Print consumables at wholesale prices. Printing consumables at wholesale prices SAMSUNG SCX firmware

Office equipment often fails, and there is sometimes no time for accessing specialists. In the event that there is no possibility for any reason to ask for help to professionals, you can flash the printer at home. Companies producing modern office equipment, quite a lot. In undoubted leaders, the Korean company Samsung, US company HP (Hewlett-Packard) and Xerox.

In the age of information technologies, find the firmware file of the same Samsung is quite simple. The given instruction will tell in detail how to flash the printer of the common model - ML-2160. Often you can order the firmware file from proven specialists, together with it will send detailed instructions for the firmware with your own hands.

What will we talk about:

Printer Firmware Information

Long exploitation of office equipment Samsung can lead to the need to make a firmware. As a rule, the firmware is tied to the model and the serial number of the printer. Information about the firmware of the Samsung technique is easy to find in free access, it is enough to know the serial number of the device and the model, for example, ML-2160 or SCX-3400. After the firmware, the technique will work without interruptions and additional chips. The printer or MFP is no longer blocked.

Instructions for firmware office equipment

Many people are wondering how to flash the Samsung printer at home, because at home there are no necessary tools and the necessary files. Specialists advise to fulfill phased several steps. Carefully follow the instructions on how to flash the printer.

Information reports

The first and easiest step in the detailed instructions of the Samsung printer firmware are always the same: you need to request a configuration report. It's easy enough to do it. Load two sheets in the printer, be sure to check whether the covers are closed tightly. Press and hold the SAMSUNG button on the MFP panel or printer to the Print Screen within a few seconds. The installed indicator should blink several times, stop and, as soon as it triggers, release the button. The report is printed.

The next button will help print the consumables report. To obtain it, it is necessary to hold the print button again for a few seconds. In this case, the indicator signal should be different. You can let go after the next sequence of the indicator flashing: caught fire, went out, caught fire, went out and began to flash more intense - let go of the button.

Firmware version

After the actions produced, the printer will print two reports. Carefully examine the content of the first sheet and look for the following inscriptions: "Firmware Version" and "Machine Serial Number". The second report should contain "Serial NO".

The serial number contains Latin letters and numbers and varies depending on the type of printer or MFP, as well as manufacturer companies (Samsung, HP or Xerox).

Search for file firmware

The necessary data found in the reports should be carefully written off or make a sheet scan. After that, with these data, you need to contact the specialists, without forgetting to report the printer model, for example, ML-2160 or SCX-3400. Of course, you can find yourself and download the firmware file on the Internet, but there is no guarantee that it will not happen a software failure that will destroy your printer.

The downloaded or received file must be transferred to the computer to which the Samsung printer directly connects or other office equipment.

Preparation for the firmware

First of all, of course, you need to connect office equipment to a computer. Regardless of whether this printer is either MFP. Connection is performed via USB cable. After the connection you need to wait for the notification of the system that it was determined.

Independent firmware

The name of the firmware file will coincide with the name of the printer model. For example, the file may be called this: FIX_ML2160_V1.01.00.34.

The file itself should be transferred to the connection icon with the printer, often it looks like this: USBPRNS2.exe. Do not be afraid of the darkened monitor, as the fill is filling the firmware directly into the printer. After that, the technique independently reboots.

Important! In no case disconnect the printer yourself, wait until it completes the reboot.

The firmware process takes from 1 to 3 minutes, depending on the model of equipment and the manufacturer (Samsung, HP or Xerox). The printer will independently enter the operating mode, restoring all the settings.

You may need forced firmware loading mode in the ML-2160 model. Make it easy: Turn off the printer from the network, clamp the PRINT SCREEN button and turn on the technique. You need to detain the button for three seconds, the indicator should light up. Forced download can be applied in the case of an incorrect firmware file, or if you need to return the original version.

Completion of work

The last step in the samsung printer firmware is to remove a special chip from the cartridge. In addition to direct extraction, you can take it with a tape or insulating tape.

To complete the work, clamp the STOP button for a few seconds. Technique is ready for work, the firmware has been able to hand.

Do not forget to find information on how to flash Samsung's printer is quite simple. But independent firmware does not always be a panacea from software failures. Carefully learn information on how to flash the printer at home before starting to work.

SAMSUNG SCX 3400 Firmware via USBPRNS3. This article provides general recommendations for the profession of SAMSUNG printers firmware through the USBPRNS3 firmware program.

First, we print the report: Menu # 193.4 - In TechMenu, select "configuration reports" and "On consumables".

All that interests us is what firmware versionNo Lie Letters F. In the report and CRUM number. We will sew through USBPRNS3, which can be downloaded from our file archive (Section Additional Software).

The firmware process is shown below on the screens. The program does everything automatically. You only need to enter crum.

After clicking Fixit. We are waiting for the end of the printer firmware

The printer reboots. Pull out the chip. On this, the whole process is over. We can not touch the new versions of the firmware, you do not remember it.

Another version of the firmware, for old versions:

Print reports. . In this case, print a report, pressing and holding the button Stop.

