DVD drive is not displayed in Windows 10. Shared folders, network computers, flash drives, discs on the "Network" tab of Windows Explorer

Hey! I noticed that the information about another error in Windows 10 began to appear when the laptop does not see the Wi-Fi network. The problem is quite ordinary. We want to connect to the Internet via Wi-Fi, turn on the wireless network, do everything according to the instructions, but in the list available for connecting networks, these networks are not. That is, Windows 10 does not see any Wi-Fi network to which it would be possible to connect. And the Internet icon itself (which is on the notice panel) has an antenna view with a red cross.

That's actually such a problem, with which, as I understand it face. Yes, they immediately appear thoughts about the fact that in the radius simply there are no available Wi-Fi networks, so the laptop does not see them. But, as a rule, when such a problem appears, there is a Wi-Fi network. Other devices see them. Well, let's try to figure it out. By the way, the problem when Windows does not see the wireless networks, it appears not only in Windows 10, but also in Windows 7, and other versions.

Laptop on Windows 10 does not see Wi-Fi: a few solutions

Let's start with the fact that if you have an antenna icon on the notification panel in the form of an antenna with a red cross, and when you click on it there is a Wi-Fi button, then this is a problem one. About the decision of which I will write below. But if there are no Wi-Fi buttons, then another problem is already. See the article. And you can look yet.

1 First thing, you need to make sure that Wi-Fi really catches in the place where you are. This can be checked on another device. For example, the phone. Maybe such that Wi-Fi networks simply do not have, here they are not displayed on your laptop. If you have only one network in the house, yours, then restart the router. Also, you can restart the computer on which such a problem has appeared.

2 You can try to run troubleshooting. Sometimes it helps. Moreover, it is not difficult. Click on the Internet connection icon on the notification panel, and select Diagnostics troubled.

The diagnostic window will appear.

Windows will try to find from eliminate the possible reasons why the laptop does not see the Wi-Fi network.

3 We check whether the WLAN auto-tuning service is running. If this service is disabled on your computer, then Windows 10 will not be able to see the Wi-Fi network. This service is sometimes disabled different systems "Optimizers" systems.

Go to service (right-click on this computer icon and select "Control", or through the control panel), go to "service", find the "WLAN auto-tuning service", and look in what status it is. It should be in the status "running", and the startup type "automatically". Like this:

If the service is disabled, then press it with the right mouse button, select "Properties", set the start type "Automatically", click "OK", and restart the computer.

If Windows 10 does not see only your (one) Wi-Fi network

In the comments to the article on connecting tens to wireless network left such a comment:

There is a Wi-Fi home network, all devices see it, connect and work, and the laptop with Windows 10 does not see this network. At the same time, it sees other networks. So, I advised to change the name of the SSID network, and change the channel. Alexander did it, and helped. The laptop connected to the home network.

Many different cases and solutions I described in the article the Universal article, suitable for Windows 10.

Update: Change of the region in the Wi-Fi properties of the adapter

In the comments, Timofey suggested an interesting solution that can be useful. He did not want to see one laptop to see one, specific Wi-Fi network. Laptop on Windows 10.

The essence of the solution is to open the properties of the Wi-Fi adapter in the device manager, and on the Advanced tab, selecting the "Country Region (2.4GHz)" item "Change the value to" # 5 (1 - 14) ". Perhaps in your case the installation of another value will help. Need to try. Like this:

I did not check. I have no property at all. "Country Region (2.4GHz)". But this does not mean that the way is not a worker. Be sure to try. Write about the results.

The latest version of the popular operating system was officially published in the middle of the summer of 2015. For the past segment, many have already managed to acquire updates and at the moment are the happy owners of the "dozens". However, Euphoria on Windows 10 faded after users began to notice some errors in the functionality. Actually, there is nothing surprising in this - nothing is completely. This is especially true of Windows products, which always tries to be in advanced positions, creating unique technologies and devices.

However, skillful users quickly revealed flaws in the new version of the OS. One of the most common problems that often becomes the object of complaints is the dispensation of the DVD drive. The developers withdrawn even the November update, since it was after his release that the public began to indignant and disturb such problems. So what to do if Windows 10 does not see the CD / DVD drive?

Why does Windows 10 sees a drive?

Many users of "new clothes" complain that after the transition from the previous version, the conductor began to selectively notice the DVD drive.

