Samsung washing machine 821. SAMSUNG BIO COMPACT S821 User Manual

This is the official instruction for AMOI N821 in Russian, which is suitable for Android 4.0. In case you updated your Amoi smartphone to more "fresh" version or "rolled out" to earlier, then you should try other detailed instructions to operate, which will be presented below. We also suggest familiarizing yourself with the fast user instructions in the format question - answer.

Official site amoi?

You hit the point, because all the information from the official website of AMOI is collected here, as well as the mass of other useful content.

Settings-\u003e About the phone :: Android version (several clicks on the item will launch an "Easter egg") ["From the box" version of Android OS - 4.0].

We continue to customize the smartphone

How to update drivers on Amoi

You need to go to "Settings -\u003e About Phone -\u003e Version of the nucleus"

How to enable Russian keyboard layout

Go to Arzde "Settings-\u003e Language and input-\u003e Select Language"

How to connect 4G or switch to 2G, 3G

"Settings-\u003e More-\u003e Mobile Network-\u003e Data Transmission"

What to do if you have turned on children's mode and forgot password

Go to "Settings-\u003e Language and keyboard-\u003e Section (keyboard and input methods) -\u003e put a tick opposite" GOVER Voting "

Settings-\u003e Screen :: Screen Motor Direct (Remove Tick)

How to install a melody for alarm clock?

Settings-\u003e Screen-\u003e Brightness-\u003e Right (increase); left (reduction); Auto (automatic adjustment).

Settings-\u003e Battery-\u003e Energy Saving (put a tick)

Enable battery charge status display in percent

Settings-\u003e Battery-\u003e Battery charge

How to transfer phone numbers from the SIM card to the phone's memory? Import numbers from SIM

1. Go to the "Contacts" app
2. Click on the "Options" -\u003e button Select "Import / Export"
3. Choose from where you need to import contacts -\u003e "Import with SIM card"

How to add contact blacklist or block phone number?

How to set up the Internet if the Internet does not work (for example, MTS, Beeline, Tele2, Life)

1. You can contact the operator
2. Or read the instructions for

How to install ringtone on the subscriber so that each number has its own melody

Go to the "Contacts" application -\u003e Select the desired contact -\u003e Click on it -\u003e Open the menu (3 vertical points) -\u003e Set ringtone

How to disconnect or turn on the vibro-block keys?

Go to settings-\u003e Language and input -\u003e Android keyboard or Google keyboard -\u003e Keyboard keyproof (remove or put a tick)

How to install a melody on an SMS message or change the sounds of alerts?

Check out the instructions for

How to find out which processor on N821?

You need to see the characteristics of N821 (the link indicates above). We know that in this modification of the device chipsets - MediaTek MT6577, 1000 MHz.

Settings-\u003e For developers-\u003e USB debugging

If there is no item "for developers"?

Follow the steps from the instructions

Settings-\u003e Data Transmission-\u003e Mobile Prafik.
Settings-\u003e More-\u003e Mobile network-\u003e 3G / 4G service (if the operator does not support, select only 2G)

How to change or add an input language on the keyboard?

Settings-\u003e Language and input-\u003e Android keypad-\u003e Icon settings-\u003e Input languages \u200b\u200b(puts the tick opposite the necessary)

Rembytte's workshop will eliminate the breakdown in your samsung s821gws washing machine right at home. We work in Moscow and daily from 8 to 22 hours. Therefore, you can call the masters at any time convenient for you - even late in the evening. Specialist "Rembattech" will come to you for 24 hours after a challenge and with a guarantee up to 2 years, it will repair the washing machine of any year of release.

Cost

With a preliminary estimate of the repair price of your typewriter you can find the tables below. It is broken into two blocks - according to the name of the work and on the signs of malfunction. The exact cost of eliminating the malfunction depends on the severity of the breakage and is determined only by the master during diagnostics.

