P about the guard old versions. IV

SCORT "Guardian" is a software and hardware complex designed to provide an authorized passage to the premises and protected area zones. It can be integrated with security and security and fire alarms, as well as with a video surveillance system.

The Guardian Control and Management System is a universal security tool. It has the ability to switch to the offline functioning mode if the managing computer has failed, the connection with the controller or the network equipment fails. In the case, each system block begins to work on a programmed mode characteristic of simple autonomous systems.

In the Skud "Guard" laid great potential in terms of modeling the structures of access control systems capable of solving a variety of tasks. Modernization and expansion of the access control system does not require disconnection and inevitable in this case reduction in the level of security. As well as most universal access control systems and management, "guard" can be used to ensure safety on the most different objects.

The kernel of the SCS system "Guardian".

The basis of the system controlling connected executive devices is microprocessor controllers of high reliability from the company "Microchip Technology, Inc." The clock frequency in the diagram of the microprocessor controller access of the SCUM "Guard" forms a quartz 3.58 MHz resonator.

System architecture.

The structure of building akud "Guard" is universal: it can be used as an autonomous system, aimed at ensuring access control through one passage point as a network system in which controllers are included in one network managed by a computer. In the event of a system failure and breakage with the control center, each separate Blockerel will perform its task according to the programmed algorithm.

Power can be filed both from an external source and internal. If the power is supplied to an external source, the three-wire network cable appears in this role. In this case, one wire serves to transmit data, the other is common, and the third is the "+" power source.

Connecting to the pairing controller network is carried out using a wire for data transmission and a common wire, it is connected to the SOM port to the RS-232 interface.

Software SCORT "Guard" and its use parameters.

Installing software is made on a simplified version for a short time. The "Guardian" interface is simple and intuitively understood. The program is designed for its use by specialists of the Security Department and does not require a highly qualified operator in the field of IT.

Access control of protected premises, making identifier data, deleting user skipping and many other operations are produced in a pair of pressing manipulator. There is a major access profile for user groups and a reserve profile in the case when there is a need for a short time to make changes in the principle of admission.

Software allows you to configure special profiles for tenants blocking access after the end of the lease. Supports the Guest System of Disposable Pass.

Software allows you to track events in real time. User database protection is performed on several levels, which guarantees the safety of information with various kinds of failures. Based on the data collected, reports on the flow rate, delays, processing and other things can be built.

A tester intended for remote work with the system blocks is built into software. With it, it is possible to view and edit the data stored in controllers, as well as the control of their performance.

Parameters of interaction of hardware and software "Guard".

Software Measures "Guard" support GATE-4K series controllers, Z-5R NET, Matrix II NET, IronLogic adapters. Adapters are used to connect to the "Guardian" executive devices and combining them into one network.

The service structure of the SCORT "Guardian" is the core of the system, the drivers of the connected equipment are located on the central computer. The winning of this scheme is that the control console can be launched not only in the "Command Center", but also on other PC systems. Workstations that ensure the interaction of software and hardware can perform computers with small computing power and infant discs. This achieves simplicity of control and maintenance of data exchange lines, since all the equipment used is controlled by one computer. For the same reason, it will not cause difficulty control over the status of drivers and functional modules.

Scheme №1 Building akud "Guard".

Hardware Measures "Guardian".

1. Network controller Skud "Guard"

Used to work in the structure of both network and autonomous access control systems. It has simplicity in montage and maintenance, has a high degree of protection against failures. In the control system, access is played by the role of "translator" of signals coming from system controllers to the signals of the computer protocol. The function of this network controller includes the "Accept" mode, thanks to which the lost identifier database can be restored. After activating the mode, the data from all the logged identifiers is entered into the controller's memory - thus create a new database. The "Lock" mode allows you to use one card - skip as a block. After the data is read from such a card, the other users are prohibited or access to the room. Such a mode will be in demand if the specificity of the work requires users access to the room only after the person appointed responsible for the sector.

2. Readers Skud "Guardian"

The readers of the SCID "Guard" are devices that transmit the controller received from the subcame identifier. The system can use both standard readers, designed for use in inner premises under protection and readers in vandal-resistant execution, combining high mechanical strength and resistance to a variety of weather conditions. The reading equipment of the SCS "Guard" supports the most common technologies of keyfobs and card identifiers, such as EM-Marin and Proximity standard.

