How to make an image more in size. Increase the image without loss of quality

And its interface is understood even in an inexperienced user.
Install Paint.Net, run it, open the picture whose size needs to be changed. To do this, go to the "File" menu - "Open". After the picture opens, select the "Image" on the toolbar - "Change Size". In the window that appears, select "Percentage" to change the image resolution in the percentage ratio. If you want to get a predetermined resolution, for example, 800 pixels in width, select "Absolute Size" and enter the desired parameters. Put the checkbox at the option "Keep proportions" so that the picture does not stretch and not fightened.

A picture with a new resolution is ready. In order not to lose the source file, which may be useful in the future, do not overwritten it, but select "File" - "Save As" and save the resulting picture with a new resolution in the format you need at any convenient place, for example, on the desktop or In the "My Images" folder.

note

Do not try to improve the quality of the picture, increasing the resolution, in other words, do not make a large image of the big. This will only lead to the blurring and fuzziness of the picture.

Sources:

• how to change the pictures

Change the size of photographs and drawings to users of the Internet is quite often. Too large image size is not suitable for posting them to the network, it will increase the download time and will take too much resources and traffic. How to quickly and effectively reduce the size of pictures, photographs and other images without loss of quality? Your work can significantly facilitate a free program called Fotosizer, very simple to use and quite functional.

You will need

• Fotosizer.

Instruction

Your work can significantly relieve the free called Fotosizer, very used and quite functional. Download the program and install it, then open the several of which you want to reduce in it, using the Add Image command.

If you want to reduce to the same size, several photos, such as a set of pictures from some kind of event, click Add Folder. Thus, you add a whole folder to the program to which changes will be applied.

In the Resize Settings section, select Units of Measurement (better use pixels), and then specify the width and height of the picture you want to get. If you do not want to specify your own sizes, click Preset Settings, and the program itself will offer you several options for finished sizes. There is also a quality change parameter - you can specify the percentage of quality that will have ready-made images.

Next, select the folder in the settings to which the ready-made files will be saved, and also specify, in which format you need to save them. Most often it is the same format, and nothing to specify nothing; But if you want to change the format of photos, mark this item in accordance with the expected.
The configuration process will take you no more than five minutes, you will leave the start button and get a whole package of ready-made reduced photos.

Speed \u200b\u200bon your digital chamber gigabytes of photos, and now you want to show their friends from other cities and countries? Decided to register in one of the social networks, but is your photo of a certain size? Or you found a convenient online digital shutdown service, but the speed of your Internet does not allow "shipping" too heavy files? Output One: Enable Photoshop Program on your computer and make a couple of simple operations with your photo users.

You will need

• - digital camera
• - a computer
• - Adobe Photoshop CS4 (or CS4 Extended) program

Instruction

In the "Image" menu, click on "Image Size". Before us now - the window of the same name.

At the top of this window - an indicator called "Size" (Pixel Dimensions), in the bottom - "Print Size" (Document Size). We are interested in two that they are at the top of the windows and meaning the width (width) and height (height) in the pikestones. These indicators need to be changed. The optimal width of the frame for in - 500-800 pixels. Drive any of these numbers in the "Width" string. The number "height" will change automatically and proportionally.

Now in the same window, click on the OK button located on the right. Now save changes in the file. In the "File" menu (File), select "Save As). Select the most common JPEG format, the highest quality (high quality) and a place on the computer, where the modified photo will be saved, ready to download the Internet.

Helpful advice

The number written in the dialog box exactly opposite the words "dimension" (Pixel Dimensions) means how many megabytes "weighs" file.

If you do not plan to save the proportions of the source file and want to change them, in the dialog box next to the string "Save the proportions" (Constrain Proportions), remove the "tick".

Sources:

• diwo.BY.

Each graphic file has a size calculated by two parameters: the volume of the file itself and the size of the image resolution. Without visual loss of quality, you can reduce both the volume of photos and permission.

