Asrock how to find out the model of the motherboard. Determining the motherboard model on the computer

- today we will look at how to find out the model of the motherboard on the computer. Updating drivers, checking hardware compatibility and purely out of curiosity - ... using the methods given in the note to check the model of the motherboard is much easier than disassembling the computer and examining the stickers inside the system unit.

You can simulate a lot of situations in which it is very important to know the model of the motherboard: a banal driver update, the purchase of new hardware (find out what can be added to the system and whether there are necessary slots for this, for example, to expand the RAM) ...

If you have preserved the documents that are issued along with the computer (or separate positions for components, if you selected the components yourself), you can find out the answers to your question there. Probably it even The best way, because you can check the compliance of the real situation with what is indicated in your docks.

In principle, I will not tell you how to find out the name of the motherboard by opening the system unit - in a modern situation this is absolutely unnecessary, because software methods will give information more than just a visual inspection of the motherboard.

Of course, I do not deny that you can recognize the model by looking at the board itself (I am not so stubborn as to say that this should not be done in any case), and an advanced user probably knows himself where and what to see ... well, I recommend to us to use the simplest and most correct methods

Method 1. Find out the name of the motherboard through the command line

If you enjoy using the command Windows string then you can easily find out your motherboard model using Microsoft's powerful WMIC tool.

With WMIC we can run a baseboard request to check motherboard and several additional parameters such as serial number, revision and other detailed information about your motherboard. Let's try with you on an example to find out the manufacturer of our motherboard, model and serial using WMIC.

The program is in English, but for us this will not be a problem, we are specifically interested in the Motherboard line - this is the name of our motherboard.

Despite such a small size (less than 1 megabyte in the archive) the program can tell a lot about your computer, but I would not recommend using it ... find out what kind of motherboard is on the computer - it is great, for everything else there are more convenient analogs.

Method 3. AIDA64 - find out the model of the motherboard

There are several editions of AIDA64, the Extreme Edition version is perfect for us (the application costs money, but the 30 day trial version, indicated on the download page as TRIAL)

After installing AIDA64, launch the program and find the "System Board" icon on the left side. In the window that opens, the second line "Motherboard" will display the manufacturer and model of the motherboard. As you can see in my computer the motherboard name is Asus P8H67.

If you scroll down to the bottom of the window, you will find a link to the download page for the latest BIOS ("Download BIOS updates" line). This can be useful if the purpose of determining the motherboard is the firmware new version BIOS firmware

Method 4. Piriform Speccy - a good program from the developers of Ccleaner

If you have ever used by the Ccleaner program and she left you only positive emotions with her result, then a small one will answer the question of how to find out the motherboard model Speccy program from the developers of the same Cclener (Piriform). Download as always on the official website:

Run the application and on the left side, go to the "Motherboard" tab. On the right side, in the "Model" line, there will be an answer to our question - in our case it is P8H67 (LGA1155) ...

Not only did the program correctly identify the name of the motherboard installed in the computer, but also showed its socket (1155) and a lot of useful information (such as voltage, BIOS version and system temperature)

Method 5. CPU-Z - will tell not only about the processor

CPU-Z is a very popular utility for identifying a processor, but it is perfect for identifying the motherboard model on a computer. The program is absolutely free and does not require installation, just download the current version from the official website

After starting the utility, go to the "Mainboard" tab and the name of the installed motherboard will appear in the "Model" line. I have a P8H67 motherboard on my computer (so far testimony all applications are the same)

For many, the BIOS block will be useful, the version and manufacturer of the firmware are displayed here ...

Method 6. HWiNFO32 - detailed information about the motherboard

To download the program, go to the official website (there are several versions of the program - HWiNFO32 for 32 bit systems and HWiNFO for 64 bit systems). In my case, I downloaded HWiNFO64.

