2017-12-07T17: 44: 22 + 00: 00

1C: Accounting Editorial 3.0, unlike 2.0, works on "managed forms".

"Managed forms" is a new approach to building the program interface, its interaction with the user and working through the network.

It becomes possible in operation in which only the input and display of information occurs on the user's computer, and the rest does another computer (server).

The speed of work increases and the ability to go to 1C through a browser or will appear.

Does it be necessary to go?

Yes, according to 1C's information letter "On the replacement of the editorial office 2.0 to the editors of 3.0" such a transition will be binding from 20xx ( By the way, the cessation of the editorial support 2.0 is no longer the first year, but there is an opinion that this support is sooner or later will still be discontinued).

So, according to currently available information:

• 1C: Accounting Revision 2.0 will be maintained until the end of the 1st quarter of 20xx in the amount necessary for the delivery of annual reporting in 20xx. These are changes in legislation and, of course, regulated reporting.
• But now reporting for the 1st quarter of 20xx will have to be submitted already in a new edition, since changes in legislation and new reporting sets for 20xx will be implemented only for the editorial board 3.0.

In general, no one knows now - how many will be supported by the second edition

How easy it will be to go to a new edition 3.0?

Generally speaking, the transition to 1C: Accounting 3.0 from the editorial board 2.0 is performed as a simple updating of the base to which we have been used for a long time. After all, with such updates, we have new sets of regulated reporting in the program.

The update process is scheduled below.

A relatively simple such update will be for users who are fully typical configuration, that is, unused in the configurator. In this case, with the update to cope any enough competent user. If the configuration is non-type, then you need to contact a specialist.

What difficulties will have to encounter after the transition?

1. If you used some external processing or reports, then in the new edition they will all stop working. And you will need new versions of these treatments for the controlled interface.
2. If your old editorial office was refined through the configurator, then all these modifications will have to be repeated for the editorial board 3.0.
3. New, unusual interface. In general, work techniques repeat the editorial board 2.0, but there are many new things. In the section I will try to post information on the techniques of work in 1C: Accounting 3.0. For news.

The process of transition from the editorial 2.0 to 3.0 steps

Manual way

6. The system will select the appropriate version of 1C: Accounting Edition 3.0, to which you can move from two. Click "Next".

7. Wait until 1C downloads all update files from the site.

8. Select "Yes, Restart 1C: Enterprise" and click "Next".

9. Now you need to wait until the update occurs. This is a very long process. Maybe and update half an hour, maybe one and a half hours. Here and from the power of your computer depends on the size of the base.

10. After the update, a new version of 1C is launched: Accounting 8.3 (Edition 3.0).

11. Again the update window - the program produces preparatory actions after the transition to a new edition.

12. Ready! Congratulations, you switched to a new version of 1C: Accounting 3.0.

But not always and not everyone goes smoothly. In case of unsuccessful update, the program will automatically make a rollback on the previous version. But, just in case, you should always be at hand backup copyMade before updating.

According to the company 1C in official letters, since 2014 it is planned to stop supporting the product "2.0. This means that 1C will cease to release updates for this program, including regulated reporting.

Vendor recommends the translation of information systems for its customers to the new version of the program - 1C Accounting 3.0 (8.3). This program is a fully working full version of the program, the official release of which is released over a year ago.

What does that require? Consider step-by-step instructions for updating or transition from the program 1C Accounting from 2.0 to 3.0.

Read more about the new version of the program can be read on the page.

Before moving from 1C 8.2 to 8.3, make sure that the company has faithful versions of programs (configurations and platforms).

Installing update templates

Before upgrading the program, you must install it. Where to take an accounting update file? The owners of the subscription should have problems.

After downloading the update, open the archive:

Get 267 video tutorials for 1C for free:

Run from the archive file setup.exe and click 3 times further:

Update is unpacked!

Preparing for update

Configuration update to editor 3.0 perhaps since version 2.0.35.6. Users who have an earlier configuration version are installed, you must first update the configuration to the version not below 2.0.35.6.

New edition supported by the platform 1C version 8.2.15 and above.

Accounting version 3.0 is available for updating to clients with a license to program version 2.0 and ITS subscription from 1C. If you need to go from 2.0 to 3.0, refer to the 1C 8 experienced programmer.

First you need to make sure that you have a typical configuration. If you do not have a support when you open the configuration (there is no lock on the configuration), in no case attempt to update the configuration yourself, there is a risk of data loss. Talk to .

The configuration must be with installed support (with lock):

Before updating, make a backup of the database!

Program update

After the preparatory stage passed and you realized that it would be possible to start updating.

The transition to the editor 3.0 is performed as updating the configuration version of the configurator tools.

To do this, you need to open 1C 8.3 in the configurator mode, open the configuration:

Sandbox

iron Man July 8, 2013 at 12:33

Transition to the editors 3.0 of the enterprise accounting configuration

This is the name of the instruction on the "ITS prof" disk in the New Release Materials section. Having tried to do the tricks that are described in this manual, you will have to get your own accounting of the enterprise (BP) 2.0 but, with manageable formas and, apparently, card games and slituity women. All actions will be made with a file version of the database.
I specifically waited for a disk with ITS, and found that the instruction published in it does not correspond to reality, although it is in the updated section. Let's try to make this transition yourself.

Screen disk ITS

In the picture above, the procedure is indicated, and everything seems to be simple, but only on the ITS website in the BP 3.0 section, you will not find versions beginning with twos.

Screen Real Site ITS

Thus, the first point of the instructions leads the user to a dead end. It will not be possible to upgrade the other suitable for the date or the most fresh version. The previously existing distribution of updates for switching from version 2.0 is missing in the list. But there is a complete distribution kit containing the necessary updates. Download this distribution and install it in the template directory. "Fishka" of this distribution is that it contains the file "1cv8.cf", which we need. With it, we will create a clean configuration of BP 3.0 and drive into it our base with BP 2.0.
We establish a platform 8.3, note the thin client file option, and the web server expansion modules (in order to fall with the "new" buns in accounting). Open the "old" (8.2) configurator, and add to the user under which we will be updated, the rights "system administrator (for transition to red. 3.0)". Unload the database, close the configurator and open the "fresh" (8.3). Create a new base in it, from the template, with version 3.0, this template appeared when we installed a full distribution. Open the created base and load the unloading of our database. This operation may take a long time. After completing the unloading, open the database (not from the configurator) and complete the update (this operation also takes a lot of time). I recommend to compress the base, since it has increased almost twice after these actions.
If your configuration does not contain changes (added), the update is likely to pass without errors, but in the case of 1C cannot be completely confident in anything.
Everything. You can open the database with a thin client, publish on the Web server and run 1C through the browser.
P.S:
1. Do not use the web server for 1C Denwer.
2. Publish the Base on the web server that is physically on it.
These tips will help you publish 1C on a web server from the first attempt.

Tags: system administration, 1c enterprise 8, accounting

This article is not subject to comment, since its author is not yet