How to disable update 1C 8.3.

To ensure the integrity and consistency of data during the backup and updating of the configuration, all users with an information base must be completed.

Auto-update

On the example of the company's accounting, the editors 3.0.

For the ability to automatically update a typical configuration, you must:

○ The presence of an existing ITS subscription (for basic versions, the presence of ITS subscription is not required) (see the instruction "")

○ Availability of login and password to access the portal http://portal.1c.ru/ (or https://users.v8.1c.ru/) (see instruction "")

○ The software product must be registered in the user's personal account on the information technological support of the company "1C" Portal.1C.ru (information also in. Instructions "How to access updates")

1. First you need to open the desired database in the mode "1C: Enterprise". (Fig. 1)

fig. one

2. Select Administration - Internet support for users (Fig.2)

fig. 2.

3. The Internet Support Window opens. If earlier support is not completed, then click the "Connect" button (Fig. 3).

In the window that opens, specify your username and password to access the portal 1C https://portal.1c.ru/ (see the instruction "How to access updates") and click the "Login" button. Access to these sites have only registered users of the system programs. 1C: Enterprisehaving an existing subscription to ITS (for basic versions of ITS subscription required)

fig. 3.

4. After that, click "Upgrading the version of the program" (Fig. 4)

fig. four

Here you can also choose one of the three ways to verify updates on the 1C site:

● Disabled (in this case, the update check will not be checked, suitable in case manual installation of updates is planned)

● When starting the program (checking updates on 1C will be performed each time you start the program).

● on a specified schedule (you need to set the schedule for checking the availability of updates on the 1C site).

5. Click on "Update Program"

If the user site has an available update, the system reports the version number, a brief description, the update size and suggests it. (Fig. 5)

fig. five

6. You can select "Install the update right now" or "Remind when the work is completed" (Fig. 6).

fig. 6.

Note.

Before the update, you must complete the operation of users connected to the information base (including the configurator operation). If the system detects working users in 1C mode: an enterprise or configurator, a message appears on the impossibility of continuing and the need to complete the work (Fig. 7).

fig. 7.

After clicking on the button " Further»The program establishes a connection to the 1C technical support site using the specified user code and password, and receives the update file locally to the computer. Obtaining the update file from a user site can take a long time, depending on the size of a specific update file and connecting to the Internet.

8. If you plan to install an update right now, then be sure to "create a temporary backup of the IB and perform a rollback with an abnormal situation" (Fig. 8).

fig. eight

9. In the window that opens, you can select a backup method (save in a temporary folder, specify the directory to which you want to save the archive copy or not at all create an archive copy).

10. After saving the backup, click the Next button in the previous window.

The process of installing updates will be launched, which, depending on the performance of the computer and the size of the information base, can take a fairly long time (usually 15-45 minutes). (Fig. 9). Do not turn off the computer power until the process is completed.

fig. nine

11. After completing the 1C configuration update: the company will appear about the successful completion of the update. Click Finish. (Fig. 10)

fig. 10

The program will be automatically restarted and a description of the changes to the installed update will appear.

Through configurator

In order to update through the configurator, you must first download the update template.

For this you need:

2. Go to the "Services" tab and select "1C: Update programs" (Figure 2.1)

figure 2.2.

4. Press the configuration name you want to update

5. On the page you will see a list of releases (Fig. 2.3). The "Update version" column has written a list of configurations from which this update is available.

6. Click on the version we need

figure 2.3.

7. On this page, you must click on the "Update Distribution" (Fig. 2.4), then to "Download Distribution". After that, you need to save the file and wait for the end of its download.

figure 2.4.

8. After downloading, you must unpack the archive.

9. Run setup.exe

11 In the next step, you must specify the path to the template catalog (Fig. 2.5)

figure 2.5

12. Wait to end the installation and click "Finish"

To install a template

1. Open the database in the configurator mode

2. Open configuration: Menu Configuration - open configuration (fig. 3.1. )

fig. 3.1.

