TeamViewer permanent access. How to install TeamViewer - Step-by-step instructions

If you need to get full access to another computer over the network or vice versa, provide someone access to your computer, then specially for these purposes there are various remote access programs. Most of these programs work, provided that the managed computer has a permanent IP address on the network (so-called. White IP). At this address, we can directly connect with this computer. But most often the IP address of ordinary home or office computers is inconsistent (so-called Gray IP). And therefore, most remote access applications will not be able to connect with such a computer via the Internet. In contrast to these many applications, the TeamViewer service makes it possible to connect computers regardless of their permanent IP address. That is why this program has become extremely popular among ordinary users working for ordinary computers, not servers. In this article we will tell how to use TeamViewer. And what principle is this program of remote control computer via the Internet.

TEAMVIEWER service principle

Remote access programs work on the following principle. The computer to which the connection is carried out is requesting a password for connecting. After the password is correct, the managed computer reports the master size of its screen, the position of the mouse cursor and sends the image contained on it in a compressed form. The host computer shows the resulting screen content in the window, and provides the user with the ability to move the cursor and press the mouse and keyboard keys. All of these manipulations with input devices without delay are sent to the driven computer, which takes the received data as if they were obtained from its native keyboard and mouse. In turn, the slave computer constantly monitors the contents of its screen, and in the case of the slightest changes, retains all modified pixels in the form of packaged data and sends the master computer. Such mutual data transfer is performed continuously, thereby creating a maximum matching work directly at a remote computer. It is worth noting that in the case of low speed or unreliability of the Internet connection, data transmission problems naturally appear, which is expressed either in the image hang, or in a large delay when responding to keystrokes.

The bottleneck of such programs is the phase of establishing communication between computers. If computers are on the local network, they are easy to find them on their local IP addresses. But if the driven computer is outside the local network, it will not be possible to access it directly if it does not have a highlighted IP address. To get around this restriction, the TeamViewer program acts a little differently. The slave computer establishes a connection to the TeamViewer service server receiving a unique identifier (ID) from the server, and the master computer refers to the server and reports the computer ID with which the connection wants to establish. And then the server connects a leading computer with the slave. Thus, the server acts as an intermediary connecting two computers, which themselves do not see each other.

Installing and launching TeamViewer

If you need a TeamViewer program for permanent operation, you can download and install it with official Site. You can also use the portable version of the program available in the directory. To do this, choose it in the "Utilities" section.

After downloading and unpacking, you can run a program from the list of portable programs.

Of course, the program must be launched on both computers - both on the drive and on the slave. The portable version of the program is enough for full-fledged work with the program with the reservation, which a user is present behind the driven computer that can report a changing password. If you need to receive management over a computer without the presence of a person behind him, then on such a driven computer, the portable version is not enough. Then, before using TeamViewer, it will be necessary to carry out its full installation in normal mode from the official site by setting a permanent password to access without human control.

The program can be used for free at no commercial purposes, which is reported at the bottom of the window when opening the program. Also at the bottom of the window displays information about the connection status with TeamViewer servers. If there is no connection for some reason, then the message will be displayed "not ready. Check the connection. "

In the case of a successful release in the online will be seen the message "Ready for Connection", and numerical values \u200b\u200bwill appear in the ID fields.

If you are for the driven computer, then after starting the TeamViewer, you will not need any actions anywhere else, except to communicate displayed in the ID window with a password person who wants to connect to your computer.

Connect to a remote computer

Once you have reported ID and password displayed in TeamViewer on a managed computer, you can connect to this device. To do this, you should also open the TeamViewer application and enter the computer identifier you are reported in the field with the "Partner ID" field. Then click the "Connect to Partner" button.

The program will try to establish a connection with the remote system - if everything goes normally, the window will appear where you can enter a message password and click the "Login to System" button.

As a result, you will see the contents of the screens of a managed computer and get the ability to control it using the keyboard and mouse. In addition, the sound reproduced by the audio device will also be heard. To configure various parameters and using additional functions, a special panel is available at the top boundary of the window. In most cases, remote control of the computer via the Internet can be made without using this panel. Therefore, it usually makes sense to minimize it so that the panel does not close the part of the remote computer screen.

