Turning on the Internet on the iPhone. How to turn on and turn off mobile (cellular) Internet or Wi-Fi on iPhone and iPad How to turn on mobile Internet on iphone

How to enable mobile Internet on an iPhone is a fairly common request in search engines. Apple phones provide the user with several types of communication at once - mobile Internet, connection to a Wi-Fi wireless network, connection to a computer using a wire or Bluetooth. The most widespread are the first two options for connecting to the Network.

Today, any mobile operator provides the ability to connect mobile Internet in the 3G, 4G or LTE standard. With normal coverage and connection quality, you can achieve good Internet speeds. As for Wi-Fi networks, now almost every public place has its own access point with the ability to connect for free.

With mobile access, most often there are no problems; connecting is quite simple due to the fact that SIM cards are sold with all ready-made settings. You just need to install it on your phone and enjoy all the privileges of accessing the Internet from your gadget. However, it happens that the ability to transmit data over a cellular network disappears.

You can set everything up yourself. In addition, the operator can block access due to lack of money on the account or exceeding the traffic limit.

Note! Most often, loss of communication with the Network occurs due to a system failure.

You can diagnose and fix the failure yourself without any problems. If this does not work, then it is recommended to take the iPhone to a service center.

Step-by-step instructions on how to connect the Internet and make all the settings on the device from Apple:

The first step is to make sure that data transfer is enabled on the Web. You can see this in your phone settings. To check, you need to perform the following actions: "Cellular" - "Settings".
After that, you need to check the activity of two icons - "Enable 3G" and "Cellular data". They should light up green. If both or one of them is gray, then the service is inactive.
If the "Cellular Data" switch is in an inactive state, then there is only the possibility of connecting via a wireless Wi-Fi network. It is also desirable to activate the item on enabling 3G, otherwise the iPhone will only receive and transmit data using the outdated EDGE standard. It has a very low speed (up to 470 Kbps), which obviously will not suit the user.

Important! The connection of the fourth generation standard is carried out in the same way, only you need to choose a connection to LTE or 4G instead of 3G.

You should also note that the inclusion of a data transfer service according to third or fourth generation standards is not a guarantee of permanent work with them. The fact is that if the connection quality is low, the device will automatically switch to a lower format. For example, from 4G to 3G or from 3G to 2G, that is, outdated EDGE. Getting information about the current technology is very simple: you need to see which icon in the upper left corner is active. There will be one of the following:

LTE. In this case, the user can be calm and confident that the device operates at maximum speed in the fourth generation connection format;
3g. This means that the device has lowered the standard due to poor connection quality;
E. Such a letter may shock some fans of fast mobile Internet, since the phone has switched to the lowest standard and operates at the minimum speed;
If none of the indicators presented is lit, then there is simply no connection to the Network.

Note! The last item may indicate a lack of connection due to technical problems with the operator or subscriber. In addition, the cellular data switch may be inactive.

Setting

When all the above steps are completed, you need to clarify the correctness of the data entry for the wireless mobile connection. This can be done like this:

You need to go back to the "Cellular" section. At the bottom, you need to find the item "Cellular data network" and click on it to enter.
There you can see the "Cellular Data" side, in which there are three lines called APN, username, password.

Note! For various operators, their data is entered, which can be found on the official website or enter the following.

For the mobile operator "MegaFon" you need to enter:

APN: internet;
username: gdata;
password: gdata.

The MTS operator requires the introduction of the following combinations:

APN: internet.mts.ru;
username: mts;
password: mts.

For Beeline subscribers, you need to enter the following data:

APN: internet.beeline.ru;
username: beeline;
password: beeline.

For Tele2 subscribers:

APN: internet.tele2.ru;
username: do not enter anything;
password: do not enter anything.

The Yota operator requires the following data:

APN: internet.yota
username: do not enter anything;
password: leave blank.

The company "MOTIV" requires the input:

APN: inet.ycc.ru
username: motiv
password: motivation

The national telecom operator Rostelecom has established:

APN: internet.etk.ru
username: leave blank;
password: leave blank.

You can not enter any data into the smartphone yourself, but call the technical support of the mobile operator and ask to send the settings. After a short period of time, SMS will come with all the information. And even in this case, you do not need to enter anything, all settings will be saved directly from the received message.

Note! It is also important to remember to restart the gadget every time after entering. The connection is activated after the device is turned on.

