Email codes email. Fixing the error "Server refused access via POP3" when connecting Gmail mail! Problems that often arise when collecting letters from Gmail boxes and their solution

Common Errors / Errors WinSock / Errors SMTP / Errors POP3 Protocol Version 3 / Errors NNTP / Remote Access Services Errors / Error IMAP Protocol

Common mistakes

0x800CCC00 Load_Sicily_failed. Authentication is not loaded

Try close and restart Outlook Express
If you still receive the same error, wait 20-30 minutes for the account reset server and try again
It may be damage to the account in Outlook Express. Try setting the second account and see if it works

0x800CCC01 invalid_cert_cn. Invalid contents of the certificate

0x800CCC02 invalid_cert_date. Invalid date certificate

Get a new certificate reprinted on your AUTHORITY SERVER

0x800CCC03 ALREADY_CONNECTED The user is already connected

You can log in on another machine.
Close all connections on all machines, wait 20-30 minutes and try again.
Some mail servers will not recognize inappropriate shutdown. This will lead to the account of being poplocked. Either wait 20-30 minutes to the time-out or ask someone to stop the task of receiving the mail that is performed by your account. It can normally be done only with accounts that UNIX shells

0x800CCC04 CONN.

0x800CCC05 Not_Connected. No connection to the server

You can't get a web page? If so, then perhaps the wrong mail server, entered in the account settings or the server may not be available
If you can't get a web page, interrupt the connection and try to connect again
Restart the computer and try again
If it still does not work, and you do not get any web pages, the data can be transmitted via the network properly. Check DNS settings, delete and reinstall TCP / IP in Control Panel\u003e Network (CONTROL PANEL\u003e NETWORK).
You can try to delete a DNS cache with the IPConfig / Flushdns command (Start -\u003e All Programs -\u003e Standard -\u003e

0x800CCC06 CONN_SEND.

0x800CCC07 Would_Block.

0x800CCC08 INVALID_STATE.

0x800CCC09 CONN_RECV.

0x800CCC0A Incomplete The message is not fully loaded

0x800CCC0B Busy. Server or message delivery service busy

Try to get actions to get / send by e-mail about once every 5 minutes. In addition, inform the support service to make sure that the server did not fall.
You can log in on another machine. Close all connections on all machines, wait 20-30 minutes and try again.
Some mail servers will not recognize inappropriate shutdown. This will lead to the account of being "poplocked. Either wait 20-30 minutes so that the action is over on a timeout, or ask someone to interrupt the task for your account with the mail server. This can be done only with UNIX accounts.
If you have not yet logged in another computer, someone can use your account, or something wrong with your account

0x800CCC0C not_init.

0x800CCC0D Cant_Find_Host. Unable to detect the server

This error may appear if you have an option 'Notify me if there are any new news groups' selected, but do not have the created news account. Go to Tools\u003e Observer Properties\u003e General Tab (Tools\u003e Options\u003e
If the norton antivirus is installed, then the problem is possible in it.
If it still does not work, and you do not get any web pages, the data can be transmitted via the network properly. Check DNS settings, delete and reinstall TCP / IP in Control Panel\u003e Network (CONTROL PANEL\u003e NETWORK).
You can try to delete the DNS cache with the IPConfig / Flushdns command (Start -\u003e All Programs -\u003e Standard -\u003e Command Line. Will behave in the IPConfig / FlushDNS command prompt)

0x800ccc0e failed_to_connect. Unable to connect to the server

This error may appear if you have an option 'Notify me if there are any new news groups' selected, but do not have the created news account. Go to the Tools\u003e Observer Properties\u003e Common Tab (Tab\u003e Options\u003e General Tab) and disable this option.
If Norton Antivirus is installed, then the problem is possible in it.
Can you open web pages? If so, then you can simply incorrectly entered the email server address to your account or the server it is now possible to be unavailable.
If you can not open web pages, tear the Internet connection and try to connect again
Restart the computer and try again.
If it still does not work, and you do not get any web pages, the data can be transmitted via the network properly. Check DNS settings, delete and reinstall TCP / IP in Control Panel\u003e Network (CONTROL PANEL\u003e NETWORK).
You can try to delete the DNS cache with the IPConfig / Flushdns command (Start -\u003e All Programs -\u003e Standard -\u003e Command Line. Will behave in the IPConfig / FlushDNS command prompt)

0x800CCC0F Connection_Dropped. Connection closed (cm KB 813514)

The modem or network cable has been disabled.
If this happens often, try updating the modem drivers or add the initialization string.
Possible cause can be "too noisy" line.