Instruction

paint.net program. Paint.NET is not a product supplied with Windows, unlike the standard Paint editor. Paint.net can download absolutely free on the Internet, while the program is constantly updated, supports Russian and has a nice interface. The Paint.NET distribution weights about 100 times less than the Adobe Photoshop distribution, so the program downloads quickly and almost does not occupy a disk space.

After starting Paint.Net drag the graphic file to the program working window. The picture opens in the editor. To change the permission, select "Image" in the upper menu - "Change Size". In the window that appears, configure the resolution of the new image to your taste. Do not forget to put a tick at the point "Keep proportions". After entering the desired permission, click "OK".

Now you need to change the format of the picture and the level "Quality". To do this, select all in the same top menu "File" - "Save As". Enter the name of the new file and select the type of file "JPEG", then click "OK".
A pop-up window will appear asking for quality. To the right you will see how the image quality (preview) varies visually, as well as the final file size. As you can see, between quality at 100% and 95% in JPEG format, there is practically no difference to the human eye and this allows you to save space on the disk. After setting up the quality level, click "Save". The image is saved.

Sources:

• how to change the size of the picture

The resolution of the photo is measured in pixels and is determined by the height and width of the photo. So, the photo taken on a 12-thymegapixel camera will have a resolution of 4000x3000 pixels. Such great permissions are not very convenient to store on the computer and upload online or send an e-mail by virtue of a large amount of file. After all, the higher the permission, the higher the volume occupied by the photo on the disk.

Instruction

To change the resolution, any photo editor is required - it can be Paint.Net, Adobe Photoshop, ULead Photoimpacht, ACD Seesystem and many others. The most affordable one is free and at the same time not inferior to functional - paint.net. The program has a fully interface and is understandable even. You can download the installation file by reference: www.painnet.ru/download/.
After installing and starting the program, open the desired photo in the "File" menu - "Open". To change the photos, call the "Image" menu - "Change Size". In the window that appears, select "Percentage" if you want to reduce the photo in a certain percentage ratio, or "absolute size" if you want to get the desired resolution. To make the picture did not stretch and did not complicate, check the "Save the proportions" parameter and enter the desired or image height in, while you need to change only one numeric parameter, the second will change automatically according to the photo scale.

A few words about saving photos with a new resolution. If you need to save the primary photo, without overwriting it, click "File" - "Save As" and save the resulting photo with a new resolution in the format you need to any convenient folder on your computer. Fir the original photo no longer need, just save the photo with a modified resolution by pressing the "File" - "Save".

note

It is worth remembering that changing the permission and overwriting a file, you will not be able to restore the former resolution in the original quality. Simply put, you can reduce the picture and not lose image quality, but it is impossible to increase it by saving the photo clarity.

Sources:

• how to change the format by the picture

There is a lot of situations when the picture needs a strictly defined size, for example, to install the avatar in the diary. Email it better to send pictures of a small size, and send you faster, and it is easier to accept the recipient. Let's deal with how to resize the picture in the photoshop program.

Instruction

On the control panel, select the "Image" section.

In the "Number of Pixels" section, enter the value you need in the "Width". The value of "height" is to change in the correct proportion if the image proportions must be changed, then remove the appropriate tick.

Also in this section you can set the size of the image in centimeters or as a percentage of the source.

Click OK.

Save the image and close the program.

Video on the topic

note

When changing the size of the picture, the image quality is worsening.

For those who are engaged in editing photos or just fond of graphics in general, the question of cropping the image, as well as the change in its size has always been at the head of the corner. When printing or displaying on the screen, in some cases, it is necessary to resize the image and, as a rule, to a smaller side. A decrease in the image leads to loss of quality. Modern image processing products include filters that support sharpness of the pictures even with its decrease.

You will need

• Adobe Photoshop software.

Instruction

Before downloading Adobe Photoshop, you need to decide which version you need. If you want to get a product with the latest processing, but not a big common weight, follow this advice: download the portable version of the program (Portable).

Open Photoshop - Press the File menu - select "Open" (or double-click the empty space program).

Click "Image" - select "Image Size".

