What to do if the sensor tupits on iPhone. The iPhone does not work the sensor: what to do

& NbsPension IPhone stopped responding to touch, that is, several repairs options:

replace the entire module;

replace the touchscreen (for this you need to disassemble the model).

However, there are cases when repair, as such is not required. Sometimes the sensor stops working as a result of a software failure, or a poor contact of the loop.

Contact may fall after falling, or as a result of poor-quality repairs in the service center. It is impossible to find out the exact cause of the breakdown without disassembling the phone, so in the absence of the necessary skills, it is not necessary to deal with this problem. Is that when you fail to try to eliminate everything yourself to reset the settings to the factory.

Make a reset must first. Very often it allows you to solve the problem with the performance of the sensor and avoid a hike to the service. To reset the device to factory settings, connect it to the computer and reset.

You can make it and without connecting to the computer. To do this, press and hold the power and "home" keys. Hold down the buttons need 10-20 seconds. After that, the device will reboot. Before reset, it is necessary to make a backup of your phone.

If the reset does not help, then you need to start disassembly. For this you need to stock necessary tool, among which a star screwdriver, plastic displacement for disassembling the housing and a suction cup for the display. It is not difficult, look at the video how to disassemble an iPhone.

It is necessary to remove the lid and check how well all the plumes are connected. 3 loops comes from the display module. One responsible for the sensor, the second is image on display and third goes from the "Home" button.

Sometimes after the fall, the loop flies out of its nest, and without good contact, the sensor will not work. You must install the loop before clicking and the good contact must appear.

After checking the plume connection with motherboard Check the performance of the sensor. If everything works, you can safely use the phone, but be prepared for the fact that when you fall, the problem may repeat. If you failed to restore performance, then you need to change the sensor.

The repair of the smartphone is best in the service center. Having the necessary experience, you can repair an iPhone yourself. The easiest option for this is assembly.

& nbsp in this case you need to buy new module The desired color, disassemble the smartphone and replace the damaged module to the new one. With this repair, you can not worry about the further efficiency of the iPhone. Work new model must not worse than a new phone.

& NBSp The most complex repair will be required when replacing only the sensor. In this case, you will have to cross the sensor with a complete disassembly of the module. At the same time, it is very easy to damage the working elements - loops, display and safety glasswhich is easy to break, overlooking the module.

& nbsp in some cases neither replacing the module whole nor its repair nor the firmware of the smartphone does not help, for example, during damage motherboard or image controller.

& nbsp in this case can be repaired the phone only overwhelming the controller or replacing the motherboard. Make this repair is better in the service center.

& nbsppeed how to start work asking the masters to diagnose. Only after it will be understood as a genuine reason for the touch screen problems.

There are cases when iPhone users face a lack of reaction to touch to the screen. A similar situation indicates a failure in the work of the sensor (Tachkrina). Before trying to resume the normal operation of the phone, you should understand why there is a breakdown.

Causes of malfunction

The sensor does not work on the iPhone for such reasons:

In the process of replacing the display module, not all loops were connected correctly;
The phone fell down the screen down, due to which the responsiveness of the screen disappeared;
Temporary hanging OS;
Incorrect installed updates. You may have turned off the phone while installing a new firmware;
Installing incompatible programs;
Work of the virus. Some types of malicious software are able to block the operation of the touchscreen. While the user decides what to do, the virus opens the browser and advertising on third-party resources;
Use non-original part. Fake display modules do not differ high qualityTherefore, breakdown is a completely predictable phenomenon for such elements.

Degree breakdown Tatskrina

In practice, meet different types Sensor malfunction in iPhone. The breakdown can manifest as follows:

Only individual sections of the screen do not work. Here you can say with confidence that the reason is not in the hardware failure. Most likely, operating system Just slows down;
Completely does not respond to touchscreen. Digitizer cannot process touch and transfer it to the motherboard for further mapping;
The sensor stops responding after switching on a specific program;
The phone works fine, but periodically buggy and does not respond to touch;
The device arbitrarily includes programs, presses the keys and opens unfamiliar sites. The reason for such a strange behavior is an autoclicer virus.

