The Acer Aspire V3 571G laptop is included. Not included laptop Acer

Acer laptops have one wonderful and convenient feature for recovery, without the use of disks with the system image. The company manufacturer of laptops data recorded a system for restoring a system that takes only a few gigabytes in a hidden partition of a hard disk.

In order to restore Windows 8 on a laptopYou must turn off your PC and be sure to connect the charger.

When the laptop is turned on, as soon as the Acer logo appears, simultaneously press the Alt + F10 key combination, better several times.

When you click the keys, the branded program for recovering Windows 8, which is called Acer Erecovery Management. If this utility does not start, check in the BIOS, whether the DISK-to-Disk (D2D) function is activated. If Erecovery Management asks a password, then try entering Standard AIM1R8, 000000 or 00000000. If you have any problems with the entrance to the utility, we advise you to contact the service.

After the utility booted, you need to select "Full Restoring Factory System Settings", this option restores the system to the factory state. You should also pay attention to the presence of the recovery function with saving user files and data. But if you decide to use the second option, after viruses or unstable work - it will not help for a long time.

Now that you have decided on the recovery method, read the WARNING and click on the Next button.

The process of copying and restoring system files will begin. This procedure will take about 15 minutes. Wait for the end.

Then click "OK", the system will restart.

After restarting the laptop, the program on the initial one will start.

Full Windows 8 Recovery on Acer Laptop Completed. Next, the operating system desktop will start and the window will appear at the bottom of the screen, where the installation process of utilities and the necessary drivers will be displayed. Wait until the installation is completed. It will take about 20 minutes.

If during the installation of drivers and utilities will appear proposals to reboot PCs - choose the "Restart later" item. The pre-installed antivirus program will sometimes display a request to change the registry - agree.

At the end of the driver installation utility and programs will delete all temporary files and restart your laptop.

That's all! You have restored Windows 8 on your laptop from the hidden partition of the hard disk.

RESET RAM Notebook

If instead of an image on your laptop you see a black screen, only indicators are burning, and all attempts to turn on the device do not bring any result, check if the battery charge is sufficient. To do this, connect the charger, and leave the laptop alone, for 30 minutes. After that, try to enable it. If the problem is not eliminated, then you can repair yourself in one of the following ways.

The first method - reset hardware settings

First, turn off the gadget, disconnect it from the network, then remove the power supply from it.

After that, we need to remove the entire residual charge and reset all the hardware settings to the initial level. We carry out this with the help of uncomplicated actions - click on the switching button of the laptop and hold it 25-30 seconds.

After that, you should insert the battery back to the laptop, connect the charger and, of course, turn on the laptop. After all this, you will only find and select the OS load from the proposed list in the usual mode. This procedure can be performed thanks to the keys on which arrows (up and down) are depicted.

The method of the second is a reset of RAM

If the previous way did not help, disconnect the laptop, remove the battery and charger from it. Turn over the laptop, find the cover on its back panel and remove it with a small screwdriver. The lid should be only in one instance, so finding it will not be difficult.

Then, under the lid, find the RAM. It should look like in the figure below. Gently remove the RAM from its slot, without exerting excessive physical impact on it.

Postpone the extracted fee to the side. After 5 minutes, install the RAM, but in another connector other than which it was extracted. If the slats are somewhat - just change them in places.

Make a laptop assembly and turn on the device.

If you are not ready for such serious technical interference, then it is better to trust this work to masters by repair of laptops Acer..

Method Third - BIOS Software Reset Settings

If your laptop hangs on a black screen during the boot process, we enter the BIOS menu. To do this, we find and press the F9 button while rebooting / starting the device (this may be the other key, depending on the laptop model).

Well, then we need to find and activate the "Return to the factory settings. Please note: this option may have different names, which depends only on the laptop model. Here are Name Options: Load Bios Setup Defaults, Load Failsafe Default or Load Safe-Fail Default.

Four-way method - BIOS hardware reset

There is also hardware reset BIOS settings . What it is, as it is correct and safely spend such a reset in our blog.

If none of these methods help eliminate the malfunction, we advise you to contact the service center for serving the Acer technique, since the breakdown may be much more serious than you assume.

We still hope that they could help solve your problem. We wish you good luck and uninterrupted work with an entertainment technique!

Q: Acer Aspire V3 571G does not turn on after cleaning

Acer Aspire v3 571g does not turn on after cleaning. The first time disassembled collected, everything worked. If re-actions stopped burning LED sensors and the laptop does not respond to the power button. After clicking on the power button or attempt to connect the adapter the motherboard and all.

