What to do Word mode of limited functionality. Mode of limited functionality in Word (Word) - how to remove? Limited functionality mode - what it means

The inscription "Limited functionality" in the top of the Word document suggests that the text has been created in an earlier version of the editor (1997-2003), that is, has an extension .doc, not DOCX. Therefore, Word emulates the previous (old) distribution and cannot provide the user with its new editing features.

Disable "limited functionality" mode in two ways. Let's figure out how to use them.

Note. Detailed information (access limits and functionality, version, etc.) on the open text document can be viewed in the File section → Details.

Method number 1: Change of document expansion

Saving a WORD project with another extension (in particular, DOCX) allows you to save the source document unchanged.

1. Open a project with functional restrictions.

2. Click on the "File" section and select the "Save As ..." option.

3. In the system window, in the "Name ..." line to remove the old ".doc" format, specify a new name, and in the "Type ..." menu, set the Word Document.

5. In the opened panel, read the information about the transformation of the project, and then click on the "OK" button.

Tip! To make more this message on the display, install the check box next to the inscription "no longer set this question".

Upon completion of the procedure, an identical text document with extension will appear in the directory. DOCX.

Note. The project size.docx is less than similar (about 1.5 times) project in format.doc.

Method number 2: document transformation

1. Open the file. Go to: File → Details.

2. In the on the right panel, press the "Convert" block to remove the limit. And then in the additional query - "OK".

After performing this operation, the status of a limited functionality at the top of the file window will disappear.

How to insert project.doc V.Docx?

Inserting a text document.doc in a draft new sample is carried out by means of a standard copy function:

• highlight the text in the file.doc: Press the "Ctrl + A" keys;
• click on it right-click;
• select "Copy" menu;
• go to the project.docx and set the cursor to the insertion place (where the copied text should be);
• press "Ctrl + V" ("Paste").

You can also use the integrated editor option:

• go to the "Insert" section;
• click the arrow in the "Object" add-on and click "Text from File ...";
• in the new window, select the file.doc and cland the insert command.

Enjoy your work in Word text editor!

If you do not know how to remove the mode of limited functionality, read the article.

If you opened a Word document, and saw the inscription on top "Limited functionality mode"then the question immediately appears: "What can it talk about, and how to get rid of such an inscription?" Let's deal with.

Mode of limited functionality in Word: how to remove, cancel?

This inscription means that you opened a Word document in the old version of this text processor.
Previously, this program was created with disabilities, and documents Word 2003 have expansion Doc, and new ones (2010-2013) - "DOCX". When working with the previous word algorithms, the new functional buttons will be inaccessible.

If you need to remove these restrictions and make all new algorithms available, then you need to save the document in the new version. To do this, open the menu and click on "Save as". Then instead "Document 2003" Choose "Word Document".

There is another method, how to remove this mode is to convert functionality. Perform the following:

• Open the document with which you need to work.
• Click on "File". Choose "Intelligence" and click on the block "Convert".
• Then click "Okay".

Now all restrictions must be removed. Save all changes by pressing the key combination "Ctrl + S". This method of conversion is more convenient for work, as the original and document in the new format will also be saved.

Video: How to remove limited functionality mode

When opening old documents, the latest version of the office editor may notify the user about the unavailability of some functions when working with it. In what cases appears limited functionality modeWord. 2016 how to remove the error and restore performance?

Purpose

This is not an error, as some users believe this feature is designed to prevent controversial situations that could arise due to differences between the programs. In essence, it imitates the work of earlier versions of the editor, for example, 2007 or 2013, the set of features depends on which program a document is created. In limited functionality mode, you can perform all the main steps: view, edit and print the document. The main differences are to change the interface, as well as restrictions on action with objects.

It is easy to exit this mode, but before this, keep in mind that the document created in Word 2016 may not be incorrectly displayed in earlier versions. Therefore, when another user will work with the file or you need to transfer the document to another PC, it is better to leave it in the source format.

Transition to full functionality

This requires to overwrite the document. You must select the "Save As" item in the menu, and then specify the desired file name and address. It is better to enable the version of the program in the file name, with which it is created to not get confused. Please note that the format should remain docx if you save the file to DOC, it will not be compatible with the latest version of the editor and the functionality limitations will remain. This method allows you to create two copies of the document, this is the most common option, since it allows not to lose source data.

