Firmware Xiaomi Redmond Note 3 Pro.

The owners of Android devices of the popular Xiaomi manufacturer are often puzzled by the installation of system software in their devices, pursuing different goals. In the article proposed below, the methods of updating, reinstallation, change of type and restoration of firmware on the Xiaomi Redmi Note 3 Pro smartphone are considered.

Despite the balance of hardware components, which are characterized by Xiaomy Redmi Music 3 Pro (RN3 Pro), as well as a high level of MIUI OS functional, argue that the smartphone is fully configured "for itself" and only those model users are obtained from the device, who can flash it.

Before switching to the consideration of ways to interact with system software, it is necessary to note two important points:

Preparation for reinstalling Android

Before starting intervention in the system via the smartphone in any way, you need to perform several preparatory steps. Proper preparation ensures the safety of the firmware and achieving the desired result without problems and failures, and also allows you to get a PC to your order, which can be used as a tool for restoring the device's working capacity if "something goes wrong."

The implementation of the preparatory phase under this material is carried out through the corporate identities developed by Xiaomi to provide users with the capabilities of almost all types of interaction with the software part of the manufacturer's devices.

Step 1: MI-Account

Most of the RN3 Pro owners are likely to know about the possibilities of the MI account and successfully use it during the operation of their apparatus. The specified account will also be required when conducting separate procedures, related to working with system software. If about the above "key" to access Xiaomi services, you have to hear for the first time, you must implement the instructions for creating it from the article on the link below, and enter the account on the smartphone.

Step 2: Install Mi Phone Assistant

Siaomi to work with brand devices is offered functional software. Application manager of phones got a name MiphoneassistantAnd with it, you can spend many operations related to the reinstalling Android, as well as the firmware process directly.

The disadvantages of Miphoneassistant 3.0 include the absence of official translation of the application interface different from Chinese, but this defects corrected by third-party developers. To get on your PC an English-speaking version of the assistant, follow these steps:

Download and unpack the archive containing distribution tools and package with files to translate the manager's interface into English from the following link:
Run the installer "Mi Phone Assistant 3.0.exe" And click on its windows buttons marked on screenshots:
Wait until the installation is completed.
Remove the mark near the screenshot in the screenshot below (1) and press the single button (2) in the finish window of the installer.
Copy the catalog "MI_PHONE_ASSISTANT.RES" From the archive with the installer in the clipboard.

Go to the Catalog with: / Program Files (x86) / miphoneassistant and delete the folder in it "MI_PHONE_ASSISTANT.RES".

Insert a folder from the MIPHONEASSISTANT directory from the MIPHONEASSISTANT directory in paragraph 5 of this instruction.

Run the program by clicking on its name in the Main Menu of Windows.

Mi Phone Assistant is ready to operate, it remains to log in to the MI account to access the application functions.

Step 3: Work modes, verify the correctness of the driver installation

Regarding most Android devices, the most effective tool that allows you to fulfill the full firmware and related manipulations is a personal computer equipped with specialized programs. To ensure the interaction of the "Big Brother" and mobile device are required by Drivers.

Xiaomi Redmi Note 3 Pro users who completed the previous preparation step, that is, installed MiPhoneassistant, about the presence of drivers for interacting with the device in their system may not be worried - all components are part of the specified application and integrate in Windows during installation.

To check the correctness of the installation of drivers and simultaneously find out how to switch the device to various states, open "Device Manager" and connect the device by transferring it to the modes below.

USB Debugging. (Debugging by yusb). To activate the mode on the downloaded phone loaded in the Android:
Recovery. - Recovery environment. To transfer the apparatus to this state:

FastBoot. - The main mode for conducting operations related to working with the RN3 Pro software using PC:
EDL (Emergency Download) - can be said, the emergency state in which the phone can go as a result of serious damage to the program part. The computer in EDL mode is determined in the form of Qualcom HS-USB QDLoader 9008 ».

In some cases, during the firmware by some RN3 Pro methods, this mode can be switched forcibly, and in different ways. The easiest way to do this using a specialized FastBoot script:

Step 4: Bacup

If the failure to comply with the preparatory actions described above, simply will deprive you the ability to flash RN3 Pro from the computer, then the refusal to create a backup copy of the information accumulated on the phone during its operation can lead to much more deposits.

It is strongly recommended to create a backup of all important before each reinstalling system on the device, in any available way! Remember, even if you are an experienced user and confident about the safety of the procedures held - the reinsurance is never superfluous!

Information from the memory of Xiaomi devices can be archived by different methods. In addition to individual tools from those proposed in the article on the above link, you can use the means integrated into MIUI. In our materials, these solutions have already been considered, and with respect to Redmi Nat 3, recommendations for other manufacturer models are applicable.

The execution of the instruction proposed below allows you to save almost all user information from the device to the PC disk, and then restore information on the smartphone at any time. The tool used is the above-described manager for working with Xiaomi - Miphoneassistant devices.

Run assistant, log in with the login and password from the MI account.

Connect RN3 Pro C previously activated "USB debugging" and "Installation via USB" to PC.

After the device decides in the program and will display information about it, click "Backup".

In the applications that opens, click "NEW Backup".

Look at the smartphone display - it displays a request for access to the MI PC Suite to the phone - tap "Allow".

Expect the end of the analysis of information stored in the memory of the apparatus - disappearances notice "READING DATA ON DEVICE ..." In the windows of the assistant.

In the MIPHONEASSISTANT window, set the checkboxes under the pictograms corresponding to the types of archived data. As the stamps add above the button "Start Backup" The value of the scope of disk space will be changed, which will take the backup.

To start copying information from the phone to the PC disc, click the button "Start Backup".

Expect the completion of the archiving process. The procedure is not sufficient, and you can watch it using the execution indicator.

When the backup is created, an active button will become an active button in the assistant window. "COMPLETE", Press it.

This archiving information from RN3 Pro completed. Folders with backup files are stored in the catalog "MI_ASSISTANT_BACKUP"located in the root of the system partition of the computer disk.

To recover data subsequently:

Connect the phone to the PC in the same order as when creating a backup. Click "Restore" In the Mi Assistant window.

Set the switch to the position corresponding to the backup, the data from which you want to restore, click "Next".

Put the marks near the data types that you want to return to the phone and click "Start Restoring".

Wait for the completion of the information transfer process from the PC disk to the memory of the device.

At the end of the information recovery procedure in the MI Assistant window, a button will appear "OK" - Press it, after which you can turn off the machine from the computer.

Step 5: Unlock bootloader

If the goal of the Redmi Note 3 Pro firmware is not just reinstalling / updating / rollback of the version of the official Android-envelope MIUI, and more serious interference and replacement of the systemically either of its individual components on solutions from third-party developers will require a preliminary unlocking of the device loader. The procedure is carried out by the official method and described in the article:

When performing manipulations with certain methods proposed in this article, be careful - in the description of the instructions it is indicated, whether the operations listed in them are applicable for devices, the loader of which was not unlocked!

In fact, the last preparatory step described in this article could be put in the first place. The main thing in any work is to determine its goals and understand what result you want to achieve, and in relation to the reinstall software on RN3 Pro, this is expressed in the type and version of Android, which will control the work of the hardware components of the smartphone after all manipulations.

The varieties of MIUI firmware are described in the material on the link below, there can also be a description of the package loading methods and addresses in the global network for which archives with system software are posted.

Links to download all files applied during the experiments carried out to create this article can be found in the description of the firmware methods. As for the customs, with the exception of the OS based on Android 8.1 Oreo from an example at the end of the material, these solutions to the user will have to search independently on the Internet and choose the most suitable product by installing and testing different options, we will only consider the installation method.

To work with the REDMI Note 3 Pro software, a wide range of tools can be applied, the most effective of which are described below. Select the tool and instructions in accordance with the original condition of the machine and to a greater extent - with the desired result, that is, the type / version of the OS, which is controlled by the device to function as a result.

Method 1: integrated in MIUI means

We need to pay tribute to the developers of the Xiaomi system to developers - they equipped the MIUI operating system with a mass of functional, but simply easy to use tools. The first way to reinstall Android on the RN3 Pro, which we will look at is the easiest in implementation and does not require anything like that, except for the smartphone itself and connecting to Wi-Fi. All actions are made using android application "System Update"integrated into all versions of the official OS.

The name of the specified means speaks of its main purpose - receiving and installing OTA updates, but the tool allows you to install any types (Stable / Developer) and version of the official Miui. Below is a transition from the development MIUI 10 v8.8.23 on stable MIUI 9 v9.5.6.0.But the instruction works and in relation to any other combinations of installed and installed OS assemblies.

The following method refers to full removal of information from the smartphone, so do not forget about the need to pre-create a backup copy of all important!

Load the ZIP package with the desired Miui assembly. Next, copy the RN3 Pro obtained into the internal memory if the download was made using a PC.

Open "Settings" MIUI and go to the section "About phone".

Tapnet "System Update", then open the additional actions menu by clicking on the image of the three points at the top of the screen on the right. The right menu item is "Select Firmware File"Touch its name.

In opening "Explorer" Go along the location of the file with the firmware. Next, set the mark near the package name and tap "OK".

Expect the completion of the package check for authenticity, and then unpacking it. Under the system that appears as a result, the need to delete data tap "Update".

Next, confirm the consent to delete data from the phone's memory again by clicking "Clear". As a result, the device will restart and install the OS from the file, accompanied by the display on the notification screen. "MIUI is updated, do not restart the device" and filling performance indicator. Further procedures are automated, expect RN3 Pro reboot and the operating system screen appears after initializing its components.

Next, spend the definition of the main parameters of the Miui installed and restore the data if necessary.

Firmware using the standard tool from Xiaomi is complete, you can use the MIUI device selected when downloading the version of the package.

Method 2: Mi Phone Assistant

The Miphoneassistant Miphoneassistant Manager is equipped among other features to work with Xiaomi Android-devices system. If you fulfilled all recommendations related to the preparation and stated above, the application has already been installed on your PC and ready to help not only in reinstalling, updating, return to the older version of the official Miui, but also when restoring the system software that has stopped functioning normally (the device is not Loading in OS).

In the example below, the installation of the system is demonstrated, the package with which you want to preload to the PC disk. Used assembly - MIUI 10 Global Developer 8.8.23. - The newest solution for the model at the time of writing the article. Do not forget using the instructions below, you can install an absolutely any official version of the operating system for the device.

As a result of the manipulation of the manipulation in question, all the data contained in the phone's memory will be destroyed! Preliminary backup is required!

Run Miphoneassistant, log in to Mi account.
Next, go to the application section "Flash Rom".
Turn the device to the recovery mode and connect it to the PC.

In the recovery environment menu, select "SONNECT WITH MIASSISTANT".

As soon as the application "sees" a connected device, translated into the desired status, the buttons will appear in the window:
- "Download Rom and Flash Update" - It will be active if the system version can be updated, that is, a more old MIUI assembly is installed in the device, rather than available on Xiaomi servers.
- "SELECT ROM PACKAGE" - To install the firmware loaded to the PC disk.
- "WIPE / ERASE ALL DATA ON DEVICE" - Resetting the settings and delete all data from the smartphone memory before further manipulations.
Click "SELECT ROM PACKAGE"What will lead to the opening of the window with the choice of options for reinstalling OS:
- "Flash" - With saving information in the phone.
- "Quick-Flashing" - Overwrite the device's memory with data from the firmware file, with pre-formatting. This option is recommended to use.
Click on the image of lightning.

Confirm two requests, click "Flash"

in appearing windows

after that, the phone's repositories will be cleaned.
Upon completion of the format, a system software selection window will open, specify the path to it and press "Open".
Expect the end of checking the package assistant.
Click on the appelordable requests of the application first "Upgrade",

and then "Erase".
It remains to be expected to end the process of transferring files to the device's memory, and then integrate OS components. The procedures are accompanied by filling out the execution indicators in the assistant window and on the Red RED NOTH screen 3 pro.
Once all manipulations are completed, the phone will automatically restart, and MiphoneaStant will stop "see" the device connected to the USB port.
Disconnect the RN3 Pro from the computer and expect the appearance of the MIUI welcome screen from which the OS setup begins.

If the phone was not untied before manipulation from the MI account, the blocking information appears on its screen. "This Device Is Locked". Click "Open Wi-Fi Settings" And connect to the available Wi-Fi network.

Tapnet "Activate this Device"And then on the next screen, enter the password from the Xiaomi account and click "ACTIVATE".
Now you can go to the definition of the main parameters of the freshly installed OS, that is, specify the language of the interface, enter the Google account,

select the topic of design, etc.
After configuration, the MIUI desktop will appear before you - the firmware is considered completed.

Now there are no obstacles to the use of the Miui of the selected version and smartphone as a whole for its intended purpose.

Method 3: Miflash

In the arsenal of software tools developed by Xiaomi to work with the system on their devices, there is another application that received the name Miflash.. The tool is designed to a greater extent for service centers, rather than ordinary users, but at the same time used by many REDMI Note 3 Pro for firmware for firmware, including non-operable specimens.

The installation of the extreme version of MIUI 9 STABLE is demonstrated below for the model, as well as installing the MIUI beta assembly 10. Packages from examples can be downloaded from the links below, but you can use any other official options for firmware by applying Miflash.

EDL mode

The RN3 Pro firmware in the "emergency" mode of operation is the most cardinal method of carrying out the operation, its use allows not only to reinstall the system, but also restore the inoperative software instances of the model. The instructions can be used in relation to any RN3 Pro phone regardless of the loader status (blocked / unlocked).

Download and unzip the archive with the FastBoot firmware.

Install and run Miflash.

Switch the machine to mode "EDL" And connect it to the PC.
Click "Refresh" In the application window, which should lead to the definition of the device in the Miflash - in the field "Device" The comment number is displayed.

Click the download button of the directory with the firmware to the application - "SELECT"And then enter the path in the selection window to the folder resulting from unpacking the archive from the OS. This is the directory that contains a folder "Images"- Highlight it and click "OK".

Specify the mode of overwriting memory using the switch at the bottom of the Miflash window. It is recommended to choose "Clean All"that is, to pre-clean the storage sections before installing the OS.

Everything is ready to start the firmware - click "Flash"to initiate the process.

It remains to be observed for the implementation of the MIUI reinstall procedure, by no means interrupting it with any actions.

Upon completion of data transfer in column "Status" A notification will appear "Flash Done".

Disconnect the USB cable from the device and start it, while holding the key for a long time "POWER". Expect to complete the initialization of the installed system software components (the device will be "hanging for quite a long time" on the boot MI) And the appearance of the welcoming screen of Miui.

Next, the choice of the main android-shell settings.

As a result, he is obtained by Redmi Nat 3 about with the official operating system established by the "full" operating system.

FastBoot mode

The owners of the model under consideration, which conducted the loader unlock procedure, can install the official version of MIUI "full" without switching the phone in "EDL", and using mode "FastBoot". By the way, this method is the fastest and simple solution when returning to the official MIUI with custom and localized assemblies.

With regard to devices with a locked loader, the instruction proposed below does not apply!

Unzip the TGZ packet containing the MIUI system of the desired version, to the hotel directory.

Translate RN3 Pro to mode "FastBoot" And connect it to the computer.

Run the miflash and click the button. "Refresh" In the application window. Make sure the device is determined in the program correctly, that is, in the field "Device" The serial number is displayed.

Next, act in the same way as when working with the device in EDL mode:
Upon completion of Miflash in the field "Status" A notification will appear "Flash Done"And the smartphone will restart and then starts loading automatically.

Expect a welcome screen display,

configure MIUI settings,

and go to the use of an installed OS.

Method 4: QFil

In situations where the use of official funds from Xiaomi is impossible for any reason or fails, as well as when recovering "heavy bricks" Redmi Note 3 Pro, a universal tool from the developer of the hardware platform of the model - Qualcomm Corporation is applied. The utility was named QFil. and is part of the software package QPST..

All manipulations via QFIL are held in mode "EDL", regardless of whether you transferred a smartphone into this state, forced or the device turned out to be in it as a result of "oxidizing".

When transferring data to the device's memory sections via qfil, the same packages with OS images are used, which for Miflash - archives can be downloaded from the official Xiaomi website or from the description of the previous method of reinstalling android on the machine. To work you will need files from the catalog "Images"obtained as a result of unpacking a package with firmware.

Download and unpack the archive with the QPST distribution and install the complex on the computer by opening the file QPST.2.7.438.MSI..

Application installer standard

and does not require redefinition of any installation parameters.
Open C: \\ Program Files (x86) \\ Qualcomm \\ Qpst \\ Bin \\ and find files among those present in it «Qfil.exe»Run the utility.

At the top of the QFIL window there is a switch of operation modes "SELECT BUILD TYPE". Translate it to the position "FLAT BUILD".

Next you need to upload files from the directory to the program. "Images"As a result of unpacking the archive with the FastBoot firmware for the model. Click the buttons and specify the paths to the files and then click "Open":
Connect to the RN3 Pro computer in mode "EDL". Expect for a few seconds while QFIL will determine the device - at the top of the Utility window inscription NO PORT AVIABLE Change on Qualcomm HS-USB QDLoader9008 ».

To start the firmware, click the button "DOWNLOAD".

The program will begin to transfer data from file-images to the appropriate sections of the phone's memory, which is accompanied by the appearance of a notification of what is happening in the field. "Status". Expect the completion of the procedure, without taking anything.

If everything goes successfully, notifications will be displayed in the QFIL Log field: "Download succeed", as well as "FINISH DOWNLOAD".

You can disconnect from the USB cable device and start it in MIUI by holding a key "POWER" 5-10 seconds.

Method 5: Modified recovery TWRP

Having learned to reinstall / update / restore the official assemblies of MIUI on Redmi Music 3 Pro with PCs and specialized applications, you can switch to more serious manipulations - installing informal OS, which for the device is simply created just a huge amount.

Be careful! All installation instructions in RN3 Pro informal Android assemblies and modified recovery applicable exclusively to devices with a pre-unlocked loader!

Almost all Android-shells for the apparatus under consideration created or portable by third-party developers are installed using a modified recovery environment. In addition to installing various packages, you can fully clean the memory of the device, to take the installed system, get root rights.

With the release of MIUI 9, the smartphones of the line 4 (Redmi 4, Redmi 4X, Redmi Note 4, etc.) and above, received an update to Android 7.x. The owners of the line 3 and below, the manufacturer decided to "not indulge" and updated only the version of MIUI to 9, and the Android version remained the same (5.x, 6.x). Those who are interested, how their smartphone will work on a more "fresh" version of the operating system, can put the firmware with a third-party MIUI or an informal firmware. On the website of the 4pda you can find many firmware for almost any, both official and unofficial.

Today we will look at the installation of the firmware MIUI 9 on Android 7.0 on the Redmi Note 3 Pro SE (KATE). The sequence of actions that will need to be done for firmware of any other Xiaomi smartphone, no different from those described in this article. The main thing is to download the firmware for your phone model.

For firmware informal firmware, TWRP will be required.

Before installing

We strongly recommended make a "backup" existing (working) system . If there is a custom recovery, creating a backup, as well as the recovery of data from it, will not be difficult. The created "backup" will allow you to quickly return the smartphone into a working state, if something goes wrong during the firmware, or simply this version of the firmware will be "buggy."

Downloading firmware

For example, download the firmware from the Epic ROM on Android 7.0 from the Sail 4pda.for Redmi Note 3 Pro SE.

The installation process of the firmware

Go to TWRP. Create a backup. We make wipe all except SD cards. Reboot your smartphone, it will not boot, because A system partition is formatted (a reboot is necessary, without it the installation of the firmware installation will be completed with an error). Press and hold the power button and "Volume +". The phone will reboot in TWRP. Now you can proceed to install downloaded firmware. In this article, we will not describe all actions in detail, because We have already published in which they told about how to create backup copies, install firmware, patches, etc.

The installation process takes for some time, after that you need to restart the smartphone and wait for the start of the operating system.

What are the differences of this shell from the official firmware MIUI

The first thing that rushes into the eye at the entrance to the "settings" is the item "O phone". Now he is at the very top and called "device".

The information displayed inside also has undergone changes.

An additional section "Muiu Laboratory" appeared, in which you can activate the improved search for photos in the gallery.

Increased the number of shortcuts in the notification curtain.

Added additional features in the telephone shutdown menu.

And the most interesting we are slipped finally. As stated at one of the MIUI forums, the performance of the Redmi Note 3 Pro smartphone with the Android 7 operating system should significantly increase and in the Antutu test the result should be about 90,000 balls. Check. Left - the result on Android 6, on the right - on Android 7.

Hello, dear friends!
Today, we will tell me how to establish Russian firmware on the Xiaomi Redmi Note 3 smartphone.
As far as we all know, this smartphone comes to your customers from the "Middle Kingdom", at the start of sales, with a pre-installed official firmware from the manufacturer, which includes only English and Chinese languages. Now we will try to limit our readers from this discomfort, told on the items that you need to do in order for your smartphone to appear Russian and Ukrainian languages.

Installing the Russian firmware on Xiaomi Redmi Note 3 on points:

1. First you need to install a fresh Chinese official firmware (link)
a) Make sure the charge of your smartphone is at least 50%
b) Install Drivers ()
c) go to the Flash Tool and click on the "download agent" and select the file "da_swsec.bin"
d) Select Scatter File, which is stored in the "Singed_bin" folder
e) In the top navigation menu, select "Options" -\u003e click on "Download" and check the availability of activated tank

2. After that, we need to install the Russian firmware (link). For this you should:
a) go to the folder "Redmi Note 3" and run Flash Tool
b) Click on "Download Agent" and select the file "da_swsec.bin" (if it is not selected earlier)
c) Select Scatter File, which is stored in the "Images" folder
e) In the top navigation menu, select "Options" -\u003e Click on "Download" and check the availability of activated checkbox
e) We return to the Flash Tool Main Menu and click on "DOWNLOAD"
i) Connect the turned off the smartphone with the clamp of the volume button "-" and keep until the load (yellow band) does not start
g) after installation you can close the program and prey the smartphone

The first switching on may take up to 5 minutes.

Vua-la! Russian firmware is installed. We wish you pleasant use!

All actions you do at your own risk. We advise you to carefully follow all points.

Video installation of the Russian firmware on Xiaomi Redmi Note 3

From uv. Andrei Kovtun

Instructions on how to establish custom TWRP recovery and obtaining R per smartphone x R 3 P. Instructions TWRP firmware X R 4 4 Firmware X R 4 P. x 4 3 32 4 Custom firmware To begin with, you need to install a fresh Chinese official firmware link. Firmware X R 4 P Castomnoy 4. Some actions on the installation of different firmware can. Firmware X R 4 P Custom 4, 720 firmware X R 4 p Custom 4, firmware X. Buy X R n 3 x R n 3 Pro x R n 4 Pro. Do not confuse with the X R N 3 P 5, 5 inches diagonally, you can buy it here and it looks like. Press the F button, after which the process of flashing the phone X R n 3 P. Custom and stock firmware on x R 4x C a 7. T x R n 4 P firmware 4 through. N OS on X R N 3 P 4 Custom firmware allows you to flash the archives for a custom recovery in the absence of it, as well as with blocked. Firmware X R n 3 4 Russian. X R 4 P Custom 4PDA firmware. In N 3, it is possible to insert 1 or 2, in N 3 P. DONAT on the development of the project, more instructions, descriptions of firmware and unlocking. As long as your bootloader is blocked, you can forget about custom, which means about 6 too. X R N 3 P 4P firmware. X 5 Castom firmware. How to install the firmware on the smartphone x R n 3. x 3 4 Firmware Instructions Firmware X R n p 4 firmware. In the air flies and trying to upgrade manually canceled and before the custom firmware was not

R N 3 P Official firmware 4PDA. X R n 3 p Informal firmware. First 8 item Incorrect address of the TWRP firmware file I corrected on. X R n 4x s Castom firmware. I bought here G Discount X R n 3 P P K Firmware Personal. For Phone X R n 3 P, both official stock firmware and custom original firmware based on official are available. This article is devoted to the firmware x R n 4x, installing TWRP on it and, as. Sooner or later, the standard firmware begins to bother or buggy, because most of the users begin. X R 3 P 4 Firmware X R 3 P 4 Firmware, X R 3 P 4 Firmware, firmware X. N OS on X R N 3 P 4 Custom firmware 4. I, like a considerable part of users, I am looking for a quality sound in that device, which is most often. Installation of custom recovery on X R N 3. X R n 3 P Discussion of 4PDA. Firmware of custom firmware on 3. Now install custom recovery without unlocking the bootloader has not been possible. M V Appendix from the company X to check on the authenticity of devices X. Custom firmware is an unofficial firmware. Comparison X R n 3 p or x R n 4. X 5 4 Custom firmware. X R n 3 p It is too early to discount with accounts, although there is. Watch the firmware overview of N OS from Huhu for X R N 3 P Library online video, there are many films, TV shows and a variety of video shows. X R N 2 Custom 4PDA firmware

R 4 4 Firmware Firmware X R N 4 4 G R 4 4 Firmware How to flash Xiaomi Redmi 4X? Questions and answers by key 4 4 firmware. Unlocking the phone, firmware of the official or custom firmware, Russification, uloader U. Note If you install custom firmware, so that you have services, etc. Firmware 3 4 Official firmware. U B VX R 4 P firmware MIUI 4PDA X. Preparation of root on X R N 3 P with the ability to update the air MIUI7, MIUI8. Question Tell me which custom firmware for x r n 3 p is the most stable? X R 4 P Custom firmware 4pda Overview of the smartphone X R 4 Pro. Firmware X R n 3 P 4. Firmware X R n 4 4 Castomnoe. Home Instructions How to install custom firmware on X R n 3 P K. x R n 3 P Unpacking and firmware on the international version. X R N 3 P Castomous firmware. S Galaxy C P SMG360HDs Summary of the X R 4 Pro smartphone on a custom firmware. N OS on X R n 3 P 4. Overview of firmware N OS from Huhuh for X R N 3 P.? Download N OS for. By the way, x R 3 you can flash the custom firmware without unlocking the bootloader, in the idea and N. Download the firmware itself to find it on the forums 4 or.

"This instruction is recommended for use by experienced and knowing users or specialists. This instruction will describe the smartphone firmware process, it is important to understand that during the firmware all the data on your smartphone will be deleted, and we are not responsible for the possible damage you can apply Your smartphone, all actions you do at your own risk. "

Loading Special Software for the Firmware of the Smartphone

1. By reference download the program for the firmware of the smartphone Miflash
2. By reference download "ADB" Android ADB-USB Unifl Driver - this is a driver for the correct connection of the smartphone to the computer
3. By reference download FastBoot EDL, it will be needed to translate the phone to EDL mode
4. According to the link we find from the list of Redmi Note 3 Qualcomm Latest Global Stable Version FastBoot and download the firmware for the Xiaomi Redmi Note 3 Pro smartphone

Download all these files and unzip. The firmware unzipped into the C disk on the computer, or to another place convenient for you, it is important that the path to the folder with the firmware contained Russian letters.

Computer preparation

Disabling Digital Signature Drivers

1. Open the "Start", and there already "Parameters"

2. Go to the "Update and Security" parameters section

3. Go to the "Restore" menu

4. After restarting the computer, we fall into the menu in which you select "Diagnostics" in other versions "Troubleshooting"

5. After restarting the computer, we enter the menu in which you select "Diagnostics" in other versions "Troubleshooting"

6. Select "Advanced Parameters"

7. Select the "Download Settings" item

8. And click the "Restart" button

9. In the one that appears, it is necessary to select item 7, for its choice, click the F7 key on the keyboard

After that, the computer will reboot, and you will fall on your "desktop".

Installing software

1. Installing Miflash.

Open the folder unpacked from the archive, and launch the file miphones.exe

Next, specify the folder where we want to install the program and click "Next" (Next)

During installation, windows with warnings can appear, we ignore them and click "Set this driver anyway"

At the end of the installation, click "Finish" (END). We installed Miflash program

1. Installing the ADB driver

Open the folder with the downloaded driver and find there two files with extension.exe

Setup.exe - for 64-bit operating systems
Setup_x86.exe - for 32-bit operating systems

We launch one of the files corresponding to the operating system, and the installation menu opens.
To start installation, click "Next"

The program will start the installation and will ask whether to set for this device.
We celebrate the "Bird" Item "Always Trust Software" and click "Install"

At the end of the installation, click "Finish", in the window that appears.
Drivers installed.

Phone preparation

1. For the firmware, you must translate the phone to the "FastBoot" mode, for this we turn off the phone. On the phone off the phone simultaneously press 2 keys ("Reduction of the volume" and the "Lock" button). The phone will curb and the picture should appear on the screen, as below.

After transfer to the "FastBoot" mode, connect the phone using a cable to the USB port of the computer (it is recommended to use USB ports from the back of the housing) or a laptop.

2. Open the folder "fastboot_edl" and run the eDL.cmd file. The phone will have to turn off and go to EDL mode, the "Search and Installing the Device Driver" can also begin, wait for this window closes.

Phone firmware

1. Run the Miflash program (from the folder where you previously installed it)
2. After clicking on the "Update" button (Refresh)

3. Now our COM 10 device will appear (the digit may be different)

4. Click "Browse" (Browse ...) and specify the path to the folder where the firmware is. After that we install the marker before "Flash All"

5. After that, press the "Flash" button and the device will start flashing

6. At the end of the firmware, we will see the following:

Device updated!

Exit EDL mode and enable smartphone

1. Disconnect the phone from the USB cable
2. Clee the lock button for 5 seconds, then release, and again cluster while the phone does not depend on and the inclusion process will begin.
3. After updating the firmware, the first launch of the phone will last about 10 minutes
4. When the phone turns on you to go through the "first inclusion" procedure