How to glim the protective glass. How to stick protective glass to phone: instructions and tips

To maximize your gadget from damage, you need to know how to stick safety glass. This can be done independently, since nothing is difficult in this process.

Necessary materials and tools

Externally, protective glass on a smartphone or telephone resembles a conventional film from the polymer material. Externally, it is subtle and flexible, but specially tempered in order to resist shocks and scratches. No traces from damage with a knife, scissors, keys left.

Even if the blow will be so strong that glass will suffer, it will not split into small and dangerous fragments, but will remain in the broken, but single state.

It is clear that such protection is thicker than the film, since it consists of five components: oleophobic coating, protective, anti-reflective and deterrent layers, as well as silicone substrate. This allows you to protect the screen from scratches, does not allow the formation of divorces. The gadget becomes more voluminous and heavy that absolutely does not affect the operation of the sensor.

Required tools:

Actually the glass itself.
Special spatula for smoothing or ordinary plastic card.
Napkin for cleaning. It can be replaced with a cotton disk dipped in alcohol.
Roying from microfiber.

Sometimes there may be necessary scissors and stationery tape. As a rule, in the purchase set there are all the necessary materials in order to stick the glass without any problems alone.

Step-by-step instruction, how to stick a protective glass

The main thing is to choose the right protection for the display of a certain gadget. Each protective screen is not universal, as it is produced for a specific model. Of course, you can simply turn to those skilled in the art, to buy a suitable glass and ask for it (for an additional fee, of course). But there is an option to do it all with your own hands.

For phone

Stick the protective glass on the phone is easy. The main thing is that it lay exactly and completely coincided with the borders of the screen.

How to do it:

Remove the room, wash your hands. The room should be light enough to see even the slightest dust deposits on the glass.
Prepare the necessary tools.
Degrease the screen with antistatic or alcohol. Then wipe dry.
Hands disinfect, take the glass (only for the edges, so that the fingerprints do not remain), remove the film.
Align it with a slight movement to the screen. It immediately fixes due to the special adhesive coating.

If dusting suddenly got under the glass, not scary. You need to carefully lift it and remove the dust with a piece of scotch.

On smartphone

Sequencing:

Wash your hands to randomly do not apply dirt on the screen.
Remove the cover. Remove the old coating if it is.
Put the gadget on the table and wipe the screen with a special napkin.
Remove the protective film from the glass and attach it to the screen, keeping on both sides. At the same time, the edges of the protection must accurately coincide, and the cuts are combined with a speaker or buttons.
Gently lower it on the screen and lighter movements to fix, having spent the finger down in the center.

If suddenly, during work, dust got dust, it must be removed by a scotch or a dust collector, and the whole process is repeated first.

On the tablet

In the case of a tablet, the procedure looks almost the same. Only you need to be more attentive, since the device has large sizes, therefore it is difficult to calculate the perfect glass installation as accurately as possible.

For this, there are following tricks:

Locate the device on a clean surface. It is said that it is best to do this in the kitchen or bathroom, as there because of the high moisture content in the air there is little dust, which can settle on the already prepared and refined screen.
Applied protective glass with a safety film to the screen.
Check the match all holes.
Take a segment of the tape and glue one part of it on the glass (in the center), and the second - to the rear panel.
Make sure that the glass is exactly adjacent. Contact if necessary.
Glit tape with the right and left side. Roughly speaking, it should be like a book with anterior cover in the form of glass, and from the back - in the form of a tablet.
After all the preparations, clean the screen, remove the safety film from the substrate and glue the glass. Scotch will help do it without any special difficulty, as everything is already designed in advance.

Many people in the process of use can pick up the phone, wear it in their bag, where in addition to the phone also lie sharp objects - for example, keys.

Therefore, it is not surprising that after a few months of operation, scratches appear on the surface, and in some cases - chips and cracks.

However, using modern technologies, It is possible to achieve the extension of the life of the device. An excellent solution is the acquisition and stick of protective glass.

Visually, she strongly resembles a film designed to solve similar tasks.

But such glass is completely transparent and flexible, and due to increased density it is considered more durable and reliable.

The cost of the protective screen for the phone is an order of magnitude higher than the film, but additionally spent the means quite justify the declared price.