When trying to change the size of the picture, the program automatically recalculates the volume in KB or MB. It is very convenient. If the "Save proportions" option is also enabled, the second desired value is automatically selected for your image. Then click the "Yes" button to confirm the size of your image. Otherwise, click the "Cancel" button.

Video on the topic

There are many different options for changing image resolution. Since this requires one of the graphic editors, it is easiest to use the one that is at hand. Consider a way to change the permission using the Paint Graphic Editor, which is installed on any computer with the Windows operating system.

Instruction

Add to Paint editor. To do this, press the menu button in the quick panel (in the upper left corner of the program window) and select the Open command. A window will open in which you will see the contents of yours. Find the folder in which the picture is located and click on it twice.

After the picture appears in the Paint Editor window, click the "Modify Size" button, which can be found in the menu from above. In the "Resizing and Tilt" menu that opens, check the "Pixels" options and "save proportions". Enter the desired digital horizontal value, after which the vertical value is automatically installed. Click the "OK" button and the picture will change your dimensions.

Now you can save the result. If you wish to save the original image option, then click on the menu button and select "Save As". Enter the title pictures And select the folder to which it will be saved. If you do not need to save the original picture, simply click the floppy challenge icon. Picture with new M. Replace the source file.

note

The described method is suitable for computers with Windows Vista and 7 operating system installed.

Sources:

• how to change the resolution in Stalker

For publication on the Internet photos It is necessary to optimize. Otherwise, they will weigh too much and many people may have problems with their download and watching. In order for the photo not to lose clarity and quality while decreasing, you need to know some of the rules for optimizing and compressing the image for online publications.

Instruction

Do not convert and do not save the photos to JPEG - this does not give sufficient compression, and you can get a small photo of low quality and large size. Convert the original photos to TIFF or PSD if your removes in RAW. If you have a simple, removing immediately in JPEG, save all photos in TIFF or PSD format.

Open a photo in Photoshop and spend the retouching and color correction, white balance, and, if necessary, adjust the contrast, eliminate the noise defects. Prepare a photograph for a decrease, save the original in the folder and start working with a copy.

First, open the Image menu and in the Image Size section, set the size you want. Find the Pixel Dimensions block in this section and if your photo has a horizontal orientation, set the width of 800 pixels, and for the frames of the vertical orientation, set the height of 800 pixels. Make sure that the scale of the photo is 100% and open the Filter menu.

Select Sharpen\u003e Smart Sharpen and apply a photo filter by setting the following parameters in its settings: Amount: 300, Radius: 0.2 or Amount: 100, Radius: 0.3. Watch the changes in the photo in the preview window. After the result is satisfied, save the image.

There is a more complex method of reducing the photo without loss of quality, in which the photo processing must be started with converting it in Lab. To do this, open the Image menu and select the Mode\u003e Lab Color option.

After that, open the Image Size section and in the Pixel Dimensions block, set a 3200 pixel width for the horizontal photo, and for vertical - a height of 2400 pixels. Image Scale Reduce up to 50%, and select Lightness in the Channels palette.

After that, open the filter menu and select Sharpen\u003e Unsharp Mask with the following parameters: Amount: 150-300, Radius: 0.8-2.0, Threshold: 15-30. Check if the noise of the image was increasing. Open the Image Size section again and set the width value of 50%, then return the real scale of the photo and select the channel in the palette, as in the previous case, the Lightness channel.

Open the filter menu and re-select the Unsharp Mask parameter by setting all the values \u200b\u200bof 50% of the previous values. To Channel A Apply Blur Filter, then the same filter apply to the B channel. Then go to the Image menu and select the Mode\u003e RGB Color section. Converting a photo back to RGB, save it.

Video on the topic

Sources:

• how to reduce photos in size

Wanting to install an avatar for your account, the user may encounter the problem of the following content: the image may exceed the permissible maximum on the resource, both in terms of scale and in terms of its volume. In such cases, the avatar can be reduced.

You will need

• Computer, Adobe Photoshop graphic editor.

Instruction

Find the Avatar on the PC, which you plan to download to a specific service, after which, click on it with the right mouse button. In the context menu of the image you need to select the option "Open with". Click the Overview button and find the photoshop program starter installed on your computer. After that, click the Open button. Avatar will be affordable for further editing in the program.

When saving an image, you need to select JPEG format. During the preservation, you can specify the picture quality, thereby determining its final volume. The higher the quality of the quality, the more avatar will be messed. Clarify the most allowed weight of the picture you can on the service you plan to upload an image.

One of the important properties of digital images that directly affect their display and printing is permission. The resolution is expressed at inch points and sets the relationship between the physical dimensions of the raster and its geometric dimensions in the output. Sometimes the resolution is mistakenly called the dimension of the raster image. The resolution value is stored in image files. Images obtained from digital cameras and other photographing devices often have a low resolution, well suitable for viewing on the screen. But in this case, before printing, it makes sense to increase resolution photos.

You will need

• Adobe Photoshop graphics editor.

Instruction

Open a photo in Adobe Photoshop. To do this, in the main menu of the application, select "File", and then the "Open" item or click the Ctrl + O key combination. In the selection dialog that appears, go to the C directory, highlight the file in the list and click the Open button.

Change the image resolution. Copy in the value of the "Width" field of the Pixel Dimensions of the Image Size dialog. Set the proportional change in the "Width" and "Height" fields if it is not installed. To do this, click on the image of the chain next to the fields. In the drop-down list next to the "Resolution" field, select "Pixels / Inch". Change the contents of the "Resolution" field. Enter the required resolution value. Insert the value from the clipboard from the "WIDTH" field of the Pixel Dimensions controls. Click the "OK" button in the dialog.

Save the image copy. Press the Alt + Ctrl + S key combination or select the "File" and "Save As ..." menu items. Set the save parameters in the dialog that appears. Click the Save button.

Helpful advice

If you need to change both a logical image resolution and its size to the most side, select "Bicubic Smoother (Best for Enlargement)" in the drop-down list at the bottom of the Image Size dialog.

Sources:

• Online Adobe Photoshop Documentation

Avatar is a small picture selected by the user for its graphic presentation on the forums, blogs or online pagers. Many sites and programs impose certain requirements for the size of the images used. On the Internet today you can find many standard avatars for every taste, but sometimes you want to put something special, individual. In this case, you have to customize the size of the image under the established rules.

Instruction

As a rule, most resources are not allowed to load more than 100x100 pixels and more than 1 MB. Therefore, to create photos from your favorite, it is first of all to reduce its size. You can do this in several ways.

First of all, you can use any graphic program, ranging from standard Windows operating system applications and ending with the "heavyweight" design as Adobe Photoshop. Not a very experienced user, the easiest way will use the standard Paint.NET program that is included in the Windows package.

To open this program, go through the following way: "Start" - "Standard" - "Paint.Net". In the main program menu, select the file "File" - "Open" and in the dropping window, select the file you want. After the graphic file is loaded, you can work with the image.

To reduce or select "Resize". In the window that opens, find the line "size" and under it two small fields to insert the desired values. Select the desired size. By default, the avatar is 100x100 pixels. Click the "OK" button and follow the program prompts to save the modified image.

If independent work with the Graphic Program seems yet too complicated, you can use one of the online services to create avatars. Go to the site http://resize.allavatars.ru/ And click the "Overview" button next to the empty field. The standard Windows window opens, reflecting directories and files on your computer. Select the desired file and click "OK". In the lower field, select the desired size instead of arbitrary, click the Next button and follow the detailed instructions of the system as a result you will receive a ready-made role-based avatar and type.

Helpful advice

When changing the size of the image in the Paint.NET program there is no need to enter the desired length and width of the picture simultaneously. Enter only the value required by the greatest side (for example "width - 100px"), the remaining values \u200b\u200bof the program will calculate the appropriate image proportions.

Sources:

• Creating avatarn online

Avatar - the desired item for registration on any site and user identification. However, often on the size Avatar impose restrictions with which you have to cope somehow.