0x800CCC10 invalid_address Unknown address on server

Check spelling in the field to (to someone): Delete old messages from the Outbox folder, and then try again.

0x800CCC11 Invalid_Address_List. Unknown mailing list on server

Check the address list and try again.
Contact your administrator (if any) to see if you have the right access to the list from the terminal you use.
Check the address that you wrote in the "To" field (you may have entered the address wrong).

0x800CCC12 Socket_Read_error. Can't send a request WinSock

Delete TCP / IP protocol and reinstall it. In Windows, configure is done through Start -\u003e Control Panel -\u003e
This very often happens if your computer is infected with any virus. Check!
You can "reset" WINSOCK by the Netsh WinSock Reset command (entered on the command prompt). All network connections when performing it will be broken.

0x800CCC13 Socket_Write_error. Can not read Winsock's answer

This error sometimes occurs when you try to upload email messages with nested files. Having programs such as Netnanny can cause such an error. Disconnect the program - may it help to eliminate the error.
Delete TCP / IP protocol and reinstall it. In Windows, configure is done through Start -\u003e Control Panel -\u003e Network. Note: You may need your Windows CD to perform this task!

0x800CCC14 socket_init_error Unable to initialize WinSock

Delete TCP / IP protocol and reinstall it. In Windows, configure is done through Start -\u003e Control Panel -\u003e Network. Note: You may need your Windows CD to perform this task!

0x800CCC15 Socket_Connect_ERROR. Unable to open Windows Socket

Delete TCP / IP protocol and reinstall it. In Windows, configure is done through Start -\u003e Control Panel -\u003e Network. Note: You may need your Windows CD to perform this task!

0x800CCC16 INVALID_ACCOUNT. Not identified user account

Check the correctness of the writing of the account name and re-enter the password

0x800CCC17 USER_CANCEL The user canceled the operation

You have pressed the cancel button.
You cannot receive mail, with a missing postal header, as it does not match RFC. You may have a damaged or very large attachment file on the mail server.
If you click "Cancel," because this operation takes a lot of time, the POP3UIDL file may be damaged. Close the Internet connection, and all other programs. Find and delete the POP3UIDL file. Try again.
If the same error, you will repeat step 3 and re-boot before trying to check mail again.

0x800CCC18 sicily_logon_failed. Attempt to enter the system unsuccessful

Check the account data, making sure that the password / username is not sensitive to the register. Restart your computer and try to connect.
Create a separate person and see if it is at the entrance to the system from this identity with the same information.
Make sure the account is still active.

0x800CCC19 Timeout.

This is possible caused by damage to the POP3UIDL file. Close Internet access and all open programs. Locate the file "POP3UIDL and delete it. Re-try to connect: It may be all started.
Repeat step 1 with a reboot before checking mail again
You may have a damage to an account or a very large attachment file on the mail server. Large file attachments, mail or which lack headers or do not match RFCs can cause this error.
Do you really have an Internet connection? Are you sure?

0x800CCC1A Secure_Connect_Failed. Unable to connect using Secure Sockets Layer (SSL)

Your provider does not need an SSL connection. Turn off the SSL in the email of the account properties and try again.

Winsock errors
0x800CCC40 WINSOCK_WSASYSNOTREDY. Using the subsystem of the network is impossible

0x800CCC41 WINSOCK_WSAURNOTSUPPORTED Windows Sockets does not support this application

0x800CCC42 WINSOCK_WSAEPROCLIM.

0x800CCC43 WINSOCK_WSAEFAULT. Wrong address

0x800CCC44 WINSOCK_FAILED_WSASTARTUP. Unable to download Windows Sockets

0x800CCC45 WINSOCK_WSAEINPROGRESS. Operation is performed. This error occurs when you call Windows Sockets API during the execution of the lock function

SMTP Protocol Errors

0x800CCC60 SMTP_RESPONSE_ERROR. Invalid answer

0x800CCC61 SMTP_UNKNOWN_RESPONSE_CODE. Unknown error code

0x800CCC62 SMTP_500_SYNTAX_500_SYNTAX_ERROR. Error syntax

0x800CCC63 SMTP_501_PARAM_SYNTAX Incorrect syntax parameter

The command is not executed

0x800CCC65 SMTP_503_COMMAND_SEQ. Invalid team sequence

0x800CCC66 SMTP_504_COMMAND_PARAM_NOTIMPL. The command is not executed

0x800CCC64 SMTP_502_COMMAND_NOTIMPL The command is not available

0x800CCC68 SMTP_450_MailBox_Busy. Mailbox blocked and busy

0x800CCC69 SMTP_550_Mailbox_not_Found Mailbox not found

Mailbox not found. Most likely the error in the sender's address and / or account is deleted on the server.

