Enemy front program terminated what to do. The problem caused the program to stop working - solutions

Windows problems are a common headache for Windows users. In this article, we will understand why and why the "Explorer has stopped working" error occurs. sometimes it gets so bad that it becomes impossible to work. Some people immediately take out a disk or flash drive with Windows, demolishing the entire old system in one fell swoop, and we will try to do without such drastic and costly solutions.

What does it mean?

What does this error actually mean? Unfortunately, it speaks of the seriousness of the incident, since in this case the Windows file manager was terminated. The error of this important system utility in this case is not so catastrophic, otherwise the system would crash into a "blue screen", but this does not bode well either.

In this article, we will try to find out what the appearance of such a message means in each specific case, and also talk about methods of eliminating this dangerous bug.

Common cause

Very often all this occurs for the simple reason that some "left" software turns out to be incompatible with your version of Windows, along the way causing internal conflicts in the latter. If this program is at the same time registered in the context menu, then the scale of the problem becomes simply threatening.

Often the root of the problem lies in "clumsy" video codecs. This is especially true at the very moment when you open the folder in which all your films are stacked. If you observe such system behavior all the time, then you need to completely remove the problematic software (K-Lite Codeck Pack, for example).

Of course, do not forget about the products of evil hackers: Trojans and viruses that like to erase system files are often the culprits of problems. If you see the message "Explorer has stopped working", it is advisable to immediately scan your computer with one of the following two programs:

Dr.Web CureIt.
Kaspersky Virus Removal Tool.

Simply put, we do not recommend using Dr.Web CureIt for the owners of Doctor Web. If a regular program from a certain company did not identify and eliminate the threat in time, then it is unlikely that the correct definition will be found in the scanner's anti-virus databases. If these solutions do not help, you will have to resort to other methods.

Clean up the context menu

We have already said that the error is often associated with inappropriate behavior of third-party utilities. If you disable the defective component, the problem will disappear immediately. It is very convenient to use the compact ShellExView utility for this. You can download it from the official website, where you will also find the Russification file.

Then we launch the program and start sorting the values in its main dialog box by type. To do this, simply left-click on the column of the same name.

You should be interested in all the elements in which the "Context Menu" appears in one way or another. Immediately turn off all components in the manufacturers of which it is not listed itself. To perform this action, you must press the F7 button.

Then you can restart your computer. Is File Explorer Stopped Running Error Disappeared? We enable one of the previously disabled components of the context menu, and then reboot again. We check for an error, after which we continue to examine the list until the culprit is found.

in "Safe Mode"

Trying to boot into the system using Safe Mode. If everything works fine, we are looking for the cause of the failure in the installed programs. In the case when you see the message: "The program" Explorer "has stopped working," immediately proceed to the next paragraph of our article.

Recovering system files

This action is applicable in cases where, after using all the tips that are given in our article, the message “Explorer has stopped working” still constantly pops up. First, you need to run the command line emulation mode with administrator rights. To do this, click on "Start" again, look for the "Search" field there, and then enter the CMD line into it. The files found will appear on the right side of the search window.

On the one that has the same name as the command used above, right-click, and then select the "Run as administrator" item in the context menu. Everything. Immediately after that, insert there a command of the form: sfc / scannow. Press the ENTER button.

The system will run an automatic check and restore of system files. Be patient, as the program can take a long time to run. And why does it write “The Explorer program has stopped working” even after that?

Using "Clean Mode"

Left-click on the "Start" button, then in the "Run" field, write the msconfig command. Press the ENTER button. We are interested in the "General" tab, where you need to select the "Selective startup" item, and then uncheck the box next to the "Load startup items" option.

Next we go to the "Services". There you will need to check the "Do not display Microsoft services" checkbox. After that, click on "Disable all" and OK. Important! After that, you need to close all windows of active programs, save the results of your work and reboot.

The system will be launched in a lightweight state, only the most basic components will work.

If there is no error, then it is advisable to check the system for viruses, because there is damage to the system files. We have already talked about the elimination of this problem above. Here's what to do if your computer says: "Explorer has stopped working."

