fold it lengthwise to get at least 3 layers, but of course it all depends on the width. Then again you need to fold the paper, making folds across so that 3 wide edges of the same width and one small one are formed. Look at the photo, it clearly shows what should happen in the end. And the last step is to make two small folds.

I can't even imagine who can keep such a rarity as a tape cassette box for a tape recorder. But it turns out that such an object, seemingly completely useless, can be used. In a couple of seconds, by turning it over in a certain way (see photo), you get a very cool smartphone stand. Moreover, if you paint it with paint from a bottle, then few people will guess what it is made of.

If you have several builders lying around at home, then it is quite possible to build a structure in order to hold your phone in a horizontal position. And this is done in a matter of minutes. And it is also easy to disassemble it, putting it back in place was done.

A plastic card as a phone stand? The idea is bold, but quite real. You just need a couple of cards and some sturdy scissors. Crop the details as shown in the photo and enjoy watching videos, photos and reading e-books.

The next way to make your life easier is to stock up on six pencils and four rubber bands. Basically, you need to make a three-dimensional shape, as shown in the figure. Start with a simple triangle, then add one edge at a time, holding it all together with rubber bands. Get the original delivery for the phone.

Having a couple of wooden cuts in the house, it is really possible to make an interesting and original, and most importantly, durable device for smartphones. You can glue the parts with hot or universal polymer glue. Indeed, this design will serve you for a very long time.

And here are some more life hacks for your phone to keep them going while charging. Such devices are needed mainly when there is simply no place to put the gadget, if there is no table or cabinet next to it. Such holders are made from a plastic bottle, as in the first case, or from thick cardboard, as in the second.

How many ideas have I seen with a toilet paper sleeve, but this one! You will need the sleeve itself and 4 paper buttons (to be honest, I don't know what they are called correctly). Attach them as legs, cut a hole at the top to fit your phone so you can slide your phone in, and enjoy the result. Of course, it is better to decorate such a stand with something or just paint.

As you already understood, making a paper phone stand is the easiest option. So, you need a piece of very thick and cardboard. If there is none, then make it from several layers, gluing to each other. Cut holes in the parts as shown. Moreover, such a holder is suitable not only for smartphones, but also for tablets.

Well, the very last of the ways I proposed to make a do-it-yourself phone stand is to use a clerical clip. I'm sure everyone can find it, and if not, then it is not very expensive in stores. Take a couple of such devices, bend one rounded piece of a paper clip inward. It will act as a barrier for the phone to prevent it from rolling. Place one binder in another. Place your smartphone so that it rests on one ear, and the other is bent on the side of the screen. Here's a simple holder!

That's all for today, I hope you liked the ideas and were inspired to make one of the presented gizmos! Until next time!