Installing and configuring IPTV Player - a convenient way to view television on a PC. How to watch IPTV on a computer: Installation and player setting Download program for IP TV

This is a new generation of television, the broadcast of which occurs in data networks by IP protocol.

Technical opportunity

The service is available in viewing mode on a personal computer.

Instructions

K-Telecom Player

You need to download and install

This program allows not only to watch television, but also displays the television channels available for viewing, on most of which there is a TV program.

VLC player

If there is a desire to watch IP TV via the VLC player, you can download play List for VLC player , as well as

Solving problems with IP-TV

1. If you are using the router, the causes of the problems in the operation of the IP TV may be several (the router does not support IP TV or it is not configured). Therefore:

Connect the cable directly to the computer, configure the VPN on the computer and turn it on
Set up router

2. If you do not use the router, then go to clause 3.

3. Disconnect all protective programs. IP TV does not work with some antivirus programs. For example, Kaspersky, Avast (block IP TV).

Note:

If you use a VLC player to view the IP TV, then when you run a VPN connected, it will not work.

Notes

1. Use the IP TV service can only individual subscribers connected to the Internet from LLC "to Telecom" with technical capabilities. View programs are possible only on the computer.

2. To simultaneously access the Internet and IP TV, you must use the first link to the player.

3. When accessing the Internet using Wi-Fi-routers, poor-quality programs are possible.

4. Additional subscription fee for IP TV service is not charged.

One of the popular ways to view Internet television IPTV on Windows devices is to use the IP-TV Player free player. IP-TV Player is a casing of the well-known VIDEOLAN VLC media player, which is adapted specifically by view IPTV.

In this article we will talk in detail about its configuration and capabilities.

1. Downloaded

Some providers - IPTV providers - on their websites can upload modified IP-TV Player assemblies with an integrated playlist of TV channels in order to maximize the process of setting up the player, thereby assigning to its customers. Why not take advantage of such a service provider? On the site of the latter, instead of the playlist, you can download the installer of the modified player and during the installation process to use the preset settings.

If the provider did not show care about his clients, the original IP-TV Player assembly can be downloaded from the official site of the Borpas.info/iptVPlayer player.

2. Setting up playlists

The original IP-TV Player assembly is supplied with the possibility of selecting built-in playlists. At the final stage of installing a player in the column "Select Provider", you can, without changing anything, leave the pre-installed item "Internet, Russian TV and Radio". This is a playlist for a wide audience of users (regardless of their provider) with a selection of federal channels and radio stations. The contents of this playlist will be completely available only to residents of Russia, users of other countries access will not receive all the TV channels of the list. This option can be used if the provider does not provide an IPTV service or, for example, makes it at an additional cost. If the provider is an IPTV provider, it can be searched in the drop-down list of graphs "Select Provider". The creators of the IP-TV Player offer the selection of playlists of the largest providers of Russia and Ukraine.

If there is no needed provider in the drop-down list, you must select the second option of settings and enter either the web address of the platform of the provider, or using the View button at the end of the line, specify the path to the ".m3u" file. The web address or file ".m3u" playlist must be pre-obtained on the provider's website. The same option is used for any IPTV playlists downloaded on the Internet.

After setting up the IP-TV player player starts. To select one or another TV channel to view, you must first display the list of channels in the player window. This is done by either a double quick press of the ENTER key, or a single press of the L key, or the button on the player toolbar. The list of channels is removed by the last two ways.

How to change the configured playlist in the future? Click the settings button on the IP-TV Player toolbar (or Ctrl + P hotkeys) and in the appeared window, set the display tick of all settings.

The player will restart with the extended list of settings. Work with playlists is carried out in the General tab. Here you can select the "Load the preset from the list of providers" and exit the configuration step with a drop-down list of providers, as when installing the player. And you can enter another playlist web address in the empty field or use the view button to specify the path to it if it is stored on the computer in the .m3u file. After that, you must click the "Update" button.

Another setting for playlists is "switching between channel lists", it allows you to add different playlists to add different playlists to add different playlists to add different playlists to switch between them.

3. List of favorite channels

IPTV playlists may contain more than 100 TV channels, because the creators of the IP-TV Player have provided the ability to form custom lists of favorite channels. When choosing a TV channel, an empty heart will be displayed on it. Clear on the heart fill it up, and the TV channel will fall into the list of favorite channels. Access to this list opens at the top of the list of all channels, in a small menu.

4. Surfing channels

The surfing function of the channels is designed to automate the search for interesting TV content. To run it, you need to inside the player (on the video), call the context menu and select the appropriate option. A network of TV channels will appear in the IP-TV Player window, and each of them will be turned on for a couple of seconds. As soon as interesting TV content is revealed, in the context menu, a tick from the Surfing Options can be removed.

5. TV program

To see the TV program on the selected TV channel for the coming days, you must need a button in the form of a clock on the player toolbar or G. Hot key

6. Aspect ratio

If the image of the TV channel is overshadowed with black mourning strips along the edges, you can experiment with the change of the aspect ratio. When you press the F6 key, different options for the side of the parties will be applied for a playable image.

