How to remove Google account after reset. Bypass Google account verification (FRP) after resetting your smartphone (Hard Reset)

Hello to all blog readers. In this article we will look at how to bypass the password Windows. The Windows 2000 and Windows XP operating systems have better security capabilities than earlier Windows systems.
They have a more effective password system to ensure that no one without the necessary authority can access the information on your computer. Many people set a password, but unfortunately after a while they forget it. Built-in account Administrator present in the welcome window Welcome only if no other accounts exist (except account Guest), or if the computer is booted in Safe Mode.
1. Most easy way to bypass password prompted during login.
Useful if someone finds out the admin password, or if If
You just forgot your password.
Standard protection Windows It’s not particularly reliable, so getting around it won’t be difficult. This method does not imply use third party BY and relevant for
Windows XP. Actually, to bypass the password you need to boot into Safe Mode under an administrator account.
This is a service account (built-in - All versions of Windows XP have a " administrator") and during standard system boot it is not visible,
so let's load into safe mode– while the computer is booting, press the key F8 until it appears menu, in which you will need to select the item "Safe mode".

Then, when the system prompts you to select an account, select "Administrator".
After we have successfully logged into the system, we head to the equipment
"User accounts".
(« Start" - « Control Panel" - "User accounts").

Here we select account where you need to remove the password.

Then select the item "Remove password" or " Change password", of necessity.
We reboot in normal mode and use the previously password-protected account.
True, this method can and not help in that case, if the account is administrator V safe mode was previously already password protected that do quite rarely- in the hope of user ignorance. If you have just such a case, you will need a utility Reset Windows Admin Password, which is necessary burn to disk and boot from it, after which you can easily log in to the system.

If built-in account Administrator computer already password protected, you can use emergency recovery boot disks like
Windows miniPE edition or ERD Commander.

2. Disk Microsoft Windows miniPE edition contains a truncated
version Windows XP .
For loading miniPE needed in BIOS install boot from CD-ROM,
insert into tray CD-ROM boot disk with miniPE And overload
- when it loads miniPE, press the button miniPE (Start button alternative)
–Programs - System Tools - Password Renew
– a window will open
– click the button Select Windows Folder(bottom right)
- in the window Browse for Folder specify the folder location Windows
and press OK
– press the button Renew existing user password
– in the drop-down list Account select necessary account
– in the text field New Password Enter a new password
– confirm it in the field Confirm Password(don't forget the new password)
– click the button below Install
– a window will appear Information with a message Password Renew for NTs is
successfuly done!
– click OK
- close the window Password Renew for XP-based Systems
– press the button miniPE - Reboot
– after reboot, install in BIOS download from hard drive
– you can boot the system with a new Administrator password

3. ERD Commander is a bootable emergency recovery
disk, like Windows miniPE.
At PC boot from disk ERD Commander V menu download select item
– to skip local network initialization (and speed up booting)
click the button Skip Network Configuration
- in the window Welcome to ERD Commander select the one you need OS recovery,
click OK
– after loading ERD Commander, press Start - System Tools - Locksmith Wizard - Next
– in the next window in the drop-down list Account select necessary
account;
- in field New Password enter new password, confirm it in the field
Confirm Password - Next - OK ;
– press the button Start - Log Off - Restart - OK;
– after reboot you can log in login with a new password.
However, don't rely on standard protection Windows and use, if necessary, more advanced programs that prohibit unauthorized access.
How to make Windows XP Professional Edition from Windows XP Home Edition,
read

What to do if you forgot your computer password? This guide will tell you what to do if you forgot your Windows password and how to solve this problem without reinstalling the operating system. We'll also look at other possible password issues. The Windows 10 and Windows 7 operating systems have improved security capabilities compared to the earlier Windows XP/2000 systems.

By the way, your PC may have one of the most commonly used passwords installed; for a complete list of popular passwords, see -.

The latest versions of Windows use a more effective password system designed for business use to ensure that no one without the necessary permissions can access information on your computer. This is a double-edged sword. Most users forget some important password at least once. And then the user/owner of the information becomes the “enemy without access rights” for his computer.