Signs of malfunction	Repair time	Cost **
Departure of a specialist and malfunction diagnostics *	5-10 minutes	0 rub. * *
Does not merge	from 20 minutes	from 1000 rubles.
Does not warm water	30-60 minutes	from 1800 rubles.
Blink bulbs	from 20 minutes	from 1300 rubles.
Does not turn on, the power indicator does not burn	from 20 minutes	from 1400 rubles
Does not rotate drum	From 40 minutes	from 1100 rubles.
Does not gain water	From 30 minutes	from 1200 rubles
The machine creaks greatly and noise	From 40 minutes	from 1500 rubles.
Vibrates and jumps	From 40 minutes	from 1600 rubles.
Embroaches automatic	30-60 minutes	from 1800 rubles.
Water flows	From 30 minutes	from 1200 rubles.
No Pressing Lane	From 40 minutes	from 1100 rubles.
Does not open Luc	From 30 minutes	from 1700 rubles.
The door of the hatch is not blocked	From 30 minutes	from 1700 rubles.
Do not rinse underwear	From 30 minutes	from 1900 rubles.

Name of works	Repair time	Cost **
Departure of a specialist and diagnostics *	5-10 minutes	0 rub. * *
Replacing the power button	30 - 50 minutes	from 1400 rubles.
Replacing hatch handle	30 - 50 minutes	from 1600 rubles.
Replacing water pressure sensor	30 - 60 minutes	from 1700 rubles.
Water Level Sensor Repair	15 - 40 minutes	from 1100 rubles.
	30 - 50 minutes	from 1600 rubles.
	15 - 40 minutes	from 1100 rubles.
	30 - 50 minutes	from 1400 rubles.
	40 - 70 minutes	from 1900 rubles.
	30 - 60 minutes	from 1800 rubles.
Extract a foreign body from the tank	30 - 80 minutes	from 1500 rubles.
	30 - 60 minutes	from 1700 rubles.
	30 - 80 minutes	from 1400 rubles.
	40 - 80 minutes	from 1900 rubles.
	60 - 180 minutes	from 3000 rubles.
	30 - 70 minutes	from 2200 rubles.
	40 - 80 minutes	from 2300 rubles.
Engine replacement	40 - 80 minutes	from 2300 rubles.
	40 - 80 minutes	from 1600 rubles.
Replacement of the drum	60 - 180 minutes	from 3700 rubles.
Replacing temperature sensor	30 - 60 minutes	from 1200 rubles.

* When repailing from repair, the "Rembyttech" master needs to pay the amount in the amount of 400 rubles. For diagnostic

** The cost of repair is indicated only for work, the price of spare parts in the rates is not included

How to call masters at home

Create an application for repairs can be 2 ways. First, from 8 to 22.00 daily by phone:

7 (495) 215 – 14 – 41

7 (903) 722 – 17 – 03

And secondly, with help on the site. Please indicate:

• Mark and model machine.
• Signs of malfunction. For example, the washing machine creaks during annealing or drum washing does not rotate.
• Suitable for you repair time.
• Name, address, telephone.

On the designated day of repair, the master will contact you at the specified number to clarify the time of arrival.

If the first signs of breakage, do not slow down with the repair of your Samsung S821GWS. Otherwise, this can lead to fatal consequences for the washing machine. Better immediately call "Rembytte"! The experienced master will come to the challenge for 24 hours after your appeal and repairs a faulty unit with a guarantee so that the machine will serve you for a long time.

Type of washing machine
Dimensions	Packaged	W 680mm x D 478mm x H 892mm
	Clean	W 598mm x D 340mm x H 844mm
Water pressure	50 Kpa ~ 800 Kpa
Weight	Packaged	58 kg
	Clean	55 kg
3.5 kg of dry linen
Power consumption	Wash	220 B.	110 W.
		240 B.	110 W.
	Washing and heating	220 B.	900 W.
		240 B.	1050 W.
	Spin for models at a voltage of 220-240 V	S821	S621
		200 W.	170 W.
	Drain pump	34 W.
Water consumption	43l (Standard Cycle)
Express speed	Model	S821	S621
	rpm	800	600

1-1. Precautions

1. Do not allow the client to independently repair the product.

◊ This can cause client injury or product damage when the device is served by unqualified personnel.