3 .. Before upgrading you need to make a backup of the information base.

(see instruction "? (regulatory and manual)")

4. Go to the menu Configuration - Support - Configuration Update (fig. 3.2. )

figure 3.3.

27.04.2016

Procedure for setting up automatic update of the standard configuration of the 1C system: Enterprise

Please note that the update of typical configurations located in the cloud service 1c: Fresh is made automatically by the specialists of the company itself 1C and does not require any additional actions from users. The cost of accessing the cloud version is already included update and in most cases at cost is cheaper than the ITS subscription.

In most standard configurations of the 1C system: Enterprise 8 laid the ability to automatically update configurations via the Internet.

Before setting up an automatic update system, pay attention to the following points:

We need broadband Internet access.
For the ability to automatically update a typical configuration, it is necessary to perform the following conditions:

The presence of an existing ITS subscription (for basic versions, the presence of ITS subscription is not necessary).
The presence of a username and password for access to the portal http://portal.1c.ru/ (or https://users.v8.1c.ru/).
Instructions for registering users on a single portal of information and technological support of the company "1C" Portal.1c.ru
The software product must be registered in the Personal Office of the user on the information technology support portal of the company "1C" Portal.1c.ru
Instructions for registering software products in the personal account of the single portal of information and technological support of the company "1C" Portal.1c.ru

Automatic update is intended for a sequential update from one release to the next one (in some cases there is a pass of one or two releases) within the same edition (the transition from one edition to another is not supported). If several updates were missed, then manual installation of intermediate releases may be needed. Read more to read the order of updating type configurations 1C: Enterprise 8 in manual mode can be.
Auto update technology is designed to update only typical configurations, i.e. Configurations in which no changes and settings were made in configuration mode. Updating Changed Configurations Manually Manually Required Special Skills.
The automatic configuration update technology is not intended to update the platform. If you need to update the platform to go from one configuration release, then you must first manually execute this procedure.
In some cases, to connect to the Internet, you will need to additionally specify the username and password to access the proxy server. Detailed information about using the proxy server can be obtained from the administrator of your local network.
To ensure the integrity and consistency of data during the backup and updating of the configuration, all users with an information base must be completed. Also at this time, regulatory and background tasks should not be performed: to control the execution of tasks and their cancellation, it is necessary to use the processing of the "Console tasks" from the disk of the ITS; If there are tasks performed on a schedule, you must prohibit their execution during the configuration update time; When using a file version with an information base for this, you need to complete the operation of the program - task scheduler; In the client-server version of work, you should use the administration utility where you need to set the "Locking Rules Enabled" flag in the properties of the information base; If configurations configured configured to start the background tasks, you should prohibit their execution during the configuration time. After updating the configuration, task execution can be resolved again.

Thus, the use of an automatic update mechanism can be recommended to small organizations with a stable and high-speed Internet access channel and in which Program 1C: Enterprise 8 is used on a small number of computers:

first: the update starts automatically after it is placed on the technical support website "1C" and for the update procedure it is necessary to complete the work of all users, which is often unacceptable for large organizations;
secondly: the procedure may take long time depending on the speed of the Internet (by the time of the usual update procedure, you must add the time for downloading the update file to the Internet, which may be the size of several tens of MB);
thirdly: In some cases, when using multiple computers on the Internet, you will need to additionally specify the username and password to access the proxy server (information about using the proxy server should own the administrator of your local network).
fourthly: as a rule, the organization is more, the more often the individual configuration configurations occurs, not implemented in typical configurations - the automatic update technology is designed to update only typical configurations.

Configuring automatic configuration update via the Internet

The article uses illustrations for updating the update of the standard configuration "1C: enterprise accounting" edition 3.0, release 3.0.43.173, with a taxi interface.
Version 1C: Enterprise 8.3, Release 8.3.6.2125, see.