Despite the impermanence, when viewing with BIOS, no failures are observed and the CD / DVD-ROM is displayed as it should be. The problem comes from the software component of the OS.

Specialists voiced 3 The main reasons at this level are a violation of the drive driver; Systems in the system associated with incompatibility of a number of applications and OS; The problem is in the actor provoked failure.

In turn, the system may not detect the drive due to the lack of its connection to the motherboard or its banal physical breakdown. Problems that do not concern the repair or repair of the drive can solve the simple user without the help of professionals.

What to do to make the drive in Windows 10?

It is curious that the development developers are informed and in order to facilitate fate and help users, the company's forum published several correction options.

Eliminate the problem with the command line

The first option is based on the command line. To begin with, activate the string using the Win + X key combination or through the "Start". In the new dialog box, you must enter the following:

rEG.exe Add HKLM \\ System \\ CurrentControlSet \\ Services \\ ATAPI \\ Controller0 / F / V EnumDevice1 / T

REG_DWORD / D 0x00000001

Then press ENTER. After that restart the computer. The drive is ready for work and defense.

Restoring Drive DVD Icons With DVD Drive. REPAIR

In the second way, the creators of "dozens" are advised to eliminate the problem to use special programs. For example, install the CD-DVD REPAIR CD-DVD program (you can download it after you go on the link www.dvd-drive-repair.en.lo4d.com/).

After installing it, click the icon and check the box opposite the "Reset Autorun Setting" field. During a small time, the tool will eliminate existing problems, after which a message will appear on the end of the tool.

After the message restart the computer. In the case when it comes to software breakdown, CD-DVD Icon Repair will not help you. Noticing a mechanical malfunction, utilities will not necessarily report this to the user.

Other ways to solve the problem

In general, you can help clean the system from unknown devices. To implement such a procedure, use the device manager in which you save your computer from unnecessary and unknown devices, after which you reboot.

The root of the problem can be in the drivers. This option is possible if you installed the "top ten" with the available OS one of the last two versions. Therefore, you need to update the drivers.

The absence of the letter on the drive can also cause a failure or "invisible" CD / DVD-ROM mode. To check the presence of the letter, follow these steps:

1) Press Win + R;

2) dial diskmgmt.msc;

3) Press ENTER.

After performing these simple actions on the computer screen, the disk control window will appear. Check the list and find your drive. If the letter is missing - assign it.

If you are a laptop owner, then it is possible to ban on the use of the drive is activated in the BIOS settings. In this case, disconnect this option.

The prohibition can be exposed to PC, but such cases are extremely rare.

If you have questions about "Windows 10 does not see the CD / DVD drive, what to do? "You can ask them in the comments.

There are many ways to exchange data between PCs, but not all of them are equally convenient and effective. It is also important to which network is carried out such an exchange, global or local. If the network is local, the use of cloud services will be less rational than combining computers to one working group in which data can be transmitted without any intermediaries.

Technically, the organization on the local network does not represent a special difficulty, which cannot be said to eliminate one of the most common problems when the computer does not see other computers on the Windows 7/10 network. The problem may be caused by various reasons, but most often its source becomes incorrect network settings and disconnected services. So, what often prevents computers to see each other on the local network?

View a list of PC available on the network is not difficult, it is enough to deploy on the "Network" conductor transition panel or execute the command nET VIEW.

If computers are connected, and the command returns "no items in the list", check the settings listed below.

Network detection

Open the command control / Name Microsoft.NetworkandSharingCenter "Network and Shared Access Control Center", go to advanced options and make sure that the network type of the network profile is used by the network profile. Next, check that network detection, files and printers, and Windows allowed to control the domestic connections in the profile settings.

Now go to the "All Network" profile and enable (if disabled) sharing for network users, and password protection, on the contrary, disconnect.

Return to the Network Management Center, click "Changing the Adapter Settings", go to the properties of your adapter and check if the bird is installed in the checkbox "Sharing files and printers ...". Checkbox in IP version 6 (TCP / IPv6) must also be installed.

In Windows 10, access to all these settings can be from the "Network and Internet" section of the parameters. Please note that the option "Make this computer available for detection" in the properties of your connection should also be active.