3. Controllers Summer "Guard"

The SCORT controller "Guard" is an electronic board with a built-in microprocessor. At the time of receiving data from the access point reader, the controller requests information from the computer to determine the access rights of the submitted identifier. If the query result is positive, the controller fits the signal that activates the actuator to open the lock.

If the result is negative, depending on the programmed actions algorithm, special signals, sound and light can be served by the controller. The function of the controller also includes processing of signals from the sensor system included in the system. It also provides for the possibility of autonomous operation of the controller, when a decision on access to an object is made on the basis of the identifier database and the programmed access algorithm.

4. Adapters / Guardians' Convectors.

Adapters / Guardians' convectors convert RS485 / 422 signals to USB interface signals, as well as used to monitor events in real time through the terminal program. Automatically determine the direction of transmission and reception of data, as well as their speed. Play the role of the "adapter" between the "Guardian" access control system and devices of other brands.

The project "Guard" exists and is actively developing from the year 2000. During this time, it was installed in several thousand customers. For a scoit one door on the basis of "Guard" can be installed and fully configured in 3 minutes. Full accounting of working time, building a tabel, reports on deviations (lateness, processing, business trips, hospital, etc.) is already present in the basic version. If this is not enough - you have an additional module "Analytics". All reports can be exported to CSV (for Excel), PDF, HTML, TXT, etc. For docking with 1C, the product has an open interface for connecting to the database.

The geography of distribution is from Kamchatka to Lithuania in latitude, and from Finland to New Zealand in longitude. We have such clients who have a product still under this year.

The project is updated, facing new functionality. But one constant in it: focus on stability, specifics and convenience in work.

Product good technical support:

by phone (2 days a week) Consultations with developers;
by email;
on the system of tickets;
online help on the site;
forum;
group "In contact with".

This is especially true at the stage of commissioning of the object. For assembly organizations, such assistance is free.

Join both you are to the friendly team of users on "Guard".

A set of network software "Guard" refers to the SCHUD class (access control system) and is intended for the organization of accounting for the use of working time and managing access to employees and vehicles in enterprises of any scale.

Guarde - Translated from English - "Avangard". We constantly strive to ensure that our product can really be considered avant-garde and modern in its class.

The kit consists of server and multiple client modules running on different computers on the local network. As a special case, all modules can simultaneously work simultaneously on one machine without any alterations. With a large number of pass points, controllers are organized into groups of not more than 30 pieces in one group and a separate server instance is launched for each of their groups. At the same time, the base remains common.

A well-known Firebird SQL Server is used as a data warehouse. The number of simultaneously working jobs is not limited.

The server allows you to automatically backup and restore the database, backing up event occurrences.

Software works with widespread in the CIS and well-proven in terms of reliability and price equipment with IronLogic brand. Older versions of Gate and Quest controllers are also supported.

Purpose

control of access to Sostrudnikov
autotransport access control
accounting for working hours
providing data for an analysis of labor discipline in the enterprise
monitoring events
notification by e-mail on deviations and attempts to enter the prohibited time

Structure

Module "Administrator";
Module "Monitor";
Module "Reports";
Replication server.

Supported controllers:

Z5R NET.
Matrix II Net.
Guard Net.
Gate (old versions)
Quest (very old versions)

For work, the scot is necessary so that at least one server will be launched in the system. If the number of controllers exceeds 32 pcs., It is recommended to split them into groups. And for each controller group, run your separate server.

Contents of delivery

CD with a complete set of software and drivers.
Converter Z-397 Guardian, adapted to work with "Guard +".
USB cable to connect the converter to the PC.

IMPORTANT: For normal operation, the Summer server it is necessary to use only the "Z-397 Guard" converter from the delivery kit. Profitability with other interface converters is impossible.