We diagnose the system in "Clean mode"

To do this, first disable half of the services (we already wrote where to find them). Then reboot your system. If the error disappears, the problem is in one of the disabled components. This checks all available services. It is long, but still better than a complete system reinstall when you lose all your user data and installed programs.

Checking "Startup"

If the service check revealed nothing, we work with this component. We load the system into "Clean Mode" again. Launch the msconfig.exe program again. We already wrote about this above, so read the above sections again. This time we are interested in the "Startup" tab, in which at least a few applications should also be disabled. Click on OK and send the system to reboot again.

We are looking for the culprit of the problem in the same way that we used when working with services. If we see the message "Explorer has stopped working" again, what should I do in this case?

Alas, the faulty program will have to be completely removed. If you cannot do without it in your daily work, then you need to go to the developer's website and download the latest (or older) version of the program. In addition, consultation with technical support sometimes helps. Note that the "System Restore" service can also help if a bug has started to appear recently.

System Restore

Click on the "Start" button, select "Control Panel" in the menu that opens. There is a "Restore" option. Click on the link, after which a dialog box of this system utility opens. In it, you need to left-click on the "Start System Restore" button.

The working window will open again, where you can select a specific date on which the system will be pumped out. We recommend that you choose the state as early as possible, since in this case the probability of eliminating the error becomes much higher.

Finally

If all of the above did not give any result, there are two ways: either negotiations with technical support from Microsoft itself, or a complete reinstallation of the system. It is advisable to use the sfc / scannow command, which automatically generates the CBS.log file.

You can find it using "Search" in the "Start" menu. This document will be required by the support service to determine the exact cause. We hope that the error "File Explorer has stopped working" will be fixed by you.

For some Windows users, out of the blue, an error related to the bsvcprocessor program starts to appear. It would seem that there is nothing wrong with that, but the trouble is that the error appears every 10-15 minutes, which is really unpleasant.

Solving the problem with the bsvcprocessor error

Most often, bsvcprocessor is one of the components of the Bing bar program, which can be installed along with DirectX, Skype and other applications from Microsoft. This can sometimes be due to viruses. Accordingly, this problem can be solved in different ways. Let's take a look at Windows 10 as an example.

Method 1: Uninstalling the program through the "Control Panel"

Whether you need a BingBar or not, you need to uninstall it. If you still need it to work, you can reinstall it later. The easiest removal is to do it via "Control Panel".

1. On Windows 10 "Control Panel" can be opened through the desktop. To do this, you need to open the explorer and go to the directory above all the time. In the end, the contents of the desktop will open, all that remains is to select the desired item and double-click.

1. Among the items presented, you can immediately select "Remove programs".

1. To remove Bingbar, you need to click on it and click on the button "Delete".

Method 2: Delete BingBar Folder

It also happens that the Bing Bar is not installed on the system, which means that it cannot be removed through "Control Panel"... Then you can try deleting the BingBar folder.

1. To find where the folder you want is located, you can open Explorer, go to the address bar and write the following line:

% localappdata% \ microsoft

1. When Explorer opens the directory we need, we need to find the BingBar folder and delete it.

Method 3: Check for viruses

Since BingBar is a Microsoft software product, there should be more trust in it. Computer viruses are often disguised as system utilities to make them harder to detect with the naked eye. You can use the free Kaspersky Virus Removal Tool to check for viruses.

Download Kaspersky Virus Removal Tool from the official website

1. The best way to scan for viruses is in Safe Mode. To do this, you need to open Windows Settings and select a section "Update and Security".

1. Here you need to find the item "Recovery" and after opening it, press the button Restart Now.

1. After that, you will need to select the following items:
  Troubleshooting >>> Advanced Options >>> Boot Options

1. After passing all the points, you need to click on the button "Reload".

1. During boot, Windows will prompt you to choose what to do. There are three options for switching to safe mode. Anyone is suitable for checking for viruses, so you can click F4, F5 or F6 to activate safe mode.

1. When everything is loaded, you can open the Kaspersky Lab utility, click on the button "Start Checkout" and mark all the items for verification.