Answer: ruzalit., buddy ... Have you read the topic? LBP think too ...

Question: Acer Aspire ES17 laptop After rebooting hung on the Acer logo

The Acer Aspire ES17 laptop after the usual reboot is hung on the logo, does not respond to pressing the buttons to enter the BIOS, the cooler when pressing the power button first spins, but after 1-2 seconds stops. Disassembled a laptop, HDD when you turn on the rustle (works). I tried to sequentially disable the keyboard, RAM, hard disk, Wi-Fi controller (well, or how it), even the cooler itself - the result is always the same, hanging the logo, with the exception of when it took the script bar at all The slot for it is one, I tried to change the script bar to another, ESC, F1, F2, F8, F11, ALT + Ctrl + Del - I tried to press and clamp when the laptop is turned on, the result is zero. It walked on similar problems on the Internet, I decided to reset the bios, the only button that I was able to find on the board similar to the characteristics to reset the bios, clamping it and for a couple of seconds and 30 seconds - did not help. Removed the battery for battery autonomous work by 40+ minutes, also did not give the result. Already the head flops. Help me please.

A file is attached to the message. Size - 146kb.

Answer:
And when disabling the HDD, also hangs on the logo? And nothing more writes and does not allow you to enter the BIOS settings?

For assers, different combinations are used, google and try, and even better locate in the instructions
Most likely Ctrl + ESC + F2
But maybe Ctrl + F2, and others.

IMHO ADVANCED SYSTEMCARE FREE Something slewed there.

Question: Acer Aspire 5942G - turns on, and then turns off

We have acer aspire 5942g laptop. I5 430M, 4GB MEMORY, RADEON 5650.
After three months of layering on the shelf, I decided to get it, but he completely turns out to work.
Turns on, then seconds, 5 shuts off. Turning off is accompanied by a hard rod, as far as I understood.
Then there is a cycle of infinite five-second inclusions / shutdowns, while on the monitor, even the ice-backlight does not work.
A couple of explanations: I tried without a battery - the same. When you turn on for a second, the Hard indicator lights up. I sin on Radon, and what do you say?

Answer: Place model?

Question: Acer Aspire 6935G turns on automatically when the adapter is configured

Acer Aspire 6935G ..... And then it constantly turns off by itself with a reboot ...
In the saidmode, it seems so far ....
In the process, I noticed that the calendar is standing in 2001 ... I do not even replace the battery ...
And then - to see the boom ....
(I think we need tips ...

Added after 2 hours 56 minutes
... For example - where the file is lying with the download protocol ... I called it so much - I don't know how it is officially called ...
I think in my case he would like to tell a special ...

Answer: ////
.... yes, as they say, the Forevy Futs ...
.... it turns out not to try to disappear by two carriages (as I tried to do it) - and just a thin blade it is peeled .... Lehko ....
.... there was an unpleasant moment .... I do not turn it on the first time .... Wallpaper they are Tama internal laptop saved the place - when the valve struck the valve with difficulty - the disagrement of the display hooked .... found, corrected ...
Immediately threw the consperters of clay 4x22 mk ... besides renewing 4x330

Question: Acer Aspire 5520 # 2 After Farming Artifacts

Acer Aspire 5520 Another patient was just dead, the reaction to the button was not.
Frozen crystal together with chip, gave initialization.
The screen becomes gray with vertical stripes, then the laptop fades
And the power button blinks once every 3 seconds (as if it is in sleep mode and access to the disk, the diode blinks)
The screen in the end goes out.
With repeated inclusions, it immediately goes into such a "sleeping" having grown a couple of seconds to the maximum.
If you stand for a long time, the first switching on again gives a gray screen with stripes.
Question: Not Dadzhil? (Up to 250 degrees brought about a minute) or there is a problem somewhere else or you can immediately change it without trying to revive.
Revive it is necessary temporarily.
I just do not know if at least one ball will go away whether he will work at all and where it is positioned,
Crystal or chip?
It does not go to the exterior.

Answer: In general, overheating is exactly. But to calm the seduction of the germs still nvidia.