After installing the appropriate version of HWiNFO, launch it (it may take a long time to launch, collecting information about the components of your computer). The program will automatically display the "System Summary" screen, where the motherboard model will be shown in the "Motherboard" section

By the way, please note that HWiNFO correctly detected the video card ... it should be added to the note about video cards

Method 7. Sisoftware Sandra is an underrated program

When I was looking for information on how to view the motherboard on a computer, I have never come across an application such as Sandra Lite in reviews (this is what we will use, since specifically Lite- distributed free of charge). As usual, you can download it on the official website, avoid left-wing sources ...

After installing Sisoftware Sandra Lite, launch the program and go to the "Devices" tab. In the window that appears, double-click on the "Motherboard" icon and wait until the utility collects all the necessary information. A new window will open detailed information about your motherboard, in the "Model" line and the question will be answered how to find out the model of the motherboard?

This section displays not only the name of your motherboard, here you will find a lot of other useful information about your motherboard. For example, you can find out how much memory and how many total slots for it ... or the model of the chipset on which your system is built

BONUS! Motherboard information in HTML report

This application is called LookInMyPC and you can download it from the developers website (in English, there is portable version does not require installation)

http://www.lookinmypc.com/download.htm

After starting, you can choose what exactly to generate the report about, but we leave everything as it is and click the "Generate Report" button ... you just have to wait for the report to be generated - it's fast.

The file with the report will open in any browser, in the "BIOS Information" block in the "Board Product ID" line, and there will be the name of our motherboard.

In fact, the report contains a lot of interesting and useful information, but as for of English language — Google chrome perfectly translates everything.

The report generates a lot of data about the software part, and you can view it at any time without the program itself - this is very convenient

What have we learned about the motherboard? - Conclusions

Friends, we have considered several ways to find out the model of the motherboard. As you understood from the note, it is quite possible to do this without disassembling system unit- there are more civilized methods.

What to do with this information? - even if you need to visually look at your motherboard, it is quite possible to find its image and specifications on the official website by the model name.

Sometimes, in order to download drivers, look at the socket type, find out the maximum allowable size random access memory, which can be installed in the computer, you need to find out the manufacturer and model of the motherboard. This can be done in several ways.

Description of the elements of the computer motherboard

Method number 1 - Open the lid of the system unit and look at the board

This is the easiest way to find out which motherboard is on the computer. It does not require turning on the computer and installing any programs.

This method is good when your motherboard won't start.

Turn off your computer and unplug the power plug;
Open the side cover of the system unit (if the system unit is facing you, then this is the cover on the left);
Take a close look at the motherboard itself (this is the largest board standing upright. All wires are connected to it);
Try to find any inscriptions and numbers on the board with your eyes.

It looks something like this:

Motherboard model Gigabyte

Identifying your MSI motherboard model

Asus motherboard model designation example

If there are no alphanumeric symbols on the front side of the motherboard, and you do not have the opportunity to install a special program to determine the motherboard manufacturer, then you need to unscrew the board from the case, having previously disconnected all devices and cables from it and find a sticker with the model number on the back her side.

Method number 2 - Install the Aida64 program

Aida is probably familiar to many users. After all, it is with its help that you can without problems the temperature of the processor and video card in load and without it, by running a short stress test of a computer or laptop.

You can download Aida64 from the official website. It has a 30-day free trial period. During this time, you can easily solve problems with computer cooling or find out which motherboard is on the computer.

After you have installed the program you need to run it and go to the "Motherboard" section and select "Motherboard" again.

After clean install operating room Windows systems, it is often necessary to install missing drivers that were not found by the system in the standard image. In order to know which drivers will fit your motherboard, you need to know its manufacturer and model. Therefore, in today's article we will consider: how to find out your motherboard. Without this information, we will face a number of problems:

We will not be able to install the correct drivers;
We will not be able to find a processor;
We can't add RAM,
We will not be able to;

Also, if not installed required drivers on the motherboard, you will not be able to play 3D games, you will not have sound on your computer, you will not be able to play videos, and so on.

Probably the easiest way to find out your motherboard is to find a box from it. As a rule, when you buy a computer in a store, they give you boxes of components. This is done so that in the event of a defect or breakdown, the store can send the problematic part to a service or supplier. Therefore, we are looking for a box and look at the motherboard model at it. Other important parameters will also be indicated on the package:

the type of RAM that can be installed on this motherboard;
Information about the video card supported by the board;
chipset information;
bus frequency;
information about service utilities.

