How to remove the script error in Windows? Correct the errors in Windows how to get rid of the errors on the computer.

Most computer owners, eliminate faults related to the operating system in manual mode, are unable.

For this, there are standard ways and extra. What to enjoy depends on the specific situation.

To do this, log in to the control panel and click on the "troubleshooting" option. See Ric:

As can be seen from the drawing, a lot of tools. Define an error, find it in the menu and click. Next, start the utility and performs automatic elimination of errors.

Of course, they arise much more than arises in the control panel. There's solutions for everything.

Another way to automatically correct system errors is special mini utilities called "Fix".

Another standard option how to automatically correct system errors, you can call the installation disk.

Insert it into the drive, and start performing actions as when reinstalling Windows, but when you reach Windows 7, set, press below as in the figure below the system restore. Follow the written indication further.

All described above refer to standard methods. Additional in the form of programs for automatic correction of errors have arisen. For example, "RegistryBooster" or "Reg Organizer", only I do not use them.

I prefer to other - "" and "CCleaner". The second only corrects the registry, whereas the first can eliminate automatically most system errors.

To make these operations in manual mode, you need a lot of time and knowledge, but rely only on "automation", it is also not worth it.

This is especially true to. Now I do not remember what exactly I used for this program, but after its intervention, eliminating its "developments", no longer helped nothing, I had to fully change the transaction.

So, we take off to automatic error correction carefully and at least always create a control point of recovery, and even better write the image to an external hard drive.

There is another option, find out what happens to your computer. True, he refers to the manual regime.

It seems to see what is recorded in the "WINDOVS magazine". There are all the mistakes that happened to your computer.

Sometimes they are recorded in the form of a code that is to decipher. Although it is not to relate to the automatic elimination of system errors, but sometimes the only way to find out what happened and then fix it.

So that such problems did not occur, as I wrote above try to purchase an external hard drive and make copies of images from time to time.

Only then can you be 100% confident that you will always automatically correct absolutely all system errors.

Greetings to you ladies and gentlemen.

The Windows7 study environment is not ideal, sometimes there may be different types of errors in Windows 7 both hardware and systemic nature - the computer stops responding to requests, applications do not open, and in particularly severe cases stops loading at all. And instead of the usual screensaver, windows 7 error codes are displayed. It is classification, that is, error codes will help to recognize the problem that has arisen and find the right solution path.

How can I solve the problem?

Let us list several methods.

To quickly find the error code and its value, press Ctrl + F on this page and enter the error code in the field.

Check hard disk for errors

If during operation on the computer suddenly turned off the electricity, and your battery was out of order, then the work emerged - work without a source of energy the computer simply will not be able. What happened?

Windows did not complete their work with the standard way, did not save the necessary information in the device RAM to further start the computer.

After the light appeared, you are trying to turn on the computer, but at this point the system can start checking the integrity of your files, search for windows 7 errors, and you will see a blue check screen.

It is not necessary to be afraid of it, it is necessary to scan the entire file system and the registry, the OS checks the hard drive of the computer on errors specially built-in utility.

But sometimes the user needs to check its local disk itself, if glitches or hangs are seen, it can be done like this:

Open the "Run" field from the Start menu;

Enter the "CMD" command and press ENTER.

A window will open, set the value to "restore damaged sectors", that is, stand the checkboxes, this option of the service utility will help correct system errors due to a sudden failure.

You can also run this operation from the command line, but necessarily as a computer administrator:

In the Start menu, locate the "Command Line" position;

From the context menu (right mouse button), select the "Run on the name of the administrator" item;

In the opening window that opens, "Chkdsk C" (without quotes), and press ENTER.

The test of the hard disk is launched by the same utility.

But there may be another situation when the system cannot start checking its files due to the fact that it is already running, it can be immediately seen on the screen from the message. To activate the scan, click on the "Y" position, the computer will restart and the error correction will start immediately after the computer starts.

What happens in the end?

This utility built into the installation package of Windows 7 will be checked for the integrity of the system files that are necessary for the proper operation of the operating system. If broken or damaged clusters are found, it will try to fix them and restore, in this case is not recommended, you just need to wait for the completion of the process.

Solving Problem Screen Screen

If you notice that the check screen began to appear after each computer start, you can try to correct the error reinstalling Win 7 from the disk, the problem must disappear. Do not forget to copy important information to the removable medium so that after reinstallation you could use it.

