Entrance to the BIOS on Lenovo laptop. How to enter BIOS on Lenovo G510 laptop

Good day.

Lenovo is one of the most popular firms manufacturers of laptops. By the way, I must tell you (from personal experience), laptops are quite good and reliable. And there is one feature of some models of these laptops - an unusual input to the BIOS (and it is very often necessary to go to it, for example, to reinstall Windows).

In this relatively small article, I would like to consider these features of the entrance ...

Login in BIOS on Lenovo Laptop (Step-by-step instruction)

1) Usually, to enter the BIOS on Lenovo laptops (on most models), it is enough when it is turned on to press the F2 button (or Fn + F2).

However, some models may not even react to these presss. (for example, Lenovo Z50, Lenovo G50, and in general, model range: G505, V580C, B50, B560, B590, G50, G500, G505S, G570, G500E, G580, G700, Z500, Z580 may not respond to these keys) ...

Keys to enter the BIOS for different PC and laptop manufacturers:

2) At the above models on the side panel (usually next to the power cable) there is a special button (for example, the Lenovo G50 model. 2).

To go to the BIOS you need: Turn off the laptop, and then click on this button (the arrow is usually drawn on it, although I admit that on some models the arrows may not be ...).

By the way, an important point. Not all models Lenovo laptops This service button is located on the side. For example, on the Lenovo G480 laptop, this button next to the laptop's power button (see Fig. 2.1).

3) If everything is done correctly, the laptop should turn on and the service menu with four points appears on the screen (see Fig. 3):

BIOS SETUP (BIOS settings);

BOOT MENU (boot menu);

System Recovery (Emergency Recovery System).

To enter the BIOS - select BIOS SETUP (BIOS installation and settings).

By the way, it may be necessary for someone: in Fig. 4 shows the Lenovo G480 Boot Boot section settings for installing Windows 7 on it:

Boot Mode:
Boot Priority:
USB Boot:
Boot Device Priority: PLDS DVD RW (this is a drive with a Windows 7 boot disk installed on it, please note that it is the first on this list), Internal HDD ...

Fig. 4. Before installing WindWS 7- Setup BIOS on Lenovo G480

After changing all the settings, do not forget to save them. To do this, in the Exit section, select "Save and Exit" (Save and Exit). After restarting the laptop - the installation of Windows 7 should start ...

5) There are certain models of laptops, such as Lenovo B590 and V580C, where the F12 button may be needed to enter the BIOS. Holding this key immediately after switching on the laptop - you can get into the Quick Boot (quick menu) - where it is easy to change the order of downloading various devices (HDD, CD-ROM, USB).

6) And the F1 key is quite relatively rarely. You may need if you use Lenovo B590 laptop. The key must be press and hold after the device is turned on. The BIOS menu itself differs little from the standard.

And the last ...

The manufacturer recommends before entering the BIOS to charge enough laptop battery. If in the process of setting up and installing parameters in the BIOS device will be disabled (due to the lack of food) - it is possible to problems in the further operation of the laptop.

Honestly, it is not ready to comment on the latest recommendation: never experienced problems when the PC is turned off when it was in the BIOS settings ...

Good job 🙂

Almost every laptop owner had to solve certain hardware problems in the BIOS system setup mode. The need to climb into the heart of the computer most often occurs if it is necessary to install the operating system, so the problem of logging into the BIOS is relevant for each active laptop user. Often, it is impossible to go to the basic system setting system due to the banal ignorance of the keys that it is called. In particular, this is relevant for Lenovo series laptops, since the key combinations on this model are almost always unique and do not match other computers. You can enjoy information on how to go to BIOS on Lenovo laptop.

We go to the BIOS on Lenovo laptop

Enter the mode of changing system on Lenovo devices, you can three main hardware methods:

The most versatile method - pressing the F2 key while turning on the system. On some models, you need to additionally press the "Fn" button.
The second way - using the "Think Vantage" key, which is not far from all models
Button "Access IBM", "NOVA" - another version of the hardware mode of mode

Sometimes hardware methods may not work due to the features of the installed operating system. Periodically, problems arise with Windows 8 / 8.1 users. Include BIOS on these systems, you can not clamp any keys through a normal interface. Several easiest ways:

Open the right panel, select the "Options" tab - "Changing Computer Settings" - "Restore and Update" - "Special Download Options" - "Reload Now". After rebooting, enter the diagnostic section, go to Advanced Options and click on "by UEFI"
In the command prompt, type and execute the "shutdown.exe / r / o" command

Exceptions from Rules - Special Lenovo models

If none of the above entry methods in the BIOS approached, you should search for the name of your computer in the list of special Lenovo models, on which the mode is called a specific way.

Lenovo B590.

On this model, you must turn off the system to start the bios, after removing the battery and turn off the disabled device from the power cable for a few seconds. Next, you must click on the small button (NOVA) next to the laptop performance indicator. After starting the menu, select the Russian language and layouts, go along the path "Diagnostics - Advanced Settings - Embedded Parameters - BIOS".