If it is presence, the probability of the screen will suffer from damage, it is actually zero.

Why need protective glass

Read also: No moisture and dust: Top 20 protected IP68 smartphones

Before sticking the protective glass to the smartphone, let's first get acquainted with its main features.

The main advantages are as follows:

increased resistance to scratches and damage. It is easy to check it enough - you can easily rub the surface with scissors or knife. The facial covering will not receive any trace;
absorption of impact energy. Even if the phone drops down the display, its facial part will not be damaged. Only cracks on the protective glass will remain on the surface. The structure of the material from which it is manufactured, prevents the appearance of fragments;
reliable fixation. Compared to sticking film, protective glass is easy to glue at home even if the owner has no appropriate experience. Special adhesive composition guarantees solid fixation on the front of the screen. Thus, get rid of the protective glass will not be easy, which you can not say about the ordinary film, which can be constructed even with a smartphone cover.

The use of protect glass is also characterized by a number of shortcomings:

the device will become heavy and voluminous;
the cost of protective glass is an order of magnitude higher compared to the film;
in the process of installing the installation requires limit accuracy.

The average displays thickness varies from 0.2 to 0.3 mm. Products have 5 base layers:

oleophobic coating . It is responsible for the convenient slip of the user's fingers along the display, and when the fingerprint traces appear, they can be erased using a conventional cloth. In addition, the problem of the oleophobic coating lies in comprehensive protection against moisture penetration;
protective covering . Its purpose is to maintain the integrity of the screen and preventing the appearance of cracks / scratches;
anti-reflective coating . Another important layer that prevents the appearance of dull tracks on the display when using the phone in the sun;
stretching . If the situation occurs when the user still was able to break the display, the restraining layer will prevent the appearance of fragments;
silicone layer . Fixed on the display surface.

How to glue the glass on the iPhone

Read also:Top 11 Best Chinese Smartphones | Current rating of 2019

If you want to get acquainted with the correct sequence of action when sticking the protective glass on the iPhone 6 and 7 series, it is necessary to remember that almost all devices the work algorithm is the same.

Depending on the name of the glass producer, the package in the box can differ significantly. As a rule, it is not only glass, but also a microfiber cloth.

In some cases there is an alcohol napkin. If, for example, those or other materials are not available, you can use alternative impact facilities.

So how to properly stick the protective glass on your smartphone? The instruction is as follows.

1 If an old film or glass is already present on your phone, you must first get rid of the coating.

To do this, first remove the case, and then picker the coating for the edge.

Before performing the procedure, you will definitely clean your hands so that in the process of execution of work, do not leave on the surface of the glass of fatty fingers.

If you still put them and stick the protective glass on your smartphone, every time you will see traces when using the phone.

2 Prepare your workplace in advance.

In his capacity can be any smooth surface - table, stool and so on.

To prevent the appearance of dust and divorces in the process of gluing the protective surface, we strongly recommend turning on the bright light in the room.

3 The next step is the screen preparation. Using cotton discs or alcoholic napkin, thoroughly wipe the display surface.

After that, take a rag from the microfiber and follow the screen so that on its surface there are no traces of alcohol, dirt, stains and so on.

Check for defects very simple - just closer phone screen to the light source and check the cleaning of the coating.

If for one reason or another you can not completely get rid of dust, you should try to collect them using an ordinary scotch.

Attach it to the screen with a sticky side and pull sharply.

Pay attention to what it is necessary to do it quickly, because with slow dumping the tape on the surface of the display there may be traces of glue.

As soon as the scotch is removed, wipe the display again with a dry cloth.

4 Each copy of the protective glass includes two films.

First, get rid of the bottom film with the adhesive side.

Offer a protective coating to your display.

Please note that you can hold it only for the edges. Otherwise, traces will remain on the surface.

Align and accurately stick the glass across all edges. Be sure to keep it under the speaker and the Home button.

Then slowly release the glass - it will begin to glit on their own.

Practice shows that not every person can perfectly glue the new protective glass from the first time, since air bubbles can remain under it.

In this case, you can get rid of them by means of a dry cloth. It is enough to press it on the display towards the edges.

After that, the air falls out.

