Disconnected screen on the iPhone 5S. IPhone hung, black screen what to do

If yours Apple iPhone. Drew, and just glows a black screen and you do not know what to do, read on. :)

iPhone does not turn on, black screen

The software of each phone is not perfect, and there are cases that the iPhone hangs and does not respond to any actions on your part. This happens rarely, but it happens. :)

First of all, you need to try to use the combination of buttons to carry out an emergency reboot of the phone. It is she who must help you. Of course, if you didn't stop working at all your favorite iPhone.

Extra reboot iPhone

Clamp button Home. (The largest button on the phone, at the bottom in the middle) and the Sleep button (that is the top that is capable of unlocking the smartphone).
Hold down the buttons within 10 seconds.
Your iPhone must reboot. The screen will light up, an apple will appear.

This combination of buttons for rebooting is suitable for any apple models iPhone: 2G, 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 PLUS, 6S, 6S Plus, 7, 7 Plus. In general, for all existing smartphones from the apple company.

Into the screen on iPhone 5 - fix the problem

Users iPhone 5 and iPhone 5S may encounter the fact that the screen of the phone suddenly swells and no longer responds to touch. Consider all the ways with which you can solve this problem.

Causes of malfunction

Before reinforcing repair, you need to identify the cause of the problem:

Fall or shock smartphone. In this case, we can say that the wort the screen on the iPhone is due to the hardware fault of the display module. To solve the problem, it is necessary to completely replace the display;
Moisture getting into the housing. In this case, you need to disassemble the phone, dry all its details and, if necessary, replace the display;
Software reasons (the screen can be ground and no longer turned on after the call or the result of working with some programs). Correct software problems without repair.

Restart the phone

If the screen on the iPhone 5 is suddenly extinguished and turn on the device using the standard pressing of the "Home" key, try to restart the smartphone. To do this, clamp the power button and the HOME key for ten seconds. After the reboot window appears, slide the slider to the right and wait for the smartphone reboot. In most cases, this method helps to quickly "revive" the phone.

Reset conversation statistics

If your smartphone went out and stopped responding to touch immediately after or during a conversation, the call statistics are overflowed. This can provoke phone hangs. Emergency reboot the iPhone, as described in the previous step. Now reset statistics. Go to the settings, click on the main, then the statistics and in the window that opens, click on Reset Statistics.

Notice this method It will help to solve the problem only if the screen goes out immediately after the end of the call and, when the smartphone is turned on as a result of an emergency reboot. Relief statistics allows you to eliminate the possible appearance of a problem in the future.

Screen replacement

If the black screen appeared in the iPhone 5S after impact or fall, most likely you have to change the display. Also, we advise you to change the screen, if none of the previous ways to solve the problem approached.

For repair you will need:

Screwdriver for iPhone 5;
Tongs for repair;
Blade for disconnecting elements;
Sucker for opening the case;
New display module.

Work only on a clean, smooth and light surface. All disconnected details fold in one place so as not to lose them. To start, unscrew the two screws at the bottom of the phone, as shown in the picture:

Disconnect the display first with the suction cup, and then the edges of the blade. Disconnect the touch glass.

After removing the metal plug, disconnect the loop that fastens the display with the "Home" button.

Now you need to unscrew all the screws and release the display loops from the protective panel.

Disconnect all four loops after it so that the old display can be discharged from the main part of the case. Figure below released disconnected loops:

Take a part of the old display. Gently disconnect the hearing speaker, after removing it and its protective panel. Set the item to the side.

Unscrew all the screws that fasten the display protection to the display.

Carefully subttage the protective panel, as shown in the figure below:

Carefully fit the plume of the front chamber and the photosensitive sensor.

Using forceps, remove the camera lens.

Unscrew the two screws that hold the "Home" button protective panel and remove it.

Disconnect the button using forceps, as shown in Figure:

We completely disconnected all the elements from the old display. Now take a new display module and remove protective film From his inside.

Set the "Home" key on the module and immediately fix its protective panel with two screws. Set all the items to the new display, performing this instruction in the reverse order.

Any instructions for independent repair IPhone 5 you can find on our website, or make a challenge of a specialist for At any place convenient for you.

All the branded categorical hello! Constantly active screen illumination can be a large enough problem - after all, the display does not automatically go out automatically, leads to a variety of uncomfortable things. To what? But for example: very fast battery consumption, strong heating of the device, and indeed it is terribly annoying, as the iPhone is practically impossible in such a state!

No, of course, there is one win-win version - put a smartphone for charging and never turn it off from the outlet. How do you like? I do not like. Much better - once and forever deal with always "burning" iPhone display. This is what we will deal with today. Prepared? Reade set Go. Let's go! :)

What situations can lead to the appearance of the iPhone screen is constantly active:

Yes, you never know what else can be! Let's describe all the ways to solve the problem of the non-screens of the iPhone screen. So, here's what actions are universal and suitable for each case:

Hard reboot. To do this, hold and hold two buttons - Home + Power (for iPhone 7 and older - button "Down" and inclusion) to a complete reboot.
On DFU, after that it is important not to restore backup And observe behavior.