But it happens, when most of the work is made, and suddenly it is lost because of a serious failure, it is lost, so you yourself take care of the safety - throw out important information on the removable media and more often press F12, this function button will save your work in the right place.

Other errors are displayed by the message "Stop ...."

If the system utility itself does not do anything, then the message "Stop ..." is displayed, the codes of all system errors are located below, because of which there are problems with the computer.

But if it still works, carefully examine the digital codes that are visible on the screen, they can mean the most different problems:

Incorrect installation Win7, code 0x80300024

Sometimes inexperienced users do not pay attention to the system messages during the installation of the OS, forget to format the partition of the hard disk to which Win 7 will be installed, then they are trying to download the system. From this, typical errors arise:

• Incorrect marking of the local disk;
• Not enough space on the hard disk to install the OS;
• Installing OS to logical instead of the main partition.

Fixing the problem

Before installing, check if there is approximately 15 GB for Win7 32-bit, and for 64 - 20. And if you install professional or corporate versions, then the places should be 2 times more.

It will be useful to check the type of disk, it must be as "main". You can do this by the DiskPart program, it will be able to change the type of section or create another, without interrupting the Win7 installation process.

You can run it from the command line combination F10 + SIFT by entering the DiskPart + Enter value.

Increase processor temperature or video card
The system displays error codes, but most often you can see the 0x00000124 identifier, denoting overheating.
Check the temperature mode by two ways - either through the BIOS setting, or third-party software.

Check with BIOS
If the computer works, reboot, and at the time of the start, press F2 or the DEL button;
The basic settings page opens, go to the Health Status or System tab;
Here will be a visual graph of the current temperature, which is marked in red - dangerous for the computer and Win7, the system can incorrectly work correctly.

Check through third-party software
The Everest program has long been used to diagnose Windows and in its computer software. A convenient control panel will allow you to test any system partition or program, indicate its volume and effect on speed.

Speccy. Absolutely free, this is a powerful diagnostic tool:
Control is simple, in the main window you can track the most different parameters of the entire computer or system files.

Decision
Purchase a special stand with a fan - the housing will be cooled while working, where the processor is located, according to the law of physics, it will overheat less;
Attributed to the repair shop and put on it a special paste for cooling - overheating will significantly decrease.

Conflict equipment

If Win7 cannot run your equipment, such as a printer, removable media, etc., you can see the most different error information, we will give examples of the most common of them:

Code 3. - Installation driver download file is not fully or there is not enough space on the hard disk.
Solution - deactivate unnecessary software and reinstall the device driver;
Code 8. - The old software version is not deleted, the installation of the new version is not possible.
Code 10. This means that the system cannot start this device.
Decision - Download and install the new version of the device manufacturer. You can update from the Device Manager: Start - System - Dispatcher.
Pay attention to the yellow question mark - this means that the driver conflicts with system files, it is outdated and does not meet the claims.

From the Properties menu, click on the "Update ..." option;
Code 14. means that a reboot is needed for correct operation;

Windows error codes and value. (List of Windows errors)

It is impossible to create a file, as it already exists.

Incorrectly specified the name of the catalog.

The system fails to find the specified file.
The system fails to find the specified path.
The system fails to open the file.

The file of additional attributes is damaged.
The file of additional attributes is full.
No access.

Tom for the open file has been changed from the outside, so that the file is not possible.

Invalid window descriptor.
Damaged control blocks of memory.
Not enough memory to handle the team.
Invalid memory block address.
Windows error in medium.
An attempt was made to download a program having an incorrect format.
Access code is incorrect.
Error in data.
Not enough memory to complete the operation.
The system fails to find the specified disk.
Unable to delete the directory.
The system fails to move the file.
The media is protected from recording.
The system fails to find the device.

The system fails to open the specified device or file.
Specified too long file name.

Unable to remove the blocking from the file area.

Disks, removable media, processes

Tom label length exceeds the limit set for the file system.
The device is not ready.
The length of the command is too large.
Could not find the specified area on the disk.
No access to the disk or diskette.
Could not find the specified sector on the disk.
The system fails to record to the specified device.
The system fails to read from the device.
The connected device does not work.

The wrong device name is indicated.

