Not rarely, especially the students have such a question, how to remove the page number from the title checklist or course work written in the Microsoft Word text editor?

After all, the writing rules oblige not to numbered the title page of the work performed.

Some students find a very original way out of this situation, closing the figure in the color of the background.

A good way, but has a little disadvantage, the figure may accidentally move when viewing, but as an option, so I do not exclude it and it has the right to be another way described in this article.

Get cachek 57% for the first purchase in Aliexpress, and with all subsequent guaranteed 12%

Rather!

You will also learn how to start a page counting with any numbers you need. How to change Arabic numbers to Roman or even put letters.

And finally, the last removal of numbering from all pages of the document.

How to remove page number Method 1

1. On the main page to choose "Insert".

2. Page number.

3. There are several tabs here, where exactly will be solved on the pages of your document document.

We will analyze on the example the second tab "At the bottom of the page" when you hover the mouse cursor on the left pops up with four samples of room locations, left, in the middle, reply and number with a vertical line.

4. Double-click the left mouse button, select any of the four tabs, the numbering of pages will immediately happen to the location of the numbers that you chose.

Now to remove the number from the title leaf simply set the "Specific footer for the first page" checkbox, after which the number 1 will disappear if the disappearance did not happen then you need to highlight a single and press the DELETE key twice.

Next, in the upper left corner of the Word editor, select the file button.

Here you need to choose to save as, (if the document has been saved earlier and has already a assigned name, you just click just save item).

A window will open where you want to assign the name and type of file.

Method 2

We go into the insert -\u003e Figures, choose any way of an indenticial click on it, should appear instead of a cross cursor, clamp the left mouse button and do not releasing the figure.

I chose a rectangle if you suddenly decide to change the size of the created figure, then click once on the figure of the LKM on its perimeter will appear on one of them the cursor to one of them until the two-way arrow appears on the appearance of the mouse button and pull the left button and dragging or reducing the figure.

You can turn the figure in any direction by clapping the left mouse button on the green point on the figure.

Change the color and contour of the figure

To do this, we make a double click on the figure on it, the labels will also appear as in the first case, which means how you already know the possibility of formatting, and the menu will appear at the top of the page with the parameters you need to replace color.

We need two top points. This fill of the shapes choose the color in our case it is white, right there our rectangle will take the selected color, to leave the circuit that is also removed by this scheme.

Before bleaching the contour, move the figure to the place where it should be in order not to lose it on a white background.

Moving is done by hovering the cursor to the shape and clamping the mouse button while the figure will not be in the right place. This is how the passage of my text with the figure imposed on it looks.

If you need to cancel the last action and return to the previous one, you need to press Ctrl + Z, and if you returned back, but decided it was still better to help Ctrl + Y (about the options for writing keys and not only you recognize C) .

In the upper left corner of the screen, there are also two arrows perform the same functions as the combination of keys, which in some cases can be more convenient.

Page format page

Sometimes it is necessary to register the pages not by Arabic numbers and Roman or in general letters may still need to start counting not from one or for example from the figure 3 or any other, therefore, we continue further.

We go on the rolling path already, insert -\u003e page number -\u003e Format number of pages. (Lower item Delete page numbers, respectively deletes all numbers)

And we start the desired number of the number of the number, and you can also put it from which digit to start counting, unforgettly click OK to save the settings.

At this, I complete this guide on how to remove the page number, from the title leaf in two ways.

We look at an interesting video about Planet Mars.

The numbering of pages in the Word for the usual document is very simple, but when there is a need to put page numbers in your own footers or make a double numbering of pages, there are already some who are already sad.

In fact, there is nothing complicated. I suggest to do a little practical work, after which you will become more fun and easier to work.

Simple numbering of pages

To begin with, a few words about how to numbered pages in the Word for those who are facing this for the first time:

In the top menu ribbon we go Box → Page Number → Top Page → Simple Number 1

Of course, you can choose absolutely any location and page numbering style, my choice is due to the compactness of the pattern. That's actually, everyone, let's go further to get acquainted with more interesting things.

