Clock WatchDog Timeout Windows 10 What to do. How to fix clock_watchdog_timeout type "Blue screen" (0x00000101)

Before I explain what this error means and how to fix it, I will give you a small reference information. First, you encountered one of the many infamous errors "Blue Death Screen".

You may have encountered them before. Depending on which version of Windows you use, you either see something similar to it:

Blue screen past

Watchtower Time Out in Windows 8

What causes my problem?

Simply put, this is your processor. Or, as you often hear, it's yours.

Graphics cards - or graphic processors - determine the visual elements of what you see on the screen, and memory - or - determines how much you can do at the same time. Hard drives serve to store your files and folders, and your processor is raw power behind everything that is being done on your computer.

The clock_watchdog_timeout error means that your processor has problems with its cores and streams. Themes are tasks performed by nuclei, and some kernels can take a lot of streams at the same time. The problem here is that the thread expects the correct response from another stream - or the kernel is waiting for an answer from another nucleus - and these answers do not occur. Therefore, you get this bsod error.

Although this is a problem with the processor, it can be caused by two things: driver error, which is very likely if you use Windows 8, or the OS itself does not play well with the processor. The first question: how long did you have this computer? Until now, did he work fine?

How to fix it?

If so, simply use to return to the point in which the system worked. Be careful using any new devices that can cause a problem.

If you can boot in when starting your computer, run to update all your drivers to their latest version. This is a good chance that it will eliminate the problem.

You should also use the Windows Update Center, and if you do not yet use the latest device driver, install it as well.

Drivers are what is used to ensure that your devices, such as the keyboard interact with your computer, and, although some incorrectly configured drivers can lead to poor performance, bad drivers mainly lead to such BSOD as clock_watchdog_timeout.

In Windows 10, there is a mass of shortcomings that are often poured into a blue screen known yet on Windows XP. In the "eight" and as a result, the "dozen" representatives of Microsoft replaced this critical error, on the screen with the message: "DPC WatchDog Violation". It appears at any stage of the computer and at any time. Therefore, it was time to consider the DPC WatchDog Violation error in Windows 10 in more detail, familiarize yourself with the reasons for the appearance and methods of getting rid of it.

Causes of Stop Error

Most often, the problem is accompanied by installing the update for Windows 10, it is started after performing an update or installing software affecting system files or closely into it integrable software (drivers, services). Due to the error, the developers removed not one update and repaired several packets of updates.

Consequence, in case of unsuccessful completion of the update, the system rollback to the previous state and the obsessive offer to repeat the update "dozens", the attempt of which, as a rule, ends similarly. And the process is loaning. For Microsoft, this is not new.

Drivers

Most often, the driver of any device is the problem of the so-called Stop error. After the release of the "dozens", the developers of computer components have a mass of almost free work. It was necessary to finalize or write a new drivers of a huge number of hardware components and peripheral devices, so that their owners were able to successfully use Windows 10.

As you know, you will not always wilgest and the dog tail is not always wilted. So many manufacturers of computer gland with insufficient responsibility reacted to develop drivers for a new operating system. And when taking into account that at that time it was raw and flawed, and part of the equipment is pretty outdated, we obtain a lot of conflicts, flaws and failures in the functioning of the driver and equipment.

In other common causes of calling a problem DPC_WATCHDOG_VIOLATION are:

damage to the registry and other critical system files;
the presence of broken sectors on the hard disk;
damage to RAM;
functioning of malicious code;
overheating of the processor, elements of the video card or the northern bridge of the motherboard;
conflict between running programs / services (for example, when using two emulators or antiviruses at the same time);
excessive acceleration of the processor / video card.

The list of reasons is far from completed, but basic we found out. It's time to proceed to their decision.

DPC_WATCHDOG_VIOLATION problem troubleshooting methods

Well (although what is good here) when the blue screen appears after or as a result of the upgrade of Windows 10. In this case, nothing is required by the user. The computer will restart in automatic mode and, if the update program managed to make any changes to the system, performed their rollback. After the conflict must be exhausted.

After this, it is necessary to post up the update for several days (and if you wish to report Microsoft Support) in the hope that the inadequate case, and wait for patches.

When the blue screen appears due to the incompatibility of the Windows driver, the presence of serious shortcomings in its code or the appearance of conflicts with other software, then without the user intervention is not to do.

To remove such a driver, you need to call the "Programs and Components" applet through the search.

Check the culprit from the list of possible (it is worth remembering which driver is updated shortly before the error appears or sort the list of applications by the date of installation).

If a possible cause of the problem is the driver for a video adapter, use the DISPLAY DRIVER Uninstaller utility.

If after restarting the computer caused by the appearance of a blue screen, it does not turn on, and cyclically restarts or gives the same error before the lock screen appears, the automatic resumption of Windows 10 will help here. A tool from a recovery disk or bootable media with a "dozens" distribution disk .

Click on the "Restore System" button.

After rebooting the computer, select the account, if you have a password, we enter it and click "Next".