If the dust was under the glass, it should be bent from the necessary part and get rid of Skovell dust. Then press the protective glass to the display of your smartphone.

Now, having read the proper instruction on sticking the protective glass on the iPhone 5, 6 and 7 series, you will get the opportunity to further save on the services service Center And independently provide comprehensive screen protection.

We suggest watching video instructions from specialists who tell in detail how to perform all the actions.

How to stick a protective glass on the iPhone screen

How to get a protective glass on your smartphone with home? Instructions for ordinary and 3D glass

Glue glass with 3D rounding

Read also: Top 10 best budget smartphones with an optimal value for money up to 15,000 rubles. | Review of current models in 2019

If you recently acquired a new iPhone, we strongly recommend protecting it from screen damage, including chips, scratches, and so on.

It's easy enough to do it. We offer you an overview of a special protective glass with a 3D rounding.

This product is designed to provide comprehensive screen surface protection against damage resulting from a strong impact or touch of acute items.

The thickness of the layer on average is only 0.23 millimeters, but thanks to the use of the polymer structure, the smartphone can easily cope with severe blows.

During production, materials are used, capable of creating a special barrier, which quickly cracks, absorbing the energy of the strike, but it guarantees high-quality screen protection as a whole.

Compared to conventional glass, 3D-rounded products ensures the following advantages:

The presence of soft edges. Manufacturers use special PET materials in the manufacture of edges of the protective surface. This allows you to achieve high-quality and reliable fixation, and the edges will not crumble and crack. This is not only a convenient, but also a safe decision, since the soft edges will not be able to scratch the hand of the owner when one, for example, pulls out the phone from the pocket;
The effect of 3D rounding. If, in the case of conventional glass, only the direct part of the display is closed, the glass blowing with 3D rounding ensures comprehensive protection of the entire device display. Thus, the extreme curved surfaces will be securely protected;
Increased level of hardness. Despite the small thickness, the production material has a hardness of 9H. To date, this is one of the few models that fully correspond to this indicator;
Minimal thickness. Using the usual Chinese glass, the phone is more difficult to use. Brand products always have a thickness of a little less than a quarter of a millimeter, but it is enough for the device to get high-quality and solid protection for a long period of time.

Technical progress does not stand still: phones that used to only call, today we combine a huge number of functions in themselves, without which we no longer have our lives. To our favorites, there are a huge variety of accessories: covers, protective glasses and films, plugs on the headphone slot, suspension - not to list. Something from this is only an ornament, something - the need. The latter includes protective glass on the phone. How to glue and what functions do it perform? And is it really necessary?

Why do you need?

Before you understand how to properly glue the protective glass on the phone, it is worth understanding why it is generally necessary. According to its functions, the glass is the same as the film, but the latter can protect the screen only from scratches, in the event of a fall, the likelihood of a happy outcome is very small. Those windows that are available on a wide sale are hardened, so if the phone will threaten the danger to beat broken, the whole blow will take on it.

It can crack, separate pieces can be broken, but otherwise everything will be fine - replace it much cheaper than the entire display. There is another type of protection available so far only in China - liquid glass. It is applied to the screen as ordinary varnish, and after drying, according to the manufacturers, it will be able to protect the screen and from the fall of water. In fact, such a coating increases the sensitivity of the sensor, and also visually increases the brightness of the display, but the protective functions does not perform perfectly. This type of protection is not noticeable on the display. That is why more and more people today are wondering how to glue protective glass on the phone, iPhone or device any other firm to save money on repair.

Where to glue?

So how to glue a protective glass on the screen of the phone? First, it is better not to improvise, but follow the instructions that are placed on the package. In addition, often in places of sale of such accessories, sticking is offered as an additional service (for a certain fee most often). If you decide that it is too simple, then proceed to self-sticking.

Necessary equipment

So, we have a protective glass on the phone. How to glue it yourself? First, you need to stock all necessary for this simple operation. Included with glass necessarily eat wet and dry napkins - one degreases the surface, and the other removes dust and fine garbage from it.

Even for removal of dust, a tape or adhesive tape will need, they will also be pre-fixed glass, configuring it for a specific smartphone (most often the windows are universal, so it will be necessary to correctly arrange it on the display, taking into account the characteristics of a particular model).

