1C 8.1 does not start on Windows 10. Correct the error "Sorting order installed for the database differs from the system!" If such an error takes place when you start "1C: Enterprise"

With the advent of the new tenth version of the operating system, many are interested in how to set 1C on Windows 10. Although many users have already appreciated the functionality and convenience of the new system, 1C software users: the company has noticed the fact that programs from 1C create many errors when working on the tenth Winduse. Despite all positive quality, Windows 10 is a frankly raw and unfinished system. Specialized software, such as 1C: Accounting, works on this system with failures.

Windows 10 can be installed in two ways:

• Updated with 7 or 8 version of Windows;
• Install the version of the system "from scratch".

Regardless of the method of implementation during operation with 1C 7.7 and other versions there are certain problems. Therefore, if you decide that the cause of the problems of incorrect installation is incorrect output.

Failures when working with 1C on Windows 10

One of the most common mistakes that occur when working with programs from 1C version 8.3 and others on the tenth windows are departures up to the point that the program writes "the program's work" stopped. It is noted that after installing 1C: the enterprise on the absolutely empty Windows program is practically not functioning, and when installed on the updated to 10 version 7ku - it starts, but a lot of minor errors will be done, which interfere with normal operation.

Some versions work on 10 windows better, some worse. Therefore, if you have the opportunity, it is better to test your version of software for compatibility with the tenth windows and only after that hold an update.

The most common mistakes that may occur when working with 1C to Windows 10:

• Indexing errors;
• Encoding problems;
• Lack of logical integrity check;
• DLL operation failures;
• OpenConf errors, etc.

If you are unable to solve all problems yourself, you should seek help in a specialized company. Experienced programmers, engineers and customizers will quickly fix all violations and failures in the system.

Installation order version 8.3

If you still decided to install 1C on the tenth version of Windows, the installation process itself will be a little different from a similar installation by 8 x64. First of all, you need a package to install 1C software. It can be purchased as a disk with software or download from a special site.

The resulting archive should be unpaired - it is usually unpackled independently, but any archived programs can also be used. After that, in the folder in which you placed unpacked files, locate the installation file and run it. By running the installer, you will need to click the "Next" button and start the installation process.

On the new page, the installer will prompt you to choose a couple of suitable system elements that you want to install. You can choose all or just some of the listed:

• 1C: Enterprise;
• File version, or thick client;
• Subtle client;
• Server;
• Expansion modules for server;
• Translation programs for different languages;
• Server administration;
• Server for storing all important configuration elements;
• Converter.

Selecting all the files to be implemented, click on the Next button again. On the next page you will need to choose a language on which the product will be started. Press the "Next" button again.

Transfer 1C with Windows 7 to 10

If you have selected the server in the installation components, you will have an additional screen to select the server settings. After all the settings are selected, you will be left to "install".

After the installation is completed, the program will give you a choice to install a protective driver. If you are going to get the keys to the program by emulator, you do not need to install this driver. This is completed on this installation process, you can hang the process and restart the computer.

The most rational way to get the stable operation of the 1C software on the tenth windows is to transfer from Windows 7. This is not such a complex process, which it seems. The first thing you need to do is copy all the databases for removable media, disk or flash card. Subsequently need to be transferred to the computer after reinstalling. The location of the base can be found when starting the program.

After that, deal with the transfer of the platform itself. Go to the hard disk on which you have a program. Usually this is a C drive. There find the Program Files folder and copy to the removable media and it.

You can now update the system to Windows 10. When the process is completed, and you will receive a computer from a new OS, you can take the transfer of 1C back to your computer.

How to implement 1C 7.7 when transferring?

First copy to the database PC. Do not forget to remember the exact way where you copied them. After that, go to the disk with the Program Files folder and copy the 1CV77 folder stored earlier. In this folder, find the nested bin. Love the 1cv7l.exe file in it, create its label on the desktop and run.

When opening the program it will be empty. To find the databases, click "Add" and go to the place to which you put the database. Code will find the desired folder, click OK. After that, you need to run 1C 7.7 to the configurator mode. In the "Administration", find the IB Table Page Page and select "+ Current System Installation". Confirm the action and wait a bit. The program will start as usual and will work as high quality as possible.

Working with such a fresh system, like Windows 10, is fraught with problems. To install 1C and use it much more difficult to use it than on Windows 2000. If you are not ready to face such problems, do not rush to go to Windows 10 and wait until all the problems are eliminated.

How to install 1c enterprise 8.3? This question is tormented by many newcomers, in fact it is much easier than could seem to you! For this, it is not necessary to be at all. In this step-by-step instruction, I will tell the process of installing the program 1C 8.3 and how to set the 1C configuration using the example of "1C enterprise accounting 8" with the Windows operating system. The procedure is absolutely similar to other applications, such as 1C Trade Management.

By the way, if you have not bought 1C, you can order any 1C program and customization services. Delivery and installation of 1C profs in Moscow and regions for free!