0x800CCC6A SMTP_451_ERROR_PROcessing Error processing request

0x800CCC6B SMTP_551_USER_NOT_LOCAL User mailbox is known, but it is not on this server

0x800CCC6C SMTP_452_NO_SYSTEM_STORAGE No free post storage

Mailbox limit exhausted. You need to contact the system administrator describing this problem.

0x800CCC6D SMTP_552_STORAGE_OVERFLOW. Exceeded storage limit

In the repository, where the mailbox is located free space. Contact the system administrator.

0x800CCC6E SMTP_553_Mailbox_name_Syntax Invalid Mailbox name syntax

0x800CCC6F SMTP_554_TRANSAct_Failed. Failed to perform a transaction

0x800CCC78 SMTP_REJECTED_SENDER. Unknown sender.

This is caused by an incorrect address in the 'answer' field.

0x800CCC79 SMTP_REJECTED_Recipients The server rejected the recipients

0x800CCC7A SMTP_NO_Sender. Not specified sender address

In the "From whom" field is not specified by the sender.

0x800CCC7B SMTP_NO_Recipients Not listed recipients

In the "To" field, the recipients are not specified.

Errors protocol POP3 version 3

0x800420CB POP3_NO_Store. Mail cannot be stored on the server

0x800CCC90 POP3_RESPONSE_ERROR. Invalid customer response

0x800CCC91 POP3_INVALID_USER_NAME. Invalid username or user not found

0x800CCC92 POP3_INVALID_PASSWORD. Invalid password for account

0x800CCC93 POP3_PARSE_Failure. Could not interpret answer

0x800CCC94 POP3_NEED_STAT. Requires the STAT command

0x800CCC95 POP3_NO_MESSAs. No messages on the server

0x800CCC97 POP3_Popid_out_of_range. The message code is outside the range

Httpmail errors

0x800CCC31 Incorrect query configuration or incorrectly formed request

NNTP Protocol Errors

0x800ccca0 nntp_response_error News Server Response Error

0x800Ccca1 nntp_newgroups_failed. Unable to access the newsgroup

0x800CCCA2 NNTP_LIST_FAILED The LIST command for server is not executed

0x800CCCA3 NNTP_ListGroup_failed. Could not display the list

0x800CCCA4 NNTP_Group_failed. Unable to open a group

0x800CCCA5 NNTP_Group_Notfound No group on server

0x800CCCA6 NNTP_Article_Failed. No message on server

0x800CCCA7 NNTP_Head_failed. Not found Post subject

0x800CCCA8 NNTP_BODY_FAILED No body message found

0x800CCCA9 NNTP_POST_FAILED Unable to send to the server

0x800Cccaa NNTP_NEXT_FAILED Unable to open the following message

0x800cccab nntp_date_failed. Unable to display data

0x800cccac NNTP_Headers_failed. Could not display headers

0x800cccad nntp_xhdr_failed. Unable to display MIME headers

0x800cccae nntp_invalid_userpass. Invalid password of the user

RAS Remote Access Services Errors

0x800cccc2 ras_not_installed RAS / DUN is not installed

0x800cccc3 ras_procs_not_found RAS / DUN process is not found

0x800CCCC4 RAS_ERROR. RAS / DUN error returned

0x800CCCC5 RAS_INVALID_CONNECTOID Connection is impaired or missing

0x800CCCC6 RAS_GET_Dial_params. Error when receiving set parameters

Errors protocol IMAP

0x800cccd1 imap_loginfailure. Unable to log in

0x800ccd2 imap_tagged_no_response Message noted

An error occurs when you are trying to get messages from the POP3 server.