After you produce all the necessary operations on a remote computer, you can complete the session by simply pressing the window closing button with this session.

Additional features TeamViewer

With each new version, the TeamViewer program is becoming different new services. If the early versions of the program were limited to one additional feature of transferring files between computers, then so far in the program there are a number of different services:

Chat (text dialogue);

Video (show image via webcam);

Demonstration drawing;

Removing the screenshots of the screen of the controlled computer;

Record on video actions from a managed computer screen;

Sharing files.

In a number of individual cases, these functions can be useful. If you need to use them, you can use them through the panel at the top of the remote access session window. But most often it is more convenient to use other specialized programs for such purposes. So, for example, correspond in chat or perform audio / video calls more conveniently in Skype or another Internet messenger.

conclusions

This article outlines the necessary information on how to use TeamViewer. The use of portable versions of this program is sufficient to solve most important tasks for remotely manage the computer via the Internet, except for one - the possibility of accessing the computer, which is not present by the user. Full installation of the program removes this problem.

The presence of additional features in the TeamViewer program allows you to expand its scope, conducting visual demonstrations, text, audio and video travel, video of action on a managed system, etc. The fact that the program is free to work in non-commercial purposes makes it particularly attractive for many Internet users.

Hello, friends! In this article we will learn to use the programTeamViewer. and with her we will understand how to remote computer management via the Internet. There are enough programs with which you can remotely manage andTeamViewer, probably, the most common one. The Windows operating system allows you to connect between computers using the built-in tools. As far as I know, it is necessary that there were accounts with password accounts on computers. Otherwise, it may not connect. And this is the main problem, since I have only one friend, more accurately familiar, uses the password. (How to reset the Windows administrator password can be read). It is much easier to remotely manage computer through third-party software - TeamViewer. As they use it and we will understand this article.

How to use TeamViewer.

First, we need to download the program itself. Naturally from the official website in order to protect themselves from viruses, Trojanov and another unclean.

Next, you are invited to immediately download a distribution for your operating system. As you can see, various OS and even Mobile are supported. That is, you can install TeamViewer on a tablet or smartphone and remotely manage your computers.

Press Download and download the distribution

Run the downloaded file TeamViewer_Setup_ru.exe. This program can not be installed only to start. This is an excellent opportunity to assist or get it open. If you are planning to use TeamViewer often, it is better to immediately install it.

In the window that opens, leave everything as it is and click to accept - complete

There will be setting and starting the program. The main window will look at approximately as follows.

In the Allow Management section there will be your ID and password. This data will need to inform the partner to remotely manage your computer.

In order for you could manage another computer, you enter a partner ID and click Connect to the Partner. Next, you must enter the password that is displayed on the partner's computer and click Login

Password usually consists of 4 digits and, with the right entry, you will see and can remotely manage the user's computer

That's how it will look like. By default, the wallpaper on the desktop of the remote computer is not displayed. This option, if necessary, you can enable in the View menu.

In this window, you can perform almost all actions as on your local computer, and your partner, at this time, can see how and what to do.

To complete the connection, you must click on the cross on the left in the menu or simply close the window. At the same time, the window below will appear, where you click OK

If you need to often remotely manage another or your computer, then you can register for convenience.

Then go to the program under your account by entering your e-mail and password. Your computers will be displayed on the right (to which you have access). From the beginning you will have empty there. In order to add a computer to enter a partner ID (as if you want to control remotely) and click on the asterisk (highlighted in the picture)

The properties of the added computer will appear. Specify him a network name. Description at will. Press OK.

A well-known program for installing a remote management of the TeamViewer computer has recently become increasingly and more often to issue a connection error. Unfortunately, there are quite a few reasons for this, and to offer a universal way to solve the problem is not so simple. But in this article we will try to help you troubleshoot when TeamViewer does not connect to another user, gives a network error.

Work in TeamViewer.