2. Disable power to the device before servicing.

◊ It should be remembered about the possibility of electric shock.

3. Do not use tees and extension cords.

◊ The electrical outlet can be overloaded, which can cause overheating.

4. Check if there is no damage on a fork or outlet.

◊ Replace them immediately, if there is damage. (This can lead to electric shock or fire)

5. Make sure the product is securely grounded.

◊ The absence of grounding can cause electric shock.

6. Do not use water and means based on the internal elements of the product.

◊ This may cause electric shock / fire or shorten the life of the product.

7. Wire harnesses must be dry and properly connected during repair.

◊ It is necessary to exclude any external impact.

8. Remove dust and dirt in the product, especially from electrical components and connections during maintenance.

◊ Protection against fire opportunity due to breakdown, etc.

9. Check if there is a footprint on electrical parts, connections, etc.

◊ Replace parts and / or wipe dry water.

10. Check the correctness of the assembly after maintenance.

◊ Check that the product was assembled at the same condition as before servicing.

11. Do not pull the power cord, disconnect it only while holding for the plug.

◊ Beware of electric shock or fire when damaged the power cord.

12. Disconnect the power cord from the outlet if the washing machine is not used.

◊ Beware of electric shock or fire during thunderstorms.

13. Do not use and do not place combustible materials (including gasoline, alcohol, solvents, etc.) next to the washing machine.

◊ The flammable materials can call an explosion or fire from the spark.

14. Do not put tanks with water or wet linen on the washing machine.

◊ This can cause electric shock or fire, or reduce the life of the product if the water penetrates the washing machine.

15. Do not install a washing machine in a place where it can be exposed to snow or rain, etc.

◊ This can lead to electric shock or fire and reduce the life of the product.

16. Do not press the control buttons with sharp objects, such as pins, needles, etc.

◊ This can lead to electric shock or other problems.

17. Check that the washing machine is aligned horizontally on solid floor and installed correctly.

◊ Vibration can shorten the life of the product.

18. Always use connectors for connecting wires.

◊ If the wires are connected without connectors, it can lead to short circuit.

19. When servicing and opening a washing machine, put a notebook on the floor and tilt slowly on the side.

◊ If the washing machine is placed on the front panel, the internal components may be damaged.

2. Safety devices

• We use 5 device security devices so that the work of the washing machine is safe.

1) Balancing device (control module)

• With uneven linen layout, to prevent noise and vibration, the imbalance detection sensor helps evenly decompose underwear and continue the press process.

2) overflow protection device

• The device is triggered as soon as the water level exceeds 2/3 of the level of the door, the water supplied begins to merge automatically, the error message is issued on the panel.

3) Adjusting Temperature Devices (Termistor)

• To prevent exceeding the displayed temperature, the thermistor constantly measures the water temperature in the machine and ensures the operation of the machine at a user-defined temperature.

4) overheating protection

• If the thermistor or incorrect work is malfunction, if the Ten overheats, the built-in protective thermo fuse automatically turns off the power, ensuring safe operation.

5) Function protection function from delicate tissues (control module)

• To protect clothes from delicate fabrics, the car controls the temperature of the water incoming to the water tank. If the temperature is above 50 ° C for wool cycles and "delicate wash", the machine will decrease the water and an error message will be issued on the panel.

Fig. one

Fig. 2. Location of the components of the washing machine

4. Control panel

Fig. 3. Control Panel

1. Detergent tray
2. Indicator panel
   Displays the stroke and error messages on LED lamps.
3. Washing program selection button
   Click the button to select one of the six available washing programs.
   (Cotton. (Cotton) Synthetics. (Synthetics) Delicates. (Delicate) Quick (Fast). Rinse + Spin. Spin. Cotton).
4. Temperature selection button
   Press the button several times to switch the available water temperature options.
   (Cold, 40 ° C, 60 ° C and Bio 60 ° C).
   * Bio 60 ° С: To increase the efficiency of washing, heating for 30 minutes.
5. Spin speed select button
   Press the button several times to switch the available drum rotation speed options during annealing.
6. Start / Pause
   Click to pause and restart the program.
7. (ON / OFF) button (on / off)
   Press once to turn the washing machine, click again to turn off the washing machine.
   If the washing machine remains turned on by more than 10 minutes without any actions with the buttons, the power is automatically turned off.