Pie numbers in footer

The fact is that the number of pages in Word is inserted into footers, and if there are own, the previous method does not fit, because The document will be all siques-nozzles.

Useful. If you are floating in the concepts of footers and partitions in Word, I strongly recommend reading the articles: "footer in Word" (see) and "Sections in Word" (see).

How to Number Pages in Word

So, proceed and do everything in order:

1. Downloaded file for practical work.

2. Go to the edit mode of the top of the first page of the contents (find it difficult, see).

3. Install the cursor in the rectangle in the upper right corner and press the key combination Ctrl + F9., then will appear { } .

4. Write to these brackets or copy the code Page .

5. Press the key combination Alt + F9.This is displayed by the code value.

6. Exit the editing mode of the footer (find it difficult, see).

7. Since, in our example, a special footer for the first page, then it is necessary to do this for subsequent content pages. Go to the second page and do.

8. Numbering was set, but as a rule it starts not from the first page. Navigate to the edit mode of the first page footer and selecting the page number Going to the top menu tape Insertion → Page Number → Page Format ... And specify that the numbering of pages start with 4.

Thus, end-to-end numbering for subsequent sections of the explanatory note and applications are affixed. For simplicity, you can copy the content page number, in the mode of keyboard editing mode, and insert into subsequent sections.

Double numbering pages in Word

Thus, with end-to-end numbering of pages in the Word, it was understood, but it is necessary to put the numbers of the sheets of each partition separately for content, notes and applications.

Let's step by step, from simple to complex, slowly continue:

9. Navigate to the edit mode of the second key of the content and place the cursor in the lower right corner to the appropriate place.

10. Insert the code into this cell. (\u003d (Page) -3) Similarly, creating curly brackets with a key combination Ctrl + F9.. Page 2 It turned out to reducing the value of the current page to 3, which is seen from the code.

The result can be checked by adding the content page.

Numbering pages in Word for pros

The previous method can also be applied to the numbering of subsequent internal partition pages, but the problem is that you constantly have to control the number of the last page of the previous section. Damn, I would probably rested here, head starts head.

Let's like this in this example, the second page of the explanatory note section 7, then get the internal numbering of the second page will have so (\u003d (Page) -5) if the number of content pages will increase by one, then the number of the second page of the note will be 8, and the inner will have to register as (\u003d (Page) -6) .

You can automate it, do consistently, and everything will become clear along the way:

11. Include the visibility of hidden characters by pressing the corresponding button on the main tab of the top menu, and allocate the line completely

::::::::: Section break (from the next page) :::::::::

This inscription must be installed on a separate line, otherwise transfer it by setting the cursor first and press ENTER. To highlight the cursor should be done from the beginning to the end of the points, or click opposite the lines behind the sheet space.

12. With a highlighted string in the top menu Insertion → Bookmark In the "Bookmark" window we write r1 (Modifying 1, Latin without spaces), set "hidden bookmarks" and click "Add".

13. We go to edit a header of the second page of the explanatory note and in the page number insert the code (\u003d (Page) - (PageRef R1) .

It follows this: code (Page) Specifies the page number in our case 7, and (PageRef R1) Page number with cross-referenced section created on the section, which on page 5, so the internal page number is calculated as the page number minus the last page number of the previous section, i.e. 7-5 \u003d 2; 8-5 \u003d 3; 9-5 \u003d 4, etc.

14. Do similar actions for the application partition yourself by adding the bookmark r2 On the separation of the section at the end of an explanatory note.

Last Page Numbering

Go successively to the first page of each partition, and in the cell under the inscription "Sheets" in the lower right corner, put the code SECTIONPAGES . This code will display the total number of pages in the section. If you need to output the total number of pages in the document Insert the code (NUMPAGES) .

It happens that Word will slow down and does not always update the fields with codes, for the forced update, click twice shortcut keys Alt + F9..

I remind you that the brackets for inserting the code are caused by a combination CRTL + F9., and calling values Alt + F9..