How to fix the problem, will be told just below, now it is worth telling how to connect to a computer through TeamViewer, because perhaps you do this not quite right, because of what problems arise.

So, for a start, we start the program itself, following you, you must open the window in which your ID and password in the "Allow Management" column are specified, if not, then, most likely you are not on that tab. At the top of the program, click on the "Remote Control" tab.

Next, to connect to another computer, you need to pay attention to the "Manage Computer" group. In it, you should enter the computer ID to which you will connect, select the connection type (remote or file transfer) and click the "Connect to Partner" button. After that, the window will appear in which you must enter the password, you should tell you another PC.

After all the actions made, the connection must be established, and you will see the OS desktop to which you have connected. If, by following this instruction, you have not achieved the desired result, then try to find a solution below in the text.

The first reason: the version of the program is outdated

The reason for the fact that TeamViewer does not connect to a remote PC may be an outdated version of the software. As you can easily guess to eliminate the problem, you must only delete the outdated version of the program, download a new one and install it.

Having done all these manipulations, try again - everything should work properly.

Second Reason: Firewall

Windows TeamViewer users do not connect to another PC also due to firewall problems. This system utility is able to block the program access to the Internet. To resolve this reason, follow these steps:

Enter the firewall. To do this, open the "Start" menu and in it click on the "Control Panel" button. In the Panel, select Show "Large icons" and in the list, select "Windows Firewall".

On the left sidebar, find the string "Resolution of interaction with the application or component in the Windows Firewall" and press the left mouse button on it.

In the window that appears, you need to find the names of the programs and put the checkboxes in the "Public" column. More accurate this process is displayed in the image below.

After all the manipulations done, click "OK" to apply all changes, and try to connect to the remote PC again. The problem when TeamViewer does not connect, should abyss.

The third reason: problems in the Internet connection

Knowing how to connect with TeamViewer to another computer, it still does not always manage to do due to network problems. The reasons why the Internet you do not work properly, maybe a lot. The culprit can act as a provider, and maybe everything is impossible to say everything because of the mechanical breakdown. Now we will tell you how to check the Internet connection on your computer to make sure it is a malfunction or not:

On the right side of the taskbar, click on the Internet connection indicator.

In the low window that appears, it will be written if there is an internet connection or not.

Here is such a simple instruction in two stages. If instead of "connected" something else is written, then feel free to call the provider so that it suggests you solving the problem solving.

Fourth Cause: Technical Work

Continuing to understand how to connect via TeamViewer to another PC if an error appears, we cannot ignore the availability of possible technical works of the program servers. To make sure that you need to go to the developers website - usually when planned work is held, the site hangs about it. If this is true, then you can only wait - by the way, the site may be written the time of approximate endings.

Five Cause: Program breakdown

After passing all four possible causes of faults in connecting the program, finally you can only assume that the program itself is a program. It is not known for sure why this happens and what is connected with this, however, "treatment" is known for such a problem. By the way, it is similar to the first reason: you need to fully uninstall the program, then download it again, must from the developer's official site, and install back to your computer. After completing all these actions, try to contact the other user again, this time everything should be successful.

Conclusion

So we disassemble the five most popular reasons for which the program issues an error when connecting to another user. I want to believe that some of them will help you, however, to great regret, there is a possibility that the reasons for more than it was given in the article.

TeamViewer is a fast and secure integrated solution for receiving remote access to computers and networks. Due to the many effective features for remote access that simplify remote control, conducting online meetings and cloud support services, there are a number of resources for demonstrating all TeamViewer features. Having studied the available user manuals, instructions on top of work and general practical instructions, you will learn about all TeamViewer features. IT unit or supplier of managed services that uses this comprehensive solution is at its disposal all these intuitive functions, such as Wake-On-LAN, access to autonomously working devices and appointment of applications.

Make the initial TEAMViewer setting very easily: just install the software, specify the purpose of use (commercial or private use), create a name and password for your computer and write them down for use in further work. After the installation process is completed, you will be redirected to the TEAMViewer main page, which is divided into two tabs: remote control and online meetings. From here you can manage the various functions described below.