Select the latest recovery points made before the problem occurrence, and see which programs they affect by pressing the corresponding button.

Select the appropriate state of Windows 10 and click "Next".

In the last window, click "Finish".

After rebooting the computer, everything should be in order.

Other ways to eliminate the error

It is still possible to accept with the appearance of the window ": (DPC Watchdog Violation" during the installation of software, and when the work in the office program or browser is interrupted due to the STOP error, it is no longer funny.

Update OS

Call the update center in a convenient way, click "Checking an update" and set all the received updates, if one of them has not become a factor in the interruption of the PC operation.

We test the operational memory

Often errors in the functioning of the computer appear due to problems in the RAM (transistors and, especially, the capacitors are not eternal). Test RAM using a special program, for example, Memtest86 +.

Checking the presence of defects on HDD plates

Batched sectors often become the culprits of Stop error.

Call the dialog of the system volume properties, on the "Service" tab, click "Check".

Checking the temperature of iron

When overclocking a video card or processor, it is necessary to monitor their temperature during loads, especially when using a standard cooling system in the form of a radiator and a cooler, as well as in summer heat.

View temperature value, in order to make conclusions about the overheating of the equipment, will help, for example, Hwmonitor.

We hope the article helped get rid of the problem.

11/14/2017 Windows

One of the most difficult to determine the reasons and correcting errors in Windows 10 - Blue Screen "On your PC there is a problem and it must be restarted" and the CLOCK_WATCHDOG_TIMEOUT error code, which can appear both in arbitrary moments and when performing certain actions (launch of a specific program , Connecting device, etc.). By itself, the error says that the expected interruption system was not received from one of the processor cores for the expected time, which, as a rule, little says about what to do next.

In this manual - about the most common causes of error and ways to correct the blue screen clock_watchdog_timeout in Windows 10, if possible (in some cases, the problem may be hardware).

Blue Death Screen (BSOD) Clock_WatchDog_Timeout and AMD Ryzen Processors

I decided to make information about the error in relation to the owners of computers on Ryzen in a separate section, since for them, in addition to the reasons described below, there are also their specific.

So, if you have a CPU Ryzen on board, and you encountered the clock_watchdog_timeout error in Windows 10, I recommend to take into account the following points.

Do not install the early buildings of Windows 10 (version 1511, 1607), since they are possible conflicts when operating on the specified processors, which leads to errors. Further were eliminated.
Update the BIOS of your motherboard from the official site of its manufacturer.

On the second item: on a number of forums report that, on the contrary, the error manifests itself after updating the BIOS, in this case the rollback is triggered to the previous version.

BIOS problems (UEFI) and acceleration

If in recent times you changed the BIOS parameters or performed the processor acceleration, it can cause the clock_watchdog_timeout error. Try the following steps:

Add to notes to view later?

Disable processor acceleration (if executed).
Reset BIOS on default settings, you can - Optimized Settings (Load Optimized Defaults), More - How to Reset BIOS Settings.
If the problem appeared after assembling the computer or replacing the motherboard, check if the manufacturer's official website is updated for it: perhaps the problem has been solved in the update.

Problems with peripheral equipment and drivers

The following reason is the incorrect operation of equipment or drivers. If you recently connected new equipment or just reinstalled (updated the version) Windows 10, pay attention to the following methods:

Install the original device drivers from the official website of the manufacturer of your laptop or motherboard (if it is a PC), especially the chipset drivers, USB, power management, network adapters. Do not use driver-packs (programs for automatic drivers), also do not perceive a serious "driver does not need update" in the device manager - this message does not mean that there are really no new drivers (they are not only in the Windows update center). For a laptop, an auxiliary system software should also be installed, also from the official website (precisely systemic, various application programs that may also be present there).
In the event that there are devices with errors in the Windows device manager, try to disable them (the right click of the mouse - disable), if these are new devices, then you can disable them and physically) and restart the computer (it is a restart, and not to complete the work followed by inclusion , In Windows 10 it can be important), and then watch - whether the problem appears again.

Another point regarding the equipment is in some cases (talking about PCs, not laptops) The problem may appear if there are two video cards on the computer (integrated chip and discrete video card). The BIOS is usually present to the PC to disable the integrated video (as a rule, in the Integrated Peripherals section), try moving off.

Software and malicious programs

Among other things, BSOD clock_watchdog_timeout can be caused by recently installed programs, especially those of them that work with Windows 10 at a low level or add their system services:

Antiviruses.
Programs adding virtual devices (can be viewed in device manager), for example, Daemon Tools.
Utilities for working with BIOS parameters from a system, for example, ASUS AI Suite, overclocking programs.
In some cases, the software for working with virtual machines, such as VMware or VirtualBox. With regard to them, sometimes the error occurs as a result of the wrong operation of the virtual network or when using specific systems in virtual machines.

Also, such software can include viruses and other malicious programs, I recommend checking the computer for their presence. See the best means of removing malicious programs.