It often happens that the box from the motherboard has not been preserved, then you can look for a sales receipt. In most cases, the name and characteristics of the components are written in it. Or find a warranty card. If there are no papers, then perhaps you still have installation disk with drivers. We look at the information on it or in the help files.

How to find out your motherboard by disassembling the system unit?

If no documents and boxes from the motherboard have been preserved, then you can open the side cover of the system unit and see the model of the motherboard.

To do this, we perform the following actions:

Note!

If your system unit is still under warranty, then it is possible that after you remove the side cover, the seal will break and you will lose it;
If the name of the motherboard is hidden behind some component, then you will have to remove it. I advise you not to do this if you do not have the necessary skills. Otherwise, you may damage the device.

Therefore, if you do not want to go into the insides of the system unit, then let's look at software methods on how to find out your motherboard.

How to find out the model of the motherboard using Windows.

In order to quickly find out information about the motherboard, you can use the Windows command line.

In order to, click "Start" - "Run" or use the hotkey combination "Windows + R"
Enter the command "cmd"
Next, we write the code: wmic baseboard get Manufacturer

The program will give you information about the manufacturer of the motherboard.

There is also another way to find out the model of the motherboard, for this in the "Run" line enter the command "msinfo32"

The System Information window opens. Here you will see all the data about the computer that operating system could get. In my case, only the motherboard manufacturer is displayed. Not available under "Board Model".

As you can see Windows tools, it is not always possible to get necessary information, so let's move on to the next step.

We find out information about the motherboard using programs.

In order to get information about the manufacturer and model of the motherboard. Let's use special programs created for this purpose. Let's consider only free methods.

CPU-Z - this utility always helps me, motherboard, memory, and its similar GPU-Z version, allows you to answer a question:.

You can download the CPU-Z program from the official website. After opening the program, go to the "Mainboard" tab. Here the utility will lay out for you all the available information, not only about the model and manufacturer, but also about its main characteristics.

AIDA64 - I have been using this program for a very long time, earlier it was called Everest. Probably the biggest drawback of this utility is that it is paid, but there is a free period for 30 days. This will be enough for you to recognize your motherboard.

In order to find the information you need, start the program and go to the "Motherboard" tab. A window will open with the characteristics of your board, as well as a bunch of useful information... Using the AIDA64 program, you can install missing drivers, as well as update old versions to newer ones.

The functionality of the program allows you to view such important parameters as the frequency of the processor, memory buses, the amount of RAM. Knows how to show the temperature of the processor, video card and other components of the computer system unit. In order to test the components of the computer for stability, but also to determine in which hardware failures occur. You can use the "Test" tab.

Conclusion.

In today's article, we looked at several ways to find out your motherboard. I hope now you will have no problems finding required drivers... And also, if you want to update the processor, video card or add RAM, then when you go to the store and tell the seller the name of the motherboard, you will be able to choose the right components.

You can find out which motherboard is installed in a computer or laptop in several ways. Usually you need to look at the information about the "motherboard" when you need to install it. In this article, I will show you several ways by which you can definitely see information about your motherboard. So, let's begin...

1) It is not trite, but the first thing you need to look for a box from the "mother". If you assembled a computer from components, then it should be. It just shows the name and model:

2) If there is no box and was lost a long time ago, then there is an option with other "spare parts" that can go together if you bought a complete system unit or a notebook. In particular, I mean the instruction itself, or at least the disks. They also have a name:

3) If everything is really bad with the instructions, disks and the box, then the last "physical" option to look at the model of the motherboard is to open the system unit. Of course this way more suitable for "systemists", but the laptop can also be disassembled. But will you collect it later ... However, the fact remains. Manufacturers write the name of their product on all motherboards:

4) We open and enter into it

wmic baseboard get product, Manufacturer, version, serialnumber

If we decrypt this line, then we display information about:
Product - Model
Manufacturer - Manufacturer
Version - Version
SerialNumber - Serial number

If you do not need something, then you can simply omit the lines in the query. For example, if you just find out about the manufacturer and model (which is most often needed), then the line will be like this:

wmic baseboard get product, Manufacturer

5) Using special programs, which are designed to collect information about the computer. I wrote about this, for example, in an article? or . There, at the end of the articles, I gave links to similar programs. For example, there are a lot of them in the article.
You can even just use free program CPU-Z() and on the desired tab you will see your motherboard

Finally, I want to note that I did not describe in great detail about how to mono view information about the motherboard on a laptop. It is shown when you just turn on the "beech" and there is information on the black boot screen below. But I just don't think that you will memorize the necessary information so quickly and will sit with a piece of paper (and reboot several times because of this) when there are much easier ways to find out which motherboard model you have installed.

Hello everyone! Once upon a time, I wrote about what it is. A lot of time has passed since the purchase, so you reinstalled Windows, and now we need to download drivers for the chipset, sound and other equipment wired to the motherboard. (And as a rule, all disks and documents tend to be lost over time)

And here a question ripens in many minds: how do I know which model of my motherboard is? Or are you ripe for a purchase new graphics card or processor, again - until you figure out the motherboard model, it will be problematic to determine anything. If, in the case of drivers, you can find them by hardware ID, then in the case of an upgrade, this will not work.

Visually identifying the model and manufacturer of the motherboard

How to find out the model of the motherboard visually? Very simple, for this we need a screwdriver and good lighting. We unscrew the bolts from the side cover of the system unit and remove it further so as not to interfere.

Now the most important thing is to carefully examine the motherboard. Unfortunately, some manufacturers manage to write the name where you will not find it in the afternoon with fire. Typically, the marking is applied above PCI-E slot or near the processor. For example, in the photo below, the motherboard is labeled GA-790FXTA-UD5. It is this name that we will drive into Google or Yandex to determine the characteristics of the equipment or download drivers

This old-fashioned way has never failed, but I would not recommend it to you. Firstly, you will have to open the system unit (which is not good at all if it is sealed and is under warranty), and finding the name of the motherboard is not always easy (especially if you opened it for the first time, because there will be a bunch of inscriptions and you simply will not understand: what exactly here is the board model), and secondly there are ways much easier 😉

You can find out the model of the motherboard programmatically

The software does not stand still. The CPU-Z program is also developing. An excellent utility is designed to get information about central processing unit, but it will also help us to suggest the model of the motherboard. You can download it by visiting the official website of the program.

We kindly ask you to report broken links:

Go to download site CPU-Z programs [Size: very small]

So, open the program and go to the "Mainboard" tab. Here we can see the manufacturer in the Manufacturer line and the model itself in the Model line.

There shouldn't be any questions here, since the method is as simple as three kopecks. However, there are other programs to understand - what is inside our computer?

For these purposes, perfect fit AIDA64(in the old days it had the proud name Everest). The purpose of AIDA is just to show us complete information about the equipment installed in our computer. Unfortunately the program is paid, but it has 30 days trial period(I think this time will be enough to decide on the model of the motherboard)

In the left window, open the "Motherboard" and select "Motherboard" (I understand that I wrote crazy, but it is - look at the screen above)... In the right window in the line "Motherboard" we see the exact name of our motherboard.

How to determine the model of the motherboard using Windows

In my opinion, the easiest way to find out which motherboard is installed in the computer is by prompting in the command line. You do not need to install anything, just open the "Run" menu (if you cannot find this item, then read about that). In the window that appears, type CMD... Will open command line, this means that all that remains is to enter the commands:

- to determine the manufacturer of the motherboard - wmic baseboard get Manufacturer
- to determine the model of the motherboard - wmic baseboard get product

The picture below clearly shows how it looks.

In the article, it makes no sense to consider all the ways how to find out the model of the motherboard, and this is not necessary, because the steps given here allow you to fully answer our question. All the best 😉

In contact with