Attempt to record information about the device, which have already been recorded.
The process cannot access the file, since this file is occupied by another process.

It fails to complete the required operation due to failures in data on disk or non-empty media error.

A discrepancy between the flexible disc sector identifier field and the controller path address is detected.

Flexible disk controller returned incorrect registers.
A multiple failure of the verification operation fails when accessing the hard disk is recorded.

A multiple failure of the operation when accessing the hard disk is recorded.
When accessing the hard disk, the controller was reset, but it was not even possible to produce it.

The error returned by the flexible disk controller is not recognized by the driver.

The process cannot access the file, since the file is locked with another process.

Inserted disk inserted into the device. Insert% 2 (serial number of volume:% 3) into the device% 1.

Too many files are open for sharing.
The end of the file will be achieved.
The disc is filled.
Could not create a file or directory.
Interrupt failure int 24.
Not enough memory to handle request.
The name of the local device is already used.
The parameter is defined incorrectly.

Unable to block the carrier removal mechanism.
Could not remove the carrier.
The carrier in the device could be replaced.
[ 1111 0x0457] The input / output bus was initialized again.
There is no media in the device.
The address label of the identifier is not detected on the flex disk.
Currently, the system fails to run another process.

Insert the disk into the device% 1. ( Standard errorWindows)

The program was stopped, since the desired disk was not inserted.
The disc is busy or blocked by another process.

Not enough space on the disk.
Internal file identifiers are exhausted.
The data area transmitted by the system call is too small.
Syntax error in the file name, catalog name or Tom label.
Invalid system call level.
The disk does not have a Tom label.
The specified module is not found.
No indicated procedure found.
Subsidiaries, the endings of which are required to be expected.
Appendix% 1 cannot be launched in Win32 mode.
Attempting to use a file descriptor to open the disk partition and perform an operation that differs from the input / output of the lower level.

Attempt to put a pointer to the file before starting the file.
The pointer to the file cannot be set to a specified device or file.

Join and Subst commands cannot be used for disks containing already combined discs.

Attempt to use the Join or Subst command for a disk already included in the set of combined disks.

An attempt to use the Join or Subst command to disk, which has already been displayed.

An attempt to remove a sign of combining from the disk for which the Join team was not performed.

Attempting to remove a sign of display from the disk for which the Subst command was not performed.

Attempt to combine the disk with the catalog on the combined disk.
An attempt to display the disk to the directory located on the displayed disk.
An attempt to combine the disk with the directory on the displayed disk.
An attempt to display the disk to the directory on the combined disk.
Currently, execute the Join or Subst command is impossible.
The system cannot combine or display the disk to the directory (with the directory) from the same disk.

This catalog is not the root subdirectory.
The catalog is not empty.

The specified path is used for the displayed disk.
Not enough resources for processing the team.
The specified path is currently used.
An attempt to combine or display a disk, the directory on which is already used to display.

Semaphors

No specified name of the system semaphore was found.

Too many attempts to enact events for the semaphore.
Unable to create another system semaphore.
Exclusive access semaphore is busy with another process.
Semaphore is installed and cannot be closed.
Semaphore cannot be reused.
Requests for semaphores of exclusive access at the time of interrupt execution are not allowed.

Expired semaphore waiting interval.
This semaphore no longer belongs to its process.
Calling the IOCTL application is incorrect.
The data recording check parameter is incorrect.
The system cannot process the resulting command.
This feature is permissible only in Win32 mode.
The number of semaphores for Dosmuxsemwait is defined.
Dosmuxsemwait call. Installed too many semaphores.
Incorrect call Dosmuxsemwait.

ErrorsWindows System registry

The specified operation cannot be performed in full screen mode.
Attempting reference to a non-existent element.
The registry database is damaged.
The registry parameter is incorrect.
Unable to open the registry parameter.
Unable to read the registry parameter.
Could not write the registry parameter.
One of the files in the registry database was to be restored using a protocol or backup. Recovery has passed successfully.
The registry is damaged. The structure of one of the files containing the registry data is damaged. The image of the file in memory may be damaged, or the file failed to restore due to the lack of a backup / protocol.
The input / output operation initiated by the registry ended with the incorrect failure. Failed to be considered, write or close one of the files containing the registry system.