Display preparation

How to glue protective glass on Samsung's phone, iPhone, Lenovo and others? Before you start, wash your hands with soap - it will help get rid of surplus fat. In addition, it is necessary to clean the workspace.

Next degreases the display (for this you need to use one of the napkins from the kit, if they are not, it is enough to moisten a cotton disk with alcohol or spirits) - it is necessary to wipe it very carefully without leaving a single divorce. Surplus alcohol is removed by a dry napkin, the dust linakes are brown with it (the most persistent will have to remove the scotch, just pressing it to the dusty place) and the remaining stains are wiped.

And gluing

So we prepared the display. And the protective glass on the phone how to glue? First, it is if it is dirty, wipes the same way as the display. After that, you must, holding a glass for the edges so that it does not bother again, remove the film from it closing the adhesive layer.

Holding the glass as close to the screen, you should find the optimal position for it (you need to align on the main button and dynamics), while you can help yourself with narrow scotch strips, which can be pasted along the supposed glass boundary. After the correct position is chosen, the glass is pressed to the display.

Elimination of defects

So, we figured out how to glue the protective glass on the Lenovo phone or any other smartphone. But what if the air bubble turned out to be under it? In this case, you need to close a cloth to the glass and spend it up and down, as if squeezing excess air. As for dust, which can also be clogged under it, sufficiently flat (for example, a credit card) pick up the edge of the glass, and then carefully remove it.

If you shoot too quickly and without much caution, then you can damage plastic, as well as the adhesive layer, that is, in any case, you will have to buy a new one. After removing it and holding the adhesive side down (if the glass is turned over, then the dust and sorts are instantly put on the glue, and it is not easy to clean it - it is not easy), you need to wipe the display from the garbage that has fallen (it is possible and with the help of a scotch, small pieces of which will be easily removed dust), After that, following all instructions, glass is glued again.

Do not hold!

But what if you bought a protective glass on the phone, how do you know it, does it still do not hold on the screen? In this case, there are two options for such a "incontestation" of the accessory: either the protection and / or the display were poorly prepared (it is clear that in this case you have to repeat the entire operation, which is clearly following the instructions), or the glass is not suitable for a specific smartphone model and is not glued Due to the fact that its edges hide the speakers of the phone (the same start button).

In any case, if for some reason it is not glued immediately or dugs, it is necessary, starting all over first, to repeat the attempt, and then, in case of failure, if there is an opportunity, consult with a specialist who may indicate errors if they there is.

Conclusion

So, the protective glass is not just an alternative to the film. It will not allow the display to break down when falling even from the height of human growth - the protection itself can crack, but the main thing is that the smartphone will not suffer. Special tests were carried out, which showed that the protective glass will not endure exset with a straight strike with a hammer - but after all, a clash with such force is very unlikely in real life. The replacement of the entire display (and most often it is replaced by it, since it is usually impossible to disconnect the glass and the sensor itself) will cost almost half the cost of the phone, while the protective glass is rapidly cheaper, and it can be replaced independently, without overpaying specialists. Therefore, to avoid chagrins, use this type of protection that your smartphone will save and your nerves.

Protection for your favorite gadget is one of the most important and complex tasks. Pick up the defense is difficult because of the abundance of proposals possessing various characteristics and secure protection. Among the options for improving the security of phones, such a product is distinguished as a protective glass, which eliminates most of the negative effects of impacts, scratches or friction. Moreover, paste the protective glass on the phone yourself, without having skills and special tools.

Determining the positive factors for choosing glass on the phone will spend in the form of a comparison with the same film. In this case, positive parties will be distinguished:

Strams resistance. Even overlooking the gadget with a display down, with a lot of probability, the touchscreen will remain as integer, and only the protective glass will be damaged on the smartphone if it is glued correctly. Manufacturers argue that some models can even withstand even shocks with a hammer. However, such experiments are not recommended.
Scratch resistance. Wear a smartphone with keys if protection provides a film, which means, get damage, chips and scratches. If you use high-quality protective glass on the gadget - a similar problem is excluded with a 99% probability. However, the same keys can leave scratches on the device's case or damage its other parts.
Duration of protection. If you stick the tempered glass at home and comply with the recommendations, you can create effective protection for many years. Such screens are not dug independently, as well as retain transparency, color reproduction and tactile sensitivity of the sensor.
Ease of installation. An adhesive composition is applied to one side of the protective screen, which provides a dense fit and turns the design into a monolith. Moreover, the sticker of the protective glass to the phone will not leave the divorces, traces of glue or other negative factors that would reduce the visual display of information or the quality of the transmitted colors. This is achieved due to the unique composition of the glue on the surface of the glass.