Lenovo G505

On this model, the BIOS can be launched by performing similar to the previous version, as well as using the "Fn" and "F2" key combination. Press the keys you need to turn on the laptop. The method is suitable for Lenovo G500.

Probably there are no such PC users who, at least once every time working with a computer, would not need to go to the BIOS. Not left aside and those who use Lenovo products. This manufacturer has a huge list of laptops, and not all of them can be included in the BIOS, but it is easily customized - the functions everywhere are the same. Today we will try to figure out how in Lenovo laptop to go to BIOS, whether Lenovo S9, Lenovo Z50 or Lenovo B50.

Why can there be the need to enter the BIOS on Lenovo? Even though laptop manufacturers in each new released model are trying to minimize PC knowledge requirements for the user and give the most simple answer to the question of how to configure it or establish the cause of problems, nevertheless, sometimes there is a need for a thinner adjustment of the parameters. For which you can use such an input:

Enabling and disable some hardware hardware, problems diagnose;
Configure OS boot parameters and all device;
Setting the Disk Subsystems, in particular, its modes;
Setting the set of other functions, parts or systems in general.

The manufacturer of Lenovo's technician created its own called Lenovo One Key Recovery is a system that includes the ability to back up data on the PC from Lenovo and their recovery. In order to enable it, there is an additional button on the laptop - Novo. It is almost on all the newest models of laptops from Lenovo and is located or on the sidebar of the case, or near the power button. Sometimes, in the most modern models, there is a small hole, inside which the microswitter is. In this case, it is necessary to use a thin non-war item - for example, a clip.

And despite the fact that the direct assignment of this button is not a bios call, still you can get into the BIOS using it:

Turn off the device by pressing the power key for 10-15 seconds;
Hold down the NOVO key for 2-3 seconds and release;
Your laptop is turned on and opens a small menu with a choice - click on the line with the signature "BIOS SETUP".

Entrance to the BIOS on Lenovo Laptop: Method 2

Lenovo's BIOS entrance is carried out in several ways - unfortunately, one solution, how to get to the BIOS, does not yet exist, but it is quite simple to start it. So, go to the first way.

The most popular solution is the use of the keyboard - simultaneously pressing multiple laptop buttons immediately after it starts. Turn off your laptop (with this method enabled), then press the power button and immediately one of the options:

F2 button or DEL button;
Combination Fn + F2;
Key F1.

If the launch of the BIOS was carried out incorrectly, the computer will load the OS as usual. In this case, you will have to turn off it again and call BIOS again, but using the new boot method. In order not to play "Guessing" and run the BIOS faster and faster, you can also look into the instructions for Lenovo laptop.

It also happens that the laptop is too quickly running, and the user does not have time to press the necessary combination. To avoid this, turn off the laptop by pressing the power key for 10-15 seconds. Then hold the desired combination to enter the BIOS, and then click on the power button and release, while continuing to keep the keys with clamping keys to enter the BIOS until you do not appear with the parameters.

How to enter the Lenovo Bios Laptop: Method 3

Approximately at the same time when a new version of the BIOS called UEFI was released, a new Windows 8.1 operating system was published. And with it, a new method of loading bios appeared - through OS:

First you need to go to the desktop. Then we call the Windows desktop menu - for this, lay the mouse cursor to the right lower corner of the desktop. Select "Parameters" - "Changing computer parameters";
Next, go to the "Upgrade and Recovery" menu, and then under the "Special Download options", press the reboot key;
After the reboot was performed, we fall on the screen with the ability to select action. Click on the "Diagnostics" tile, and then - on the "UEFI built-in parameters";
Confirm the selection by clicking on the Restart key. Ready, laptop went to BIOS!

How to go to BIOS on Lenovo laptop: Method 4

If you have Windows 10, that is, another method of loading bios, similar to the previous one. Here it is carried out somewhat differently:

In the "Start" menu, click on "Parameters", select the item "Update and Security";
Open the "Restore" tab and under the inscription "Special download options" click on the reboot;
The device restarts, and we see the window selection window. After entering the desired menu, do everything as in the previous paragraph when you start the bios on Windows1.

If, when using this or previous method, you did not see the "UEFI" settings button on the screen, it means either the fact that this laptop has an outdated version of the bios without UEFI, or the OS was installed on a laptop in Legacy mode. Then work with UEFI is not available from the operating system - you will have to use the first two methods.

How to enter the BIOS: method 5

The latter method is the most radical, and can only be recommended to those users who already have good experience in disassembling such a device. Otherwise, you are very risking irretrievably damage your laptop Lenovo.

The essence of the method is the following: To reset all the BIOS settings, you must disconnect for some time a special CMOS battery that is connected to the motherboard device. After performing this action, the device will "think" that the settings may be incorrect and will offer you to open the BIOS to correct them, or it will generally log in at all.