When you try to download or restore the registry file, it turned out that this file has an incorrect format.
An attempt to make an invalid operation on the registry parameter marked for removal.
Failed to allocate the required place in the registry protocol.
You can not create a symbolic connection for the registry parameter that already contains subparameters or values.
You can not create a static subparameter for a temporary parent parameter.

ErrorsWindows When starting services

The stop command was sent to the service from which other services depend.

The team is inappropriate for this service.
The service did not respond to the request in a timely manner.
Failed to create a stream of commands for service.
The service database is blocked.
One copy of the service is already running.
The account name is specified incorrectly or does not exist.
The specified service is disabled or cannot be launched.
An attempt was made to establish a cyclic dependence between services.
This service is not installed.
The service currently cannot receive commands.
The service is not running.
The service process cannot establish communication with the service controller.
Service error when processing a team.
This database does not exist.
The service returned the error code.
The process was unexpectedly completed.
Failed to launch a subsidiary service.
The service is not running due to failure at the entrance.
The service has already been registered.
This service does not exist.

"Immediately after the launch, the service" "hung". ""
Locking the database of the specified service is imposed incorrectly.
This service was noted to delete.
This service already exists.
The system is currently working using the latest correct configuration.

From the moment of the last loading attempts to launch the service did not make.

The subsidiary does not exist or was noted to delete.
The current configuration has already been involved as the source of the last correct set of parameters.

The name is already involved as a service name.

Tape errors

The file label has been achieved.
The start of the tape section was found.
The end of the file set is achieved.
There is no longer any data on the ribbon.
Unable to create partitions on the tape.
Incorrect block size when accessing a new tape of a multi-volume partition.
Section information when loading the tape is not detected.
The multibite code page does not have a symbol for one of the Unicode codes.

The physical end of the tape has been achieved.

Device errors

There was a failure in the Dynamic Library Initialization Program (DLL).
The request was not completed due to an input / output error on the device.
None of the serial devices was successfully initialized. Driver serial devices will be unloaded.

Unable to open a device using a common interruption with other devices (IRQ). At least one device using the same IRQ request has already been open.
The sequential I / O operation was completed as a result of the next write operation to the serial port. (IOCTL_SERIAL_XOFF_COUNTER value reached 0.)
The sequential I / O operation was completed after the expectation period. (The value of IOCTL_SERIAL_XOFF_COUNTER has not reached 0.)

The probability of interlocking is detected.
Basic address or offset have incorrect alignment.
An attempt to change the power mode was blocked by another application or driver.
Error shipping command application.
Not found one of the library files required to execute this application.
The device is currently not attached, but the information about it is present in the configuration.
The requested operation was not executed, since the user is not registered.
It is required to continue the operation.
Attempt to perform an initialization operation that has already been carried out.
No more local devices found.

Account errorsWindows, Quotas, passwords, users

There was no compliance between usernames and defense identifiers.

User account expired.

System quotas for this account are not installed.
Encryption key is not available.
The NT password is too complicated and cannot be converted to Lan Manager password. Instead of the Lan Manager password, an empty line was returned.
The version of the changes is unknown.
Two levels of changes are incompatible among themselves.
This protection code cannot match the object owner.
This protection code cannot correspond to the main group of the object.
An attempt was made to use the element of impersonification by the flow of commands, which at this time does not produce the process impersonation.

The specified right of access by the client is absent.
The specified name is not the correct username.
The user with the specified name already exists.
The user with the specified name does not exist.
The specified group already exists.
This group does not exist.
The specified user is already a member of the specified group, or the group cannot be deleted, as it contains at least one user.

The specified user is not a member of a given group.
The last account from the administrator group cannot be disabled or deleted.
Could not update the password. The current password was specified.
Could not update the password. The new password contains invalid characters.
Could not update the password. One of the update rules was broken.
Part of the data protection code is incorrect.
The access control list (ACL) has an incorrect structure.
Data protection code has an incorrect structure.
Data protection descriptor has an incorrect structure.
Unable to build an access control list (ACL) or the element of this list (ACE).
The value is defined incorrectly.
Not enough memory to update information related to data protection.
These attributes are incorrect or incompatible with the group attributes as a whole.
The required level of impersonitization is not provided, or the proposed level is incorrect.
Could not open an unknown level data protection element.
Required an incorrect class of information for checking.
The type of item does not match the required operation.
Operation associated with data protection cannot be performed for an unprotected object.
The protection system database contains internal contradictions.
Universal access types are contained in the access mask, which should already be associated with non-standard types.

