How to remove updates on iPhone. How to disable automatic iOS update

It is often that such a situation, the iPhone hung when updating iOS 11, most often, hung on an apple, depend on checking the evaluation, or is constantly rebooted. In this case, how to cancel the update and get out of the hang, we will tell.

You can first forbid automatically download updates to "Settings", and why disable the automatic download of software updates on the iPhone and iPad, if the location in your device is not enough, it is necessary to free up more space for download.

How to stop iOS 11 update via WiFi shutdown

Everyone knows, download firmware updates to iPhone X / iPone 8/8 Plus automatically only when the device is connected to the Wi-Fi Internet. For this reason, it is necessary to stop the update, the first should be disabled iPhone or iPad from the Internet via wireless wi-Fi network. Then the download does not load not cancel, but only pauses, and as soon as you connect the device to the Wi-Fi network with an Internet access, the download will continue.

How to remove iOS 11 firmware in "Storage"

If the firmware download is executed, but you want to delete it and install it, then you can independently stop updating manually. To cancel the update, you need to delete the file of this update.

1. Open settings -\u003e Basic. On the page, click "Using Store and ICloud" page.

3. In the window that opens, click "Delete Update". And the iOS 11 firmware is removed.

How to roll back from iOS 11 on iOS 10.3.3 with Tenorshare Reiboot

After upgrading and installation, but do you want a downgrade? Then return from iOS 11 on iOS 10.3.3 Using a program that is a utility to correct iOS hang through the input and output from the recovery mode. At that time, it will reflash your iPhone 8 Plus / 8 / X / 7 PLUS / 7 / SE / 6S / 6 / 5S / 5C / 5 and restore the factory settings without losing data.

Step 1. To roll back, you need to download and install Tenorshare Reiboot, connect iPhone, iPad and iPod to a computer via USB port.

Step 3. In addition, you can manually import the firmware for a downgrade from iOS 11.

Step 4. After downloading, and click "Start Restore", and install iOS 10.3.3 to your device.

The Tenorshare Reiboot application has other functions if the iPhone is hung in recovery mode, or in dFU mode, reboots on the apple, the iPhone screen does not turn on and black, the apple is burning, and so on, all problems and errors are fixed through deep recovery in Tenorshare Reiboot. And it refers.

One of the benefits of iOS is the constant output of updates applicable to most devices. Gadget Checks availability new version Firmware and downloads it later "by air." This allows the device to upgrade without unnecessary trouble as connecting to a computer, work with iTunes.

In contact with

But sometimes this process is launched not on time. Unfortunately, apple company Did not provide for the cancellation of the firmware load. This problem has a solution.

Most often on the Internet, they advise simply disable the Internet, interrupting the downloading of the update. That's just repeated connection The network will resume the process. Reliable solution will be deleted update at all.

If for any reason you do not want to set the next iOS update to your iPhone or iPad (for example, iOS 12 on the iPhone 5S or the Beta version of iOS) and the "red circle with a single" is no longer a corp to you, then be sure to check maybe The update itself has already been loaded on the device and takes a lot of places. How to remove it?

On iPhone and iPad with iOS 10 installed and newer

1. Open the application Settings and go along the way Maintenance → IPhone repository → Storage.

2. Scroll down a bit and select the downloaded iOS update.

3. Tap "Delete update".

4. Confirm the deletion.

On iPhone and iPad with iOS 8 installed

1 . Go to Settings → Maintenance → Statistics → Storage → Storage.

2 . Select the downloaded iOS update. Due to the fact that the file size is usually more than 1 GB, it is most likely to be located at the top of the list.

3 . Click " Delete update"And again" Delete update"To confirm the requested action.

There are only a few simple actions, and downloaded iOS update, which takes more than 1 GB will be deleted from your mobile device.

If necessary, you can re-start the firmware update process. To do this, it is necessary in the menu "Settings" → "Basic" → "Software Update" Press the button "Download and install".

After the release of iOS 7, about half of the incoming correspondence on our editorial mail is reduced to two issues:

• how to roll back to iOS 6.x
• how to remove the iOS 7 downloaded update from the device

The answer to the first question we have repeatedly voiced - to great regret and for us, and for readers, for all devices, except iPhone 4, rollback from iOS 7 on iOS 6 is impossible. On the iPhone 4, you can help saved SHSH Hisi from iOS 6.1.2 or older versions of firmware, if you have - pay attention to (but know that anyone needs for experiments version of iTunes. under 11.1). We cannot guarantee 100% success, but it will hardly be worse.

As for the second question - there is a solution here. Recall that the problem is that iOS if there are Wi-Fi in the background, the update itself is downloaded by weighing about 780 MB and independently conducts it unpacking, after which it eats already 3 with an excess gigabyte of free space. At the same time, the jailbroken devices are technically impossible to update through the air, so the downloaded update is a loss free space + Annoyable badge on the settings icon. How to delete downloaded iOS update?

All who use the jailbreak, you need to remember: iOS updates swing in the folder / VAR / MobileSoftwareUpdate /,within which you will find a subfolder containing in the name of the version number of the downloaded firmware. Clean the contents of this folder \u003d free space.

But this is only a semi-meter, because the stronger iOS again jumps an update at the first opportunity. In order to fully block the ability to download OTA-updates and remove the badge from the settings icons, you will need a tiny, but extremely useful tweak No Update. From Cydia (lies in the standard MODMYI repository).

How to be those who do not use the jailbreak? Access to the / Var / MobileSoftwareUpdate / MobileSoftwareUpdate / without Jail. It is impossible to organize, clean the firmware through tweaks like ilex r.a.t. - Especially, IOS manually will not remove the downloaded update. The only way erase downloaded update - make full reset Content or the restoration of the firmware, but in this case you can no longer be able to put the same version of iOS, which has been with you, you have to flash on iOS 7.

There is only one trick: the update will not be able to unpacked if he originally will not be enough space. So if you score your iPhone, iPod Touch. and iPad movies, games and other heavy content so that it was less than 3 GB of free space, iOS 7 does not unpack. But you can't call such a way to solve the problem;)

Automatic system updates - one of many new features in iOS 12. When it is enabled, the device is automatically updated to latest version operating system. In this instruction, we will tell how to disable this option.

When it comes to updating software, it is better to control this process itself. As a rule, new version of iOS. Go out without serious mistakes. But there are unsuccessful releases that spoil the feeling from using the device.

Up to iOS 12, Apple had an intermediate automatic update function. Users received a notice of whether they want to update the iPhone or iPad at night. If the answer was positive, the device was automatically updated when the owner slept. In iOS 12, Apple removed this opportunity.

The new feature responsible for automatic updates is disabled by default. But if it was activated earlier, for example, during the initial settings iPhone Or iPad, you can quickly disable it.

How to disable automatic system updates in iOS 12:

1. Open the Settings application.
2. Go to the "Main" → "software update" section.
3. Select "Auto-update" and translate the toggle switch to an inactive position.

In the same way, automatic updates can be activated. In this case, that the device is updated itself, it must be connected to the Wi-Fi network and a power source.