5. Basic functions

1) Avtovdunction function

• After turning on the autotrunct function automatically turns off the power, if you do not press the function selection button for 10 minutes
• After selecting the function, the autotrower will automatically turn off the power, if you do not press the start / pause button for 10 minutes
• 5 minutes after the end of the last function, the autotrunnel will automatically turn off the power, if you do not re-press the function selection and start button.

2) Door opening control function

If the door is open during the work, all operations are suspended, and an open door error message will be displayed and an error sound will sound.

The door opening error can be eliminated by closing the door. The work of the car will continue with the interrupted place.

3) Function of work without press

• If this feature is selected, the work will be completed after the last rinse.

4) Electricity Power Supply Compensation Function

• If there is a power in the process of operation, the work information will be stored in the memory of the machine (EEPROM) as only the power will be restored, the work will continue.
• When the food is restored, the washing machine will start working from the interrupted place, for rinsing / drain, the process will begin again.

Fig. four Function Compensation Function

5) Water Heater Verification Function (TEN)

1. This feature starts working when the TEN works incorrectly (the function begins checking the heater after 1 minute starts the heater)
2. The initial value (A1) of the thermistor compared with the value (A2) of the thermistor after 2 minutes (Y \u003d A2-A1)
   - If after 10 minutes the temperature difference (y) is less than 2 ° C, the LEDs light on the panel 40 ° С / bio60 ° С».
3. The initial value (A1) of the thermistor compared with the value (A2) of the thermistor in 2 minutes (Y \u003d A2-A1) - if in 2 minute the temperature difference (y) increases by more than 4.5 ° C (0.2148V), on the panel LEDs light up cOLD / BIO60 ° C».
4. In this case, in case of error " 40 ° С / bio60 ° С"(The heater does not work) and" cOLD / BIO60 ° C"(Overheating) messages are displayed on the display, and all workflows stop.
5. The heater's effect continues during the time provided by the program, if the heating is canceled, the rest of the wash continues to go without heating.

6) fuzzy washing functions (determining the amount of linen)

• After the initial stage of the bay of water, the underwear absorbs part of the water, the water level falls, the need for additional topping the water before stabilization of the level occurs.

By the number of additional water plots, the processor determines the amount of loaded linen and after stabilizing the water level begins washing. In the modes "Cotton", if additional fuel topping occurs more than 3-4 times, the processor sets the default "high water level", if the water topping was 1-2 times, the average level is set, if 0 is a low water level. The heating time and rinse time depends on the above data.

* After determining the amount of linen, the washing time decreases relative to the default time

7) Excess Foam Detection Function

At each stage of washing, draining, rinsing and pressing, the foam detection function works. The detection of excess foam up to 5 times does not cause changes in operation mode. If the machine detects a foam 6 times, the excess foam function stops the current operation and the machine proceeds to the next process.

● Foam detection function during washing, rinse to spin and annealing, after 2 times instantaneous dehydration turns on if the water level is below 25.45 kHz, foam

The function detects the presence of foam and adds additional rinsing to remove foam, it increases the washing time for 6 minutes 40 seconds.

The foam detection function also works with separate annealing. Under annealing, after 2 times instant dehydration, the function turns on if the water level is below 25.45 kHz or if the water level is registered below 23.80 kHz, and 1 time the rinse is started to remove the foam, it increases the cycle time for 5 minutes 50 seconds.

Fig. five The operation of the function of determining excess foam.

8) imbalance detection and linen layout function

1. The function of determining the imbalance and laundry layouts is turned on before spinning.
2. At first, the drum rotates 6 seconds at a speed of 50 rpm for laying linen.
3. The next 10 seconds, the speed of rotation slowly increases from 50 rpm to 90 rpm
4. Over the next 18 seconds, the drum rotates with a speed of 90 revolutions per minute, the processor determines the degree of imbalance of the linen on the engine tach generator.
5. By default, linen is balanced if necessary 6 times if the balancing failed, the system repeats balancing another 6 times.