The protection descriptor has an incorrect format.
The required action can only be used during the login process that caused its process is not registered as related to the entry procedure.
Starting a new session of work with an already used code is impossible.
The authentication package is not identified.
The operation does not match the current state of the entry process.
The session code is already used.
The input mode is defined incorrectly.
It fails to provide a view through a named conveyor until the data is read from this conveyor.
The operation is incompatible with the state of the transaction for the registry branch.
The protection database is damaged.
The operation is not intended for embedded accounts.
The operation is not intended for the built-in special group.
The operation is not intended for the embedded special user.
You can not delete the user from the group, as it is for him the main one.

The element is already used as the main element.
The limit on the number of secure data / resources for one system has been achieved.
The length of the protected data exceeds the maximum possible.
The local protection database contains internal inconsistencies.
In the process of entering the network, too many protection codes were used.
Log in is not manufactured: The selected login mode for this user is not provided on this computer.

You cannot add a new user to the local group, since this user does not exist.
You cannot add a new user to the group, since this user has an incorrect account type.
There are too many protection codes.
For password change, an encrypted password is required.
Access Control List (ACL) does not contain inherited components
File or directory is damaged. Reading is impossible.
The disk structure is damaged. Reading is impossible.
The number of connections to the service is limited. Additional connections are currently impossible.

Program to eliminate windows (Windows) errors Kerish Doctor 2017.

Within 15 days the program will serve the computer IS FREEAfter which you can activate the full version.

Error solving (video)

Good day, readers.

Microsoft operating systems often face situations when there are various errors. Over time, they accumulate, which only leads to deterioration of the device. To prevent it, you need to have an application that can correct everything automatically. At the same time, the tools will help to cope with the inconsistency of the registry, inconsistencies of file associations, incorrect labels and many other, preventing the right functioning of the equipment. Further in the article, I will tell you how to correct the errors on the Windows computer 7 in several ways. Users can only choose the appropriate.

Despite the name, this application is not only suitable for the latest version of the operating system from Microsoft. At the same time, it can be used for both maximum assembly and home.

The application has a weight gain:

a wide range of tools for free automatic correction of problems (not opens " Start", Shortcuts and applications, blocking system regions) are not launched);

no need for installation;

providing detailed information regarding manual correction of each individual error.

True, the program does not provide a Russian interface.

Kaspersky Cleaner.( )

Relatively recently the most famous Russian company offering antivirus software - Kaspersky placed a new utility on its web resource.
Cleaner You can download free. It has a wide range of functions, including:

The program has a mass gain:

maximum simplicity - the application will be understandable even for a novice user;

a Russian-speaking interface is provided;

"Smart" correction of problems, which will help not harm the system.

In general, the program allows you to quickly and without reinstalling the system to return the performance of the computer.

Microsoft Fix IT.( )

The developers of the most popular operating system in the world perfectly know that with their brainchild, there are sometimes problems. Therefore, they presented a tool that allows for free and quickly correct the most famous illegal diseases.

The program finds a solution to a specific problem existing and automatically makes everything to cope with it. Also this tool is distributed called Easy Fix. You can download it as well as from the official site of Microsoft.

Using an application is carried out in several movements:

You need to choose the area to which the problem relates.

A text description will appear.

If necessary, place an application on your device for automatic correction.

Built-in program( )

Usually Windows users of the professional version and any other do not even pay attention to an important point in the control panel - " Troubleshooting ..." This decision can help deal with many ailments of the system.

Just run the application. Find the item " View all categories" A complete list of all fixes that are in automatic mode and do not need to be connected to additional programs will appear. Although not always, but often these tools help cope with the problem.

If necessary, an interaction option from the installation disk is provided. True for this first it is necessary to properly place the program on the removable device.

Anvisoft PC Plus.( )

The application is like something FIX IT.. True has a more convenient functionality. The main advantage - corrections also work for the last two versions of Microsoft operating systems.

To work you need a little:

Install the application and run it.

After you need to find a specific error and click " FIX NOW." Then the application automatically does everything you need.

It is worth noting that to solve most problems, you need to have an Internet connection to download missing system files.