Naturally, for every security method there is a way to bypass it, especially if you have physical access to the computer.

In this article, we will look at various methods of protecting your computer with a password and how to bypass them. We won't start with user account passwords, but with equally important passwords, such as BIOS passwords.

How to "bypass" the BIOS password?

BIOS password- one of the oldest methods of protecting a computer from unauthorized access and one of the most common. Why? This is one of the most effective means if the user does not have access to the system unit. Otherwise, it is the same as locking your house with many locks and leaving the window open.

The default BIOS settings on all motherboards do not store password information. So all you need to do to remove the BIOS password is simply reset the current settings, restoring the default configuration. But remember that resetting the current BIOS settings will destroy not only the password, but also all the settings that you set yourself.

There are two ways to reset BIOS settings. Most motherboards have a special jumper for clearing CMOS (the memory in which BIOS settings are stored). Usually this jumper is located near the battery on the motherboard, but to be completely sure, it is advisable to refer to the instructions from the motherboard. On some motherboards, instead of a jumper, there are simply two contacts that need to be closed with a metal object, such as a screwdriver, to reset the CMOS.

If your board has a jumper, then to clear CMOS, turn off the computer, install the jumper so that it closes the jumper contacts, and press the computer power button. Your computer will not boot, but your CMOS settings will be reset. Remove the jumper and turn on the computer again. You will most likely see a screen asking you to press F1 to set the BIOS settings. If you are happy with the default settings, press F1 and select ‘Save and exit’ from the BIOS menu. After this, the computer will boot as usual, except for the BIOS password.

If you don't know where the required jumper is located on your board or if it doesn't exist at all, which is quite possible, you'll have to go a different route. Each motherboard has a battery that powers the CMOS memory, allowing it to store information. As a rule, this is a standard CR2032 battery.

To clear CMOS, turn off the computer and remove the battery (you may need a thin screwdriver). After 5-10 minutes, replace the battery and turn on the computer. The BIOS will be set to default settings and there will be no password. To continue booting, you will need to press the F1 key, and if you are satisfied with the default settings, select the ‘Save and exit’ item in the BIOS menu that appears.

As you can see, all this is very simple on a desktop computer, but with a laptop, the BIOS password can become a serious problem. Due to the frequent theft of laptop computers, manufacturers have made it almost impossible to gain access without passing the password. So, if you have forgotten your laptop's BIOS password, most likely you will have to contact the manufacturer's service center.

What to do if you forgot your Windows password?

If circumstances have developed in such a way that you have forgotten your Windows password, then we recommend that you reset it using the built-in account called Administrator. This is done in safe mode, while booting or rebooting your PC.

To restore access to your computer, you will just need to press F8 and in the menu that has already opened, in which you will be presented with some additional options for loading your operating system, you will have to select the aforementioned “Safe Mode”. Next, you will need to select a built-in account, which, by the way, by default, cannot be protected by any password.

If you did everything correctly, since you strictly followed the above sequence of actions, then while still on the Desktop, you should see a window with a message that Windows is running in the “Safe Mode” you need, which is as simplified as possible. You will need to click “Yes” and go to Control Panel - User Accounts, where there is an icon for the account for which you want to reset the password. On the left, you must select “Change Password” and in the appropriate window enter and then confirm a new password. Ultimately, you will need to restart your PC for the above changes to take effect.

How to crack Windows password on a computer or laptop?