1. In the "Administration" menu, select "Internet Support Users".

2. The Internet Support Window opens. If previously supported support was executed, then click the "Connect" button.

3. In the window that opens, specify your username and password to access the portal 1c https://portal.1c.ru/ (or https://users.v8.1c.ru/) and click the "Login" button. Access to these sites have only registered users of the system programs. 1C: EnterpriseHaving a valid subscription to ITS (for basic versions, ITS subscription is not required).

If the Internet Support connection has been completed correctly, you will see the status "Internet Support for the user ...".

If you have previously already connected Internet support (for example, to work with the 1C service: counterpart or other 1C services), then go to the next item.

4. After that, click "Setting the program update via the Internet."

5. In the window that opens, you will need to once again specify your username and password to access the 1C portal, and you can also select one of the three ways to verify updates on the 1C website:

Disabled (in this case, the checking of the update will not be performed, suitable in case. If manual installation of updates is planned.
When you start the program (checking updates on the 1C website will be performed each time you start the program).
For a specified schedule (you need to set the schedule for checking the availability of updates on the 1C site).

If you want the system to remember the password and did not ask the next time with an automatic update, check the box. "Remember Password".

Click "OK".

In the example, the method of checking "when starting the program" is selected.

If on the 1C website there is an available update, then the next time you start the program, the automatic update system will check the presence of a more recent release on the 1C website and report that there is a more recent release (in Example 3.0.43.195).

6. If you click on this message, the update Activation window will open "A new version of the program" is available on which the version number will be displayed, the update size and the offer to install the update. Click "Next".

If the user site has an available update, the system reports the version number, a brief description, the update size and suggests it.

7. You can select "Install the update right now" or "Remind when the work is completed."

Note.
Before the update, you must complete the operation of users connected to the information base (including the configurator operation). If the system detects working users in 1C mode: the enterprise or configurator then a message appears on the impossibility of continuing and the need to complete the work.

8. If you plan to install an update right now, be sure to "create a temporary backup of IB and perform a rollback with an abnormal situation."

9. In the window that opens, you can select a backup method (save in a temporary folder, specify the directory to which you want to save the archive copy or not at all create an archive copy).

10. After saving the backup, click the Next button in the previous window.

The process of installing updates will be launched, which, depending on the performance of the computer and the size of the information base, can take a fairly long time (usually 15-45 minutes). Do not turn off the computer power until the process is completed.

11. After completing the 1C configuration update: the company will appear about the successful completion of the update. Click Finish.

The program will be automatically restarted and a description of the changes to the installed update will appear.

Carefully read the changes that were entered into the configuration. Perhaps there are procedures that additionally need to be done manually. If you have closed this window, then to open it again in the "Administration" section, click "Support and Maintenance"\u003e "Program Update Results".

Check these programs

Release configuration successfully updated from 3.0.43.173 to 3.0.43.195

Additional Information

A temporary backup copy of 1C database in Windows 10, 8, 7 by default is saved to the Catalog of the form C: \\ Users \\% User% \\ APPDATA \\ LOCAL \\ TEMP \\ 1CV8UPDATE.160427132115, where the numbers after the point mean: 16 - year, 04 - Month, 27 - day, 13 - hours, 21 - minutes, 15 - seconds. This directory saves a file with an archive copy of the database with the "* .1CD" and log file with the "* .txt" extension.
Records of operations and errors encountered during the update are entered into the information base registration log (type of update of the information base).
In the process of installing an update in a temporary folder of the Windows current user, a log file with the update records is created. (The contents of the log file is subsequently automatically added to the registration log.).
The result of updating the information database is recorded in Windows Event Log (Event Log).

If this information was useful for you, then Laika is an article in social networks and share a reference to your favorite forums))).