Features of "Guardian"

The program interface is visual and understanding intuitive. Work with software does not require high qualifications and is focused on the efficient use of its security services employees for which computer skills are not main in their profession.
Installation is also simplified as much as possible.
Extract and delete passes to users, managing access rights to secure premises is made for several clicks with mouse.
Implemented by the use of group policies for operational access rights management. The main and reserve access profiles for departments for cases when it is necessary to suddenly and quickly change the tolerance modes to objects.
There are profiles to work with tenants, self-locking after the end of the paid period. Support "Guest" Pass.
View (monitoring) occurring in the event system. Display photos.
Multi-level user data protection from various kinds of failures.
Reporting: "Tabel", "Development", "Early Cares", "Arbitrary Reports", etc. Also built the working hours accounting tab in the form approved by the State Statistics Committee - T-13.
The ability to emergency input to the key database on objects that do not have an autonomous reader "Z-2 USB".
Built-in tester for remote work with controllers, allowing you to view and edit data in their memory, control the performance of controllers.
Automatic fusion of backup packaged copies of the base with the possibility of recovery from the MH of these copies.
Firebird SQL Server.
Auxiliary utilities for administration, testing and remote support.
Enter photos to the database from files, from Web cameras, from scanners.
Import data from Guard Light.
Non-knitted number of network workplaces.
Unlimited number of system operators. Each of the operators has the default access to its departments. Admin can change this policy at its discretion, limit or open access to modules.

Module "Administrator".

Designed to configure the database and entering all user information (surnames, skip, schedules, etc.).

Accounting for parishes and care from several readers.
Search for an employee on the map using the desktop reader.
Export a list of employees in Excel.
Editing the skipping template and paste printing.
Enter photos of employees and documents from the file, from Web cameras, from scanners.
Opening the door (doors) program button.
Flexible setting of events monitoring.
Software AntiPassback is an experimental function. Acts without a license 30 days after installation on only on controllers with 2 keys memory banks. In the future, it is necessary to acquire a separate license. Call.

Module "Reports".

Included in the delivery allows you to build arbitrary reports on the principle of someone - when-what was done. After registration, reports that have already become standard reports on deviations, processing, early care, desection, working hours accounting table in the form approved by the State Statistics Committee - T-13 are available.

Report "Parish-Tabel-Table-Tearing Outputs".
Report "All inputs-outputs in detail by day."

Module "Monitor".

Designed to display information about the passage. Displays a photo associated with the skipping.

Events are displayed faster than in previous versions (notifications go to UDP immediately from the server to modules of monitors, without waiting for recording to the database).
It is possible to allow / prohibit the display of events on different PCs from different readers.

Module "Server".

It is responsible for ensuring all the information necessary for work, stored in the database, was sent in a timely manner into memory controllers. He also chooses information about the events that occurred from the local memory and loads it into the database.

Automatic backup in 23-00 databases.
Restore database from backup.
Forming a backup log of events in the form of scripts.
Automatic restart of the server using the Dispatcher Auxiliary Utility.
Check on server updates.
IronLogic controllers are supported: Z5R NET, MATRIX II NET, GUARD NET.
It is possible to work with Web converters (only in the bridge mode).

Minimum PC Server Requirements

Intel processor not lower than Core i3;
RAM: from 2048 MB;
Hard disk: at least 100 MB;
Operating system: Windows 2003 SRV / XP SP3 / Windows 7/8/10
The monitor with the resolution is no worse than 1024 x 768.

All the ones are intended for prior acquaintance with the product. It is fully operational. But to build a scot, you need to purchase the Z397.1 converter, that is what you acquire. Only with it will be implemented by the full functionality of this product. Working with other converters is not guaranteed. Simply put, the server without the specified converter will not work. All client modules and database will work.

The geography of distribution is from Kamchatka to Lithuania in latitude, and from Finland to New Zealand in longitude. We have such clients who have a product still under this year.

The project is updated, facing new functionality. But one constant in it: focus on stability, specifics and convenience in work.

Product good technical support:

by phone (2 days a week) Consultations with developers;
by email;
on the system of tickets;
online help on the site;
forum;
group "In contact with".

This is especially true at the stage of commissioning of the object. For assembly organizations, such assistance is free.

Join both you are to the friendly team of users on "Guard".

Guarde - Translated from English - "Avangard". We constantly strive to ensure that our product can really be considered avant-garde and modern in its class.

A well-known Firebird SQL Server is used as a data warehouse. The number of simultaneously working jobs is not limited.

The server allows you to automatically backup and restore the database, backing up event occurrences.

Software works with widespread in the CIS and well-proven in terms of reliability and price equipment with IronLogic brand. Older versions of Gate and Quest controllers are also supported.

Purpose

control of access to Sostrudnikov
autotransport access control
accounting for working hours
providing data for an analysis of labor discipline in the enterprise
monitoring events
notification by e-mail on deviations and attempts to enter the prohibited time

Structure

Module "Administrator";
Module "Monitor";
Module "Reports";
Replication server.

Supported controllers:

Z5R NET.
Matrix II Net.
Guard Net.
Gate (old versions)
Quest (very old versions)

Contents of delivery

CD with a complete set of software and drivers.
Converter Z-397 Guardian, adapted to work with "Guard +".
USB cable to connect the converter to the PC.

IMPORTANT: For normal operation, the Summer server it is necessary to use only the "Z-397 Guard" converter from the delivery kit. Profitability with other interface converters is impossible.

Features of "Guardian"

The program interface is visual and understanding intuitive. Work with software does not require high qualifications and is focused on the efficient use of its security services employees for which computer skills are not main in their profession.
Installation is also simplified as much as possible.
Extract and delete passes to users, managing access rights to secure premises is made for several clicks with mouse.
Implemented by the use of group policies for operational access rights management. The main and reserve access profiles for departments for cases when it is necessary to suddenly and quickly change the tolerance modes to objects.
There are profiles to work with tenants, self-locking after the end of the paid period. Support "Guest" Pass.
View (monitoring) occurring in the event system. Display photos.
Multi-level user data protection from various kinds of failures.
Reporting: "Tabel", "Development", "Early Cares", "Arbitrary Reports", etc. Also built the working hours accounting tab in the form approved by the State Statistics Committee - T-13.
The ability to emergency input to the key database on objects that do not have an autonomous reader "Z-2 USB".
Built-in tester for remote work with controllers, allowing you to view and edit data in their memory, control the performance of controllers.
Automatic fusion of backup packaged copies of the base with the possibility of recovery from the MH of these copies.
Firebird SQL Server.
Auxiliary utilities for administration, testing and remote support.
Enter photos to the database from files, from Web cameras, from scanners.
Import data from Guard Light.
Non-knitted number of network workplaces.
Unlimited number of system operators. Each of the operators has the default access to its departments. Admin can change this policy at its discretion, limit or open access to modules.

Module "Administrator".

Designed to configure the database and entering all user information (surnames, skip, schedules, etc.).

Accounting for parishes and care from several readers.
Search for an employee on the map using the desktop reader.
Export a list of employees in Excel.
Editing the skipping template and paste printing.
Enter photos of employees and documents from the file, from Web cameras, from scanners.
Opening the door (doors) program button.
Flexible setting of events monitoring.
Software AntiPassback is an experimental function. Acts without a license 30 days after installation on only on controllers with 2 keys memory banks. In the future, it is necessary to acquire a separate license. Call.

Module "Reports".

Included in the delivery allows you to build arbitrary reports on the principle of someone - when-what was done. After registration, reports that have already become standard reports on deviations, processing, early care, desection, working hours accounting table in the form approved by the State Statistics Committee - T-13 are available.

Report "Parish-Tabel-Table-Tearing Outputs".
Report "All inputs-outputs in detail by day."

Module "Monitor".

Designed to display information about the passage. Displays a photo associated with the skipping.

Events are displayed faster than in previous versions (notifications go to UDP immediately from the server to modules of monitors, without waiting for recording to the database).
It is possible to allow / prohibit the display of events on different PCs from different readers.

Module "Server".

It is responsible for ensuring all the information necessary for work, stored in the database, was sent in a timely manner into memory controllers. He also chooses information about the events that occurred from the local memory and loads it into the database.

Automatic backup in 23-00 databases.
Restore database from backup.
Forming a backup log of events in the form of scripts.
Automatic restart of the server using the Dispatcher Auxiliary Utility.
Check on server updates.
IronLogic controllers are supported: Z5R NET, MATRIX II NET, GUARD NET.
It is possible to work with Web converters (only in the bridge mode).

Minimum PC Server Requirements

Intel processor not lower than Core i3;
RAM: from 2048 MB;
Hard disk: at least 100 MB;
Operating system: Windows 2003 SRV / XP SP3 / Windows 7/8/10
The monitor with the resolution is no worse than 1024 x 768.

A set of network software "guard" is intended for the organization of accounting of working time and managing access to employees and vehicles in enterprises of any scale. The kit consists of server and multiple client modules running on different computers on the local network. As a special case, all modules can simultaneously work on one machine without any alterations.

Guardianship:
Employee Access Control
Autotransport access control
Accounting for working hours
Providing data to analyze labor discipline in the enterprise
Monitoring events

The guard includes:
The administrator module is designed to configure the database and entering all user information (surnames, skip, schedules, etc.).
The "Monitor" module is designed to display information about the passages performed. Displays a photo associated with the skipping.
The "Reports" module - allows you to build both arbitrary reports, and have already become standard reports on deviations, processing, early care, desection, etc. also build a work time accounting tab in the form approved by the State Statistics Committee - T-13. This module requires one-time registration on the site.
The replication server is responsible for ensuring all the necessary information that is stored in the database has been recorded in a timely manner in memory of the controllers. He also chooses information about the events that occurred from the local memory and loads it into the database. For work, the scot is necessary so that at least one server will be launched in the system. If the number of controllers exceeds 32 pcs, it is recommended to split them into groups. And for each controller group, run your separate server.
Utility recovery of the table of events on the logs of the Server "Guard-Doctor".
Firebird SQL Server.
Auxiliary utilities for administration, testing and remote support.

Features of "guard":
The program interface is visual and understanding intuitive. Work with software does not require high qualifications and is focused on the efficient use of its security services employees for which computer skills are not main in their profession.
Installation is also simplified as much as possible.
Extract and delete passes to users, managing access rights to secure premises is made for several clicks with mouse.
Implemented by the use of group policies for operational access rights management. The main and reserve access profiles for departments for cases when it is necessary to suddenly and quickly change the tolerance modes to objects.
There are profiles to work with tenants, self-locking after the end of the paid period. Support "Guest" Pass.
View (monitoring) occurring in the event system. Display photos.
Multi-level user data protection from various kinds of failures.
Construction of reports: "Tabel", "Development", "Early Cares", "Arbitrary Reports", and Ave. Salzazz, a working hours accounting tab in the form approved by the State Statistics Committee - T-13.
The ability to emergency input to the key database on objects that do not have an autonomous reader "Z-2 USB".
Built-in tester for remote work with controllers, allowing you to view and edit data in their memory, control the performance of controllers.

Video Instrument for Installation for SCS "Guard"
Minimum requirements for PC server:
The processor is not lower than Pentium 4;
RAM - from 512 MB;
Hard disk - at least 100 MB;
Operating system - Windows XP SP3;
Monitor with permission no worse 1024x768

IN ariant connection of equipment for working with "Guard +"
1. Desktop reader

In Guardian + Iron Logic, a set of network software "Guard +" is intended for organizing accounting of working time and management of staff access and vehicles in enterprises of any scale. The complex consists of a server and several client modules operating on different computers on the local network. As a special case, all modules can simultaneously work simultaneously on one machine without any alterations.

Equipment:

CD with a complete set of software.
Converter Z-397 Guardian, adapted to work with "Guard +".

Application:

The set of network software "Guard +" is intended for the organization of accounting for the use of working time and managing access to employees and vehicles at enterprises of any scale. The kit consists of server and multiple client modules running on different computers on the local network. As a special case, all modules can simultaneously work simultaneously on one machine without any alterations.

Purpose:

Employee Access Control
- Autotransport Access Control
- accounting of working time
- provision of data for an analysis of labor discipline in the enterprise
- Monitoring events

Composition and purpose ::

The administrator module is designed to configure the database and entering all user information (surnames, skip, schedules, etc.).
The "Monitor" module is designed to display information about the passages performed. Displays a photo associated with the skipping.
The "Reports" module - allows you to build both arbitrary reports, and have already become standard reports on deviations, processing, early care, desection, etc. also build a work time accounting tab in the form approved by the State Statistics Committee - T-13. This module requires one-time registration on the site.
The replication server is responsible for ensuring all the necessary information that is stored in the database has been recorded in a timely manner in memory of the controllers. He also chooses information about the events that occurred from the local memory and loads it into the database.
For work, the scot is necessary so that at least one server will be launched in the system. If the number of controllers exceeds 32 pcs, it is recommended to split them into groups. And for each controller group, run your separate server. Utility recovery of the table of events on the logs of the Server "Guard-Doctor".
Firebird SQL Server.
Auxiliary utilities for administration, testing and remote support.