In order to do this, you will have to follow the following sequence of actions:

1. Prepare a CD or flash drive on which a special set of recovery programs intended to restore Windows should be recorded. You will need to insert it into the drive or into the appropriate port during the subsequent reboot of the computer. You can prepare this package of resuscitation programs yourself by downloading programs intended for separating, saving and restoring data, or you can download some ready-made RBCD 10.0, for example;
2. When starting the PC, in order to enter the BIOS, press the “DELETE” button. There we will need to change the installation priority and assign the computer to boot from the CD-ROM. After this we visit our boot disk in the drive and restart the PC;
3. Having entered the recovery disk, which should appear after the package of resuscitation programs has been downloaded, we must select the edited copy of Windows and go to the “System Restore” mode - the section that will be located at the very bottom of the page;
4. We look for the command line and enter “regedit” there (we look for it in the dialog settings of the same window). We find and then select the HKEY_LOCAL_MACHINE section, in which we need to select File, and then Load hive;
5. Open the “SAM” file and select the section - HKEY_LOCAL_MACHINE\hive_name\SAM\Domains\Account\Users\000001F4. Double-click on the F key located there and go to the very first value located in the line, which we will need to replace with the number 10;
6. In the same section, select “File”, and then “Load Hive”. Click “Yes” to confirm unloading the bush. We close the registry editor, thus completing the installation process, take out the flash drive or disk and reboot the computer.

How to find out your computer password?

The question: how to crack a password on a computer still remains relevant. Unfortunately, it seems possible to actually find out the password from a computer only by choosing it correctly manually. Therefore, if you are not ready to spend several hours of your free time on this process, we strongly recommend that you simply reset it and come up with some new one.

Again, it’s much easier to just reset the password and come up with a new one afterwards. However, if you specifically need to find out the password, we recommend that for these purposes you use a program called, from the image of which you will need to make a boot disk. Having correctly configured the BIOS boot from the drive and installed this program, immediately upon entering the Desktop, a window will open in which you can see user names, including the Administrator, as well as passwords for their accounts.

When wondering: what to do if you forgot the password from your own PC, it is not at all necessary to use the above methods for restoring it. You can also reset your password in the Windows 7 operating system using the Net User command. To do this, while rebooting the PC you will need to press F8. Thus, you can open a Menu that allows you to make additional options for loading this operating system, in which you will need to select not just “Safe Mode,” but one that also supports the command line. While in it, you will need to select the built-in Administrator account and in the Command Interpreter window, immediately after this, system prompts will appear where you will need to enter net user “username” “password”.

We assume that you yourself understand that instead of “username” you will need to enter the name of your local user account, and instead of “password” you will need to enter a new password. If you did everything correctly, then in order to close the window, you will need to enter exit on the command line and restart the PC.

How to reset your password on Windows 8?

In the case of this operating system, things are much simpler! You can reset your password on Windows 8 as follows:

• On the login screen, you will need to click on the special power icon, which is located in the lower right corner of your screen;
• Next, you will need to press the Shift key and click “Restart”;
• Click "Troubleshoot";
• Click Reset PC;
• Click “Next” and the system will automatically reboot in order to begin preparations for resetting the password.

How to reset your password on Windows 10?

It is not so difficult to reset the password for Windows 10 users, of course, provided that they have access to the email or phone to which their account was linked. Otherwise, you will have to reset the password from the flash drive, as already described above.

How to reset Windows 7 administrator password?

The best way to reset the Windows 7 administrator password is through the Windows Command Interpreter. Follow the following sequence of actions:

1. First, launch it. You can do this by following the following path: Start - Run - Run the program - cmd. In the Command Interpreter menu that opens, you will need to enter: control userpasswords, after which a window called “User Accounts” will open;
2. Select the account for which you want to reset the password and do not forget to uncheck the box next to “Require username and password”;
3. In the window that opens, you will be required to enter and then confirm a new password. Next, in the command boot window you will need to enter Exit and restart the PC as usual.

View the passwords that Windows stores

In addition to the access passwords of various users, Windows also stores a number of others, no less important: the password for connecting to the Internet, passwords for mailboxes or access to websites. As a rule, there are quite a lot of them, so it is quite natural that they are forgotten over time.

The operating system offers an “autofill” function for passwords and other frequently entered information in browsers (Google Chrome, Yandex Browser, Opera (Blink), Firefox, Explorer 11, etc.). So it is not uncommon for a user to enter a password once, and after a few months, naturally, cannot remember it. Everyone understands that important passwords need to be written down, but not everyone does this. And if you no longer remember the password, how can you find it out, since it is displayed as a series of asterisks: ******?