1. Scanning for viruses can take a long time, depending on the number of files and computer resources.

Conclusion

Error "The bsvcprocessor program has stopped working" does not appear at all. When it appears, it is better to try all the proposed solution methods, since the causes of its occurrence can be very different.

When working with the Windows operating system, the user may have an unexpected problem, which is the failure of the system explorer. Usually, at the same time, icons disappear from the desktop, and the inscription “ The program Explorer has stopped working... What caused such a nuisance and how to fix it?

Finding the cause of a system failure

Immediately, we note that the main reason for this error is the presence of third-party software on the computer, which, by its actions, affects the correct operation of the system. The common belief that failure Windows Explorer(this is how the service is called) appears as a result of errors in the OS itself incorrectly, since the system itself cannot influence the behavior of processes during normal startup.

The main reasons for unsatisfactory performance Windows Explorer can be called:

untimely installation of OS updates;
operation of an outdated or outdated version of the driver for the video card;
the impact of a malware or virus on your PC;
installed applications from an unknown vendor, which can provoke incorrect operation when launched Windows Explorer;
failure in the system registry, which is also a consequence of the influence of third-party software.

How can you fix the problem?

Step 1. Check your computer for malware

If you already have an anti-virus program, then you should update its databases, and then run a full system scan. Of course, verification can take a long time, however, it is worth it. By the way, when detecting infected programs and suspicious objects, it is preferable to use the function of their complete removal. At the same time, the antivirus will show the path to each file, so you should independently remove not only these files, but also all components of the dangerous software.

Step 2. Updating video card drivers

Older driver versions can significantly affect performance Windows Explorer so it's worth updating them in a timely manner.

In order to update the driver, you need to go to Task Manager and find the link Video adapters... Then we right-click on it and run the driver update. If you have everything in order with the drivers, then you can skip this item, however, to clear your conscience, it is still worth checking the integrity of all system files.

You can learn more about how to check the integrity of files. Remember that if there are corrupted files in the system, you may need an installation disc with the current version of the OS to troubleshoot.

Step 3. Disabling programs from the context menu

If problems with Windows Explorer continue to make you nervous, then you should try to disable the components of third-party programs in the context menu. This can be done using the utility.

When the program starts, we sort the table by type and turn off one by one all the elements that are in the line Context menu and are not a product of the company Microsoft... Then we reboot the system and, using the exclusion method, we find the program, due to which there is a malfunction. Windows Explorer.

The probability of solving the problem using this utility is quite high, however, if the incorrect operation of the explorer continues, then the only correct option would be to reinstall the system itself. This should be done as a last resort, because it is not a fact that on "clean" Windows when starting one of the previously downloaded utilities, the user will not again encounter problems in work Windows Explorer.

There are often errors that occur globally in all games and programs. Such a universal error is ... What is characteristic is its distribution among all software on the computer (GTA 5, Sims 3, 1C, Skype, etc.). Often the whole system suffers, and the failure occurs in all versions of Windows (7, 8.1, 10).

Fixing the problem in Windows 7/8/10

In fact, there can be many reasons. You need to look at the source of the downloaded software - the left (hacked) copies fail very often. Download only on official resources. Check the system through CCleaner, execute two options in it - "Cleaning" and "Registry"... Run the function from the admin "Command line" and there run the command: sfc / scannow.

Most often, failures occur due to problems with compatibility... Try standard operations with the problematic application - run as administrator, connect compatibility with Windows Vista SP 2 and XP... I will separately mention the need to enable the option "Troubleshooting Compatibility Issues", it is also in the same tab. Try reinstalling the program in a different directory, it is best to place it on the system C-drive. If all of these movements fail, try the following.

Viruses

Trojans not only block access to the Internet, but also various software. Replacing the already built-in files, the utilities in the system start to work incorrectly. Their natural action is to disconnect.

Building Windows

Few people decide to buy Windows. Because of this, you have to download little-tested assemblies that are assembled by amateurs. Hence, errors in the operation of the system are inevitable. Utilities become clumsy, updates are not loaded, files are lost.