Instruction

Check out the need to reduce. The most popular services, such as Vkontakte, have long installed the automatic image adjustment system. By downloading there a picture of any size, on the site of your you will see a reduced copy. However, this feature is far from everywhere. To be exactly sure about the need to reduce, find the restriction next to the download button: "The loadable image must be no more ..". The restriction can be both in the "Weight" of the file (MB) and in the size of the image (pixels).

Use Paint. This is a built-in program for basic image processing. In order to reduce the picture there, you should select the entire area "square", then drag the lower right angle so that the required size is installed. Then find the right lower corner of the "White Field" and align it with the edge of the picture. Please note that the picture when tightening can be deformed and after the increase - will lose in quality. Using this editing method, save the backup image.

Use Adobe Photoshop. Plus this program is that it allows you when you press the SHIFT key, do not deform the image, and maintain its initial proportions. In addition, creating a new document, you can immediately ask the field size you need. After the parameters are specified, open the original file in Photoshop. Highlight and drag it on the new file field. Too big? Press Ctrl + T and, as well as in Paint, clinging the angle, squeeze the picture to the desired size.

Change the format. If you need to reduce the size of the file, and not the Avatar Images, then using the above programs you need to save the image in another encoding. It is done equally: "Open-\u003e Save how." Next you need to select the image format. The smallest will be.jpg, it will provide the image size of not more than megabytes.

note

Try not to save pictures in format.png, not all sites recognize it.

Helpful advice

Standard Limit in the File Weight: 5 MB.

Sources:

• how to reduce size on the site

Almost every forum administration is something like a pantheon of the gods. They are free to set their own rules that users of Will-Neils must obey. Of course, the maximum size avatar It does not always depend on the whims of the forum organizers, there may be other reasons, such as the movement of the engine. But the fact is a fact if there is a problem to reduce the avatar, it needs to be solved somehow. For example, using Adobe Photoshop.

You will need

• - Adobe Photoshop.

Instruction

Run the Adobe Photoshop program and open the desired file in it: Click the File menu item (File) -\u003e "Open" (Open) or click CTRL + O key combination. In the window that appears, select Avatar and click the Open button. The picture will appear in the workspace program.

Click the Image (Image) menu item -\u003e Image Size (Image Size) or click the Alt + Ctrl + i key combination.

In the window that appears, find the Size section (Pixel Dimensions). Using the replacement of parameters in the "Width" and Height (Height) input fields (Height), which are in this section, you can change the size of the avatar.

If you need that the proportionality of the parties of the avatar remained unchanged, do not forget to put a tick near the "Save proportions" item (Constrain Proportions). The square bracket and the chain emblem will also be included that this setting will also say that next to the width and length fields will be the square bracket and the chain emblem. When changing any of these parameters will be changed and the other. If you, on the contrary, you need to stretch one of the sides of the avatar, turn off this mounted, i.e. Remove (or do not put) a tick near the "Save proportions" item.

In order to change the size of the avatar with a minimum of definition, activate the Interpolation Item (Resample Image) and in the drop-down menu that is under it, select "Biscubic Clever (Best For Reduction)". To save the result, click the File menu item (File) -\u003e "Save As" or click on the hot keys Ctrl + SHIFT + S. In the window that appears, select the path for the new avatar option, enter the name, in the File Type field, specify the one that you need (as a rule, most of the forums, blogs, sites, etc. support JPEG format) and click "Save".

Video on the topic

Suppose you found a avatar that fully reflects the essence of your controversial nature, but met with a small obstacle - he was too small dimensions. And if there is no desire to look for a larger version, you can solve this problem with Adobe Photoshop.

You will need

• - Adobe Photoshop.

Instruction

Run the Adobe Photoshop program and open the Avatar in it: Click the File menu item (File)\u003e Open (Open) or click on the Ctrl + O Hot Keys. In the next window, select File and press OK. The picture will appear in the workspace program.

Call the Image Size window. You can do this in different ways. First - click the "Image" menu item\u003e "Image Size". Second - Press CTRL + ALT + I key combination. In the menu that appears, you should be interested in the "dimension" section (Pixel Dimensions), and specifically what is in it is, i.e. Points "Width" (Width) and "Height" (Height). At the moment they specify the parameters of the open document, i.e. Avatar.

Pay attention to the lower part of the window, there are at least two points of interest to you. The first is to "save proportions" (Constrain Proportions), if it is a check mark near it, the image will not lose proportion to any circumstances. The fact that this item is activated will also mean the presence of an emblem in the form of a square bracket and the chain to the right of the "Width" and "height" fields. The second is "Interpolation" (Resample Image), check the checkbox near it, and in the drop-down menu, which is below, select "Bicubic smoother (Best for Enlargement)).

Install the required quantities in the "Width" and "height" fields and click OK. The image will increase. To save the result, click the File menu item (File)\u003e "Save As" or click the Ctrl + Shift + S key combination. In a new window, specify the path for the enlarged avatar, its name, the required format and click "Save".

Sometimes the choice of the only picture, worthy to be your avatar on the social network or on the forum, is a challenging task. Moreover, when the picture is selected, it may turn out that according to the rules of the resource on which you started the account, the sizes of avatar are limited. However, you can reduce the selected picture of the user in any graphic editor.

Sometimes it happens that it is necessary to resize the image. There can be many factors. Firstly, the more the size of the photo, the greater its size, and such files can be stored to store on the device. Secondly, if you need to throw a photo via the Internet, problems may arise, because some file sharing machines have the maximum allowable photo size limit.

That is why the article will talk about how to change the resolution of the photo. It can be useful in the computer, so I will proceed.

What is permission

First of all, let's deal with what permission is. And the term in principle is simple: the resolution is called the number of pixels vertically and horizontally image.

As you know, the more photo has those pixels, the greater its size. However, in our time there is an innumerable number of programs that are able to reduce the image, thereby reducing its size and without losing quality. Well, now let's talk about how to change the resolution of the photo.

I also want to say that with a decrease in the number of pixels relative to the original value, the photo will not lose quality, but if the same value is increased, then the difference will become noticeable.

Method number 1. Paint.

With the Paint program, probably, everyone is familiar. But despite its small number of functions, it is able to help in changing the resolution of the photo.

So, let's say, you have a photo with a resolution of 3,000 per 4,000, and you want to reduce this number twice. To do this, opens paint. You can use the search by calling it using the Win + Q keys. We immediately click on the "File" and select "Open". In the conductor that appears, you specify the path to the desired photo and click "Open".

Before you now your photo. To change its permission, click "Change Size". This button is located on the top panel next to "allocate".

Now the small window has opened, in which, first of all, you need to choose, in what values \u200b\u200bthe size will be changed. There are two options to choose from: pixels and interest. Choose the first. Now it is necessary to put a tick "save proportions", this will prevent the case when the photo narrows or flattens.

Now you can proceed to resize. Since we initially wanted to reduce the photo twice, then Introduce the value of 2,000 in the field "horizontally". You probably noticed that the field "vertically" was filled with itself, this is due to the fact that the check mark "Save the proportions "

Now click OK and we can safely save photos in a new amount: "File - Save".

It was the first way to change the photo resolution - in Paint, now go to the second.

Method No. 2. Adobe Photoshop

Now go from small to more, more precisely from Paint to Photoshop. Of course, these are two but they are not similar to each other, but this approach will not differ dramatically from the previous one.

So, begin to understand how to change the resolution of the photo in Photoshop. To begin with, it must be opened. Immediately after that, click "File", and then "Open" and launch the path to your photo.

Now click on the same toolbar item "Image". In the list, select the "Image size ..." string. Or you can simply press the keyboard shortcut Alt + Ctrl + I.

In the window that appears, immediately check the box opposite "Save the proportions". And in the "dimension" column, select Pixes in the drop-down list. Now boldly change the size of the photo.

Now you know how to change the resolution of the photo without loss of quality using the Photoshop program.