Company "Online" 2016,

Auto-update 1C, Automatic update 1C, how to update 1C 8.3, automatic update 1C 8.3, 1C Automatic configuration update, automatic update 1C Setup, automatic update of 1C clients, automatic update 1C 8.2, configure automatic update 1C, how to update 1C 8.4, automatic update 1C 8.3, automatic updating of 1c databases, automatic update 1C 8, automatic updating of the client 1C 8.3, automatic updating of the 1C 8.3 configuration, automatically updated configuration 1C 8.3, 1C 8.3 is not updated via the Internet, the base 1C 8.3 is updated, how to configure 1C updated Same, instructions for setting up 1C auto-update, how to set up automatic update 1C 8.3, automatic update 1C 8.3 Accounting, setting up automatic update 1C 8.3, Automatic update of a thin client 1C, Update instructions for 1c in automatic mode, automatic update of the 1c platform on the Key NTU, 1C does not update the configuration, with automatic update 1C where the archive is saved, configure the update 1C, setting the automatic update 1C 8.3, where the base 1C is saved with automatic update, setting up automatic update 1C complex 8, 1C configurations, automatic update 1C 8.3 through the Internet, the automatic configuration script 1C 8.3, how to update 1C automatic mode, update 1C 8.3, how to configure automatic update 1C, update 1C Accounting 8.3, how to update 1C yourself, setting up 1C auto update, how to update 1C 8.3 yourself how to update the configuration 1C, update the 1C configurator how to update the 1C, 1C accounting platform to update how to update 1C without a configurator, update 1C version, update the 1C 8.3 configuration, update 1C 8.3 via a configurator, update 1C for free, how to update the 1C 8.3 configurator 8.3, how to update 1C 8.2 Alone, how to upgrade 1c through inte Renet, update the 1C database, update the 1C program, how to update 1C 8.3 yourself via the configurator, update the releases 1C, how to update the 1C 8.3 platform yourself, how to update 1C 8, update 1C 3.0 in the background, update 1C via the Internet yourself, update 1C 8.3 Free, 1C Accounting 8.3 How to update, update 1C via the Internet for free, how to update 1c enterprise, how to update the base 1c, how to update 1C 8.4 how to update the 1C configuration how to update 1C 8. 3 independently via the Internet, update the 1C 8.4 configurator, update 1C 8.4 via the configurator, update 1C to the latest version, update version 1C 8.3, update 1C 8.3 yourself for free, how to update 1C 8.4 yourself via a configurator, 1C is not updated, not updated 1C 8.3, why 1C 8.4 is not updated, why 1c is updated, 1C Accounting is updated, 1C 8 is updated, the release of 1C is updated, how to configure 1C auto-update, 1C is not updated via the Internet, the 1C 8.3 configuration is not updated, 1C is updated automatically, why 1c is not updated automatically, Automatic update 1c does not start, how to start 1C auto-update, why 1C 8.3 is not updated in the background, the database configuration is not updated for a long time, update 1C is updated, 1C 8.2 Accounting is updated, 1C 8.4, 1C database configuration is not updated. 8.3 Automatically updated why 1C 8.3 Basic, 1C 8 is not updated configuration Iya, why 1c configuration 8.3 is not updated, 1C 8.4 is not updated via the Internet, 1C 8.4 8.3 is updated, why 1C 8.2 Basic is updated, 1C 8.3 What is updated, 1C 8.3 Basic, 1C BPA has not been updated. Platform 8.3 is not updated how much time is updated 1C 8.3 in automatic mode, 1C 8 is updated automatically

Tags: automatic updating of the configuration 1c, update 1C via the Internet, Internet update 1c, online update 1c, update 1C online, automatic update 1c, Auto-update 1C, Update 1C, how to update 1C via the Internet, update 1C 8

We made in the title article The question is relevant for many system administrators working with this product. As far as possible, we try to talk about the parameters affecting the performance of 1C and discharge popular myths. Today, on the example of one recent case, we want to tell you about another aspect that can seriously affect productivity - regulatory tasks.

Let's start with a real case. Not so long ago, one of our clients turned to us with a complaint about the "brake" 1c from one of his employees. The symptoms were expressed in the fact that after a certain time, the configuration of the TRADE control 10 began to slow down much, and simply hesitated for some time.