6. Technical parameters

1) electric motor operation in each mode

2) Rotation speed with final annealing with different modes (rpm)

* You can change the spin speed by setting the revolutions less than indicated in the table using the spin speed button, up to refusal.

3) water level sensor parameters in each mode

	Water level	The default water level (kHz)		Additional water level Start (kHz)	Additional water level End (kHz)
Mode
Cotton	Wash	23,50		24,00	23,70
	Rinsing	large	22,45	24,00	23,50
		middle	22,80
		small	23,80
Synthetics	Wash	23,50		24,00	23,70
	Rinsing	22,45		24,00	23,50
Delicate	Wash	22,80		23,55	23,35
	Rinsing	22,65		23,55	23,35
Quick wash	Wash	23,50		24,00	23,70
	Rinsing	22,45		24,00	23,50

5) Water level sensor parameters in intermediate modes

* If the water level sensor gives less than 15 kHz or more than 30 kHz, it must be replaced.

7. Function for issuing error messages

When an error occurs, this function begins to give an error melody and displays an error message as shown below, flashing indicators with an interval of 0.5 seconds before removing the error.

In this case, all driving devices are turned off until the error is eliminated.

Error indication shows Fig. 6-1

Fig. 6-1

• The bay of water bay occurs when the water level does not cause changes in the press length frequency by more than 100 Hz / min or water does not fill up to the pre-installed level for 20 minutes from the moment of the initial bay.

Error indication shows Fig. 6-2.

Fig. 6-2.

• Occurs if the frequency of the pressostat (water level) is 24.5 kHz or less in the initial phase of the foam detection cycle
• The error status can be reset by turning on and off the power supply (Power S / W OFF button).

Error indication shows Fig. 6-3.

Fig. 6-3.

• Overflow error occurs when the water level differs from the cycle specified in the cycle. The error status can be reset by turning on and off the power supply (Power S / W OFF button).
  Water will be merged with a drain pump for 2 minutes before turning off the power or before reaching the frequency of the pressostate more than 24.5 kHz.

Error indication shows Fig. 6-4

Fig. 6-4

• Lingerie is not balanced, decompose the underwear evenly.
• An error may occur if only one piece of clothing is loaded. The end result may be unsatisfactory spin, and an error message is displayed on the panel display (Fig. 4).

Error indication shows Fig. 6-5 and fig. 6-6

Fig. 6-5

Fig. 6-6

• An error may occur if the water temperature increased by less than 7 ° C after the heating element is turned on.
• The error status can be reset by turning on and off the power supply (Power S / W OFF button).

Error indication shows Fig. 6-7

Fig. 6-7

• Error can be eliminated by closing door

* Press length generated frequency depending on the water level

Level	Low level	High level
Incorrect frequency	\u003e 30 kHz	<15 кГц

If the frequency specified in the table above is registered for more than 5 seconds, the press service error occurs.

• When this error occurs, the plum pump will operate for 3 minutes. And then stop.
• After that, the display shows the press service error (Fig. 6-8).

Fig. 6-8

• It occurs if the temperature of water is 50 ° C or more in the cycles "delicate wash" and "wool".
• At the time of the initial water bay, if the water temperature does not correspond to the cycle, water will be merged with a drain pump for 2 minutes until 24.5 kHz appeared on the press service.

Error indication shows Fig. 6-9

Fig. 6-9

• The error status can be reset by turning on and off the power supply (Power S / W OFF button).

9. Error Water Leakage Error (E9)

Error indication shows Fig. 6-10

Fig. 6-10.

• water leak error occurs when water leaves without the help of a drain pump after launching the washing program.

Error indication shows Fig. 6-11

Fig. 6-11

• This error occurs in the event of a failure of the engine tachogenerator or tachogenerator issues less than 2 per second
• The error status can be reset by turning on and off the power supply (Power S / W OFF button).

Error indication shows Fig. 6-12.

Fig. 6-12.

• This error occurs if the tachogenerator registers more than 300 imp. 1 sec after the voltage to the engine.
• The error status can be reset by turning on and off the power supply (Power S / W OFF button).

Error indication shows Fig. 6-13.

Fig. 6-13.

• This error occurs when the thermostat is defective or voltage on it less than 0.2V or more than 4.5 V
• The error status can be reset by turning on and off the power supply (Power S / W OFF button).

8. Troubleshooting.

8-1. Problem search and analysis

All electronic control machines have self-diagnostic agents, facilitating repairs. Below is information for accurate diagnostics of problems.

Security warning for repair and replacement operations

Please follow the instructions below when diagnosing problems and repair.

1) Since some electronic components of the machine are dangerous high charge of static electricity, it is necessary to remove the difference in potentials, snoring the power plug tool with an insulated handle.

2) Since for Simistors T1 and T2 on the control module, an alternating voltage of 220 ~ 240 V is used, the electric shock may occur when they tap these elements. Therefore, it is necessary to be extremely careful, since the power chains and control circuits are near.

3) The control module of the washing machine is a fairly reliable element and rarely fails. Do not change the control module if all peripheral devices are not checked most carefully, even if self-diagnosis does not work as usual.

	Symptoms	Causes and elimination
	no power	Control module connectors are connected normally? Network voltage normally? Power supply connected well? Is the interference filter connected normally? Is there a secondary voltage at the output of the power converter? Fuse in the cliff? (option)
	No water supply	Water supply crane is open? Do you press the start / pause button after selecting the mode? Connectors and wires of water supply valve normally? Water supply valve winding whole? If the above questions did not allow localize a malfunction, the control module failed. Replace it.
	After stopping the Bay of Water Washing does not begin.	Connection and operation of the pressure relay is normal? Is there damage on the pressure relay tube (leakage)? Pressure relay tube clogged? Check out the water level relay. If the above questions did not allow localize a malfunction, the control module failed. Replace it.
	When washing, the drum does not rotate.	Drum belt and dressed correctly? Engine windings are well? (Rotor winding, stator winding, tachogenerator) Thermal engine protection is good? If the above questions did not allow localize a malfunction, the control module failed. Replace it.
	During washing, the drum rotates only in one direction.	The control module has failed, replace it. (Relay Relay Fault)
	Problems with the drain	In the drain path there are blockages and gears? The winding of the drain pump is good? Flusted water filter clogs garbage? After replacing the drain pump, the problem remained? If the above questions did not allow localize a malfunction, the control module failed. Replace it.
	Sociable problems	Discovered imbalance. Lingerie to decompose evenly and start all over again.
	Abnormal noise when ticking	Nut pulley weakened? Transport bolts removed? Machine installed in terms of solid base? (Minor noise may occur during a high-speed spin.)
	When washing, the differential automatic machine (UZO) disables the machine.	Use a rosette with ground contact, check ground. Check the correctness of the selection of the machine standards. To check the possible breakdown of the TEN on the body, turn on the washing in cold water. If the machine does not turn off - the TEN is not good Check all the electrical components of the machine on the insulation test.
	No heating	Contacts TEN? TEN FIVE? If the above questions did not allow localize a malfunction, the control module failed. Replace it.

8-2. Search for control module faults.

8-2-1. Power Supply

Fig. 7.

8-2-2. RESET (Reset)

Fig. eight Scheme Reset.

8-2-3. Interrupt (Interrupts)

Fig. nine

8-2-4. Tax frequency generation check

Fig. 10 Clock generation node diagram

8-2-5. Checking drivers schemes

Before checking drivers, make sure there is a voltage DC 5V. on the processor. For example, when the drain does not work, but the drain pump is correct, you need to check the voltage of 5V on the processor.

Fig. 12

8-2-6. Verification of the drive motor driver

Fig. 13 Engine driver node circuit

8-2-7. Checking the driver of the tachogenerator driver

Fig. fourteen Taggererator node scheme

9. Test mode.

Fig. fifteen Buttons control running service test

9-1. Log in to test mode.