Output

As you might notice to change the photo, do not know much. The above manipulations will be able to perform each, and in the end you will get the desired: the photo will change, and the quality will remain the same, moreover, the file size will noticeably decrease. We hope the article gave you the answer to the question of how to change the resolution of the photo.

Those users who wonder how to change the size of the picture can use specialized programs to solve such a problem.

One of these is programInfanView.which is easy to functionality, and also works fine on any computer. Consider the procedure for working with the program on the example of this screenshot:

Size picturesrequiring a decrease is indicated by the arrow and it is obvious that it is large enough, which means that the image itself is much weighs. By simultaneously pressing keys Ctrl+ R.Opened menu changes in the number of pixels.

Here the user specifies The desired value and, accordingly, dimension, and also, if necessary, can maintain the proportions of the initial option. After editing, you can save a picture through a menu or combination Ctrl+ S..

More advanced users and owners of powerful computers can take advantage of a fairly popular program - Photoshop.. By downloading the desired image to the program and defining its size, go to the menu section Picture > Image size.

In the window that opens, as can be seen from the screenshot, you can vary all the parameters associated with changing the picture, and later the material can be saved in any format.

How to change photos in Paint

One of the most simple and rapid ways, changes in the size of the picture, is to use the standard Paint program, which is available in any version of Windows. Depending, the program may have a different interface, but the procedure will be the same.

Opening the image or photo, at the bottom of the screen can be seen sizes clip. In the top line of the menu or on the toolbar, you should find a function that is responsible for resizing, an example is shown in the screenshot. Changing her window opens Similar sample:

This method, the simplest, and, accordingly, the functionality is less in it, but the problem under consideration is perfectly perfect.

Use online services

In certain situations, the user is much faster and more convenient to use any online service that allows you to change the size of the images. Of course, such services exist, and they allow you to produce all the necessary operations directly in the browser. One of these services is - imgonline. com.. uA.

To start working with this site, it is necessary that the desired image is on a computer or device. The program workspace looks like this:

Here all actions are already painted step by step, and therefore any user can easily and quickly do everything you need. At the exit receivev. picturewhich can be downloaded or immediately send somewhere.

Another service, with similar functionality is - inettools.. net.

By downloading the desired image, the user will see this work field here:

Noteworthy is such a moment that here can be one after another, quickly edit several photos, or for all selected pictures apply a single type Adjustments.

The next site is called - resizepiconline.com.

Working with it consists of four steps, where the first is the loading of the source material, and the fourth is the preservation of the result obtained. The image editing process is directly occurring, at step number 3, where with the help of convenient sliders can be quickly and visual change parameters.

At the end of the work, the finished material can be saved or get its network address.

As often, looking through photos on the computer, we threw cool frames, because they were too small in size and poor-quality. But with the help of special programs, you can save almost any image!

Improving image quality is a very voluminous topic. To improve the quality of the photo in Photoshop, color correction, increasing sharpness, retouching and many other operations can be used. All of them require certain skills and possession of special techniques.

But there are less complex ways when the image increases simply without loss of quality. Below we will look at the example, how to improve the quality of the photo if you need to increase the photo without loss of quality.

How to enlarge photos without loss of quality

Everyone had to face the image of a small size of a low quality. In such pictures, the pixels, points from which a bitmap image are strongly visible.

An increase in the image by stretching it with free transformation will only worsen the position.

In this lesson, work will be held in Photoshop CC 2017. But first we will look at the method for other, older, versions of Photoshop. And then we show how Photoshop CC 2017 can make the entire procedure automatically.

Open the image in Photoshop. Now we will gradually increase it in several goals. It is worth noting that you can increase the photo and raise quality, but with a limit in size.

Press the keyboard key Alt + Ctrl + I. We will have a window "Image size". Need to be between "Width" / width and "Height" / Height Click was pressed. Then width and height will vary proportionally.

Running the image twice, each time by 20%. For this in the drop-down list opposite "Width" We change pixels percentage (Pixel / Percent), and a numerical value from 100% by 120% and click OK.. Then we call the image size window again ( Alt + Ctrl + I) and increase by 20%.