Added after 12 seconds
Just not so perverted

Question: Acer Aspire 5750Z - turns off after the DC cord is replaced

There is Acer Aspire 5750Z. The other day broke down the cord of the charger (right near the plug). I went to the store of radio equipment, I bought a replacement, I soldered at home in the power supply, a little narrowed the "middle" (the gap was more for some reason). Started, works, excellent. Later, I noticed that the laptop turns off, with just in the time of work (for example, I go through the chrome on Ukr. It is not immediately off., As if the charger was taken out.) If you turn on and not touch - the shutdown does not occur. Shutdown randomna, from minute to half an hour. Laptop without a battery. What is strange, on Linux does not turn off, and from under Windows flies. We are hardly about the viruses, it is not there, there was no such breakdown. Ideas?

Answer: Plug in BP change the laptop suitable to the power socket so that the tight contact is and never hung.

Question: Acer v3-571g (LA-7912P) Floating charging and dump video device

Brought me a week ago a laptop with a problem that the screen turns black from time to time. A fast load in Aida gave the result that the laptop is warm at 100 and visually visible a lot of dust in the loops.

The black screen - doped by the video driver of the integrated video card (naturally tried to rearrange the driver).
The sentence is to clean and look. Agreed in a week. A week later, I was brought to me and I took it to my cleaning, checked what was turned on and began to disassemble. In the process began to understand that he was only recently cleaned, the dust is not incl. disappeared on loops. I still wondered once again, changed the thermal paste, cured the loop, gathered ...

And then the problem No. 2 was opened: the laptop on charging constantly beeps once it stops charging, then again begins, it usually happens at 95% of the battery and does not go higher, if you charge a little discharged battery, then there is no such thing yet to level 95 %. Without a battery, it works fine, even the video driver did not catch. I voted another battery knowingly good - first everything was fine, then in Windows her OS rejected and asked to change, in general, the charging did not go. Charging is good, twin and the other.

Actually, where to look, I can not believe that with charging my jamb - came through 2 more than 2, looked, everything is in order in terms of the assembly, everything was done neatly. I think that after all the problem was initially (but then why did not immediately notice a week ago?) Or after cleaning, someone could have any other. Before my cleaning, I did not check the laptop sufficiently (I did not connect to charging).

Problems may be related? Where to look?

Answer:

Chernomor wrote (a):

Lyrics alone .. without a single measurement. Lyrical advice - stupidly suck the tail of the power to the charge jack.

You know, as in medicine, there are diagnosts, and there are surgeons :)
Without a battery, everything is perfectly running from the network, in the hour 2 loads did not even have a video crash.
I also tried to fully discharge the battery, and then charge - problems while charging the battery did not reach 95% (when charging starts to catch), i.e. Up to 95% was not a video device failure and there were no glitches with charging battery.

diderheb wrote (a):

Black Screen - it did not blame the video driver. This is a overheated video card. And if after cleaning it will stop buggy means you are lucky. But most likely it will not stop buggy.
Charging can be different options. The killed charger (does not produce the desired power, the wire break, mainly next to the conversion), problems in the supply chains (it was flooded, cold soldering, ceramics, charger, etc. etc.), power management drivers (on some laptops , mostly Lenovo, in the drivers there was an option to disconnect charging after 60%, but this is not your option).

After cleaning, nothing has changed. That's right: black screen \u003d overheated video card \u003d dump video driver in the system.

Charging is alive, replaced the workers' knowingly, from the same laptop native - the symptoms are the same.

"Problems in nutrition chains (it was flooded, cold soldering, ceramics, charger, etc. etc.)" - I tend to this, but there is not enough knowledge to understand what to check on the floor of the board (battle and charging told the deliberately workers , With the battery, the stranger did not affect at all), only she remains, and that the power circuit is not taking a dotumku. Datasheets Only on one separate item I can read, I'm lost on the mat's mat.

Thanks for answers! I hope that I will not annoy my profanism. From the meters there is only a Chinese multimeter.

Answer: ///
.... Well ... in the morning in the open, then a good mood ... I decided - be it, it will be .... (the intermediary also learns to repair beeches ... Concaluned the whale keys ... and it began to turn on. .. so I thought ... I am sleeping back these keys ... and he will run away)
But Beoch was pretty ... nothing happened .... threw a jumper - the desired 1.5V appeared on the SU12 ... stopped cycling ... and perhaps the assault .... there are no more changes ....
I'll ask a neighbor with an interesting Italian nickname and with the same mother - when it turns on you ... the valve twitches and spinning ... or not? And then your whole topic is read-not to reread ...

Added after 2 minutes
... maybe it's time to reflash che-thread?