Reasons for not connecting

Civilization and the development of technology have taught people to enjoy all the benefits. Any violation can cause concern and inconvenience. The same applies to the lack of a mobile connection to the Internet. Accustomed to the opportunity at any time to find out the required information or communicate with friends through social networks, chagrin sets in if the gadget stops catching the Network. But do not panic, you can try to identify and fix the problem yourself.

The fact is that mobile Internet connection problems are easier to identify, unlike other connection methods. It is enough just to know the main indicators that indicate a malfunction:

a situation where the mobile Internet is intermittent or does not work at all, while 3G or LTE indicators are active;
there is no possibility to connect to a wireless network;
unable to enable tethering on the device.

Note! The most common problems with mobile Internet are no data transfer, but the connection icon is active. This can be the cause of a small failure, or more serious problems.

To solve it, it is usually enough to restart the gadget. In addition, you can try to activate the "Airplane Mode" and turn it off after a few seconds. If none of the options helped, you need to look for the reason for the lack of connection in the network settings.

Often, the phone may stop receiving and transmitting data due to problems with the operator. In this case, they are much more difficult to determine than the technical problems of the phone.

If all the necessary settings have been checked, but there is no Internet connection, then you need to dig deeper.

Internet service not connected

This reason often causes users to endlessly change settings. But everything is much simpler. The fact is that by default, all telecom operators represented on the domestic market have a connection to the Internet. The absence of a connected service can only occur due to the fact that the subscriber independently and accidentally turned it off in his personal account or through a hotline. You can reactivate the service as follows:

call the operator and ask to return everything as it was;
contact the operator's service center;
do this in your personal account on the official website of cellular communications.

The limit of the available data package has been exhausted

This is another fairly common reason why access to mobile Internet services may be limited. Each operator provides the opportunity to access the Internet at a particular rate. If it is not unlimited, then it is limited to a certain number of megabytes received.

Note! If the user has exhausted the entire limit, the operator has the right to automatically disable the service or transfer to a lower speed.

In such cases, you can extend the validity and get an additional package for a fee, or use the following tips:

Call the hotline and ask to reconnect the Internet service from the current moment. If there are enough funds on the personal account, then this can be done immediately, if not, the user will be asked to replenish it;
There is a service for exchanging additional megabytes for collected bonuses. This can be offered, for example, by MTS. You can purchase a 100 MB package on the Web for 150 bonus points. It is very easy to get points, for example, the operator immediately gives 100 bonuses just for the fact that the subscriber has passed a social survey on the official website;
If you do not want to spend money on renewing the package, you can try temporarily switching from mobile Internet to Wi-Fi. The wireless network catches in many public places, so if the tariff package is soon updated after the monthly payment, then you can wait a few days.

Lack of funds on a personal account

Note! The most simple and banal problem among all users.

The fact is that if the subscriber does not have funds on the current account, then the operator blocks the ability to make a call, use the Network and send messages. In such cases, the wireless network icon may be active, but there may be no connection. There is only one solution - replenishment of the account. You can do this without commission on the operator's website. To do this, you need to enter your bank card details.

Note! It is widely believed that cellular Internet connection may be lost due to the recent update of the iOS operating system. It is erroneous, since the new version has no effect on data transfer.

If the loss of communication was due to a system failure, then in 50% of cases of loss of connection to wireless networks, a simple reboot will fix the problem. In all iPhones, it is performed in the same way - by simultaneously holding down the two buttons "Home" and "Shutdown".

You can also do a full factory reset. In this case, you need to take the following steps:

"Settings";
"Basic";
"Reset";
"Reset network settings".

Important! The user's personal information, such as photos, audio, video, and messages, will remain the same. It will only be necessary to reconfigure the cellular network settings.

Features of connecting and setting up mobile Internet for different operators

Most often, when connecting, the subscriber has already activated one of the tariffs for mobile communication with the Internet. Packages are different: for several hundred megabytes or a couple of gigabytes up to unlimited. The user can choose the most favorable tariff. If the active package is no longer satisfactory, then it can be replaced with a more advanced one. You can do this in your personal account on the operator's website or by calling technical support.

For switching to another tariff, they can withdraw a certain amount, plus you will have to immediately pay for using the tariff for a month. After that, you will have to replenish your personal account every month on a certain date.

iPhone mobile internet icon

To understand which standard is currently active, the Internet icon in the upper left corner of the smartphone will help. It can be LTE, 3G, 2G or E (EDGE). Thus, the user will always be able to determine the format and approximately understand what connection speed is in question. If there is no icon, then this may indicate that the phone is out of coverage.

Turning on the Internet service on an iPhone is quite simple. By default, the SIM card is already connected to the network. If there is no connection, then you can try to solve the problem yourself. But before checking and changing the settings, it is recommended to check the effect of the tariff or the balance on the personal account.

Today it is difficult to imagine a cell phone that is not connected to the Internet. Find out the latest news, weather, chat on social networks, learn something new through Google is available to you if you have mobile Internet. In order to freely use the worldwide web, you need to know how to turn on and off the Internet connection on an iPhone 5, 5s, 6, 6s.

You can connect to the Internet through a mobile operator and through a Wi-Fi connection. In the first case, you need to be in the coverage area of your mobile operator. For the connection itself, you need to go to the cellular section in the phone settings. Opposite the cellular data column, drag the slider to the “on” position. It will change color to green.

After this operation, the connection to the Internet occurred. But at low speed, 2G. This speed is enough to check mail or chat via WhatsApp. But this speed is definitely not enough to use the search and download applications. The disadvantage of this generation of data transfer is that at the time of using the Internet resource, calls will not reach you.

To enable 3G or LTE, you must be in the coverage area and have a device that can work in this mode. This connection occurs in the same way in cellular communications. Where you need to go to "data options" and then go to "voice and data". And put a birdie next to the corresponding generation of data transfer.

If you have an iPhone 4, then only 3G connection will be available to you. This phone model does not support the fourth generation of data transfer. If you are the owner of the 6th iPhone, then you can easily use the LTE network if you are in the coverage area.

The second way to connect the Internet on iphone is via Wi-Fi. Using this feature makes it easier to work on the network, removes the worry about the traffic limit and is just convenient. This connection allows you to use the Internet at high speed. There are many sources for such outputs today: this is your stationary modem at home, and the distribution of the connection in your favorite cafe, and even your flatmate.

If the version of your operating system is IOS 7 or higher, then two connection options are available to you.

1 First you need to turn on your iPhone and swipe up from the bottom of the screen. An additional panel will appear. In this panel, click on the Wi-Fi connection image located second from the left. Once activated, it will change color. 2 The second method is carried out in the phone settings. Go there and open the "Wi-Fi" option. While in it, you need to switch the toggle switch to the “ON” position, set the network parameters and password. Disabled access will be displayed in gray.

If, when using a home router to distribute the Internet, he asks to write down the DSN, then you need to click the button located to the right of the network display. Next, make the necessary adjustments. In a situation where the Wi-Fi setup is done correctly, but there is no connection, select "forget this network" in the settings. Fill in the settings again. After that, it is better to restart the smartphone and router.

Settings active but not connected

The first thing to do is to check the operation of the SIM card. If the cellular network display has one band or none at all, then this may be the reason for the lack of an Internet connection. This problem is solved by moving the phone to a higher quality coverage area. Simply put, find a place where the signal is better.

Balance check. This is necessary for those who do not have unlimited traffic usage. In such a situation, the disconnection is the result of the funds on the balance of your smartphone going into the red. It is better to use unlimited traffic for Internet surfing. This will allow you to save money and not worry that the Internet can turn off at any time. To select a suitable package, check with your telecom operator.

If the activation steps are performed correctly, the balance is normal and the signal is excellent, but there is still no connection to the World Wide Web, it is necessary to correct the data. If this is not done, then you can start the Internet many times, but there will still be no sense.

Correcting data settings is necessary for your mobile operator. To do this, in a cellular connection, you need to open the "data settings". Next, in the cellular data network, we find the option of cellular data. In the window that opens, you need to enter the data in the columns: APN, Password, username.

Each mobile operator has its own data. In order to correctly fill in these fields, you need to clarify this information with your mobile operator. You don't have to go to the head office for this. Such settings can be obtained via SMS. Or by calling the service number.

If you plan to use your iphone 6 as a modem, then the information received from the telecom operator must also be filled in the fields that are in the “modem mode” option.

Turning off data transfer on your smartphone is easy. You need to drag the slider to the "OFF" position in the Cellular Data option.

Using iPhone 6 as a modem

You can set up the Internet not only for reception, but also for distribution. The developers of Apple smartphones made sure that the phone can be configured to give the Internet to others.

Setting up this mode is easy. To do this, you will need to open the "tethering mode" in the settings. If this mode is not displayed, which is often found in model 6, then it can be found in the cellular option. Next, go to the cellular data network. Going through the list, you will find the option "tethering mode". The fields are filled in here: APN, Password, username. This information has already been used by you in other settings.