With a more detailed analysis of the situation, it turned out that it was only at one employee, and at any workplace, it happened for a long time, but if earlier "brakes" lasted about a second, now, after the update, they can last until 15-20 seconds that Makes the work extremely uncomfortable.

In principle, the source data is already enough to make the first conclusions. We give them again:

"Brakes" occur constantly, with certain periodicity
"Slows down" only one user
"Slows down" at any workplace

To confirm your guesses to look in Settings for accounting parameters:

Indeed, the "problem" user is specified as a user to perform regulatory tasks. As it turned out, once a long time ago, the assignment of Rib autobrame was working on behalf of this user. It remains to see what exactly was the cause of episodic "braking". It is also easy to do:

And here is the "Celebration Celebration" - setting the update of the full-text search index, which was launched once a 2.5 minutes. In this case, the problem was completely solved by turning off the execution of regulatory tasks under this user, but this is not always possible or appropriate, so below we will look at how you can manage the regulatory tasks and how to make sure that they do not have a negative impact on productivity.

Normal app

In configurations based on the usual application of a single toolkit to manage the regulatory tasks there. This is largely due to the fact that at the time of their initial development itself, the concept of regulatory tasks itself was developed rather weakly.

Managing many regulatory tasks is made through the setting of associated subsystems. For example, the settings of the regulatory tasks associated with the exchange of data should be sought in the exchange settings associated with the EGAIS in alcohol trade settings, etc.

At first glance, everything is quite logical, but the absence of a single tool makes it difficult to control the configured regulatory tasks and the optimality of their settings. Well, if the tasks are one - two, and if there are more of them or, as in our case, there is a suspicion of any of the regulatory tasks, but you do not have the idea who has been configured in this database.

In this case, you should use external processing Consolezdans (Jobsconsole), which is included in the set of standard treatments on the ITS disk. Processing provides a single interface for all tasks and allows them to perform their centralized setting, as well as control the task it runs at the current time.

This list must be carefully learned, all unnecessary tasks should be disabled, and in the necessary lead the schedule in line with urgent needs and common sense. For example, in our case, there is no need to handle the answers of the EGAIS every 30 seconds (this setting is made for testing) and in working mode it will be enough enough to do it once in half an hour.

Controlled application

In configurations based on a managed application, a more significant role is assigned to regulatory assignments, with their help various tasks for servicing the information base and maintain it in the current state, but at the same time it is precisely the regulatory tasks most often become the cause of "brakes".

To manage regulatory tasks, a hotel item is intended in the menu Administration - Support and maintenance.

It can be immediately noted that the tasks were significantly added (for example, we took the same configuration - retail) and their competent setting is capable of significantly improve the performance of the information base. The default settings are made on the basis of the needs of the middle spherical company in vacuum and are not optimal even close.

First of all, turn off what is clearly unnecessary, with which you do not work. Then we optimize the schedule of rarely used functions, let's say the update of the classifier of banks in retail, as well as the control of counterparties, can be carried out once a week in hours or at the end of the working day.

Separate attention should be paid to everything that is associated with the search index. Full-text search is definitely a comfortable thing, but work with its index is a very and very resource-intensive task. Therefore, you should not fall into extreme and abandon it, but you should seriously revise and configure its parameters.

Let's start by S. extract textThis operation allows you to search on the contents of the applied files, so if you do not use them, do not search for them, or you have some images there, then this operation can be disabled, in any case, to perform it in 85 seconds - explicit brute force.

Update index PPD - One of the most resource-intensive operations, defaults once per minute.

And now we think how often in the database is added or information on which you most often search are added? Not clearly every minute, so it will be enough to update the index much less frequently: once an hour, once a day or in general once a week.

Also applies to merging Index PPDIf you update the index once a day, you should configure the merge to execute once a week, while choosing the least interfering time as the start of the task.