Bios batteries look different and in almost every model are each in its place, so you have to dig before getting to it and disable. But in general, the procedure for the action:

Turn off the laptop, pull out the battery;
Get access to the CMOS battery and gently disconnect it from the motherboard;
Wait 15-20 minutes (this is necessary so that the CMOS chip is de-energized and the capacitors on the motherboard were discharged);
Connect the battery back, collect a laptop, connect the power and turn on the device;
If you did everything right, you will see the BIOS settings screen.

We hope that one of the above methods helped you find an answer to the question of how to go to the BIOS on the Lenovo P70 laptop, G50-80, Lenovo ThinkPad T400 or T440.

If you wish to independently perform reinstallation of the operating system or make changes to the work of various components and pre-installed equipment on the Lenovo laptop, the user will first need to get into the BIOS - it is through this menu that adjustments are made to the equipment settings.

The entrance to the mentioned menu on the devices of the popular Chinese manufacturer can be carried out in several ways. After reading the information below, you will learn how to enter the BIOS on Lenovo laptop with each of them.

We try to enter the BIOS using the keyboard

On the old and some new budget models, Lenovo BIOS laptops is started by pressing the corresponding buttons on the keyboard. First, try running the BIOS using the DELETE button. To do this, turn off the laptop, clamp the mentioned button and turn on the device.

If the DEL button did not work, do the same, but this time use the F2 key. If it does not work, try simultaneously press the Fn + F2 buttons and, holding them in the clamping state, turn on the laptop. Bios should open.

If you need to get straight in the loading device menu, use the F12 button or the FN + F12 combination.

We try to enter the BIOS with hardware buttons

If the execution of the above manipulations did not allow you to get into the BIOS, with a large share of the likelihood to enter this menu, you need to use hardware buttons, the location of which can vary depending on the laptop model.

In most cases, the procedure for using buttons data is as follows:
The laptop turns off;
the corresponding button is pressed;
BIOS opens.

If it does not work, try pressing the appropriate key when the laptop is turned on or hold it down and only then try to turn on the laptop.

The hardware input button in the BIOS may be above the keyboard.

Laptop is a very important tool for work and recreation. It allows you to perform complex operations, search for information, watch movies, listen to music, play and much more. Without a laptop, it is impossible to imagine a modern person, it has become an integral symbol of our time. It is also used for recreation, and for work. Almost everyone has such a device, but not everyone can fully use its capabilities.

Advantages of laptops from Lenovo

It is important that the computer has good features and high build quality. In order for the laptop to fully comply with all the requirements of the modern user, it is worth choosing products from Lenovo. Laptops and other accessories from the Chinese manufacturer are famous for their high quality and wide opportunities. In addition, they are reliable and durable. All these properties make the products of the Chinese brand such popular worldwide.

This manufacturer ranks first in the world for the production of computer equipment. Lenovo was founded in 1984. Since then, it has passed long development and modernization, reached the leading position in the global electronics market. Of course, such a breakthrough would be impossible without the obvious advantages of devices from this manufacturer. Computers of this company are famous for the fact that there are many possibilities for little money. Another indisputable plus of Lenovo products is that each buyer is guaranteed full service. You can be sure that any problem has easily solve thanks to the qualified help of Lenovo employees. Being the owner of Lenovo products is one pleasure.

What is a BIOS system

It is extremely important to know all the data on your laptop. It was for this that the BIOS system was created. It gives the operating system absolutely all information about the work of the laptop. The system allows the user to get comprehensive information about various processes and tasks that the Lenovo computer performs, as well as change some settings, for example, the on and off parameters of the device or. Thus, the BIOS is a very important element in computer management. The BIOS makes it possible to diagnose problems and errors in system processes, as well as configure the operation of the device as correct as possible. So, the BIOS on the Lenovo laptop and any other computer is a very important part of the operating system necessary to control and adjust the processes performed by the device.

Ways to go to the BIOS on Lenovo laptop

Many know about the wide opportunities of the BIOS, but not all are aware of how. This question can be very often heard from both newcomers and confident users. Although in fact there is nothing complicated. Already after the first time you can remember and use further.

There are many ways to get into the BIOS on the Lenovo laptop. One of them - using a special button. The magic key that allows you to call the BIOS at any time, called Think Vantage. But it is not necessary to assume that this method is universal - not on all models of laptops from Lenovo, this key is present.

The second way to go to the BIOS is during the power on the computer. At the moment when the device is loaded, you need to click on "Access IBM". This key during the device is turned on is usually located above the main keyboard. Next, you need to select "Start Setup Utility". This will allow the user and get all the necessary information about the device, access to the settings and the ability to adjust various processes.

The entrance to the BIOS can be implemented in another way. It is universal for any computer, regardless of the manufacturer and operating system. The user enters the BIOS window with a simple press of the F2 key. Simply and easily!

Here are 3 ways with which you can go to the BIOS on the computer from the Chinese manufacturer Lenovo. Using them, the user will turn out to be in the BIOS window.

Bios on a laptop is an extremely important system. That is why every user Lenovo should know how to go to BIOS. Moreover, in fact, perform the entrance to the BIOS is not difficult. This allows them to own all the information regarding various types of operation of the device, connections and all that is associated with the processes that the laptop performs.