Q: Acer Aspire V5-552G - lags in the game, overheating

People, help, I have a Ultrabook, Acer Aspire V5 552G, bought FIFA 17, downloaded from Origin, I installed, I launch everything perfectly loaded, the picture is clear, but then .... Lagi, everything floats, it is impossible to play ... Beech began to warm Furious what to do? Tell me

Question how to return the laptop Acer Aspire V5 factory settings? The laptop is not loaded to the end, a black screen appears when loading. Important data is available only on the disk (D :), it would be good if nothing happened to them and only the disk returned to the initial state (C :). For all the instructions, you need to press when loading Alt + F10 and we must get into the rollback program to the factory settings, but in my case the laptop simply reboots. It may be that the hidden section with the factory configuration is damaged, but we didn't do anything with him. What can you advise? Recovery disks did not create, but it is impossible, since there is no drive on the laptop.

Hi friends! In this article, I will show you how to roll back the Acer Aspire V5 laptop to the factory settings from the normally running Windows 8.1, as well as if it is not at all loading, you still learn how to create a recovery flash drive on the Acer Aspire V5 laptop. GB, since the disks will not work, there is no drive on the laptop.

My advice to all readers! It doesn't matter what manufacturer you bought a laptop, first of all find out in detail how the factory recovery program works, because during the work there may be anything, even the fact that the operating system will stop loading on the laptop. In this case, if you cannot restore Windows 8.1, 10, 10, you can simply roll back the laptop to the factory configuration, yes, all your installed programs will be deleted and you will have to set them again, but you will have Clean operating system, what it was at the time of buying a laptop.

But a nightmare, even for an experienced user, is the situation when a rollback program to factory settings is inoperable, what then to do? This case will be useful to recover or flash drives, but you need to create in advance, better immediately after purchasing a laptop. Read our separate article

All ways to restore factory settings onacer Aspire V5 Laptop

Consider the three most common situations:

1. The laptop is loaded normally, but it is unstable, cleaning the system and check for viruses of the result did not brought, in this case, you can run right in the operating system.

2. Windows 8.1, 10 not loaded, hidden sections on the laptop are not removed, rollback to the initial factory configurationAcer Recovery Management. normally functions.

3. Acer Recovery Management.

If your Acer laptop it is loaded normally, but the operating system is unstable, then you can copy all the important data on the disk (D :) and roll back to the laptop to the factory settings. How to do it!

Go to Metro Windows 8.1 interface

and click on the arrow

We choose the program Acer Recovery Management.

In the main program window, click on the Restore Settings button.

All your personal files and applications will be deleted. Further.

Do you want to delete files from all disks?

Click on the button Only the disk on which Windows is installed.

All information on the disk (D :) will remain untouched.

Click on the buttonJust delete my files

All personal files and applications will be removed from the computer.

Proceed

The process of recovery of factory settings begins with a duration of 15 to 30 minutes

Regional settings are set by default correctly. Further

We accept license terms.

Skip

Enter the name of the computer, such as Andrey-PK and click Next.

Use standard parameters.

We enter the username and click ready.

Loading and clean Windows 8.1 is loaded.

As agreed, information on the disk (D :) remained untouched.

Windows 8.1, 10 does not load, but hidden partitions on the laptop are not deleted and the program of rollback to the original factory configuration Acer Recovery Management is functioning normally

Click when loading the laptop F2 and enter BIOS, we go to the Main tab, see the parameter responding For switching on and disable the recovery function of the factory settings of the Acer laptop - D2D Recovery.It must be turned on, that is, it is set to Enabled.

Option F12 Boot Menu., which is responsible for the appearance of the boot menu while pressing the F12 key, must also be enabled (enabled).

click on the F10, by this we keep our changes to the BIOS and reboot

After rebooting, click at the same time by two keys Alt + F10 and we enter the program to roll back to the factory settings.

Diagnostics

Return to the source

All your personal files will be deleted.

Only disk. which installed Windows

Just delete my files

Returns a laptop at the initial state

Windows 8.1, 10 is not loaded, hidden partitions on a laptop are deleted or inoperable and you can not run the programAcer Recovery Management.

Connect the recovery flash drive to the laptop,

We reboot and immediately click the F12 key, we enter the laptop download menu, using the arrows on the keyboard, select our USB flash drive and click Enter, loading from the flash drive.

Your computer has several disks. Do you want to delete all files on all discs?

Only the disk on which the Windows system is installed.

Just delete my files

Starts rollback to the factory configuration

That's basically it!

Friends, if something is not clear to you, feel free to ask your questions in the comments, I will definitely answer.

How to return the Acer Aspire laptop factory settings, if the manufacturer's built-in recovery program, Acer Recovery Management does not work

Articles on this topic: