SAMSUNG GALAXY NOTE N7000 Firmware. SAMSUNG GALAXY NOTE N7000 Firmware New Firmware for Samsung Galaxy Note N7000

Now with a custom firmware called Omnirom Kitkat Nightlies, you can upgrade Galaxy Note N7000 to Android 4.4.

An experienced team of professional developers Omnirom, not lowering hands and without stopping at what has been achieved, it claims with confidence that the "young" firmware is no inferior to its competitors. Also pleases the speed of specialists working on Omnirom. Thanks to such achievements, the owners of Samsung Galaxy Note N7000 appeared excellent opportunity to update the device to the latest version - Android 4.4 Kitkat. Let's look at the main steps of installing this operating system.

It should be noted that this firmware is based on AOSP Android 4.4, while it contains a certain number of unique features, among them: a small window, intended for incoming calls, it will constantly pop up; It is possible to promptly replace the settings; It is issued permission to work each application separately; There is support for the fact that different windows can work at the same time.

Omnirom Kitkat Nightlies is a night build, in which there are still some mistakes, bugs. You can tell developers about them.

Now go to the preparatory phase of the firmware Samsung Galaxy Note:

Apply such a guide should be used solely for the Samsung Galaxy Note, the model range of which has N7000 number;
- Next, you should get and install the latest version;
- In order to install Omnirom Kitkat Nightlies, you must execute Factory Reset, this suggests that all the information that is stored in the system section is deleted. But at the same time, the internal and external storage will be intact.
- You must create for applications, text messages, and so on.

Go to the following actions:

On your device follows;
- Nandroid backup should be created, which will allow at any time to return to the previous version of the firmware;
- Be extremely neat and follow the manual, without changing points in places;
- SAMSUNG GALAXY NOTE N7000 Battery should be charged.

Using custom firmware Omnirom Kitkat Nightlies Update Samsung Galaxy Note N7000 to Android version 4.4

To do this, perform such actions:

Download the latest version;
- also download;
- Connect the smartphone itself to your computer or laptop and then move both files. Archives should not unpack;
- then disconnect the phone Galaxy Note N7000 from computing equipment, then turn off your gadget;
- You must download the smartphone in the recovery. To do this, clamp and hold out for a certain time POWER, HOME, VOLUME UP Until the recovery appears on the screen itself;
- After you got into the recovery, you need to create a nandroid backup: choose the option - backup and Restore.. This file must be given a specific name and save it on the memory of the internal storage;
- in the main menu choose wIPE DATA / FACTORY RESET and confirm the process;
- Then proceed to the direct installation of the update file. Next you will need an option install Zip From Sdcard and Choose Zip From Sdcard, Find there Omnirom Kitkat Nightly Zip, then start the installation process;
- after installing the update file, you should do the same procedures only with the GApps file;
- setting such files, go back to the menu;
- Restart your device in the usual working mode. The first reboot may take more than five minutes. If the smartphone is hung, go back to the recovery and do the procedure again. If something does not suit you, remember that you can always use the Nandroid backup.

If your Samsung Galaxy Note Note N7000 has a need for changing the firmware, most likely one of the following problems happened:

the phone does not turn on;
the phone is constantly overloaded;
the Galaxy Note N7000 firmware is outdated;
it is necessary to reinstall the software smartphone after unsuccessful firmware.

We want to notice that for all changes in the phone software you are responsible for yourself. Find guilty if any actions were made wrong, no need!

Preparation for the firmware

To begin with, prepare everything you need for the process.

Instructions firmware

So, you have completed all the conditions of the preparatory stage, start updating.

You need to download Android 4.3 CM10.2 ROM, as well as Google Apps for your phone model;
USB cable Connect the smartphone to the computer;
Downloaded files specified in P.1 Copy the SD card to the horse folder;
Turn off your smartphone and disconnect from USB;
Download Recovery (Recovery). To do this, clamp the key combination: "Volume larger", "home", "food". You can release these buttons only after the phone screen starts flashing. Recovery mode is enabled;
In this mode, make backup and restore. To do this, follow the following way: Backup and Restore -\u003e Backup.
Then we clean the data: Wipe Data / Factory Reset -\u003e Yes
Return to the start menu of the recovery mode: -\u003e Go Back
Follow the following path to cleaning the cache: WIPE CACHE PARTITION -\u003e YES
At the next stage, choose: Advanced -\u003e Wipe Dalvik Cache -\u003e Yes
The next step is chosen by the downloaded firmware version: flash Zip From SD Card -\u003e Choose Zip From Sdcard -\u003e Android 4.2.2 ROM -\u003e YES
Further: flash Zip From SD Card -\u003e Choose Zip From Sdcard -\u003e Google Apps -\u003e Yes
The final stage of the reboot of the smartphone. Dash through: Go Back -\u003e Reboot System Now

After turning on the phone, it will have an updated version of the software.

Surely many do not want to wait for the official update of Samsung Galaxy Note on Android 4.0, and wish to flash your smartphone today. So I decided to write this small instruction, so that anyone could quickly and successfully do it. I immediately draw your attention that all the manipulations made with your favorite phone you are doing at your own risk, and neither I nor anyone else will be responsible in the case of its missile care.

But scared, everything is not as scary, and spending about 15 minutes of your time, you will receive an updated, magnificent android on your smartphone and another bunch of all sorts of buns.

First actions

So, taking a smartphone in hand, immediately copy the contents of the folder eFS. in a safe place. Since you have to do "Full Wipe", you need to save all the necessary data from the phone, make backup SMS, contacts and any other necessary files, applications, etc. The latter can be done using the utility.

Preparation for the firmware

The firmware itself, for example

We unpack the whole thing in any folder on the PC, and get out of the table (boxes, drawer) cable to connect the phone to the computer. Now you need to download the memory card in the archive in the root of the memory card, in this case it will be called ICS_STUNNER_1.4.26.1.zip.

TechProcess

Turn off your smartphone, connect the cable to it and the PC, we translate it into the "Download" mode. To do this, simultaneously hold the keys: turn on, volume down and the center button. A robot of green color appears.
Next you need to run the program for the firmware, namely the file Odin3 v1.85.exe. From the previously downloaded set. In Odin, we do not change anything, just select the Chainfire Repack i9220LP1-N7000-ICS-REPACK.TAR in the PDA paragraph. All, now almost hard hand with "Start".
We are waiting for the end of the process, after which I reboot the smartphone.
We go into the Recovery mode and choose the "Wipe Data / Factory Reset" item there. It will destroy all the data in the smartphone! It is not necessary to do, but it is extremely preferably, such a "cleaning of the brain".
Select "Install Zip from SD Card" and find the previously injected firmware file on the memory card, choose it and click confirmation. The process takes no more than a minute.
Choose "Reboot System Now" and enjoy the stitched smartphone.

Video: SAMSUNG GALAXY NOTE Firmware on Android 4.0.4

Galaxy Note N7000 users can enjoy the latest KITKAT functions in a fast and high-stable release, thanks to the release of Android 4.4.4 based on C-ROM assembly 7.1 from hardworking C-ROM developers.

Custom ROM C-ROM Assembling 7.1 is based on the latest AOSP release. It brings many new features with the oil and smooth interface on the last Kitkat firmware.

Features Android 4.4.4 C-ROM Build 7.1

Here is a brief list of the main features ported on the latest Android 4.4.4 C-ROM firmware:

Pie
Halo.
App Bar
Dark C-ROM
Active display
Floating windows
Gesture anywhere
ON-THE-GO MODE
Animation of control
Notifications LockScreen.
Application app Sidebar

Concerned users can reflash Samsung Galaxy Note N7000, following step by step the manual provided below.

IBTimes UK reminds that it will not be responsible for any damage to the device during or after installing the firmware. Users are recommended to follow their own risk.

Prerequisites

The ROM and the instructions given in this manual are intended only for the Galaxy Lack N7000 model. Check the device model by going to the settings\u003e about the phone.
Make a backup of data and settings using the recommended recovery tool like CLOCKWORKMOD (CWM) or TWRP, as it creates an integral image of existing phone settings. In the Recovery menu, select Backup and Recovery and click Backup.
Make sure that the corresponding USB drivers are installed on the computer.
Make sure that the USB debug mode is enabled on the phone, passing by navigation in the Setup menu\u003e Developer Options (Note: Press the phone assembly number seven times to unlock or reveal the hidden developer settings in the Settings section.) Then select Checkbox to enable debug mode. USB.
Make sure the phone has at least 80% of the battery charge to prevent an unexpected completion of the device (due to the battery energy leakage) when installing the Roma.
Make sure that the device is unlocked (not tied to a specific operator) and shut down the installed last ClockWorkMod (CWM) Recovery (v6.0.4.5 or higher). If you first install the CWM recovery application, check out the video tutorial below:

If the device is stuck on loading or experiences download cycle problems, clean the cache section and Dalvic cache several times before rebooting.
Allow the newly established ryom to stabilize for five minutes before starting to work on it.

Required downloads

- Android firmware 4.4.4 C-ROM
- Compatible Android 4.4.4 Kitkat Applications Google
- Philz Touch Recovery v6.07.9 (CWM Recovery 6.0.4.5 -\u003e Save the.Tar file via ODIN v3.09)

How to reflash Samsung Galaxy Note N7000 with Android firmware 4.4.4 Kitkat C-ROM

Step 1 - Download Custom Rom Android 4.4.4 C-ROM.

Step 2. - Connect and mount the phone storage to the computer using the USB cable.

Step 3. - Now copy the loaded zip file C-ROM into the root folder on the SD card phone.

Step 4. - Turn off the phone and disconnect the USB cable from the computer.

Step 5. - Now download the device in recovery mode by pressing and holding the volume up, the main and the power button together.

Step 6. - As soon as the phone goes to CWM Recovery, complete a full data reset by pressing Wipe Data / Factory Reset. Use the volume keys to navigate between options and the power button to select the option in recovery mode.

Step 7. - Then reset the cache section and wait until the process is completed.

Step 8. - Also reset the Dalvik cache. To do this, go to 'extended' options, and then press Dalvik Cache Reset. This will help prevent problems of cyclic downloads or any other download errors associated with installing software.

Step 9. - Then return to the main recovery menu and select Install ZIP with SD card.

Step 10. - Now click Select ZIP with SD card. Use the volume control keys to go to the zip C-ROM file, which you previously copied to the SD card of your phone and select it by pressing the power button. Confirm the disk setting on the next screen and the installation process will begin.

Step 11. - After the installation is completed, go to the "+++++ return +++++" section and select the restart system in the menu.

Despite the fact that the third generation of Smarts Galaxy Note is already sold in full swing, yet the first option has not lost its relevance. It was very good Galaxy Note and so far he remains one of the most popular devices in the Android world. And therefore you will be pleasantly surprised, but the developers of CyanogenMod have released firmware based on Android 4.4 Kitkat. By the way, we are even sure that Samsung will present the official version of Android 4.4 Kitkat firmware next year. If you want to check the new version of the Operations on your Galaxy Note before the official release, you can use this instruction to install CyanogenMod 11 to your smart.

Of course, the easiest and surest way to find out what will be new in the future firmware is to use a custom assembly from a proven developer. We trust the CyanogenMod team and use the previously released version of Android 4.4 Kitkat. But there are already several versions of the firmware and what exactly should be used? As a rule, the early versions of custom firmware are very buggy, so it is worth being very careful in choosing and if you have enough experience, you can take a chance. That is why we recommend the latest version of CyanogenMod, which is the best of all custom firmware for Galaxy Note.

As you know, CyanogenMod is a developer who produce firmware with a huge number of interesting features that work on any type of smartphones - on top, medium-budget and inexpensive ingraduates. Now the CyanogenMod team actively produces firmware already on the basis of Android 4.4 Kitkat, which has already become a series of firmware CM11. Therefore, this instruction is designed to familiarize yourself with the installation of the unofficial firmware CM11 on the Samsung Galaxy Note N7000.

Since this is an unofficial release of CyanogenMod 11, so after it is installed on your Galaxy Note, there can still be several errors and problems, but still the system is suitable for everyday use. Of course, soon all errors should eradicate and release a stable final version, so we will try to be aware of when the newest version of CM11 Android 4.4 Kitkat appears.

As usual, CyanogenMod has many features, applications and capabilities that can now literally touch on their Galaxy Note. In addition, CM11 is based on Android 4.4 Kitkat, which will allow you to join the more few users who met the new Operation and all its charms. In a few words - with CM11 you can improve the characteristics of your Galaxy Note, as the performance and battery life will increase, the web page loading and smoothness will speed up, and, of course, the user interface will work quickly, which is almost no different from clean Android 4.4 Kitkat interface.

If you want to use this instruction, first go through the preliminary stages. Please note that without the preparation of the smartphone you will not be able to upgrade to Android 4.4.

your smartphone should be with root rights.
custom recovery must also be installed on your Galaxy Note; We advise you to establish the latest version of CWM or TWRP Recovery, as they have been tested with CM11 firmware.
make a backup of the data that is stored on the internal memory of your Galaxy Note, as in the process of flashing it will be necessary to clean it all. Use the recovery features for creating a backup or special applications that are quite a lot in Google Play Market.
make a backup of Nandroid in case you do not like the CM11 platform and you could return to the previous firmware without excess headaches.
with the help of the computer temporarily deactivate security protection.
make sure your computer recognizes Galaxy Note, that is, all the necessary drivers are installed.
on the smartset in the settings, enable the "USB Debugging" option in menu / Developer Settings / Settings.
check the battery status on the Galaxy Note. In case the battery is charged less than 60%, then recharge it before flashing.
perform step-by-step instructions, but only if you have the version of Galaxy Note N7000. This firmware CM11 Android 4.4 Kitkat is compatible with this version of the device. If you do not fulfill everything that is written in each point of instructions, you will have a great chance to get from the Galaxy Note non-working brick.

You must understand that no one will give a complete guarantee that everything will be successful, even if you follow all the advice in the instructions. Also, the flashing will increase the meter by 1, that is, it deprives you of all kinds of guarantees. If you just recently bought Galaxy Note and the seller's warranty is still preserved, you can return your guarantee by returning to the created backup or simply by setting the stock official firmware. And do not forget that you get root-rights, which means all updates will have to be installed manually.

Installation on Galaxy Note N7000 firmware CM11 Android 4.4 Kitkat:

1. For this link, you can find the most fortunate firmware CM11 Android 4.4 for Galaxy Note N7000.
2. For this link you can download the Gapps application package.
3. Save the files on your computer so that they are in a prominent place, but in no case do not unzip the archives!
4. Connect the Galaxy Note to the computer.
5. Wait for the computer to recognize your device.
6. Copy the files that you downloaded in step 1 and in step 2 on the MicroSD card Galaxy Note.
7. After the copy is completed, disconnect the Galaxy Note from the computer.
8. Turn off your smartphone to boot in recovery mode.
9. To download Galaxy Note to recovery mode, press the VOLUME UP button simultaneously, the Home button and the POWER button.
10. Then in the recovery mode you need to select the item "Wipe Data Factory Reset".
11. After that, in the same place, select "WIPE CACHE PARTITION".
12. Return back to the menu, select ADVANCE and the Wipe Dalvick Cache item.
13. Return to the main menu of the recovery and select "Install Zip from SD Card" and "Choose Zip From SD Card".
14. Select the CM11 firmware file and install it on the Galaxy Note N7000.
15. Repeat the same process, but already with the Gapps file.
16. At the very end you need to select the "Reboot System Now" item.

That's basically it. Now it is worth noting that the first loading of the system can be long enough, but if your Galaxy Note is hung at the boot stage, you will have to download the recovery mode and make the "Wipe Data Factory Reset" and "Wipe Cache Partition". In addition, if you do not like the new CM11 firmware, you can use the "Backup / Restore" menu again using the recovery if you have made a Nandroid backup.

Congratulations, now you installed Android 4.4 Kitkat Cyanogenmod 11 on your Galaxy Note N7000.

Found a mistake? Highlight it and press Ctrl + Enter