BUT. Holding the "1" and "2" keys simultaneously, press the Power button "4".

B. Starting the test mode is performed by pressing the "3" button to the right.

9-2. Passage of test mode.

Bay valve inc (0.3 sec)\u003e off (0.3 sec)\u003e Drain pump incl (0.3 sec)\u003e off (0.3 sec)\u003e Motor left incl (0.3 sec)\u003e off (0.3 sec)\u003e Motor right incl (0.3 sec)\u003e off (0.3 sec)\u003e Relay tan incl (0.3 sec)\u003e off (0.3 sec)\u003e The door is open (work continues if the door is closed)

10. Description of the main components

10-1. Normal / reversible engine rotation and speed control

Fig. sixteen

10-2. Lock lock device

When the control unit serves the "Door Door" command, voltage is fed to contacts [N] and [L]The door remains closed all the time of the machine. Inside the lock device, an electromagnetic or bimetallic element is installed, holding the doors closed, while the contacts are closed [FROM] and [L].

Fig. 17.

10-3. Heating element (TEN)

Fig. eighteen

1. Power: AC 230V / 800W
2. Location: bottom of the tank
3. Purpose: Increase water temperature when washing.
4. Resistance: 62.63 ~ 69.22 Ω
5. Thermal stitch: 128 ° C

10-4. Water Detergent Distributor and Water Valves

The detergent distributor consists of a housing and 3 trays. The water supplied is poured into 3 tray with detergents depending on the current process. Water supply valves consist of a warm water valve (1 direction) and cold water valve (3 directions).

10-5. Shock absorbers and springs

This washing machine is equipped with 2 shock absorbers and 2 buffer springs. 2 shock absorbers are located below the tank, 2 buffer springs are located on the right and left at the top of the case, the tank is hanging on the springs. During washing, pressing shock absorbers absorb vibration caused by imbalance of linen.

Fig. nineteen

10-6. Tank

Fig. twentyBearing and glands

Control module diagram

Fig. 25.

12. Installation of the washing machine.

12-1 Removing transport bolts

1) Remove 3 transport bolts that ensure the safety of the machine during transportation.

2) Insert the plugs into the openings of transport bolts.

* Do not throw out the transport bolts and wrench, you will need in the future for the safe movement of the washing machine.

Attention! You must remove transport bolts before use. If you do not delete them, strong vibrations will occur that can damage the car.

12-2 Alignment of the washing machine in terms of level.

With the help of the level, adjust the horizontal position of the left and back and forth.

12-2-1 initial condition

1) Adjustment legs pressed to the bottom of the machine when the machine leaves the plant. This condition is ideal for low vibration and noise.

2) When you initially install the machine or its move, unscrewing 4 legs adjust the level of the machine and tighten the lock nut.

12-3 Installation of the washing machine

3) The machine must be installed on a solid base. (Do not use fragile material or slippery materials such as laminated paper)

12-4 Sizes

Fig. 28. dimensions

Fig. 29. Side view

When the door is open, the distance between the door and the back is 760mm

Fig. thirty View from above

When the door is maximally open, the distance between the edge of the door (1) and the left part of the washing machine (2) 255 mm

Maximum door opening angle (3) 170 °

13. Disassembly and assembly

13-1. Top panel.

Fig. 31. Removing the top panel.

1) Remove the two screws fastening the top panel on the back side.

2) Slide the top panel for 15 mm and lift it up.

3) Removing the top panel may be needed to replace and maintain the control panel, pressure sensor, a network filter, water bay valve.

13-2. Front Panel

Fig. 32. Removing the front panel.

1) Remove the top panel remove the waste dispenser tray.

2) Remove the two screws of the front and screw control panel on the right side.

3) Remove the lower front cover with a flat screwdriver.

4) Press the handle and open the door.

Fig. 33. Removing the spring clamp of the hatch cuff.

5) Remove the spring coat of the hatch cuff mount.

6) Unscrew the eight screws for fastening the front panel to the housing.

7) Removing the front panel may be needed for replacing and maintaining a heater, pump, shock absorber and hatch lock devices

13-3 belt

Fig. 34.