And the key F7 picture is wed up in width to the size of the player window or to a full-screen mode.

7. TV channel settings

And with the aspect ratio, and with other parameters of each individual channel can be experimenting in the player settings. Turn on the desired TV channel, click the settings button on the toolbar (or the hot keys Ctrl + P), switch to the "Channel" tab. It adjusts the contrast, brightness, saturation, shades of the image, deinterlace, the audio track (for TV content supporting multichannel audio tracks) and other parameters.

The selection of the audio track language is configured in the General Settings tab.

8. Creating screenshots

The image played in the IP-TV Player window can be captured by creating a screenshot using the corresponding button on the player toolbar or by pressing the hot F4 key. To create screen shots immediately with the desired size, the creators of the player provided the "Video Size" option. This option offers a selection of several screen resolution options that will be automatically installed for a picture played by IP-TV Player.

If the screenshots need to do a lot in the player settings, in the General tab, you can specify a specific way to save them. The same path will be used for maintaining video recordings of televisers. Below this setting is another - "container format", in it from the drop-down list you can choose the format of the media processer in which the video recording of televisers will be recorded.

9. Video of televisers

In most cases, for video recording of televisers, it is worth leaving the preset format of the PS media processer. In this case, the output video will be saved to the MPEG universal video format.

For video recording of televisers on the player toolbar, there is a red button that runs the TV show on the current TV channel and stops it. But the creators of the IP-TV Player went on this function and provided the possibility of video recording of several televisers in the background. If the pad is obtained, and your favorite TV shows on different TV channels are broadcast at the same time, one of them can be viewed online, and another (and even a few TV shows) - write in the background operation of the IP-TV Player. To do this, on a writable TV channel (in the channel list on the right), you must call the context menu, select "Write in the background" and assign the recording time - a specific interval or to stop the user manually. And you can switch to another TV channel or close the player at all. If there are active television recording processes, IP-TV Player will come to the system three, where, without feeding any signs, it will carry out its work in the background. You can stop the telestir recording (or several televisers) by calling the scheduler window. The latter appears when you click the "R" recording icon on a writable TV channel. The scheduler can also be called using the context menu in the player window.

10. Increased cache size

If there is rolling during IPTV broadcast, you can try to solve the problem by increasing the IP-TV Player cache size. In the General Settings tab, in the last column "Cache (millisecond" from the drop-down list, you need to choose more value than the pre-installed - starting from 1000.

IPTV is "Internet television", which provides television content, radio and music.

There are hundreds of players to view IPTV. Today I will scatter the pros and cons of the most popular and tested of them.

What is the IPTV player to choose?

Attention! All programs are free. If you are asked to pay - do not trust the site and download the application from the official source.

5. VLC Media Player

VLC is a universal program that is installed on all computers. In addition to managing the usual media content (music and films), VLC Media Player also makes it easy to view .M3U playlists.

Steps to start IPTV in player:

Open VLC.
Go to Media\u003e Open URL
Enter the site address or file location on your computer
Run the file.

There are no many functions in the program, but if you just need to run a film, music or IPTV, and there is no desire to load bulky alternatives, then VLC is an excellent choice.

Pros: Easy, high speed, understandable interface.
Minuses: lack of functions, inability to install additions.

4. MyipTV Player.

MyIPTV is available free of charge in the Microsoft Store store, so you can not doubt its security.

Go to Microsoft Store and type (without brackets): "MyIPTV". Click on the application to install it.

Run the program
Open Settings\u003e Select the option "Add New Playlist and Choose EPG Source"
Write the source address
The main menu will appear video and TV.

Pros:Thoughtful interface, support for multiple playlists, convenient sorting of sources.
Minuses:english.

3. Perfect Player.

Perfect Player is another IPTV player, which consistently gets good user reviews.

The player is stable, has all the necessary functions, support for plugins and a pleasant design. Playlists are automatically updated each time the application is started, which is pleasantly surprising.

2. Ott Player.

The main advantage of its advantage is a variety of online opportunities. For example, you can download the playlist once and turn it on on multiple devices without additional configuration.

If you are busy during your favorite transfer or team match, simply check the channel to write and see later. Yes, OttPlayer is able and so!

How to configure ottplayer?

Create an account on the site https://ottplayer.es
Enter the account using the login and password that you were sent to you by mail
Download the playlist to the program website
Download the player and log in to the computer to attach to the account
Enjoy watching!

1. Kodi.

Cody is the most popular player to view IPTV. He deserved his fame due to incredible functionality.

In it, you can watch TV channels, movies, listen to radio and music, play games and much more.

Pros:multifunctionality, the ability to install additions, unique features (for example, full-fledged games).
Minuses:bulkness, not suitable for old devices.

conclusions

The above-described programs are the best IPTV players for Windows.

Each of them has features, so when choosing you need to repel from your needs:

Simplicity and speed - use VLC Player or Perfect Player.
Synchronization, ether record and similar online functions - ottPlayer.
Powerful, multifunctional "Combine" - Choose Kodi.

View IPTV on your computer is available to Internet users in special packages from the provider. But not everyone is ready to pay separately access to the network and to television channels, so methods for bypassing packages are created.