These simple operations will allow you without particular damage to the configuration functionality to raise the comfort of working with it to a new level due to the failure of the frequent execution of sufficiently resource-intensive operations. Just do not fall in extremes, competently judge how you need certain opportunities and how often the associated tasks should be performed.

Tags:

Please Enable JavaScript to View The

The company 1C is constantly published by new releases of its configurations: adds new features, updates reporting forms.

Therefore, the configuration of your information bases is also constantly updated. Program 1C Even herself reminds of this and offers to update. Update 1C 8.3 You can independently in two ways: via a configurator or via the Internet. Consider the step-by-step instructions for updating 1C and what needs to be done after this procedure on the example.

Update program 1C 8 via the Internet

To update 1C 8.3 via the Internet, go to the "Administration" menu and find the Software Update section:

First go to the "Configuring program update" section:

In this window, the most important thing is to enter the user code and password, without them it will not be connected to the site with updates. You should have got them together with. If for any reason you have no reason, there is a link next to which you will go to your personal account on the support site, and there will be all the data.

Here you can disable automatic update check, configure the schedule check or each time you enter the program.

We leave the switch on the "automatic update" and click "Next". If a newer release release is found than the current, the appropriate information will appear.

For my configuration there was a newer version, and now I will try to update. Pay attention to the size of the update, as it is downloaded and unpackled into the user directory, which is on the "C:" disk. Accordingly, it should be enough free space. By the way, here you can read what changes and innovations in the update. Click "Next".

Oddly enough, the program could not connect the first time to its server due to the fact that my old code and password used, although in the settings I pointed it all right:

I click "OK", I enter the right data and click "Next". I hope you will not appear this window.

The program will start receiving a file with updates. Depending on the speed of the Internet, it may be a rather long process. I took a few minutes. In the next window, we have to choose, update immediately or at the end of work. If you decide to update immediately, make sure that no one is in the database. The update occurs in the monopoly mode.

Get 267 video tutorials for 1C for free:

It will also be prompted to make a backup before upgrading. I advice Before Make a backup of the 1C database, made sure that owns its own experience. Moreover, I recommend choosing the last item "Create a backup with saving to the directory". In this case, if something goes wrong when updating, the program will return everything in place.

My update passed without problems and took about 45 minutes.

Important remark! After installing the configuration update, the program may require update the 1C platform. How to do it, you can read in or see in our video:

Self-update 1C 8.3 via configurator

To update through the configurator, you first need to download the update file 1C from the official website or from the ITS disk. How to do it, I described in the article "". Only a string in the table, of course, you need to choose another (1C Accounting):

It should be noted one point. Not all the latest release versions can approach your current configuration. Therefore, if you have not been updated for a long time, you may have to download several versions. In the list of releases it can be seen which to which suits.

In my case, the last release of 1C is suitable, and I downloaded it. Unlike a platform update file, configuration updates are in archives. It is also desirable to put it in a clean directory and run. After it is unpacking, run the setup.exe file:

It will be set to install update to the specified directory. As a rule, this is a default directory, but you can specify the other.

Now go to the configurator:

Naturally, it is necessary to enter the user with administrative rights.

Immediately make a backup!

Now you need to go to the "Configuration - Support - Configuration - Update" menu. A window will appear:

If one or more configuration updates are found 1C 8.3, a window appears with a choice of desired:

If several available updates have been found, the program will last with bold font.

Press "ready." Two more information windows will appear, they just need to click "continue."

The update process will begin. After some time, the configuration comparison window may appear. If you are not a specialist, then it's better to touch anything there. Click "Run":

After some time, the message "Configuration Completed" will appear. Click "OK".

Now you also need to update the configuration of the information base. To do this, go to the "Configuration - update the database configuration".

If the system asks something else, you need to press "yes" or "take".

At the end, the configurator can be closed. When you first start the program in normal mode, a message may be released that the used platform is outdated for this configuration and the system is not recommended.

This is completed on this.

See also our video update 1C through the configurator: