Firmware Xiaomi Mi3. Xiaomi Mi3 Firmware Xiaomi Mi3 Firmware 4.4 2

In order for your smartphone ChiaMi Rarre Third Generation (including the Note 3 model) all the time worked at the maximum performance level, you need to follow the latest changes in the software for it. Optimally, if fresh firmware is installed on Xiaomi Redmi 3, and it can be updated "by air". If the phone stopped being updated, you need to personally follow the firmware update for it.

With the advent of the new firmware Xiaomi Redmi 3, you will need to download it and install. But you need to be attentive, because from how you secure your smartphone, it will directly depend on the quality of its work. For example, many of those who independently reflash Siaomi's gadget, like an unofficial Russian firmware for Xiaomi Redmi 3, where some additions are made to the main functional package. True, you must be sure that you downloaded high-quality firmware and adhered to all the rules of its installation. Otherwise, even putting the original program, you risk harvesting the phone.

In any case, whatever the firmware you have decided to deliver, even nominally the best program is downloaded and installed under your responsibility. For further work of the gadget, it is not responsible for any manufacturer nor the software developer.

Today we will talk about how the Xiaomi Redmi flashing is performed correctly. 3. Follow these recommendations, and the result with a high probability will be good.

Download Miflash.

To install any new firmware, you need to initially download the program to the computer. Only after that, on the same computer, I download and the software version of the phone you have chosen.

You can download the global version of the firmware on the official website. If you want to install a Russian-speaking modified version, then check that the supplement in the form of the Russian language was the only difference from the official version of the software. A simple principle works here: the more changes, the greater the chances of the occurrence of bugs during the system operation.

Replacing the firmware is always in the download mode (download mode), in which you need to translate your phone before starting work. The transition to the bootloader mode is familiar with the mode of increasing the volume when the gadget is turned on. There you will see the inscriptions, mostly in Chinese, but the download is in English, like FastBoot.

Give gifts

Installation of firmware

Next, you need to connect the smartphone to the computer via the USB cable. The device must be detected in the MiFlash program. As a rule, it does not see his system immediately, because in the program window, click "Update". If everything is successful, and the phone is recognized by the system, we begin to flash it. For this:

Indicate in the Miflash path to the downloaded firmware;
Press the "Flash" button;
We are waiting until the new software is installed.

When the procedure is completed, reboot the gadget. If everything went successfully, you will see that on Xiaomi Redmi 3 firmware has changed, and you need to install the primary user settings.

Now you know how to flash Xiaomi Redmi 3 and how to update the irrelevant software. But you must adhere to the following recommendations in order to avoid unpleasant consequences:

You can reinstall the firmware unlimited number of times, even more than three per year, but make sure that it is minimally different from the official;
The third generation of Smartphones Xiaomi and the note model, including, often has a blocked loader. If it prevents you from making changes to the system, send an unlock request on the official website;
Before installing the new firmware, be sure to copy all personal data from the phone to a safe place, because they will be deleted;
Sometimes the phone software file may not be loaded, and the main cause becomes improperly recognition of the smartphone. He can see the gadget only as a drive of information, not a phone. Therefore, change the connection type, and everything will turn out.

Modern smartphones cannot be submitted without the main component of the operating system. It is she who reveals the user a huge potential of the smartphone, allowing a person to work as conveniently and dynamically and dynamically with a powerful device. Absolutely all smartphones are available from the conveyor, having a pre-installed operating system.

Users not satisfied with the standard firmware have the ability to install their own, having a computer and a clear set of programs and drivers at hand. The firmware through Miflash will help not only update the inner component, but also to correct a huge range of problems, among which the bootlup, constant system errors and the "oxiprified" apparatus.

What is needed for firmware

What will need to be in service with to successfully install a new firmware?

Computer running Windows operating system version 7, 8, 8.1, 10 of any bit ;
The program by which the firmware installation will be executed - (it will install all the necessary drivers to work). If you have installed an old version, before installing a new one, you must remove the old one.
The downloaded firmware you want to install on the phone. It must be relevant, stable and precisely approach specifically under your phone model. The firmware format should be ".tgz" if you have only ".gz", simply rename its format.
Your smartphone, its model should not be older than Xiaomi Mi3 and have a Qualcomm processor.

Installing Miflash.

Disable drivers check

For the correct computer interaction with the phone you need to have installed drivers on Windows. In order for them correctly installed in the system, you need to disable the function that checks the authentication of the driver installed - then the phone is flashed without problems.

For Windows 7, restart the computer. Immediately after loading BIOS, several times quickly press the F8 button (you may have another key), after a short time a list of additional commands will appear to boot the operating system. In the "Additional Download Options" section, select "Disable Mandatory Driver Signatile".

Remember this step, if, when executing this instruction, problems will be set with the driver installation, in the command line running on behalf of the command line each other and launch the following commands:

bCDEDITIT.EXE / SET LOADOPTIONS DDISABLE_INTEGRITY_CHECKS
bCDEDITIT.EXE / SET TESTSIGNING ON

After each command, check the computer's answer that the command is successful, then turn off and turn on the computer.

In Windows 8, 8.1 and 10 environments, hold down the SHIFT key on the keyboard, after which the mouse restarts through the button to the "Start" button. Follow the path by clicking on the "Diagnostics" button, "Advanced Parameters", "Download options" on the screen, "Reload". The system will restart, in the corresponding screen, the F7 button use the download option "Disable mandatory driver signature check".

Running Miflash.

Load the Miflash program. The archive must be unpacked in a predetermined folder with the same name on the path "C: \\ Android \\". To avoid the appearance of syntactic errors in all paths, use only the Latin, no Cyrillic, spaces and minimum characters.
Select the firmware you want to install. Load it to the computer, and unpack the archive in the above folder.
Run the executable program file. Agree with the start of installing drivers by pressing the "Next" button (if the installation does not properly look, view item 1). We have to wait some time until the files are unpacking and integrated into the system. After notifying the successful installation, close the program window by clicking on the "END" button.

Connecting a phone to a computer

We now turn to the phone. Take care that it is charged at least 50%. Turn off it in the usual way, then transfer to the "FastBoot" mode - enable it with a special key combination by closing the power button and the volume button at the same time. After a short time, an image with a bunny in the Ushanka will appear.

When the phone is in this mode, connect it to the computer. It is very desirable to use that wire that was included with the phone - this will provide the most stable connection. Beyond the lack of it - just take a wire of good quality. Insert the corresponding plug into the Xiaomi device, the other end is stuck into the USB 2.0 connector on a laptop or computer.
Run the command prompt in Windows on behalf of the admin. Using the CD C: \\ Android \\ command, go to the directory created earlier when installing the Miflash program.
We check the "friendship" of the computer and the phone - enter the FastBoot Devices command to the command line, after which the inscription appears, similar to XXXXXXX FastBoot (it will mean that synchronization has passed successfully). If WAITING FOR DEVICE is visible on the screen - you need to check if you have forgotten the phone, also check the power of the cable. As an option - re-install the drivers.

Command FastBoot OEM Reboot-EDL Move your smartphone to the special mode "Emergency Download Mode". At this time, the audio notification notifies the appearance of a new device on the computer. The synchronization of the devices is completed, you can start directly to the firmware.

Phone firmware

Open the Miflash program again. Click on the "Refresh" button, then using ".." Show the program folder wherever you put the necessary firmware.
Next, you must choose whether we will save the data available on the phone, or to delete everything. As a rule, the second option is recommended, then the firmware will be installed most correctly. Click on the "Flash All Expept Storage" button to leave the data on the phone, for full formatting, select "Flash All". After the selection made, click on Flash. The program then execute the selected action, and the Xiaomi Redmi 3S firmware will begin (or any other).

The speed of installation of the operating system depends on the size of the firmware itself, the speed of the cable and the rate of memory inside the machine. In any case, quite normal will be time spent from 10 minutes to 1 hour.
After completing the Miflash, the phone will independently reboot. If the automatic reboot has not been executed, you start the FastBoot OEM Reboot-EDL command at the Windows command prompt, or press and press the onscape button on the phone before the firmware sign appears on the display. Then carefully disconnect the cable from the smartphone.
After installing the new firmware, the phone will be loaded relatively for the first time. Depending on the technical nuances of the operating system, the load logo can hang from 5 minutes to half an hour. In exceptional cases, you can try to wait 1-2 hours, subject to the connection of the phone to the charger.

Possible problems

If no changes on the screen are not observed for a long time, try to remove the battery for 20-25 minutes, then insert it back and start the smartphone again. If it does not help, leave it on for a long time so that it fully discharged the battery (do not forget about the phone in this form quite for a long time, no more than 4-8 hours (depends on the battery capacity and its old age) to avoid serious problems with the battery). After the phone is turned off, connect it to charging and turn on again.

If the actions described above do not help, try installing another firmware, or reinstall the previously selected.

If the operation of the operating system does notify that there is not enough memory to perform this operation, try to repeat the instructions on Windows X64. If the battery is changed, it is not helped, you will have to use another very popular installation program - FlashTools.

If an error "Remote-Need to Unlock The Devices to Use This Command" appears, then you need to contact the official MIUI website asking unlock the bootloader to install the firmware, you can read the details.

Outcome

Following this instruction, any phone with a unlocked loader using Miflash can flash the appropriate Android operating system, which will help you quickly adjust the phone for the need for a single user. Correction of software errors, restoration of "bricks" or simply replacing the inner component of the smartphone, will help to use the phone in their direct intended purpose.

The theme of the firmware of the Xiaomi Mi Router router is very relevant for several reasons. The main thing is that all its interface in Chinese without any alternative. Therefore, in order to more or less understand what is written in the stock firmware, you need to install an additional extension to the browser. You can use, but uncomfortable. It would seem what these troubles are? Buy yourself another router with Russian localization and use. But low cost at large technical indicators and functionality of the router. Analogues from other manufacturers sold here are per thousand and more rubles more expensive.

What are the options?

Constantly use the Chinese version, as you understand, it is impossible. Therefore, I decided to make this leadership in which I will tell about two possibilities of the firmware of the router:

On official English
On the version of Padavan, or ASUS

This instruction is suitable for all models with a USB port - the Xiaomi Mi Router 3 firmware occurs just like MINI.

Official firmware router Xiaomi Mi WiFi 3 into English

So - how to translate Xiaomi Router 3 into English and no longer bother with constant with these endless spids.

The procedure is simple:

Download the English firmware Xiaomi
Download it to the router
Re-set up already in the English version

Xiaomi Mi WiFi Router router firmware from Padavan for ASUS

Another Chinese language solution in the control panel is to establish the custom version of the firmware on the Xiaomi router. The most successful today is the Padavan firmware, or as it is also called from ASUS by the name of the company for which it was originally done. The installation process is not the easiest, but if you do everything right, it will work out without any problems if you even know how to use the computer a little. Therefore, in this article, I tried to set out the entire process of updating on the router as much as possible on the example of the Xiaomi Mini model for your convenience.

To achieve the end result, we will need to flash Xiaomi Mi Router several times:

Install the original Xiaomi firmware for developers
Install the Pandora firmware
Install asus firmware

Firmware for developers

Let's start. First of all, we go to the Xiaomi download page in the "ROM" tab and download the "ROM FOR" package for your model (Mini, 3, 3C, 3G, etc.) from the right column is the official version of software for developers. With it, we will be able to control the deep firmware of the router.

Next, go to the adjustment of the router at the address, in the section "General Settings\u003e System Condition" and select the downloaded file for the firmware. In my screenshots, you will see the translated interface pages through the integrated Google translator built into Chrome - this is the most convenient to use the stock firmware. When working for convenience, use the cable connection of the computer to the Xiaomi router - it will not be necessary to connect to it at each reboot to it.

Refracting the router is occurring - at this time it cannot be turned off from meals.

Download the necessary files and programs

After rebooting the router, you again set it up for connecting to the Internet from your provider and go to the repository of the router club, where the craftsmen regularly lay out the latest Padavan firmware and not only in several different routers. Scroll down the pages and go to the folder with the last date.

In this folder we find another - XRM_BASE, it lies the desired firmware from ASUS, download it to your computer.

In the Personal Office Xiaomi Mi Router we find the number of your account - it is to the right of the menu next to the photo of the profile.

Click on the button with the hieroglyphs to the right of the password and then again in the pop-up window, also the right button - and download the file to connect the SSH protocol to Xiaomi Mi Router.

It must be placed on the pure, formatted in the FAT32 flash drive of 4 to 8 GB.

Finally, the last thing you need to download the software package from our storage for ASUS firmware.

Firmware from Pandora

We proceed to the firmware itself. We take out the power cable from our router, take the USB flash drive and insert it into the USB connector on the Xiaomi router.
Next, clamp the "RESET" button and insert the electrical power cable. We wait until the LED flashes in yellow and let go of the "Reset" button. If everything is fine, the LED will change the color to blue. If it becomes red, repeat all manipulations with a flash drive and a router first.

After that, run from the same archive the HFS.exe program from the same archive and add a Pandorabox.bin file to it. This is a virtual server that we run on the computer and from which we will firm the firmware on the router.

The next step is running the Putty.exe program from the same archive is an SSH client that will allow you to connect to the "insides" of Xiaomi. Drive in the address bar of the IP of the Router - 192.168.31.1. The remaining values \u200b\u200bare left as it is - and click the "Open" button.

A new dialog box opens, where we will first be asked to enter a login and password from the router - remember the information we received in your account on the Xiaomi website. Login - "Root"

and the password that the site issued you. When entering the password, the characters will not be displayed, so do not make a mistake. With a successful connection, a greeting from the Chinese will appear.

Next, drive the team " cD / TMP."- To get to a folder with temporal router files.
After that give the team " wGET link_Name_File_Program_hfs.exe.". In my case, it looks like "Wget http://192.168.151.1/pandorabox.bin"

Next, it is necessary to determine wherever it is in your particular device to install the firmware. This is done by the team " cAT / PROC / MTD". After it, a list appears in which you need to find one of the values \u200b\u200b- "Firmware", "OS1" or "FirmwareStub". There will be exactly one of them that we will use. I fell "OS1"

Now we carry out the team that will save our router to the version from Pandora:

mTD -R WRITE /TMP/pandorabox.bin OS1

Instead of OS1, as you understand, you can have Firmware or FirmwareStub

The router will start flashing, after which it will reboot.

Xiaomi Firmware from Asus (Padavan)

Now that Pandora rolled, run again HFS.exe and add the ASUS firmware file in it - the one that has downloaded at the very beginning from the RouterClub repository.

Downloaded. Now restart once again the PUTTY.EXE program and connect again to the router, now on a new IP, which is set in the new firmware - 192.168.1.1

Here we need to be updated to log in, for this we use the "root" login, the "admin" password.
Next, go to the catalog of the team again. cD / TMP."And pour into it the firmware firmware from Padavan - ASUS -" wget http://192.168.1.151/naping_file.trx"- The link again take from the HFS program.

After that, roll the firmware by the team " mTD -R WRITE /TMP/Nap_TRX FIRMWARE"- Note, here you already use the" Firmware "command at the end.

And we are waiting for the reboot of the router, after which in the browser, we recruit it IP - 192.168.1.1, for which we will get into the admin. For authorization, use a pair of Admin-Admin login password. To connect to a WiFi router to the Router Club network, use the "1234567890" password.

The reward of our long work will be a new administrator with many additional features that did not have in stock firmware. For example, the Mobile Modems Connection function and distribution of the guest WiFi network at 5 GHz will now be available, and this is only the most-minimum changes that have occurred.

I hope you, too, everything turned out!

For greater visibility, you give two video guides that step by step show the whole process. By the way, installing Podovan firmware on Xiaomi Mi Wi-Fi Router 3 and 3G has features from Mini - pay attention to it!

Padavan for MI Router 3 / 3G

For Xiaomi Mini.

How to return the official firmware on the Xiaomi Mi Router 3 router?

I used the Xiaomi router long enough on different firmware, but for many blog readers, the process of installing a third-party version is too complicated, so more often I still ask questions about how to work with Xiaomi routers in the usual official version of the admin. Therefore, I decided to return everything back and roll back the device to the original Chinese version to create a series of articles about the adjustment of the router, which is called, "out of the box."

Of course, I will share with you my experience, how to roll back from custom firmware to the official Xiaomi.
So, for starters, we go for Xiaomi routers. Here, too, everything will be in Chinese, so the last time we will use the browser translator built into Google Chrome.

After the page is readable, switch to the "ROM" tab to appear a list of routers to which there is a firmware.
We find our model in it and download any of the two versions of the software - Stable or Developer

The file will have some kind of name - we rename it in

After that, I throw a firmware file Miwifi.bin on it - in the very root and so that nothing else was on it.

disconnect the router from the power cable
insert a USB flash drive in its USB port
click the RESET pin pin
and at the same time with the joined button plug the power cord back
after 5-10 seconds, when the orange light flies, let go of the reset button

Xiaomi Mi3 16GB. Works under the operating system Android 4.2.. Its productivity is estimated at 5 out of 5 (in its segment). This smartphone is high-performance. Here are the characteristics of the device, instruction, how to make a reset settings, flash the device and, of course, how to get root rights to Xiaomi

ROOT on Xiaomi Mi3 16GB

How to get a root for Xiaomi Mi3 16GB See the instructions below.

Below are universal programs for obtaining root rights for devices on Qualcomm Snapdragon

(need a PC)
(Ruth with PC)
(Popular)
(root in one click)

If the superuser's rights (root) failed to get or did not appear (you can install yourself) - ask a question in the subject. It may take the firmware of the custom kernel.

Characteristics

Standard: GSM 900/1800/1900, 3G
Type: Smartphone
Operating system: Android 4.2
Case type: Classic
Number of SIM-Cards: 1
Weight: 145 g
Sizes (shXVXT): 73.6x144x8.1 mm
Screen Type: Color IPS, Touch
Touch Screen Type: Multitach, Capacitive
Diagonal: 5 inches.
Image Size: 1080x1920
Number of pixels per inch (PPI): 441
Automatic screen rotation: yes
Type of melodies: polyphonic, MP3 melodies
Vibrating alert: Yes
Camera: 13 million pixes., LED flash
Camera Functions: Autofocus
Video recording: yes
Max. Video Resolution: 1920x1080
Front camera: yes, 2 million pixes.
Audio: MP3, FM Radio
Dictaphone: Yes
Headphone jack: 3.5 mm
Video output: MHL
Interfaces: USB, Wi-Fi, Wi-Fi Direct, NFC, Bluetooth 4.0
USB-Host: yes
Satellite navigation: GPS / GLONASS
A-GPS System: Yes
Internet access: WAP, GPRS, EDGE, HSDPA, HSUPA, Email Pop / SMTP, HTML
Computer synchronization: yes
Processor: Qualcomm Snapdragon 800 MSM8974AB, 2300 MHz
Number of processor cores: 4
Video Processor: Adreno 330
The volume of the built-in memory: 16 GB
RAM size: 2 GB
Slot memory cards: missing
Additional SMS functions: Text Entering with a dictionary
MMS: Yes
Battery Type: Li-Ion
Battery capacity: 3050 mAh
Battery: non-removable
Sensors: illumination, approximation, gyroscope, compass, barometer
Search book: yes
Exchange between SIM card and internal memory: yes
Organizer: Alarm Clock, Calculator, Task Scheduler
Features: For the inner Chinese market with support for TD-SCDMA networks - Tourgeader processor Tegra 4 1.8 GHz
Announcement date (Mr.): 2013-09-05

Xiaomi Mi3 16GB Review

Xiaomi Mi3. - Strict relative to the design of the top smartphone, equipped with Hi-End "minced me", however, new chipsets have already come out, but it does not cancel the power of the 800th Snapdragon. Read about the advantages and disadvantages of the Chinese Dragon below.
Dignity:
Xiaomi Mi3 is pleasantly lying in his hand. It has high performance until noticed such that something does not go or terribly braked.
Design - strict and moderately stylish. The case is not "erased", the backlash was noticed.
Price - then sold for 15 thousand rubles, quite affordable price.
disadvantages:
There is no Russian language in official updates. Think use English modification Miui. (EN-LAN), yeah, where there! Some items are drilled in Chinese!
Quiet sound in headphones (normal quality)
Camera. Aggressively "rubs" noises.

Firmware for Xiaomi Mi3 16GB

Official firmware Android 4.2 [Stock ROM file] -
Custom firmware Xiaomi -

Siaomi Mi3 16GB firmware can be carried out in several ways. If the firmware file is not downloaded here, then create a topic on the forum, in the section, experts will help you, and add firmware. Do not forget to write a review by 4-10 lines about the smartphone, it is important. The official website of Xiaomi, unfortunately, will not help solve this problem, and we will resolve free. This model Xiaomi has on board Qualcomm Snapdragon 800 MSM8974AB, 2300 MHz, respectively, there are such wayproof methods:

Recovery - flashing right on the device
Special utility from the manufacturer or

We recommend the first method.

What are the Castom Firmware (Firmware)?

CM - Cyanogenmod.
Lineageos.
Paranoid Android
Omnirom
Temasek's.

AICP (Android Ice Cold Project)
RR (Resurrection Remix)
MK (Mokee)
Flymeos.
Bliss.
crdroid
Illusion Roms.
Pacman ROM.

Problems and shortcomings of a smartphone from Xiaomi and, how to fix them?

If MI3 does not turn on, for example, you see the white screen, hanging on the screensaver or only flashes alert indicator (perhaps after charging).
If it is hung when updating / hung on when you turn on (you need a flashing, 100%)
Not charging (usually, problems with iron)
Does not see the SIM card (SIM)
Camera does not work (for greater extent, hardware problems)
Sensor does not work (depends on the situation)

For all these issues, please contact (you just need to create a topic), the specialists will help free.

Hello! In this article we will talk about the powerful Chinese flagship from Xiaomi, which is called "Xiaomi Mi3". This device has a set of pretty powerful components, see:

5 inches screen with a resolution of 1080x1920 px.;
rear camera on 13 megapixel with autofocus and flash;
rechargeable battery with a capacity of 3050 mAh;
satellite navigation GPS / GLONASS;
set of standard communications (Wi-Fi, Bluetooth, etc.).

A smartphone is performed in two versions - 16 GB and 64 GB of internal memory. It is not possible to increase this space, not provided by the manufacturer, so it is better to immediately choose a phone with a large volume. Another problem of this device is the lack of Russian localization in the standard firmware version. But it has already become possible to correct this situation. Russian firmware for Xiaomi MI3 is available for downloading on the link below, download it and carefully study the installation instructions.

Firmware:

https://yadi.sk/d/oov4hcwofhihk.

Install the firmware on Xiaomi Mi3

Before proceeding with the "Update" operation, be sure to save all your data, contacts, SMS. Since we will deal directly with iron, there is a percentage of failures in the process of work, or other force majeure situations.

We connect the smartphone through the cable to the USB port of the computer.
You do not need to unpack the downloaded archive, simply copy it to the phone's memory (check the name of the archive - it must be update.zip.).
Disconnect Xiaomi Mi3 from PC. Turn off your smartphone.
Now we need to get to the engineering menu of the device. To do this, you clap the phone at the same time the Volume Enlarge key (Volume +) and device Enable key. As soon as the screen is blinking, the power key can be released, while continuing to hold the "Volume +". After the boot menu appears, you can release all the keys. Navigating the items is carried out using the volume control rocker, and the choice of the desired item is done using the power button.
Select the interface language English.
We make cleaning the system by selecting the command Wipe Cache..
Now you can proceed to the firmware Xiaomi Mi3. Select item Install Update.zip to System One And wait for the completion of the installation process.
After installation, you need to restart the system - select item Reboot.
Installation is completed, waiting for the system boot (the first launch can go a little longer than the usual).