The solution is offered by programs from different manufacturers that can obtain the password from this string of asterisks. There are quite a lot of freely available programs for decrypting Windows passwords or hidden passwords from input lines in various browsers.

We will use a program from Passware. This is an easy-to-use, freely distributed program that analyzes passwords hidden by asterisks and reports them to you. She is very easy to work with. Just highlight the password line and click the ‘recover’ button.

Of course, there are also commercial versions of programs, which, as a rule, have a greater range of functions. For example, Password Recovery Toolbox scans the system and identifies saved passwords, data saved for automatic filling, Outlook Express passwords, Internet connection passwords, etc. This information is then presented in a convenient form. A few more alternatives to the programs described above: , or Password Viewer.

Windows XP user passwords

Windows XP stores user passwords in a modified form. For example, the password "password" would be stored as a string like this: 'HT5E-23AE-8F98-NAQ9-83D4-9R89-MU4K'. This information is stored in a file called SAM in the C:\windows\system32\config folder.

This portion of the SAM file is encrypted by the syskey system utility to improve password security. The data necessary to decrypt the information after syskey is stored in the system file in the same folder. But this folder is not available to any user. Only the operating system itself has access to it during its operation. You can access the SAM and system files only when running a different operating system or by connecting the drive to another Windows computer.

All versions of Windows XP have an "administrator" account. This name gives the user full access to the system and the ability to reset the passwords of all other users. This can save you if for some reason you cannot log in with your regular user password. The specifics of using the administrator password depend on the version of Windows XP: XP Professional.

The administrator password is set during installation of the operating system. If you wrote it down or just pressed enter and left it blank, you can easily log in as an administrator and reset user passwords. To log in to the system in administrator mode, on the system welcome screen, press CTRL+ALT+DEL twice, a window for entering the administrator password will appear.

When the computer boots, go to ‘start\control panel\user accounts’ and change the required password. Since you are already here, this is a good opportunity to correct your mistake if you left the administrator password blank. In addition, it is advisable to change the name of the ‘administrator’ account. This name is known to everyone and is the first name used to gain access to your computer. To change the account name, right-click on 'my computer' and select 'manage'. Expand 'local users and groups' and open the 'users' folder. Right-click on the 'administrator' entry and edit it.
XP Home.

This system will not allow you to simply access your computer in administrator mode. First, you will need to boot your computer into crash protection mode. To do this: restart your computer; immediately after testing the BIOS, press F8 several times; in the menu that appears, select ‘start Windows XP in safe mode’ (boot Windows XP in crash protection mode). When the computer boots, log in with the username ‘administrator’. There is no default password. You can now change user passwords by going to 'start\control panel\user accounts'. When you're done, restart your computer as usual.
Creating a password reset disk

Windows XP allows you to write information to a regular floppy disk, which provides the ability to reset your password. Naturally, if you have already forgotten the password and cannot access the system, then you will not be able to create any disk, but it is worth creating such a floppy disk in advance to protect yourself from such accidents.

To create a floppy disk: go to ‘start\control panel\user accounts’ (start\control panel\user accounts); select the name under which you are logged in; In the related tasks menu, select ‘prevent a forgotten password’; follow the instructions of the wizard that starts.

To reset passwords using a floppy disk: if you enter the login password incorrectly, the system will ask whether you have forgotten it; At this point, you will be able to use your floppy disk by following the operating system's step-by-step instructions.

Be careful: If you used the built-in capabilities of Windows to encrypt files and folders, but did not install the operating system update (service pack 1), removing the password will result in the loss of encrypted information.

Utilities for changing passwords Windows XP/7/8/10

There are special utilities that allow you to edit or reset Windows XP/7/8/10 user passwords. The principle of most of them is to load a minimal version of an alternative operating system, such as DOS or Linux, under which you can access files with passwords.