When displaying - flashes 2 times with green, Configuration Report is printed. If the stop button hold a long printed Supplies Report.

In the configuration report, we are interested in the firmware version - in this case it is 06 and what is written in quotes (we draw attention that the firmware version without letters P and F is that the printer does not sew and SCX3405 without letters, then the printer is 3405)

And consumables report

Here we need CRUM number, we have all the information we turn to the firmware.

Shes via USBPRNS3, the link is higher. The printer is connected. The driver is installed (not necessarily, but we got automatically). Turn on USBPRNS3. Go to Main. We see the following - the program determined the type of printer (3400), identified the serial.

Further actions on the screenshots:

After checking the fixt, Fixit pressed. By this time the printer can "fall asleep", "wake up" it can be pressed by the "POWER" button. Strip from below passes to the end. At this time, do not touch anything.

A couple of days ago, I wrote that my Samsung ML-1660 printer broke - stopped typing, a red light burns. I have already started thinking in our city, but I decided to first try to correct the situation on my own. And here is a hurray, a few hours of torment and everything turned out!

But at first I will tell you why I suffered so long. It all started with the fact that the native cartridge one finely refused to print - the chip worked. Then I passed the printer literally in 5 minutes, did not even write an article, too everything was simple. Yes, and such manuals in the network wagon.

Printed my printer after that long enough. I bought another cartridge, chinese, he also printed perfectly. But at one point he refused to print, the red light bulb began to burn.

I thought at first that I could have something broken? The printer is proved, the cartridge is new, even there is old, and both are not printed. But when I installed my samsung's native drivers, the program clearly gave me to know what's the matter:

The program showed that the problem is with the cartridge and invited me to go to the store and buy a new one. Yeah, everything threw and ran away ....

I started to download various firmware, all to try them, but I did not work. The printer did not even give me to print a page with the firmware version!

Can still attribute the device to the service center, where do subscriber maintenance of computers? No, Russians do not surrender! After quenching a couple of hours, I still won it. Hooray!

How to flash the Samsung printer yourself?

Unpack the archive, run the file and in the window that opens, we look for a printer, and then we look for a 15 digit serial number.

After that, we need to generate a new firmware for our printer based on this serial number. To do this, download this program.

Unpacing the archive Run File fixMaker.exe. And after that we will see such a program:

Here we enter the serial number of our printer, choose our model and firmware version. After that click the button Create Fix. A minute later, the firmware file will appear in the program folder, approximately such a name - Fix_Z4Q5BKAZ400306J_ML1660_V34_NU.HD.

Here, we got a new firmware, which will be in parallel, we have a toner in the cartridge or not. (How to fix the cartridge yourself.) It will print to a victorious end!

How to flash the printer?

For firmware, we need a small utility, and in general there are even two - DOWNLOAD .

The first one is uSBPRNS2.exe. - Need to firmware printer as usual, and the second one - uSBList2.exe. - For forced firmware. How to flash? Very simple. You need to take the cursor the firmware file and drag to the firmware program:

All my torments concluded that the first way I did not want to work, the process hung and nothing happened:

And how to flash with the help of the second program, no one really wrote, and I figured out the method of tyk! What should be done?

Turn off the printer, press and hold the second button on the printer panel, and not releasing Press and hold the power button. The printer will turn on and the light bulb will begin to blink quickly in turn, then green. Release the buttons. Wait until the drivers are installed on the printer, as it is now determined differently.

SAMSUNG M2020 M2020W "Firmware" We are learning from chips

Attentive reading of articles will save you from the mass of problems in the future. Articles are constantly adjusted so that it makes sense from time to time to peel and refresh in memory or recognize anything new.

Let's proceed.

1) Before us printer - print reports. I printed through Menu # 1934 - in TechMenu configuration reports and consumables.

All that interests us is what version of the firmware and whether the letter F in the report does not. And CRUM number.

Sew me from USBPRNS3

The process of firmware on the screens. The program does everything automatically. From you only fade crum.

After clicking Fixit, we are waiting for the end of the printer firmware process

The printer reboots. Pull out the chip. On this, the whole process is over. We can not touch the new versions of the firmware, you do not remember it.

And just in case, left an old article.

1) We have a fresh Samsung SCX 3400 printer

The printer is already connected. Firewood is installed (not necessarily, but we got automatically). Turn on USBPRNS3. Go to Main. We see the following - the program determined the type of printer (3400), identified the serial.

Further actions on the screenshots

After checking the fixt, Fixit pressed. I had to wake up a printer (by this time he had already fallen asleep, by pressing the meal button) the strip from below passes to the end. Do not do anything at these moments !!

Actually the printer began to sew. The process is short. We are waiting for the printer to restart.

Actually everything. But this model is extremely desirable to disconnect the crum. So it is calmer in the future.

Disconnected

This is done in order - if in the future the client put the cartridge with the chip printer does not change the inner crum to the new one. And the firmware will remain workable.

Finishing touch.

I remove the chip and print a report.

The printer is green. In the letter F. letter