In this case, the software has several drawbacks. So, for example, a Russian interface is not provided here. In addition, it is proposed relatively few tools. But at the same time, their number is constantly growing.

Already, the application is able to correct:

• label errors;

  problems associated with the launch of programs due to the lack of supply files * .dll (libraries);

  deal registry editor, task manager and more.

Well, the main advantage of course is to install only the desired solution. The program does not want to additionally place a lot of additional unwanted applications on the computer.

AVZ.( )

Initially, this program was created as antivirus software. At the same time, it has a small addition " System Restore" It allows you to automatically correct many errors encountered in Operation. To do this, it is enough to perform several movements:

We place an application on your device. It works only in such a way, so it will not be possible to use it from the installation flash drive.

We launch and note what needs to be corrected.

Command line( )

In addition to the above-described applications in Windows, there is also a tool that allows you to check the integrity of system files and correct them if necessary. To do this, you need to perform several actions:

Go to " Start", And then in" Service».

Press the PCM on the command prompt and run it from the administrator.

A new window will appear with a black background. In the command line we prescribe " sFC / SCANNOW."And confirm by pressing" ENTER" The corresponding tool will start, which automatically check and fix it. At the same time, such possibilities are in all the latest versions of Microsoft Orsts, regardless of the bit - 32 or 64 Bit.

For a detailed analysis of the topic, you can view the appropriate video:

I hope you will deal with all the illnesses that affect the computer's work. Subscribe and tell others.

We all make mistakes from time to time. Everyday errors include error in a specific task (in the letter, set of text, diagram, and the like), the insult of the person, the action that you subsequently regret participation in risky situations. Since unpleasant randomness is quite common, we all need to learn to correct them and cope with them. Correction of any slip includes: understanding your mistake, drawing up a plan, care for yourself and proper communication.

Steps

Part 1

Understand your mistake

Recognize your error. To fix something, you first need to understand what you did wrong.

• Determine the error. Did you say something wrong? Accidentally made a mistake in a school or work project? Forgot to wash the bathroom, as promised?
• Understand how and why you committed a mistake. You did it on purpose, but later regretted it? Or have you just not been attentive enough? Reflect on the situation, for example: "How did I forget to get into the bathroom? I did not want to get out there, wanted to avoid this work? I was too busy? "
• If you are not sure what they did not do, ask a friend, family member, teacher, employee, boss, so that this person helped you find out what is the mistake. For example, if someone is angry with you, you can ask: "I see that you are angry with me, can you explain why?". A person can answer: "I am angry at you, because you said that you will be removed in the bathroom, but you didn't do it."

1. Remember your past errors. Pay attention to your behaviors and on what such problems have been in your past. Was it so that you and in the past forget something to do?

   • Record all patterns and themes that you noticed continue to arise. This will help you determine a larger goal that you need to work (focus, certain skills, and so on). For example, you may be inclined to forget about those tasks that do not want to perform, for example, about cleaning. This will be a sign that you dodge the task or what you need to become more organized in order not to forget to fulfill certain obligations.

2. Take responsibility for yourself. Understand that this is yours and only your error. Take responsibility for your own mistakes and do not try to blame the blame on someone else. If you play in search of the guilty, you will not be able to study on your own misses, as you can continue to make the same mistakes again and again.

   • Write down those parts of the problem you have highlighted, or a specific error committed.
   • Determine what exactly you could do differently to get the best result.

   Part 2

   Make a plan

   1. Think about past solutions. One of the best ways to solve the problem or fix the error is to determine how you coped with similar problems or errors in the past. Flee the following: "In the past, I did not forget what I need to do, how did it work? Ah, for sure, I recorded things to the calendar and looked at it several times a day! ".

      • Make a list of such errors you have committed. Determine how you cost each of these mistakes, and whether it was useful for you or not. If not, it is likely that this solution will not work this time.

   2. Consider possible options. Come up with as many ways to correct the error. In our example there are many options: you could remove the bathroom, apologize, suggest to get out in another part of the apartment, agree, do it the next day, and so on.