If the user is confident that the source file is not needed, you can use the document conversion. To do this, go to the "Details" tab, and click on the "Convert" icon. Next, a warning will appear that after converting the source document will be lost. It also happens that document formatting is violated from the execution of this procedure, since the initial version is overwritten, it will have to restore the appearance manually.

You can completely deactivate limited functionality mode using the registry, but it is recommended to perform only experienced users.

Sometimes it becomes necessary to work with documents that are created in earlier versions of Microsoft Word, for example, Word 2010 or 2007. When opening such documents is included. compatibility Mode (limited functionality), which imposes certain restrictions on the user's capabilities. How to disable compatibility mode and in what situations it is not recommended to do this, you will learn from this small lesson.

In compatibility mode, some options are disabled, i.e. Only those commands are available to you that used when creating a document. For example, when opening a document created in Word 2007, you can only use those tabs and commands that are present in Word 2007.

In the figure below, you can see how compatibility mode affects the availability of specific commands. Since the document is opened on top in compatibility mode, only commands available in Word 2007 are active.

In order to leave the compatibility mode, you must convert the document to the format that matches the current version of Microsoft Word. However, if you work with users of other Word versions, it is desirable to leave a document in compatibility mode so that the file format does not change.

For more information on which functions are disconnected in compatibility mode.

Transform Document

If necessary, you can use the entire Word 2013 functionality, for this you need to convert the file to Word 2013 format.

Note that the file conversion can lead to a change in the original layout of the document.

Probably many of you when working with documents in Microsoft Office, faced with such a concept as a limited functionality mode. But what is it? And is it possible to remove this mode? We have to find out.

If you say short, then the mode of limited functionality is a special option that does not support the old formats of some documents in the new version of Word. This means that when the user opens documents in Word 2010, as well as created in older versions of the application, then automatically in the title bar displays the "limited functionality" mode, that is, compatibility mode is turned on.

Including it is a guarantee that during work with one or another document, extended and newer features that are available in Word 2010 will not be used. But at the same time, the limited functionality of Office allows users to edit and make amendments to texts created in earlier versions of the application. In addition, in this mode, the overall structure of documents is preserved.

I want to say that it is impossible to disable it. But there is a chance to enable the option of the compatibility mode of this version of the application with older Word files. Limited functionality mode in this case can be automatically disabled. But how to understand it? Let's find out in more detail.

The thing is that the Word 2010 document can be opened in one mode of three. Namely:

1. First - Documents created in Word 2010.

2. Second - Documents created in Word 2007, but having compatibility mode.

3. Third - created in Word 97, having a similar mode.

Allows you to work with documents of old versions of the application and use all Word 2010 extensions. If it happened that when you open the text in the line of its header, there is a "limited functionality mode", then it is necessary to carry out some work in order to determine whether this file is compatible with this file with the new Version of the program, and therefore remove restrictions.

To do this, you need to open the file "File" and select the item "Details". Next, go to the "Prepare for Shared Access" section, select "Problem Search" and click on this button. After that, you must select the "Compatibility" command and then click "Select Displays Versions". Here, near the name of the document of the document that you have opened, a check mark will appear. And if, after that, the inscription in the line of the name "Limited functionality" name will disappear, then we can assume that the compatibility of the application version is available, which means all the functions of the program are available.

You can continue to work on these documents. But if necessary, you can also convert it. To do this, you just need to select the "Convert" command, and after that all compatibility parameters in Word are cleaned. It was then that the layout of your document will look as if you were created in Word 2010.

Please note that if your DOC format file, then in the case of a new version of the program you need to convert it to DOCX format. But in principle, the conversion command must automatically change this format.

And if you are still not clear how to make a document transformation, then in this case there will be a step-by-step plan for how to do this:

1. Go to the "File" tab.

2. Find the "Details" tab and click on it.

3. Click on the Transform command.

Everything, the document is converted to that format that you need. And in order to create another copy of this file, do the following:

1. Press the File tab.

3. In an empty line of the File Name field, enter the name of your document.

4. In the File Type list, select "Word Document".

Everything, nothing complicated. Now you can work in the mode you need.