Eliminate the problem yourself

The fault is solved the same type, regardless of the device model. To get started try the most simple methods solutions. Restart the phone, the side buttons must work without failure. If the phone is hung, it will definitely help.

In the extreme case you can roll back latest updates Or reset the phone to the original parameters (remember that all files and programs will be deleted, so it is better to first connect non-working device to a computer and make backup). Scan the device with antivirus. Remove the trojans found. If the sensor is still independently "pressed", you should delete all browser data.

Is Zillow installed on your phone? This application It turns out incorrectly with 5 and 6 generation of iPhones. IN background mode The utility can perform an erroneous code, which leads to braking. To troubleshoot the fault, simply remove the Zillow from the device.

If none of the above methods approached you, the problem is incorrectly connected module. Perhaps the loops were fragile, which fasten the screen to the back cover.

Note! Very often, while turning off the touchscreen loop (shown in the figure below), users hide the chase one of the filters, which leads to its breakdown.

The filter is located at the bottom of the motherboard. The plug that hides it needs to be easily disconnected by tweezers:

Most likely the filter broke off. Details name - FL34. The marking is indicated by small font on the device itself. So you do not get confused in all small details. All you need is to ring the adjacent filter (FL35). If the 35th element is nicknamed, then the 34th filter can be easily replaced with a jumper.

Any instructions for independent repair iPhone. You can find on our website, or make a specialist call for At any place convenient for you.

If your sensor stops working, the causes of various. But most likely, the update to iOS 11/12 causes. In addition, the program failure, the overheating of the iPhone, the contamination of the display, also lead in various breakdowns. The following situations are listed:

The sensor stops working after a while
The sensor stops working after locking the screen
The sensor stops working after 10 seconds
The sensor does not work on the phone after falling
The sensor does not work on the phone after water
The bean stops working on the cold

And when the above appearance arises, it should be fixed. If after falling and water, the screen does not react or divided, then it is necessary in service center Note to a new sensor, and pre-extract data on the device from iTunes and ICloud backup, avoiding file loss. In other cases, the system failure or breakage is recommended, the Tenorshare Reiboot program is recommended, allow free to fix that touch screen Does not respond to touch.

What to do if the sensor does not react to touch

Free app Tenorshare Reiboot is a professional utility, capable of entering and exit the recovery mode. And the input and output from the recovery mode can eliminate the majority of freezes.

1. Download and install Tenorshare Reiboot, connect the iPhone, iPad and iPod to the computer.

2. Click "Log in to recovery mode", And enter the device into recovery mode,

3. Click "Exit Restore Mode", and display a device from the recovery mode.

In addition, Tenorshare Reiboot can fix problems with iOS 11, for example, freezes on an apple, cyclically reboots, freezes when firmware updates, it hangs in headphones mode, black screen on iPhone but it works, the battery is discharged strongly. If iPhone is disabled Connect to iTunes, you can reset the lock password using Tenorshare Reiboot.

How to restart the phone if the sensor does not work

the iRhone 5s stopped working sensor, and then the screen will become black, in which case, how to reboot an iPhone? Simple I. fast way - Forcibly to recover. Press and hold the power button at the same time and the volume button located on the left for 15-20 seconds, after which the Apple logo appears on the screen.

How to reanimate the sensor on the phone

1. Start the Tenorshare Reiboot, after connecting the gadget to the computer, click "Fix Now".

3. After downloading, start restoring, and wait a bit, the recovery is successful.

If you failed to restore the iOS system, then change the download path, and try again. If still the sensor reacts poorly to touch, then contact the service center. The reason may be that the hardware happened unpleasant.

Apple products are known for their quality all over the world. However, despite the excellent assembly and high-quality components, all models iPhone. Have their weaknesses. Gadget owners often complain that touchscreen does not work in their iPhone. From this article you will learn why this happens and what you need to do if the sensor does not work on the iPhone.

How problems with the iPhone sensor are manifested:

Fully absent is the response of the touchscreen iPhone on touch;
There is no response of the sensor in some dispensation zones;
The sensor response to the command occurs with the delay;
The touchscreen of the smartphone reacts not to all user commands;
The iPhone sensor arbitrarily triggers - the device itself opens-closes applications or documents, dials text without user participation, etc.