An example of such a utility can be found at this address: http://home.eunet.no/~pnordahl/ntpasswd/ Instructions for operation, as well as files for creating a bootable Linux disk, are available on the same site.

Please note that if you have used the operating system's functions to encrypt files and folders, changing the password using any program will cause you to lose access to the encrypted data. In this case, the following method can help, allowing you not to replace the forgotten password with a new one, but to find out the old one.

Selection and decryption of passwords

If nothing else helps, but you have physical access to the computer, then all is not lost. You can rewrite the config and SAM files and try to decrypt the passwords stored in them using special third-party utilities. As we already said, for this you will have to use an alternative operating system, such as DOS or Linux. And when the files are at your disposal, you can use one of the programs for decrypting passwords, for example, LC4 or.

You will need:

1. Access to another computer.
2. At least two empty floppy disks.
3. An archiver designed to work with the command line, for example, RAR.
4. A DOS or Windows 98 boot disk (an image of the required disk can be obtained at http://www.bootdisk.com/) or a minimal version of Linux (for example, Knoppix). There is no need for boot disks if you can simply connect your hard drive to another computer. If you are using a DOS boot disk and the partitions on your hard drive use the NTFS file system, then to access them you will need a program that allows you to view NTFS partitions under DOS, such as NTFSDOS.
5. Program for obtaining passwords. We recommend using , as the beta version of this program is free, and the free version of LC4 is very limited.

Using a bootable USB flash drive:

1. If your hard drive has NTFS partitions, copy the NTFSDOS file to your bootable USB flash drive.
2. Copy the archiver (RAR) to the bootable USB flash drive.
3. Boot your computer from this flash drive. If there are partitions with NTFS, type the NTFSDOS command, this program will show which letter is assigned to your system drive, and you will need to use it instead of the letter C in the next step.
4. Place system files with passwords in the archive. For example, if you are using the rar32 archiver, the corresponding command will look like this: Rar32 a -v a:\systemandsam c:\windows\system32\config\system c:\windows\system32\config\sam If the files do not fit on one flash drive, the archiver will ask you to insert a second one.

Hacking passwords

Each program you select will display a list of accounts detected in the SAM file. Select those for which you need to define passwords. If you are using , select Attack type: Brute-force. If you used only numbers in your password, check the ‘all digits (0-9)’ box. Start the password recovery process using the command from the Recovery menu.

Password guessing can last from 10 minutes to several hours, or even several days, and may fail. Especially if the password uses letters in different cases, numbers and special characters.

This is a good way to check the strength of your passwords. If you just want to check your password, follow the steps above and see how long it takes to guess it.

Windows password cracking programs

There are a huge number of software tools that can help you crack your Windows password. Apart from the above-mentioned program, there is also Windows Admin Password Hack. But, unfortunately, it can no longer be called current, since it only works in Windows 2000/XP. Its closest replacement is MultiBoot 2k10, which is essentially a feature-rich boot disk.

conclusions

In any case, if one of your loved ones forgot the password for Windows 7, or you yourself were forced to face this, do not despair, there are plenty of solutions to this problem. Well, so that you no longer have questions about how to crack a password on a laptop, we strongly recommend that you save them somewhere, in notes inside your own smartphone, for example.

We hope you don't have to resort to the methods we've described. To avoid this need, remember to write down all important passwords. And if there is a real need to protect information on your computer, then use passwords made of characters in both registers and numbers and do not use ordinary words. In this case, your passwords will be very difficult to crack.

3 more useful articles:

A program that checks the strength of system user passwords. This utility is used by network administrators to calculate users with...

A simple utility that allows you to display passwords hidden by asterisks. Compatible with all browsers, including...

Windows Repair is a rare type of program that can rid your personal computer of almost all…

After resetting your smartphone using Hard Reset, the next time you turn on the phone, you will be required to enter your Google account credentials. This is exactly how the situation was described to me by a user who brought me a phone with a request to confirm an account that was previously synchronized with a smartphone.