Bonus. Well, at the end, if there were difficulties, you can download the document with the finished result that clicking.

Interesting. How to make a Word automatic table. Read.

Numbering pages in Word. Video Tutorial

It will be necessary as soon as the time will appear ...

Today we will partially consider the search system Yandex.

Its main page is the face of the entire system and literally by the portal in the amazing world of the search engine, which occupies a leading position in RuNet.

About the causes of leadership to tell now there is no point, because the topic of our article is somewhat different, but if in a pair of words, then Yandex:

• Helps the user
• Friendly even for beginners
• Easy to use
• Uses a unique ranking system
• It has its own development path and tries to bring something new.

The system launch took place back in the ninety-seventh year during the presentation at the SoftOOL exhibition.

And at that time, Yandex coped with the morphology of the Russian language without any problems, looking for the necessary information to the user, given the distance.

And also had its own algorithm for the relevance of this or that page of each site that has passed the indexation.

First acquaintance with the main page

In order to get to the main page of Yandex, it is enough to enter in the search bar of the WWW Yandex or WWW Yandex RU or RU.

Well, if you are too lazy or you are full of impressions to enjoy the unprecedented spectacle - just write "Yandex" and click on the first link that will fall in search.

So, we are on the main page. It must be said that since its appearance this search engine, the main page changed very often.

And all because the developers carefully follow the modern trends and desires of users.

Based on all this, as a designer, a page is going to make as much as possible to what we are accustomed to call the word "convenience" or "comfort".

After hitting the page for the first time, you first please pay the top of where the strip will open offered to download the adapted Yandex.Bruezer browser, equipped with special protection technology.

Tip!Despite the fact that Yandex.Browser is well developed and "sharpened" for all the desires of a simple user, someone will not want to swing to him, and the upper strip will distract from important information. In this case, you can pay attention to the upper right corner of the page, where there is a "Close" button, made in the form of a cross. Click on it, and you will no longer see the annoying strip, offering to make an unnecessary action for you.

Of course, after a while she may appear again, but you will already know exactly what to do with it.

Well, or she will repulse you and you still decide to download Yandex.Browser at least for interest.

At the end of the review, by the way, we will provide you with a video with a detailed configuration of this browser.

Make Yandex by the main page in the browser

You may have a question: "And how to make the main page of Yandex constantly in my browser and I did not have to keep it constantly?".

You can do it absolutely free!

Thoughtful developers took care of it, so if you look at the top left corner of the page, you can find the link "Make Start".

Press you will be offered to install a special extension and ready - the start page!

Tip! Pay attention to the picture above. The first elder (left) shows the main link that allows you to make Yandex start page of any browser. However, if you use the Google Chrome browser, you can jump out a convenient ad (arrow on the left), which will help with installing a special extension, which will quickly make Yandex the main search engine in the browser. After that, every time you want to walk on the Internet, your favorite Yandex home page will automatically be loaded.

Indicate your location if Yandex has not defined

After small manipulations with the browser, we return to the page and see that in the same left upper corner there is a city in which you are now.

The system automatically determines it and gives you information that is most relevant to the place in which you are now.

But it can happen that Yandex will make a mistake and give you the wrong city.

So, if you are still interested in Yandex search engine, we will continue. We are transferred to the right upper corner of the page and see several links there.

They allow:

• on which there will be a page

• having attached it to himself

• Get mail if you do not have (there is a button "")

• Log in using the "Login" button after registering or using a profile in one of the social networks

Tip! Registration in Yandex is fast and convenient. We advise you to use it, because it will allow you to use the additional features of the system, as well as save all the changes you made in the settings.

News in Yandex

Having understood with the top of the page, moving closer to the middle. Before your eyes, as you notice, the "News" will appear.

Initially, there are news, which are relevant to the country in which you are.

If your country is Russia - all news that occurred in today will be shown. If in Ukraine - the corresponding content will be shown.

However, if you have more interesting news regarding the area in which you live, just click on the link next to the link "News", which is called as your area.

In our case, this is the "Dnepropetrovsk region".