Buy a license or download software from a trusted vendor. Since Windows 10 is free, its choice is already obvious to many. In the seven, the most stable is x64, where the latest build updates are applied. It is better to download a clean image, without the addition of additional programs.

Update

Installing up-to-date add-on packages is an important step towards stable operation of the OS. If updates are installed incorrectly or are missing altogether, the utilities will refuse to start. In the modern world, many programs will simply not work without loading up-to-date data. This applies to new Windows build updates, drivers, etc. The same should be said about standard .NET Framework and DirectX, which it is desirable to update to the actual ones. Microsoft Visual C ++ fresh versions can also be downloaded, but keep in mind that some programs require certain versions of the renderer.

Internet access

The network is an important point for many games. Error "The problem that occurred led to the termination of the program" may appear due to blocking of the Internet. Many anti-piracy utilities require an Internet connection to verify the license.

Disable or reconfigure your antivirus for the problematic program. Deactivate the Defender temporarily. Make sure you have a normal speed from your ISP. The firewall must pass all data through itself.

Third party modifiers (mods, patches, scripts, cheats, etc.) games are already a problem. If you do not want to constantly get banned and a bunch of errors, then refuse to use modifiers. The same goes for patches. Only add-ons from developers can be used, and when installing other software, all responsibility lies solely with you.
If the game was obtained from Steam, then try the standard cache check starting from admin, shift launcher- launching the game directly.
Restore the game files or reinstall it. Probably, something was lost, so the game is not able to function as usual.
Disable all utilities on the PC. Run only one game. There is always a risk of conflicts between software. This launch can be done by “ clean boot system ".
Sometimes users download beta versions... In this case, problems are inevitable. Be sure to make sure that your game has already been released and is being officially distributed.
Don't forget about technical support. Sometimes the error appears due to the fault of the developers, there are crashes on the servers, or problematic updates have been released. Here, only those who provoked it - the developers - can solve the problem.
Separately, it should be said about the great importance of the correct video settings for games. In this regard, a small video on the problem in GTA 5 will help you.

If you are faced with the Explorer problem, then you need to understand that there can be a large number of reasons for its termination, so we will research and find sources. So, you got the error " The Explorer has stopped working", What to do?

Option # 1 - Fixing "The Explorer has stopped working" with the ShellExView utility

This tool helps to get rid of Explorer errors in most cases. You can download this link: http://www.nirsoft.net/utils/shexview.html

After running the program, click on the column Type, this is how we sort the list;
In this column, you mainly need to look after the type Context Menu, also column File Extensions must have an asterisk opposite certain points, we will need this today;
Items that relate to Microsoft are not of particular interest to us, so we will cut down third-party ones. Select a parameter with the mouse or arrows and turn it off by clicking F7;
Disable one of the items to begin with, and then restart the computer. We check the conductor. If an error appears, we continue to work.

As I said, this method often helps. In a special case, we proceed to the following methods.

Option number 2 - Run the explorer through safe mode

You need to go into safe mode and make sure that the conductor is stable. Is everything working perfectly? So the reason is in some application installed on the computer. Think back to what you were doing before the problem arose. Viruses can also be the cause, so you need to check your computer for their presence.

If the problem is observed in safe mode, then the problem is in the system files. Read the solution below.

Option number 3 - Check system files for errors

A common way to solve many problems is. This is done using an elevated command prompt. We open it and enter the command:

sfc / scannow

The result of the check may be positive, or a message will appear that some files could not be checked or restored. Then you need to look at the information in the logs. We go along this path and look: C: \ Windows \ Logs \ CBS \ CBS.log.

Option # 4 - The problem is in viruses

As I said before, virus software is also the cause of many problems. You should use the following materials that should help:

Option # 5 - The reason is a system or driver update

If the system was updated, or the driver, then the software could be installed crude with flaws, so it will have to be done in other ways. How to do this is written at the specified link.

Option number 6 - Ask experts

If none of the above helped, then ask experienced specialists who can be found on various computer forums or write in the comments below.

In the next article I will tell you about. I hope you were able to fix the "Explorer stopped working" error.