In general, this is something similar to Apply ID, which has long been used in devices manufactured by Apple. Since many complained that data is not protected at all on Android, and any password on the phone can be cracked with a regular hard reset, Google decided to improve several aspects of this protection.

As a result, starting with a series of Android 5.1.1 firmware, a strict link to a Google account began. That is, even after resetting the settings, you will not be able to fully use your smartphone until you enter the credentials of the account that was linked to it when you first turned on the device.

Of course, the user who contacted me had no idea about such protection and calmly reset the settings without any second thoughts. Of course, no one remembers the account details, since it was created in a hurry just to have access to the Play Market.

So, after another such smartphone, I decided to share my experience and show how I managed to bypass the protection with Google account confirmation after resetting the settings (Hard Reset).

Resetting your smartphone to its factory state through phone settings

Very often, a simple reset directly from the standard settings menu helps. This is explained by the fact that the settings are reset directly from the phone and the security system recognizes this as if the user did it himself, and accordingly does not request Google account verification (FRP).

Of course, the most difficult thing we have to do is get into that very settings menu, but we’ll still try to do it. I tested this method on Android 6.0 and 6.0.1.

Bypass Google account verification (FRP) after reset using QuickShortcutMaker

If you are not the happy owner of a device that was helped by the first method, then most likely you will have to turn to third-party applications for help, which will help us remove the Google account linking.

One such application would be QuickShortcutMaker. By the way, I would say that this method helps 80% of cases that are associated with FRP. So I recommend using it first.

You can see a visual implementation of points 10 to 17 in this video, starting at 5:30 minutes:

Important information for those who have “ Google Accounts“There will be no option to enter your login and password. In order for it to appear, you will have to additionally, in addition to QuickShortcutMaker, install the Google Account Manager patch. After this, the desired item should be displayed without problems in the list of Google accounts.

Third option to bypass Google FRP using Test DPC

The third option is also to install and use additional programs, this time it is “ Test DPC" If the previous method did not help you, then you should definitely try this option.

For a clear example of this method, look at the video:

It was with these images that I personally managed to bypass the protection with Google account confirmation after resetting the settings on Android. If none of the described methods work for you, don’t worry, it happens.

There are many different options for bypassing this protection, you just need to find it on our website or on some forum. Where users could share the option that is right for you.

There is also a theory that by turning off the phone and putting it on a shelf for about 72 hours, the binding disappeared on its own and the smartphone turned on the next time as if it had just been taken out of the box.

Bypass Google account verification (FRP) after resetting your smartphone (Hard Reset)

Development of the android system is one of the main tasks of Google. Among the many new features, we want to talk about a new protection program that has appeared on all Android phones with version 5.1 and higher. Thanks to it, for example, if the phone is lost or stolen, the owner of the device has the opportunity to block it. Thus, no one will be able to boot the phone without knowing the login and password for your account in . It will also work when resetting the phone settings (hard reset).

This feature is called Google Factory Reset Protection, abbreviated as FRP lock.

A similar security scheme has long been implemented by Apple in its products and has proven itself quite well. This is what will happen if you do (for example, when deleting a pattern or phone firmware). When you first start and check access to the wi-fi network, the phone will ask confirm account. A similar message will appear.

Of course, if you remember the necessary data (they are entered when purchasing the phone), login and password, there will be no problems. But how can you bypass Google account verification if you have forgotten all your personal data and there is no way to restore them via email, and the firmware does not help?

There are several ways to choose which one is right for you, I can’t say, since each phone manufacturer (Samsung, Micromax and others) produces models with their own individual features - different function keys and software.

• Reset system settings and remove DRM license without cable.

To do this, we need to get into the phone settings by bypassing the standard boot through the help system. Watch the video for step-by-step instructions using a Lenovo phone as an example.

• Soft reset via app.

Here the procedure is more complicated. To do this, we need an OTG cable with a program downloaded to a flash card, or simply reset the application (StartSettings.apk) on Micro SD and insert it into the device. More details in the video using the example of a ZTE phone.

• Other non-standard methods.