And to the right of the news, the company's advertising banners of Yandex are broadcast, who either help in some trifles, or tell about some new products of the company and its partners.

• More detailed news

Search row Yandex

In the center of the main page of Yandex, the main thing is the logo of the search engine and the search string in which users enter their requests.

And the truth is that you have introduced in the search bar, you will definitely have dozens, or even hundreds of options for sites where you will definitely find the desired.

On the left is shown map of the city, timetable of trains and television program, which allows you to find out which movies can be looked right now and is it worth being distracted by the TV.

At the bottom of the page, there is practically nothing useful for a simple user, however, experienced users will find the references mentioned there are important and necessary.

Among them, the link to Yandex.Direct (by the way, it is this system that brings a search engine a lion's share of profit), a link to the metric and the page with the order of advertising.

And it is only in the left side.

On the right side you can find a button in the form of a question mark that takes to the page with the FAQ on the system and its services.

Conclusion

This is the main page of the Yandex search engine.

We hope that our brief overview will allow you to at least familiarize yourself with it, get used to work with search and other "goodies" that this page offers.

Use Yandex and always be aware of events!

Promised at the beginning of the video with the setting of Yandex.Bauser:

Settings Yandex Browser

I will show how to configure Yandex browser and show its capabilities and features. I especially like the possibility of translation of words in the browser.

A task

Place the background pattern in the right lower corner of the web page without repetition.

Decision

To control the position of the background pattern on the page, the page is applied to the style of the Background-Position, it simultaneously sets the image coordinates horizontally and vertical. To cancel the repetition of the background picture, use the Background-Position property with the NO-REPEAT value. At the same time, all these properties can be replaced with one universal background, which sets the path to the graphic file, the position of the picture and the method of its repetition, as shown in Example 1.

Adding background pattern to the Body selector has one feature. The picture will be located at the bottom of the page, and at the bottom of the block with content, which is especially noticeable with a small text of the text or an increase in the size of the browser window. By setting a 100% height for the HTML selector, thereby providing the background positioning in the lower right corner of the browser window.

Example 1. Position of the background image

HTML5 CSS 2.1 IE CR OP SA FX

Canned tomato

The fruits are taken with good smooth color, dense and homogeneous in size, laid into the banks and poured with boiling brine (per 1 liter of water - 35 g of the cooking salt and 6 g of citric acid). Banks are covered with covers and put on warming up, withstanding in boiling water: liter - 5-8, three-liter - 12-15 minutes. Then they are collapsed and cooled.

Approximate consumption of raw materials and products on a liter can: Tomatoes of red selected - 550-600 g, salts - 15 g, citric acid - 3 g.

The result of this example is shown below (Fig. 1).

Fig. 1. Background picture in the lower right corner of the window

In this example, the image is positioned in the right place using the Right Bottom values. The Background property. To the text is not displayed on top of the picture, the retreat is added to the page from the Margin-Right. The image itself that was used in the current example is stored in JPEG format and demonstrated in Fig. 2.

Fig. 2. Images to create the background on the web page

Positioning is one of the key concepts in block layout. Having understood with him, you will become much clear to you, and the layout of shamanism will turn into a meaningful process. So, the article will go about CSS properties position and float..

1. Position: Static

By default, all items on the page have static positioning (position: static), this means that the item is not positioned, and appears in the document at its usual place, that is, in the same manner as in the HTML markup.

There is no need to specifically assign this property to any item, unless you need to change the previously installed positioning for the default.

#Content (Position: Static;)

2. Position: relative

Relative positioning (Position: relative) Allows you to use properties: TOP, Bottom, Left and Right, for the location of the item relative to the place where it appears with normal positioning.

Let's move #Content on 20 pixels down and 40 pixels left:

#Content (Position: relative; top: 20px; left: -40px;)

Please note that on the place where our #Content should be located is now an empty space formed. Next at the #Content block, the #FOOTER unit has not moved below, because, #Content still takes her place in the document, despite the fact that we moved it.