Ready. You can not only receive Internet data, but also give others the opportunity to access the network through your device.

Apple produces high-end smartphones, but this does not exclude the problem that gadget users sometimes face - the Internet does not work on iPhone. The problem occurs with different mobile operators. Most often, this is due to incorrect settings, but there are also more serious reasons. Follow the simple instructions to understand why the Internet sometimes does not work well on smartphones and how you can troubleshoot your iPhone yourself.

How to identify the problem

Problems with unlimited mobile Internet are easy to distinguish from any others. The main symptoms of problems:

you can't go online on your iPhone (via 3G, LTE or Wi-Fi)
Hotspot mode doesn't turn on (or iPhone doesn't work as a Wi-Fi hotspot)
the Internet is intermittent or pages are not displayed when there is a connection icon on the mobile phone screen

If you encounter a system error, just restart your smartphone - after enabling the unlimited Internet function, it should work as usual. Switching to Airplane mode and then returning to normal mode also sometimes helps. If simple steps did not help, the error should be looked for in the phone settings, software or hardware.

Why did LTE stop turning on

The reasons why the Internet does not work on an iPhone are different. The most common problems faced by iPhone users are:

error in wireless network settings or 3G connection
iOS system error
iPhone hardware failure
incorrect operation of the SIM card

In most cases (especially when it comes to software problems), you can fix the situation yourself.

There is network coverage, but the Internet does not work

Errors in the LTE connection most often come from the mobile operator. As a rule, a similar problem occurs after a hard reboot of the device or a factory reset. Even with good network coverage, unlimited Internet may not function. It is easy to distinguish this problem from others - the cellular antenna is displayed in the status bar, but the icon disappears. The following steps will help correct the situation:

go to iphone settings
select Cellular tab
find the "Data transfer" menu
print the APN and username, after checking them with your mobile operator

However, before checking the settings, make sure that you have paid for the Internet, have network coverage, and the operator provides this service. Ask for details about tariffs for mobile communications. If your Internet often does not work correctly, discuss technical assistance with your mobile operator. Some users, in order to eliminate problems that arise, change their mobile operator to a more suitable one.

If the 3G icon is missing

When the 3G icon in the status bar is displayed, but the browser does not load pages, you should rule out a problem with the browser. The easiest way is to download all the proposed updates to the application or delete it and install it again. If you are using a standard browser, try the following steps:

disable javascript in browser
reboot phone (Power+Home)
close the browser by double tapping the home key and swiping up on the app tab

Many iPhone owners faced poor loading of pages and clicking on links after updating the operating system to version 9.3. Updating your iOS system to the latest version will help resolve the issue.

The methods described above are relevant only if the problem is caused by a browser error, and there are no problems with LTE mobile communications on the part of the mobile operator. If the network or cellular data icon still disappears, you should look for other reasons.

Data network problems

You may not be able to connect to the internet if your cellular data network is turned off. Look in the parameters of the mobile phone - if it is disabled, then the icon in the status bar disappears. To connect a network, follow these steps:

go to connection settings menu
make sure that in the items "Cellular data" and "Enable 3G" the slider is in the activated state
turn on cellular data if necessary

Even if the cellular connection worked properly, the coverage of the cellular network may be different, which is why the smartphone does not receive a signal everywhere. Operators cannot provide equally good cellular reception in different parts of the city. If the 3G icon changes to E or H+, this is not considered a problem.

How to enable tethering

If the mobile Internet on your smartphone does not function in tethering mode or the device does not allow you to connect to the network in access point mode, make sure that the corresponding function is enabled. To do this is simple:

go to settings menu
select "Tethering Mode" or "Cellular Data" - "Tethering Mode"
move the slider to the on position
check the settings and the password that your mobile phone will generate

If everything is in order, you should restart your phone. Normally, the modem mode function is then restored. The same actions are recommended to be performed in the absence of the possibility of creating access. Another way is to reset the settings to factory settings and then enter all the parameters manually.

What to do if the smartphone stops receiving cellular communication

If you rebooted your phone and even reset it to factory settings, but the problems still persist (the 3G icon is missing in the status bar, there is no Internet access), the problem may lie in the hardware of the smartphone. Repairing a wireless module or other elements on your own can lead to damage to the manufacturer’s seals, so it’s better to contact a service center with iPhones under warranty.

Setting up the Internet on an iPhone (4, 5, 6, 7, 8, X, SE) is a delicate and delicate process. Like any other more or less modern smartphone, the iPhone can connect to Wi-Fi, 3G, 4G, and in the near future, 5G. It seems to be obvious, and what could be so difficult about setting up the Internet?

However, many Apple users who have been using smartphones from this company for a relatively recent period of time encounter problems with incorrect settings, which is why they cannot use this feature. In this article, we will tell you how to properly set up the Internet on your iPhone in order to use it to the maximum.

Let's start with setting up mobile Internet on the iPhone, as it is the most common and in demand.

1. First, go to "Settings" → section "General" → tab "Network".

2. In the "Cellular" section, scroll down, find the "Cellular data connection" subsection and go into it.

3. Pay attention to the "Cellular data" block. 3 fields must be filled in here: APN, username, password.

For mobile Internet operators, you must enter the following data:

	MTS	beeline	MEGAFON
APN	internet.mts.ru	internet.beeline.ru	internet
Username	mts	beeline	(do not enter anything)
Password	mts	beeline	(do not enter anything)

	TELE 2	Yota	motive	Rostelecom
APN	internet.tele2.ru	internet.yota	inet.ycc.ru	internet.etk.ru
Username	(no login)	(no login)	motivation	(no login)
Password	(no password)	(no password)	motivation	(no password)

Internet and MMS settings for iPhone

Internet and MMS settings on iPhone and iPad

Kyivstar mms, internet settings for iPhone 5

Reset your APN settings if you encounter problems

If all the data is entered correctly, but there is no Internet, the best way out is to reset the APN settings for their subsequent automatic or manual entry. To return to the default APN settings, do the following:

1. Open "Settings".

2. Select the "Cellular" section.

4. Select the "Reset settings" function. If you have installed a configuration profile, the profile's default settings will be used instead.

Setting up (enabling and disabling) Wi-Fi on iPhone X, 8, 7, 6, 5

Next on our list is connecting and setting up a Wi-Fi network. Connecting to the network is extremely simple and the only data you will need to enter is the set password (unless the network is open or public).

Here's what you need to connect to Wi-Fi:

1. Tap the "Settings" icon on the home screen, and then tap "Wi-Fi".

2. Make sure the Wi-Fi slider is set to active, then select the network to connect to. If you have previously connected to a specific network, when you are in range of the hotspot, your smartphone will automatically connect to the network.

3. After you select a network, a password prompt will appear .

4. Enter your network password.

5. Click the "Join" button.

6. Free, public Wi-Fi networks usually do not require passwords. However, before connecting to such networks, you should take care of security in order to avoid unpleasant situations with data loss and interception.

If you cannot click "Join", it means that the password you entered is incorrect. Please try typing again or contact your network administrator for further assistance.

After you have successfully joined the network, a check mark will appear next to the network name, and a Wi-Fi signal strength indicator will be displayed on the upper left side of the screen.

Articles and Lifehacks

How to turn on the Internet in iPhone 4? There is nothing complicated about this, you will need 15 minutes of free time, after which you will be able to be on the global web anytime and anywhere.

Internet setup steps in mobile

To take advantage of Pocket Internet, you must:

Make an EDGE/GPRS connection on your number. To do this, call your operator and order automatic settings, or contact any communication salon of your mobile network.
To access the Internet, go to your phone settings. After that, you will need to select the "Basic" and "Network" sections.
When setting up the Internet, 3g must be deactivated on your mobile.
Click on “Cellular Data Network”.
Enter the access settings that the operator sent you, if you have not saved them before.
After entering the data, exit the section after saving all the settings.
Now you can try to access the Internet. To do this, use the browser installed on your phone, or download the one you like best.
The phone will set up EDGE itself, after which it will go to the site that you specified in the browser.

What you should know about turning on the Internet

You should know some other secrets that make it easier to access the network from a mobile phone:

If you want to see how much traffic you have left on the number or how many MB you have already used, then you need to go to "Settings" and "General".
Then select "Statistics" and "Data transmission over a cellular network". In some cases, you can use additional applications, such as DownloadMeter.
If you want to access the network via Wi-Fi, then you should take care to turn off 3g.
In most cases, 3g is turned off automatically, but if this does not happen, then go to the "Settings", "General" and "Cellular Data Network" sections, where you will need to put a dot at the end of the APN address.
If in the future you plan to access the Internet via 3g, then you will need to erase the dot.