Installation can be divided into 2 small steps:

1. First of all, installing the 1C 8 platform itself and
2. Installing the configuration: Configurations 1 with a lot, and consider the installation of all is not possible. For example, I take the most popular configuration - 1C company accounting.

Get 267 video tutorials for 1C for free:

As a rule, configuration files are packed in an archive in which the installation files. It looks like this:

In the archive you need to find and run the file "setup.exe".

This window will appear:

Here it is necessary for the first three items, as in the picture, set the parameter "This component will be installed on a hard disk." Also in the interface languages \u200b\u200bmenu, you can specify the need for you (the default is Russian / English).

Installation 1C: Enterprise 7.7 on x64 Bit Windows associated with some difficulties. The fact is that installing 1C through the usual installer will not work, even if you run a program in compatibility mode. But there is nothing impossible in our life. Therefore, the following is a step-by-step instruction for installing 1C: Enterprise on X64 Bit Windows, in my case it is Windows 10.

1. Installation in Windows X32

First you need to install the necessary 1c platform: Enterprise to any other 32-x (x86) Windows Bit System By changing the default installation path to " C: \\ Program Files (x86) \\ 1cv77 \\"(In order for all labels). Then you need to copy the files in the 64th bit system:

1. Directory " 1CV77.»From the way

   « C: \\ Program Files (x86) \\»32-bit system in

   « C: \\ Program Files (x86) \\»64 digit system.

2. Directory " 1c Enterprise 7.7.»From the way

   « C: \\ Documents and Settings \\ All Users \\ Main menu \\ Programs»

   in the 32-bit system in

   « C: \\ PROGRAMDATA \\ Microsoft \\ Windows \\ Start Menu \\ Programs»

   64-bit system

   (ways may vary, depending on the versions of Windows).

3. Copy the file from the way

   « C: \\ Windows \\ System32 \\»32-bit system in

   « C: \\ Windows \\ syswow64 \\»64-bit operating system.

1. DisconnectionDEP.for process 1cv7.exe (for server OS)

Next, it is necessary to exclude the 1cv7.exe process from the DEP verification, for this we go into the properties of the system (" Start» - « Control Panel» - « system and safety» - « System") And choose" Additional system parameters» .

In the window that opens " Properties of the system»Go to the tab" Additionally"And go to" Parameters»Performance.

Next, go to the tab " Preventing data", Press the button" Add"And choose the file" C: \\ Program Files (x86) \\ 1cv77 \\ bin \\ 1cv7s.exe", Which we copied in step 1.

1. Installation of protection drivers

Now you need to install the security drivers. 1C: The company uses HASP Hardware Software Software from Aladdin Knowledge Systems Ltd. To start all the protection modules you need:

Fix a mistake "The sorting order installed for the database is different from the system!" If such an error takes place when you start "1C: Enterprise".

1. Launch 1C: Enterprise

All, on this installation of the 1C platform: the company is completed. To start, you can use the label on the way " Start» - « All programs» - « 1C Enterprise 7.7.» - « 1C Enterprise" You can also add a shortcut to run 1C to the desktop for all users by copying it to " C: \\ Users \\ Public \\ Desktop"(Ways may vary, depending on the Windows versions used). Further work with the 1C system is similar to work in 32-bit Windows.

We often ask the question of whether 1C 7.7 will work on a new computer and how to transfer it there. Everything is not as difficult as it seems. First, copy to the removable medium of the 1C 7.7 base, which must be transferred to the new computer. Ways to databases can be found when launched 1C 7.7 label.

We launch a new computer and copy the base in the place that you have identified for them and remember the path.
Go to the Windows system partition (disk C) Next Program Files (x86) and copy a 1CV77 folder here
Next, go to this folder and find the BIN folder
it is looking for an executable 1cv7l.exe file.
Create him a shortcut on the desktop and run.

Now we have an empty here, so we show the platform where the bases are located. Remember I said to remember the path to the bases 1c7.7? Now we need to reach it. Click Add, call the base and go to the place of storage of the base 1C by pressing three points. You need to just go to the database folder and click OK.

When you first start the database, this error may occur,
but we do not disappear, but launch the database 1C 7.7 in the configurator mode.

Next, we go to "Administration" next "Code Page Tables IB" Select "+ Current System Installation" Click OK.
Even if when you open it, you will already stand "+ Current System Installation" still click OK. A dialog box appears. We click yes. We wait. All base is ready to run in the "Enterprise" mode. All base works. But the following situation may occur

We need to find the v7plus.dll file. You can try through the search. Most likely it is stored in your database. So it must be transferred to the Bin folder of which we created the platform label. Now we need to register this library. To do this, you need to create a label on the desktop this library. Click on the right mouse button on it and go to the properties. In the field, we prescribe "REGSVR32" click Apply and OK. Caution Do not erase quotes! The shortcut has acquired the following appearance. Now we run on behalf of the administrator (right-click "Run on behalf of the administrator") and the All Library is registered. We eliminated this problem.

If you have another kind of error when transferring you, write in the comments. We'll figure out