Why does not the sensor work on iPhone?

The reasons because of which the sensor does not work on the iPhone quite a lot. Touchscreen iPhone can stop working as a result of the factory defect touch display, drops from a height or impact. However, in addition to damage to the display module, a common cause, which stopped working, the iRhone sensor is a motherboard fault. Hanging the device's fee can be like a blow or drop on a solid surface and moisture inwards inside the smartphone housing, which will lead to corrosion of conductive chip elements.

But most often the failures in the operation of the touchscreen, regardless of the iPhone model, caused mechanical damage Due to non-compliance with the owner of a smartphone of elementary rules of operation and banal neacketer. This leads to the fact that as a result of falls, chips that are responsible for the work of the Sensor Iphone are damaged and the touchscreen begins to work with interruptions. In order to find out the exact reason why the sensor does not work on the iRhone need a consultation of a specialist and diagnostics of a smartphone. If the problem with the device sensor is not in the display module, then repair is needed system board Iphone Specialists of the "X-REPAIR" service center promptly repair your iPhone by best price in Moscow.

What if the touchscreen does not work on the iPhone?

If the sensor stopped working on your iipone, you do not need to panic, use our advice:

If a protective film is pasted on the display of your iPhone (glass), remove it and wipe the screen with a napkin. Perhaps the reason for incorrect operation of the touchscreen in the not careful pasted protective film (glass) or in the contact of air bubbles, small sarations or dust.

Restart the smartphone while closing hOME buttons and POWER for 15-20 seconds.

If the tips described above did not help and the iPhone sensor never started working normally, consult professional. Experienced Masters of the "X-REPAIR" service center will conduct free diagnostics of the gadget to determine the causes of the breakdown by which the sensor does not work in the iPhone. If the problems with the smartphone touchscreen are not in the display module, the repair of the iPhone motherboard is required, which in the X-REPAIR SC will make at the best price in Moscow.

Repair of the defective iPhone sensor in the X-REPAIR service center in Moscow

Did you remove the protective film and reboot the device, but the sensor on the iRhon still does not work? Without the help of experts, do not do here. If the smartphone's display module is intact and correct, the reason for the breakdown of the sensor of your device is damage to the motherboard. Certified employees of the X-REPAIR service center quickly and efficiently repaired an iPhone at the best price in Moscow. The branches of our network are conveniently located within walking distance from the metro stations (

Touchscreen is called a touch screen, by touching which the iPhone is controlled. Apple products boast a reliable and sensitive sensor, but even with time or due to careless circulation may fail.

Causes of Touchscreen breakdown

Problems in the work of the touchscreen, regardless of the model, may be caused:

with a blow or fall;
corrosion or closure due to moisture ingress;
fault controller;
failure of the touchscreen chip;
gap contacts of the motherboard;
preceded repair using non-original parts.

What does the touchscreen fault indicate?

The following signs are talking about the need to repair the sensor:

slow response to touch;
the display is buggy when pressed;
the sensor completely ignores the touch;
the display is accomplished spontaneously, without touch;
pages switches hard;
on the screen there are areas where the sensor does not work.

How to solve the sensor problems yourself?

Before resorting to the help of masters, you can try to cope with your own (especially if the touchscreen is buggy for the first time, and other malfunctions for the device is not observed). To do this, follow these actions:

Hold the power button and "home".
Wait 20 seconds before rebooting the phone.
Test the Sensor's work again.

Also remember whether you did not acquire new accessories for the phone: protective glass, cover, bumper or magnetic keychain. Check the operation of the touchscreen by removing them.

Touchscreen repair features on iPhone

If all simple causes of malfunction are excluded, then the problem of the non-working sensor should contact a specialized service center. Master will spend professional diagnosis, after which it will be decided to repair or replace component parts.

If the fault lies in one of the parts of the display module or the loop, then change the entire part completely (the individual replacement of the sensor or contacts is not made due to the unreliability of such a procedure).

Even if most of the time, the TouchScreen iPhone functions properly, periodic failures in work explicitly indicate the need to repair. Do not tighten Total Apple to our service center so that your favorite iPhone does not let you down at the most inopportune moment.