      • Use your problem solving skills to come up with possible options for solving the current problem.
      • Make a list of advantages and minuses for each possible solution. For example, if you have determined that one of the possible options for solving your problem is a nexicated bathroom will be "be sure to get into the bathroom tomorrow", the list of advantages and minuses can look like this: Plus - the bathroom will eventually be clean, cons - today it will be undershot, Tomorrow I can forget about cleaning (I can't fully guarantee that it will be done), it will not help solve the problem that I forgot to get into the bathroom. Based on this assessment, it would be better to clean up the bathroom on the same day, and not the next, if possible, and develop a plan of how in the future, do not forget to clean in this room.

   3. Decide with the order of actions and perform them. To solve the problem, you need a plan. Determine the best possible solution based on the past and possible options, and be committed to its implementation.

      Formulate a spare plan. No matter how reliable the plan seemed to, there is a possibility that he will not solve the problem. For example, you may be removed in the bathroom, but the person who asked you to do is still angry with you.

      • Determine other possible solutions and write them down from the most useful to the least useful. Come on the top view from top to bottom. You can relate to possible options: to offer to be climbing in another room, sincerely apologize, ask a person how you can chat the guilt, or offer him what he likes (food, classes, and so on).

   4. Do not allow mistakes in the future. If you can successfully find a solution to your error, then you start the process of success in the future avoidance of errors.

      • Write down that, in your opinion, you did wrong. Then write down the goal of what you want to do in the future. For example, if you forgot to be climbing in the bathroom, you may have such goals: write a list of tasks for every day, twice a day check it, check the tasks performed, stick to the refrigerator stickers with a reminder for the most priority tasks.

   Part 3.

   Take care of yourself

   1. Do not be too strict with yourself. Understand that everyone makes mistakes, this is normal. You can feel guilty, but you need to take yourself as you are, despite your weaknesses.

      • Forgive yourself and move on, instead of buying on your problem.
      • Focus on now to continue to come correctly.

   2. Keep your emotions under control. When we make a mistake, we can easily overtake the feelings of disappointment, depression, may have a desire to surrender at all. If you are experiencing excessively strong emotions or stress, take a break. Increased emotions will not benefit you in trying to correct your mistake.

   3. Card. Focus on how to combat negative emotions that can make you feel better. Think about how you coped with mistakes in the past. Determine the ways that helped you correctly cope with the problem and ways that only aggravated your condition.

      • Common strategies include: a positive internal dialogue (talk about yourself good things), exercise, relaxing classes (for example, reading or game).
      • Self-depleting behavior, for example, self-destructive behavior, for example, is the use of alcohol or other substances, causing physical harm, repetitive thoughts and negative reflections about themselves.

   Part 4.

   Communicate effectively

   1. Be convincing. Use positive interaction skills, talk about your thoughts and feelings relevant way and with respect for the interlocutor. When you are affirmative, you acknowledge that it was wrong and take responsibility for your own guilt. You do not blame others in your mistakes.

      • Do not be passive: you should not avoid talk about your mistake, hide, agree with what others want from you, and not defend themselves.
      • Do not show aggression: do not increase the tone, do not shout, do not humiliate people, do not curse, do not show violent behavior (do not strive things, do not decrease your hands).
      • Avoid passive aggressive behavior. It is a mixture of passive and aggressive forms of communication, when you can be angry, but do not express your feelings. Therefore, you can do something in a person behind your back to revenge, or arrange a boycott-silence. This is not the best form of communication, in addition, a person may not understand what you are trying to tell him and why you do that.
      • Send positive non-verbal messages. Our non-verbal communication also sends certain messages to people around us. Smile, for example, says: "Yes, I have to frown, but I can be brave and go through it."

   2. Use active listening skills. Let the upset person pour out your disappointment and are not treated with the answer.

      • Try to focus only on listening to a person, instead of thinking about how to answer him. Focus on the thoughts and feelings of the person who are listening, and not on their own.
      • Make a brief statements and ask clarifying questions, for example: "I realized that you were angry and upset because I didn't get into the bathroom, right?".
      • Match out. Show an understanding and put yourself in place of another person.

   3. Apologize. Sometimes, when we make mistakes, we can hurt other people. Apologize in front of a person, so you will show that they regret the perfect mistake, feel guilty for the damage caused and want to do better in the future.

      • Do not try to find excuses and explain everything. Just admit your miss. Tell me: "I admit that I forgot to get clinging in the bathroom. I'm sorry ".
      • Be careful not to accuse others. You should not say something like: "If you remind me that you need to get out there, then maybe I would not forget, and the bathroom would have been clean."