0x800cccd3 imap_bad_response Invalid response to the request

0x800ccd4 imap_svr_syntaxerr. Error syntax

0x800CCCD5 IMAP_NOTIMAPSERVER. The server is not imap

0x800CCCD6 imap_buffer_overflow. The buffer limit exceeded

0x800CCCD7 imap_recvr_error Error recovery

0x800cccd8 imap_incomplete_line Incomplete data

0x800CCCD9 imap_connection_refused Connection is prohibited

0x800cccda imap_unrecognized_resp. Unknown answer

0x800cccdb imap_changeduid Changed user code

0x800CCCDC IMAP_UIDORDER The user code command is not executed

0x800cccdd imap_unsolicited_bye. Emergency connection break

0x800cccde imap_improper_svrstate. Invalid server status

0x800ccdf imap_auth_not_possible Unable to authorize the client

0x800CCCE0 imap_out_of_auth_methods. No longer types of authentication

Solving problems for all the above error codes are wanted. If you know the decision - help other people. Leave your way in the comments.

No similar posts ...

Talking in their articles about the collection of mail, remembered the nuances of the collection from the Gmail postal service. The fact is that it is with this postal service that problems occur during the post office. All because of its powerful security, which sometimes reaches the level of the maratism :) I, of course, only for the high security of any services, but in the case of Gmail it sometimes moves all borders. For example, try to collect mail from your Gmail box, and the process does not go, because Google blocks the connection attempt without any particular reasons. I collided several times with a similar problem, I decided to write about the causes of the occurrence, possible problems of the problem and how to solve it.

Problems that often arise when collecting letters from Gmail boxes and their solution

When collecting letters from any Gmail boxes, very often users encounter a mistake "The server refused to access the POP3 protocol for this username and password".

We will analyze 2 basic problems below, because of which a similar error may occur and how to fix them.

Of course, such an error may occur because of the wrong login and password from the second mail. Whatever it was trite, make sure that you correctly enter this data correctly!

Problem number 1. No access via POP3 in the plug-in Gmail

Before digging in the direction of security, you need to make sure that you include access via the POP protocol in your connected drawer.

To check whether access via POP is enabled, go to mail settings (button in the form of the gear) and on the "Shipping and POP / IMAP" tab, in the "Access POP" section of the POP item for all letters.

If this feature is not turned on there, you can't connect the box! If access via the POP protocol is included, then we look further ...

Problem number 2. Block access to the connected mail for Google security reasons

As a rule, access to the connected mail can be blocked due to a suspicious location, whence the input of the second mail is running and (or) due to a suspicious application, where the input is running. It would be clear if this system would work always correctly. But it often happens that access is blocked and an access lock comes to the plug-in, while some strange location (for example, New York) is indicated and reported an unsafe application. Example letter:

And this is despite that the entrance to the second box is performed accurately from the same computer as in the main, the location is one (obviously not the USA) and at the same time, no matter what application, the more unsafe speech can be :). Google can be lost 100% in the location, as well as what you are trying to enter the mail through some application.

Several times came across a similar problem and in all cases the location was defined incorrectly and on the computer did not have any programs at all replacing someone's IP address that could change the location.

Decision

First of all, if access to the connected mail is blocked, you need:

Conclusion

These are the nuances that can be when setting up a mail collection from Gmail boxes. The harvesting process itself is simple, there are no complex settings, as in any other services, but the safety of frequent "shalit", the face passes and causes inconvenience. I hope the information from this article will help someone.

Good day, colleagues! Today I tried to configure sending messages from 1C and encountered the problem of sending messages. As it turned out, everything rested in the settings. Well, let's all in order.

Setting up an email account

To make the mail goes you need to configure the main account. To do this, go:

Administer | Organizer | Configuring Email System Record

In the "Organizer" panel, do not forget to check the mail client check box to use the capabilities of the email client program for interactions using emails (e-mail).

Bookmark "Sending letters"

Errors that may appear after setting up mail

At first there was such a mistake:

Checking an account settings ended with errors: Error sending a message: An error occurred when working with SMTP. Error code: 535. Server response: 5.7.8 USERNAME AND PASSWORD NOT ACCEPTED.

Watched on the forums, changed the settings in 1C did not help anything and the other comes:

Error sending a message: An error occurred when working with SMTP. Error code 534. Server response: 5.7.14 Error access to the incoming message server. An error occurred when working with POP3: error code 6. Server response: Web Login Required.

Fixing errors after setting

Initially, the articles show a screenshot for troubleshooting associated with the entrance to the Gmail account. It is emphasized by the link that leads to the page where you can enable unverified applications. This link is: https://www.google.com/settings/security/lesssecureapps. Overcoming it, you will see the same page as in the screenshot below:

Resolution of unverified applications Access to your account

I hope this article will help you solve the problem with setting up mail in 1C 8.