We now turn to private events. There may be two of them:

Does not go out during the conversation.
Not blocked automatically, the screen is not turned off after receiving the notification or in standby mode.

The iPhone screen does not go out when talking? Decision!

First of all, look carefully on the front part of the gadget. See on it films, glasses, covers - covering the front side of the iPhone? Even if they seem completely transparent to you, has washed away to get rid of them and check the operation of the light sensor without such accessories.

If it did not help, and all previous tips (resetting settings, reboot, recovery) were performed, then most likely the case in the light sensor. He could just "move away" and break.

That is why when you bring the phone to the face during a conversation, your iPhone does not know that it is necessary to extinguish the screen and this does not happen. The solution will be only one thing - replacing the approximation sensor. Fortunately, his value is not big and he changes quickly. On average, it will cost you 1500-3000 rubles.

The iPhone display does not turn off after receiving the notification or the arrival of SMS

The situation is such - a notification comes to the locked iPhone, the display naturally lights up, but later it does not go out automatically, and you can only turn it off by pressing the lock button. I know by myself - it annoys terribly, especially at night. I received a notice when you sleep, wake up - and the phone is completely discharged.

I'll tell you immediately and I'm wrong - the problem is most likely it is in the software. So, there is probability to fix everything without a hike in service center. What can be done:

First of all, go to the settings - the main - Avtoblocking. If there is exhibited - "Never", then this is the reason that the screen is not blocked automatically. Put the accurate time interval (by default it is 1 minute).
Further it is necessary to perform the actions that are indicated at the beginning of the article, namely full reset and restoring the firmware. But here there is a small "quenching" - such actions are not always convenient to produce, and for a long time. Therefore, you can do this ...
Remember what games and applications have been installed lately and remove them one by one and check whether the situation has changed for the better. And of course, if you have a jailbreak on your device, you should also pay attention to those tweaks that are installed, they may certainly lead to the fact that the screen will not go out.

Finally, I would like to note that you should not forget about the guarantee (

If the screen stops working on the iPhone, there is a chance to cope on your own. The causes of this malfunction may be different: from mechanical damage when hitting and entering moisture inside the phone to system errors when flashing and rebooting the smartphone. Violations When operating an iPhone can lead to the following problems: Does not show or swells the screen, the display module stopped reacting, there is no image on the touchscreen, the touch glass is damaged, the smartphone is not turned on at all.

It is necessary to know the causes of the fault to determine if it is possible to cope with similar problems yourself or you should give the iPhone to professional repairs.

Why do touchscreen faults occur

To answer the question: "What to do if the iPhone has extinguished the screen, but it works?", First of all, you need to establish the cause of a smartphone malfunction. Various errors The screen is most often arising for the following reasons:

damage to the display after falling or hitting
moisture getting inside iPhone
system failures when flashing iPhone, installing updates, etc.

All of these breakdowns can lead to various failures in the iPhone.

What malfunctions arise in the iPhone most often

If your iPhone fell, crashed, stopped working after poorly flashing, went out after installing updates, the device may require a qualified repair. Most often, "symptoms" of such faults are the following problems in the work of the iPhone:

the screen does not work
swells screen
disable the screen
"Black Screen" (no backlight)
tORMEMIT screen iPhone
smartphone turned off and does not react to any commands
cracks appeared on the screen surface
there were other displays damage

If you are dropped and smashed your phone, check if the iPhone has saved performance. If the smartphone turned off, the ground and does not react to any commands, and large cracks appeared on the screen surface, without professional repair Devices can hardly succeed. But if the iPhone just went out the screen, while the device does not turn off, Touch Screen remained as integer, and calls still pass, you can try to eliminate such damage yourself.

How to eliminate iPhone malfunctions independently

If, after falling, hitting and other nutrients, the iPhone remained enabled, and the screen is integer, but at the same time it wore, stopped responding and sharing the sounds or began to slow down, you can try to return the device to the device yourself. First of all, try to restart the smartphone. This can be done using the simultaneous press of the following buttons:

screen lock button
hOME button
power button

If after such actions the display is on, the call goes and Touch Screen reacts to touch, the device can be continued to use without feet. If the screen remains dark and still refuses to work, although the smartphone is turned on and calls, and the beeps pass, try to do the following:

remove the protective coating (sometimes it becomes the reason that the iPhone screen goes out)
change charger and other components (sometimes they force to turn off the smartphone, brake and go out the screen to iPhone)
remove the decorative cover (it may also be the reason that the iPhone has extinguished the screen)

If all these actions did not help your smartphone, which stopped working the display, it is unlikely to repair it. Continue attempts to eliminate the black screen is not worth it - it can lead to the fact that the phone will start to slow down even more, stop calling, turns off and will get out at all. To no longer harm the smartphone, which fell and the display stopped working, you should entrust his repair to professionals.

Who give a smartphone to repair

Situations in which the iPhone has extinguished the screen, the display module was damaged, other problems (for example, sound turned off), familiar to any wizard of repair. If your smartphone fell, a dark screen appeared on it, etc., you can give it to repairs to any service center. However, if you do not want to wait a long time, until the Wizard eliminates the black screen, and overpay for the repair of the switching screen, contact Uda performers.