1) Remove the top panel.

2) Replace the belt.

3) Check that the belt is located in the center of the motor pulley.

Take the belt on the motor pulley (1) and pull it around the pulley (2).

13-4. Engine

Fig. 35.

1) Put the car on the left side.

2) Disconnect the harness with the wires from the engine.

3) Unscrew the engine mounting bolt on the back side.

Washing machines from the Korean brand Samsung S821 series are represented by several models. The characteristics of the models are very similar. Now cars are removed from production.

Appearance and parameters

SAMSUNG FUZY S821 washing machine - a small machine with parameters:

• height 84 cm;
• width 60 cm;
• depth 34 cm;
• weight is 55 kg;

At the same time, the tank for loading linen is designed for 3.5 kg. Having sizes and characteristics, Samsung S821 can easily fit even in a small room. In addition, due to its appearance, it will perfectly complement any interior as shown in the photo.

All about washing machine

SAMSUNG S821 Compact washing machine with front loading of things has the following characteristics:

• convenient push-button control in the top of the front side;
• it has different accelerations during annealing and comes up to 800 revolutions;
• has a selection of temperature regime in which the washing process should pass;
• installed a special program for regulating the balance of linen;
• it has additional fast washing programs.

Small tricks when installing and commissioning

When working with a washing machine, Samsung S821 will help the instruction:

• before purchasing a washing machine, it is necessary to prepare a place in advance where this household appliance will be installed;
• installation can be made with your own hands, since this process is not so complicated, however, if difficulties occur, it is better to use the services of a professional;
• unscrew the transport bolts;
• after reading the instructions, adjust the legs;
• if the water supply hose for some reason does not suit his length, it is best to immediately replace it with the desired (you have to spend and buy it separately);

• all connections must be sealed;
• the plum hose must certainly be supplied to the sewer pipe and to avoid unpleasant odor and water leaks, it should be fixed in the pipe with a special transitional clutch;
• for the work of the washing machine, Samsung S821 needs a socket, so you should not use extension cords;
• making sure that the SAMSUNG BIO Compact S821 washing machine is correctly installed and is connected, it is necessary to run a test wash without linen.

The instruction is registered the entire subsequent work.

For buyers from Russia it is convenient that the entire control panel in Russian. Despite this, the instructions still need to read.

Helpful information

When the Bio Compact Fuzzy S821 washing machine breakdown, you should not hurry to cause masters. Diagnose malfunctions in the machine and make repairs and do it yourself.

Looking at the proposed video, you can understand how and where:

• swap bearings, belt;
• diagnose other breakdowns;
• correct the spare parts;
• install spare parts;
• acquire a belt for the washing machine Samsung S821 FUZZY, bearings and other parts;
• learn about the weak and strengths of this washing machine;
• correctly care for the washing machine Samsung Fuzzy S821.

To proceed to independent repair of the washing machine, you need to have at hand, in addition to spare parts and bearings, the necessary tools consisting of different types of wrench, pliers and a special sealing mass.

Provided that with their own hands, with the help of this instruction, it will not be possible to repair, it is necessary to immediately stop the further operation of S821 and contact the service center.

What to do to extend the service life of technology

Simple instructions are registered in each instruction, but often they are simply not read, but in vain. These simple advice will extend the service life of any washing machine, including Samsung Bio Compact S821.

So, it follows:

• Strictly observe the mass of the loaded linen. It is not necessary to overload the drum by extra kilograms - this leads to a rapid wear of the motor, which is no longer subject to repair.
• After operation, you should open the door to the machine and give moisture to milder.
• Instead of standard funds from scale, it is possible to add citric acid during each washing or once a month, without linen, launch washing at a high temperature, adding it instead of a washing powder.

• Select the required mode of operation during each washing.
• Observe the dosage of detergent gels, air conditioners and powders.
• Follow the SAMSUNG FUZY S821 machine to be correctly installed and did not jump during operation.

This model of the washing machine has a lot of reviews, among which most positive. Most users have the S821 series machines for more than 10 years.

A type	Internal Bearing (a)