At this stage it may seem that relative positioning is not so useful, but do not rush with the conclusions, then in the article, you will learn what can be used for.

3. Position: Absolute

With absolute positioning (Position: Absolute), the item is removed from the document, and appears where you tell him.

Let's, for example, move the block # DIV-1A to the upper, right corner of the page:

# DIV-1A (Position: Absolute; top: 0; right: 0; width: 200px;)

Please note that this time, since the block # DIV-1A has been removed from the document, the remaining items on the page are different: # DIV-1B, # DIV-1C and #footer moved above, to the place of remote block. And the block # DIV-1A itself is accurately in the right, upper corner of the page.

Thus, we can position any element relative to the page, but this is not enough. In fact, we need to position # DIV-1A relative to the parent block #Content. And at this stage, relative positioning again comes into the game.

4. Position: Fixed

Fixed positioning (Position: Fixed) is a subsection of absolute positioning. The only difference is that it is always in the visible area of \u200b\u200bthe screen, and does not move during the scroll of the page. In this regard, it is a bit similar to a fixed background image.

# DIV-1A (Position: Fixed; top: 0; right: 0; width: 200px;)

In IE with Position: Fixed is not so smooth, no matter how I wanted, but there is many ways Bypass these restrictions.

5. Position: Relative + Position: Absolute

Having assigned a relative positioning unit #Conent, we can position any child elements relative to its borders. Let's place a block # DIV-1A, in the upper right corner of the #Content block.

#CSOLUTE (Position: Absolute; top: 0; right: 0; width: 200px;)

6. Two columns

Armed with knowledge from previous steps, you can try to make two columns using relative and absolute positioning.

#CSOLUTE; TOP: 0; Right: 0; width: 200px;) # DIV-1B (Position: absolute; top: 0; left: 0; width: 200px ;)

One of the advantages of absolute positioning is the ability to place elements in an arbitrary order, regardless of how they are located in the markup. In the example above, the block # DIV-1B is located before block # DIV-1A.

And now you had to have a question: "But where are the remaining elements from our example?". They disappeared under absolutely located blocks. Fortunately, it is possible to fix it.

7. Two columns with fixed height

One solution is to set a fixed height of a container containing columns.

#Content: 450px;) # DIV-1A (Position: absolute; top: 0; right: 0; width: 200px;) # DIV-1B (Position: absolute; top: 0; left: 0 ; width: 200px;)

The solution is not very suitable, since we never know in advance how the text will be located in the columns, and what font will be used.

8. Float.

For speakers with a variable height, absolute positioning is not suitable, so let's consider another option.

By appointing the Float unit, we will most possibly push it to the right (or left) edge, and the text next to the block will contend it. Usually this technique is used for pictures, but we will use it for a more complex task, since this is the only tool available at our disposal.

# DIV-1A (Float: Left; width: 200px;)

9. "Floating" columns

If you assign Float: Left to the first unit, and then the second Float: Left, each of the blocks will fit to the left edge, and we will get two columns with a variable height.

# DIV-1A (Float: Left; width: 150px;) # DIV-1B (float: left; width: 150px;)

Also, you can assign columns as opposite to the Float value, in this case, they will be distributed along the edges of the container.

# DIV-1A (Float: Right; width: 150px;) # DIV-1B (float: left; width: 150px;)

But now we have another problem - the columns go beyond the parent container, thereby breaking the whole layout. This is the most common problem of novice versions, although it is solved quite simply.

10. Cleaning Float.

Floate cleaning can be done in two ways. If after the columns there is another block, it is enough to assign Clear to him: Both.

# DIV-1A (float: left; width: 190px;) # DIV-1B (float: left; width: 190px;) # Div-1C (Clear: Both;)

Or assign the Overflow property to the parent container: Hidden

#Content (Overflow: Hidden;)

In any case, the result will be the same.

Conclusion

Today, only basic positioning techniques were considered, and the simplest examples. Also, to help novice makers, I always recommend the cycle of articles Ivan Sagalaeva, who at one time helped me a lot.