Even S. reliable protection It is necessary to follow your smartphone. From how you handle the device and carefully store it, its durability and functionality depends. Remember that the protective screen for the phone is an additional protection, not a panacea from any surprises and dangers.

Even such a reliable method for ensuring safety, smartphones have several flaws. Of course, the disadvantages will not be so significant in comparison with the advantages, but they will be important to some users:

Cost. In comparison, everything with the same film the price per glass on the phone screen will be an order of magnitude higher. If you have decided to entrust the sticker of professionals - be prepared for another cost of expenses.
Increase size. Let and slightly, but your smartphone will become more massive. Yes, the thickness of the protective glass does not reach the millimeter, but it even the thinnest phone will make a little thicker.
Accuracy and complexity with fastening. For some users correctly glue a protective glass - this is a significant problem. Even one incorrect movement will spoil expensive protection without ensuring the safety of the smartphone.

Thus, is it worth glue protective glass on the screen - to solve the owner, given the features and conditions of operation. The main thing is that numerous reviews and instructions on the sticker say are really done even at home, and the degree of security for the phone will be really at a high level.

You can independently leave comments at the end of the article, indicating not only examples from your own experience, but also asking questions to which you get an exhaustive answer. Remember that a couple of lines or repost in social. networks will help you solve problems not unsociable information, but by facts real peopleAlready tested similar products.

How to glue protective glass on phone: detailed instructions

Before gluing the glass on the phone, you will need to perform a row. preparatory events. Actions to secure protection are divided into five stages.

Prepare the room

The preparation of the premises will be delivered from dust, garbage and even moisture. In this case, we are talking about wet cleaning in the room itself and carefully wiping the table. And also do not forget to wash your hands and wipe them with a towel. The smallest hair, dusting or bold sweat drip can lead to the deterioration of the aesthetic qualities of the device.

Prepare tools

In order to stick a protective glass on Xiaomi or any other smartphone will need two types of napkins, scraper (can be replaced plastic card), tape, scissors and directly selected protective glass. All these details should be at hand, but do not interfere with the priority of actions.

First, carefully examine all the points of the instruction, and only then proceed to work. The second attempt is not provided, and from the first time it can be independently installing protection, only scrupulously examining the instructions.

Decrease the surface of the screen

The action will require a special napkin with alcohol impregnation, which will allow not only to remove fat stains, but also completely clean the display from dust and garbage. If the set with protection was not provided with such napkins - use conventional, wet with alcohol impregnation. It is not necessary to buy them in a specialized store, spending extra money. Just get the napkins and in household goods. After that, use microfiber wipes, on which the cleaning will be completed.

Stick glass

Try to glue the protective glass on the iPhone as accurately as possible. Remove protective film And keep the glass directly above the device. All edges must match, and the holes exactly match the button and dynamics. In order to stick the glass on the iPhone, you do not need to spin it or express it - easy clicking on the screen center will be enough. Immediately check that the sticker passes without bubbles and the steps between the glass and the veins display.

Remove the missed dust

It should be removed, gently lifting the edge of the glass with a scraper or a plastic card. And correctly stick without bubbles and Village - it means to make it completely imperceptible. If it really happened to spend such a procedure from the first time - raising the glass from the edge, remove the dust or hairs with scotch, sharply jerks it.

Do not use color tape or paper ribbon options with glue - they can leave a divorce and worsen the display of information. The glued film or glass, with accurate observance of all actions, should not worsen visibility. If you managed to stick a protective glass on Xiaomi, but bubbles were formed - remove them with a napkin with a microfiber cloth. Light pressure and movement of bubbles to the nearest edge of the display will allow you to quickly achieve the desired result.

Features Stickers on some phone models

The main feature of each individual product will be its size and the presence of holes for the function keys. As an example, it can be relevant to study the features that protect glass on iPhone, for example, such a product like Zool iPhone 5 0.1mm 9H.