Due to the huge number of models, there is no single correct solution to this problem. For example, in this video, the author turned off the modem with Internet access during the test and was able to bypass the confirmation on the LG G4 phone.

The most complete list of all non-standard methods is presented.

I hope that with the help of our material you were able to unlink your phone from your Google account. If you have any questions, write them in the comments

Many of you leave your own options for bypassing the protection. We want to share one of them. This method was used on the Huawei MediaPad T3 7 tablet.

1- Charge the tablet 100%
2- Turn on, select the language, region and connect to Wi Fi, accepting the terms of use.
3- On the next page “Google Services”, click on the blue inscription “Google Privacy Policy” and in the window that appears, click and hold on any of the words so that an additional menu appears in which there is “Web Search”. Click on it and select Opera (namely opera, because in Chrome it may not be possible to open downloaded files).
4- Download Test+DPC. I had version 4 (as an option, use other programs quickshortcutmaker and Google Account Manager). I don’t know how anyone downloads it, but I went to my Yahoo mail, where in my incoming messages I sent myself the required file from another mail. Install and launch. Select the second item “set up device owner”, encrypt the device. Although in many videos I have seen they choose the first one. I haven't tried it personally. A reboot is in progress. Several times further, and then the DPC window pops up asking you to set up a profile. We accept the agreement. Customizable. Then some kind of sign will pop up endlessly (I don’t remember which one, I don’t have a tablet at hand anymore). Reboot.
5- By clicking next it should start (if the DPC menu pops up asking you to create a profile in English, select the lower value “skip”.
6- That's it, the tablet is running in normal mode. Go to settings and do a full reset. After turning on, we are happy with the unlocked device

They also ask in comments and private messages on Google. We have a separate article about this. Here we are discussing something a little different, namely possible ways to bypass confirmation.

Let's supplement the material with another video from a visitor. This method will be useful to all owners of Xiaomi phones, regardless of the model.

Recently, Android has implemented a protection system that prevents a new user from reusing a stolen or found smartphone. If a password is set on the device, and the new owner does not know it and cannot restore it, even a full reset through recovery will not help - Android will still require you to enter the password to which this smartphone is linked. As it turned out, on Samsung smartphones (including the newest ones like the Galaxy Note 5 and Galaxy S6 Edge+) this protection is very easy to bypass. To do this, you will need a USB On-the-Go adapter, a flash drive with an application recorded on it, and five minutes of free time.

So, if you have forgotten the password for your own Google account, are unable to recover it and want to link your Samsung smartphone to a new account, you need to do the following:

1. Go into recovery. To do this, you need to turn off your smartphone and turn it on by pressing a certain key combination (usually pressing the power, home page and volume up buttons simultaneously).

2. In recovery, do a full system reset to factory settings. All user information on the smartphone will be deleted.

3. Reboot the system. You will see a message asking you to enter your username and password.

4. Download the Samsung Bypass Google Verify APK file and write it to a USB flash drive.

5. Connect the flash drive with this file to your smartphone using a cable or USB On-the-Go adapter.

6. The smartphone will automatically open the file manager and show the contents of the flash drive.

7. Launch the APK file. A message will appear indicating that it cannot be installed. Go to settings, allow installation of applications from unknown sources and try installation again.

8. This application unlocks access to all smartphone settings. At this stage, you can disconnect the flash drive.

9. Completely reset your smartphone to factory settings.

10. After a couple of minutes, the smartphone will reboot and prompt you to enter your login and password for any Google account or register a new one. You will not see a message stating that only the previous user can log in, which means that the protection has been removed.

As we can see, the security problem lies in the fact that a Samsung smartphone, even in a locked state, automatically launches the file manager, moreover, it allows you to install applications from external media. If this did not happen, it would be impossible or significantly more difficult to hack the security and change the user. In this case, we can assume that such protection is simply absent, but it’s good that during a reset to factory settings, all user files are deleted - which means they definitely won’t get to the attacker. Let's hope Samsung takes notice of this vulnerability and fixes it.