We increased image size from 950x632 pixels up to 1368x910 pixels.

For a visual comparison, get the original image (950x632 pix.) And the resulting (1368x910 pix.).

We increased the image almost one and a half times and even improved quality. As can be seen, pixelization is less noticeable if closer image.

It remains to refine the result. Apply filter "Smart Sharpen" to the resulting image.

We go: "Filters" / "Strengthening" / Smart Sharpness / Filter / Sharpen / Smart Sharpen. By moving the slider, select suitable sharpness. If in a small preview window on the image to click the left mouse button and hold, you can see the picture before applying the effect. The difference is noticeable. The smooth transition of colors (without cubes) on the lenses of glasses is especially noticeable. We completely removed the noise, shifting the slider to the end to the right. The radius of sharpness took 0.3 pixels, the effect was applied by 79%.

Once again, compare the results.

On the left - the original image, in the center - after increasing the size, on the right - using "Smart sharpness".

After use "Smart sharpness" In the photo noise went, the image became cleaner.

Here is our result.

And now you will increase the photo and improve its quality with the help of automatic products Photoshop 2017.

Open an image in Photoshop, press the keyboard shortcut Alt + Ctrl + I. We will have a window "Image Size" / Image Size. Pay attention to the item "Fit under" / dimensions. Expand this list. In it, you will see the blanks of the options for increasing / decreasing the image without loss of quality. We use the automatic selection (second point in the list). In the window that opens, select the item "Good" and click OK.. It is not worth the best to choose because the original picture is too low quality, and it makes no sense to increase it.

Please note if we managed to enlarge the image from 950x632 pixels and a resolution of 96 pixes / inch to 1368x910 pixels with the same permission, the program made an increase of up to 1969x1310 pixels with a resolution of 199 pix / inches.

Apply "smart sharpness."

Now you yourself were convinced that you can enlarge the picture without loss of quality, and at the same time even improve the quality of the photo.

It is worth noting that this method can be useful not only to increase and improve small photos. For example, you need to provide a photo for an Internet resource or for printing in publishing. Your photo is excellent quality and large size, but for the publisher is needed even more. Applying the described method of increasing the picture and improve its quality, you will get an excellent result. After all, photos of large sizes with good quality will be much easier to pass this procedure.

The procedure is extremely simple. Do not put a cross in small pictures. Give them a second chance.

Sometimes you often have to reduce or increase the size of the image. You can do this in several ways. Below is a detailed instruction.

How to resize image in Paint

• We go to Painf. To do this, click on the magnifier icon in the lower left corner of the desktop and drive the word "paint", click on the search result.

• In the right left corner of the program being opened, click on the "File" tab, in the drop-down menu, select "Open". You can also make it a Ctrl + O key combination.

• In the window that appears, select the photo you need, click on it and click "Open".

• The selected image is displayed on the so-called. "Canvas" programs. To change the size of this image, go to the "Home" tab, in the "Image" department, click on "Change Size".

• In the window that appears, you need to set new values \u200b\u200bfor the image. Paintes automatically saves the proportions so that the quality is not spoiled. If there is a need to set different proportions, remove the tick next to the "Save the proportions", set the desired values \u200b\u200band click on "OK".

• The percentage of the height and width of the image was adjusted under the values \u200b\u200bwe set.

• Cut the white part of the canvas by pulling the point in the lower / higher edge and press the "Save" icon or the Ctrl + S key combination.

How to change image size online

On the Internet there are many services with which you can resize the image. Below will be a list of some of them, an example of a resizing on the online photoshop service is considered.

• We go to the site https://online-fotoshop.ru/. Immediately leaves the window offering to choose a way to work with the image. Click on "Download Image from Computer" or "Open URL Image"
• By clicking on the aforementioned tab, select the image. After the image loaded, on the "Image", then to the "Image Size".

• The window appears similar to the window, but not with percent, but pixels. If there is a need to remove the tick next to the "save the proportions", change the pixels, click on "yes".