Such glassware is inherent in such features such as accurate compliance with the size of the smartphone, the presence of a special coating for a comfortable device control and elevated protective properties in a set with an ultra-thin design. However, as with other products - remove the protective glass and install in place the second time it is hardly possible.

Remember that you glue the protective glass on the iPhone to enhance safety, not aesthetic or functionality. Carefully compare all edges and holes before applying the screen to the device.

Stopping on a similar security type, you should know that all glasses are hardened, but are endowed with various properties. Two types are allocated protective screens - with glossy and matte coating.

In the first case, scratch protection will be minimal, as the screen itself can easily get small damage. Such a type of glasses is glued as an effective counteraction to falls and shocks, preventing damage to the touchscreen.

Matte protective glass on the iPhone or other types of gadgets will have a higher degree of protection, up to the anti-reflective coating. Negative side such a purchase will be high priceEspecially if you get the product of the famous brand.

Choosing protection, focus on the package you need properties and reviews of other consumers. You can independently leave a comment at the bottom that will help other users of the site make a faithful choice based on personal experience.

Finally

Protective glass is an opportunity to increase the security and safety of your smartphone. You set the protection that cannot be quickly changed, as the same case or drop your gadget constantly, without worrying about shuffles and possible scratches.

Durable and reliable glass should be pasted correctly and as accurately as possible. Subsequently glue the protective glass to the phone if it was dug - unrealistic. The adhesive composition, which is used in similar products, cannot be replaced with a superclaim, you will only spoil the display. If the protective glass is sprinkled on the phone - it is better to remove it in order to avoid damage or getting between the screen and the garbage display, which can damage the touchscreen.

We will be grateful if you finish our article by your own experience with specific models phones. Protect your smartphone, and it will answer you unchanged functionality and help in any situation.

For those who are easier to clearly examine the information on video - see an example of protective glass stickers using small scotch strips to accuracy. This method will also be relevant, but not suitable for all phone models.

Want to protect your phone from damage as much as possible? Then it is worth thinking about buying and pasted protective glass! About how to stick a protective glass yourself, we will tell you you this article!

Why protect glass?

Despite the fact that many manufacturers install special Corning Gorilla Glass glasses on phones, which in the idea should protect the display from scratching and cracking during a random drop, as practice shows they protect slightly and better supply protective glass.

Protective film or glass

Protective film and protective glass is not the same thing! The glass is much more densely film, does not worsen the "clickable" of the screen and color reproduction, it saves the display while dropping the phone from a height, can improve the quality image on the bright sun, thanks to anti-reflective coating. Therefore, when it is the question of what to choose, film or glass, it is better to give its preference, of course, a protective glass.

By the way, it is worth noting that the protective glass is glued much easier than the film!

How to stick a protective glass perfectly?

If you are going to shove the protective glass on your smartphone yourself, especially for the first time, then you need to do the best in a pre-steamed bath, it is necessary in order to donkey all dust, or in a well-cleaned room, having previously closed all the windows, turning off the fans and air conditioning .

1 Open the packaging and remove all the contents, you should be on the table - protective film, wet napkin (number 1), dry napkin, adhesive film or tape, stickers.

2 Thoroughly wipe the display of the phone with a wet napkin to remove fat deposits, and then dry, after which the adhesive film passes through the screen to finally remove the dust.

3 Take a protective glass in the hands and define it low partWhat will stick on the phone display and the top you will press. The bottom is marked with a number 1, and the upper digit 2.

4 bring the protective glass and gently open the lower protective film (1),
After that slowly centering the glass to apply it to the phone display.

5 smooth movements, preferably a dry napkin, scroll the glass from the center of the edges of the display and after carefully press it over all the screen bases. You must do everything quickly, so as not to get dust and from the first time, otherwise the adhesive layer will keep worse if it is the second attempt.

6 When the protective glass is pasted on the phone display, carefully remove the upper protective film (2). Hooray! You managed to stick a protective glass on your smartphone!

See also the video version of how correctly and perfectly paste the protective glass on the phone.

Did you still have additional questions? Write them in the comments, about what you happened or vice versa!