CLOCK_WATCHDOG_TIMEOUT error as a result of hardware problems

And finally, the cause of the error under consideration can be hardware and associated problems. Some of them are just fixed, they can be attributed to them:

Overheating, dust in the system unit. You should clean the computer from dust (even in the absence of signs of overheating, it will not be superfluous), when the processor overheating, it may also be changed to the thermal paste. See how to find out the temperature of the processor.
Incorrect operation of the power supply, voltages are different from the required (can be traced in BIOS of some motherboards).
RAM errors. See how to check the prompt memory of the computer or laptop.
Problems with hard disk work, see how to check the hard disk on errors.

More serious problems of this character are motherboards or processor faults.

Additional Information

If nothing of the described has not yet helped, the following items may be helpful:

If the problem has appeared recently, and the system is not reinstalled, try using Windows 10 recovery points.
Check the integrity of Windows 10 system files.
Often the problem is caused by the work of network adapters or their drivers. Sometimes it is not possible to accurately determine that the case is in them (updating the drivers does not help, etc.), but when the computer is disconnected from the Internet, turn off the Wi-Fi adapter or removing the cable from the network card, the problem disappears. This does not necessarily indicate about the problems of the network card (system components that incorrectly working with the network can also be guilty), but can help in diagnosing a problem.
If the error manifests itself when you start some particular program, it is possible that the problem is caused by its incorrect work (perhaps specifically in this software environment and on this equipment).

I hope one way will help solve the problem and in your case an error is not caused by hardware problems. For laptops or monoblocks from the original OS from the manufacturer, you can also try to reset the factory settings.

Liked? Vote! Support project:

Before I explain what this error means and how to fix it, I will give you a small reference information. First, you encountered one of the many infamous errors "Blue Death Screen".

You may have encountered them before. Depending on which version of Windows you use, you either see something similar to it:

Blue screen past

Watchtower Time Out in Windows 8

What causes my problem?

Simply put, this is your processor. Or, as you often hear, it's yours.

How to fix it?

If so, simply use to return to the point in which the system worked. Be careful using any new devices that can cause a problem.

If you can boot in when starting your computer, run to update all your drivers to their latest version. This is a good chance that it will eliminate the problem.

You should also use the Windows Update Center, and if you do not yet use the latest device driver, install it as well.

Clock_watchdog_timeout with code 0x00000101 is one of their most ambiguous errors that the system can produce during the blue screen of death. In essence, it means that one of several processor nuclei, did not send the interrupt, although it was expected by the system. Such a failure can occur both at ridual time and when launching certain programs and when performing some actions. This article will tell you more about what kind of failure and how to cure it.

AMD Ryzen Processor Problems

The owners of this processor are not very lucky, because they have this error more often than others. The main thing that is worth knowing is that no need to install Early versions of dozens, it is worth trying to put the newest of the available. In older versions there were conflicts in OS because of which the computer often flew out with such an error, now it all fixed.

There are also two more mutually exclusive options. Some users help bios update Before the new version, which can be downloaded from the manufacturer's website. In some, on the contrary, the option is triggered with the installation of the old version. If nothing helps, you can try both of these options alternately.

Change BIOS (UEFI) or acceleration parameters (UEFI)

The emergence of failures is also possible if the user has accelerated its processor to accelerate work. If so, then it is worth reset settings up to standard. On the other hand, even if the user did not change the settings, all the same, this procedure does not hurt, so it should be done in any case.

In the case when the failure occurs when installing a new motherboard or a rebeling of a PC, you can try to update its BIOS by downloading it from the official page of the manufacturer.

Faults of periphery or drivers

Separately, it is worth noting a malfunction of peripheral devices or drivers, in which case:

First, the user will need load all Drivers, From the pages of the manufacturers of its hardware or from the page of the laptop manufacturer. It should be done even if the device manager says that nothing needs to be updated. Sometimes it makes sense to download programs for the old version of the same bit and install them.
It should be logged in device Manager And turn off all nonconnected and indefinite devices.
In the case when a regular and integrated video card is installed on the computer, you can turn off the latter, which can solve the problem.

Problems in computer hardware

If nothing of the previous sections helped, then check hardware component.

It is worth installing utilities for checking a computer for overheating. If it is, it is necessary to clean it from dust, you can also replace the thermal chaser on the processor.
Possible problems S. rAM, There are several programs for its testing.
Also does not hurt check hard diskmaybe he starts to pour.
Failure can occur due to voltage jumps Or its deviations from the standard value, you should check the power supply. Some motherboards can in Bios themselves show how voltage on what channels is coming. If this is not, then only with the help of a multimeter.

If nothing helped

In the event that none of the methods helped, it remains to check the latest options:

It is worth checking the system on viruses.
You can also try disable PC from the Internet and Wi-Fi, sometimes failures arise due to network adapters.
Should be spent full check integrity of system data.
You can produce system rollback on one of the recovery points.
In the case when the failure occurs when the specific application is started, you need Read more examine his requirements. Perhaps on the computer something is missing. A conflict of programs with something from the equipment is also possible, it is worth checking it on another device. If the utility is loaded from the Internet, you can try to download it elsewhere and re-install.