About how to watch IPTV on a computer, having only an internet connection, then.

How to watch IPTV on PC

In order to watch IPTV on a computer for free, no purchase of the console is required. Next set:

Stable high-speed network connection.
Player with the ability to connect to broadcasts.
Claimed playlist from TV channels.

The software for viewing IPTV on a laptop is freely available. Consider which programs are suitable for this.

Selection and Player Installation

View IPTV on a laptop or computer is possible through programs:

Install applications for viewing channels via the Internet simply simply, if you use the instructions below.

VLC Media.

Watch IPTV on a computer FREE using VLC Media can users of Windows. More information about the installation:

First you need.
Install the program to the computer. To do this, open the installation file, and determine the language as "Russian".
Answer the standard questions "Installation Wizard". To view IPTV on a PC with default settings, most often will need to just click "OK" after the installer offers.

Installation takes no more than 10 minutes, but to view the Channels, you need to carry out additional settings.

Open playlist in VLC Media

To view the IP TV you will need to find a link to the M3U playlist or download the file of this format. Such playlists with the list of channels are on the Internet in free access. VLC MEDIA allows you to add multiple M3U files. To play a previously prepared list of channels in the VLC Media player, follow the instructions.

If you downloaded playlist:

Additionally, you can adjust the size of the picture:

Open the menu item " Instruments", Select the tab" Settings».

In line " Customized interface size under video»Remove the tick.

IP-TV Player

Need to .
The IPTV setting is at the very beginning, so open the "EXE" file, go to the "Settings" section, disconnect the checkboxes from all rows with additional programs.

Click on the "Install" button.
To insert a playlist, select the "Channel List Address" section.
Check the box "Update Channel List at Run" box.

You can watch TV using channel control keys that are below. The list itself is located on the right.

PC-Player Tvip

View IP TV on PC is possible through the PC-Player TVip program. The advantage of this software before the previous - functions for recording stream and connecting to encrypted channels.

Open the provided link to.
To install the player to view IPTV on your computer, run the downloaded file.
Press "Next" when new windows appear.
Try running the program.

The question of how to configure IPTV on the computer through the PC-Player TVIP program, occurs after unsuccessful startup. If it is accompanied by an error of unsuccessful definition of the type of connection, then the instruction is required:

Click on the "Configure Proxy" button in the error window.
In the UPD Proxy field, select "Use", in the Server string write the IP address of the provider, select the port number "4022".
Click on the confirmation button.

Now IPTV on the PC will be available.

Advantages and disadvantages of viewing on a computer

Aipi television is chosen due to a number of competitive advantages over cable or satellite TV. Among the strengths:

IP Television Available for Internet users without purchasing additional devices, such as consoles, it is enough to connect a PC to the Internet, set the software and download a list of channels that can contain up to 400 positions.
Viewing channels through the computer allows you to use the recording function, which provides the ability to rewind the broadcast of the TV channel a few days ago. In this case, the set of channels can always be changed or expand to view the content of interest.
If you compare IPTV with analogue television, then the Internet connection is able to provide broadcasts in the best quality. Most channels are broadcast in HD format.

At the same time, the free method of viewing TV has its drawbacks:

To view a high-speed Internet connection, which can cost much more expensive than the payment of the TV operator services. At the same time, the high load load is displayed on the signal quality. Broadcast will begin to "slow down" or stop loading at all.
A small laptop or computer screen will not be compared with a large plasma TV, so you are not always easy to view the broadcasts of the TV channels. This problem is solved by connecting TV to PC. But such a solution will not be able to simplify channel management, which is carried out only through the program interface.

Similar disadvantages cause certain inconveniences, but do not reduce the number of users looking through IPTV for free.

Any of the described programs is available for connecting. Files with a list of channels can be found on the Internet or make themselves.

Hello! In this article, we will continue to continue viewing the television channels through the World Wide Web. And now the author will tell you about one small, but incredibly cracked application.

Therefore, the essence of our narration briefly can be designated as follows: IP-TV Player - program for viewing IPTV On a computer running Windows. Let's talk about where it can be downloaded and how to configure it.

The installation itself is standard, only here there is one small trick from the developer. He tries to impose you also additional software that is not connected with watching television online. So be careful:

How can I understand, additionally need to install a special application on your smartphone, which is called IP-TV Remote. In practice, the work of such a scheme The author of the article did not check, but you can see the videos in the video:

So, comrades, of course, all this is good. But before that time we looked at IPTV Player`e only free playlists. And what to do if we have a sheet? How can I see it? Yes, in fact, it is very simple.

To do this, open the menu of the main settings of the program:

And select the item "Load a preset from the list of providers":

Now in the window that opens, you need to select the Count Channel Address Count and specify the URL of your playlist, or download it from the computer:

And all on this, as they say, the case is done:

And in the address of the list of channels, now our local file is grunt:

So, as you can see, everything is very simple and cool. At this step, it can be said that the IP-TV Player is a program for viewing IPTV on a computer, really very cool and multifunctional. And besides completely free.

And at the end of our fairy tale with a happy end, I bring to your attention one entertaining video about very crazy handles.