Working group

The reason that computers do not see each other in the Windows 7/10 local network, the incorrect settings of the working group can be. Open the system properties, on the "Computer Name" tab, click "Identify", and when the wizard starts, select these settings:

• The computer enters the corporate network;
• My organization uses a network without domains;
• The name of the Working Group - Workgroup.

After that, you need to restart the computer and make sure that the type of network is exposed to "private". Workgroup is used by default, do not change it if possible. All computers on the network should use one (the same) name of the Working Group, and this is a very important point.

Service browser service

In Windows 10,1703 and above, the problem with the network environment can be associated with the disconnected or, on the contrary, working in the network browser service. Look, whether you are active in the Windows component section SMB 1.0 CIFS protocol. If so, try to turn it off, thereby you deactivate the network browser.

If the browser is disabled (in the latest versions of Windows 10 it should be), try to enable, and then reboot and check the correctness of the discovery of computers on the network.

Other network services

Network detection problems in Windows 10 1803 have to face more often than in other versions of the system. This is due to the restriction of the working group functionality, which Microsoft considers an outdated component. In this version, a number of services that are responsible for finding other computers on the local network can be disabled. If computers are not visible in the Windows 10 network environment, you need to make sure that these services are included:

• Publish the function detection resources (type "automatically");
• SSDP detection;
• Computer browser (see above SMB 1.0);

Turning on these services on all computers, reboot. If other settings are set correctly, your PC must detect other resources on the local network.

Reset

If Windows 7/10 still does not see the computers on the network, it is perhaps to reset network settings to default values. To do this, open the command line or the PowerShell console on behalf of the administrator and perform such commands:

• netsh int ipv4 reset my.log;
• netsh int ipv6 reset my.log;
• netsh WinSock Reset.

To reset the settings, you will need to restart the computer, what Windows will notify you. But even such a measure does not guarantee the correct network detection. There are other reasons why there is no computer on the network, in particular, the incorrect operation of the drivers (rarely), as well as blocking the connection by third-party firewall and antivirus.

When updating the system from Windows 7 SP1 or Windows 8.1 to Windows 10 (through the procedure), a number of users began to complain that the system stops seeing DVD / CD drive. In the BIOS / UEFI, the drive is determined correctly, but in Windows 10 itself it is not displayed in the device manager, or is displayed, but with an exclamation mark. The problem was found on laptops / netbooks from HP, Lenovo, Acer and Dell.

In the CD / DVD Device Manager, the drive can be displayed with an exclamation mark with one of the following errors:

• Windows Cannot Start This Hardware Device Because Its Configuration Information (in the Registry) is incomplete or Damaged. (Code 19)
• The Device Is Not Working Properly Because Windows Cannot Load The Drivers Required for This Device. (Code 31)
• A Driver (Service) for this Device Has Been Disabled. An Alternate Driver May Be Providing This Functionality. (Code 32)
• Windows Cannot Load The Device Driver For This Hardware. The Driver May Be Corrupted or Missing. (Code 39)
• Windows SuccessFully Loaded The Device Driver For This Hardware But Cannot Find The Hardware Device. (Code 41)

In this article, we have collected several ways to restore the performance of the CD / DVD drive in Windows 10. If there are problems described, it is necessary to successively try all these techniques.

Method 1

First of all, you should try to delete the device in the device manager.

Method 2.

In the event that DVD drive is not displayed in either the device manager or in the conductor window, try to re-create the registry keys responsible for the operation of the drive DVD.

Method 3.

Try to delete non-standard CD / DVD settings in the registry similarly to the scenario described in the article.

The release of the new operating system Windows 10 took place in July. Therefore, many users have already updated the software and actively use the new OS, because it is distributed free of charge. But, as it always happens, the new Windows has its imperfections. For example, many complain that Windows 10 does not see the DVD drive after updating the system.

Why Windows does not see the drive

So, when updating the old OS to a new Windows 10, some users have such a problem: the conductor stops seeing the DVD drive. At the same time, when viewing the equipment through the BIOS, the installed CD / DVD-ROM is displayed correctly.

The reason is usually at the operating system program level. But if we consider all possible reasons, then the following can be allocated:

• troubleshoot drive driver;
• failure in the work or incompatibility of some programs with the Windows system;
• CD / DVD drive failed.

Fix the first two reasons quite under the user. What should I do for this, consider further.

Error correction methods

It is worth saying that Windows developers are aware of an existing problem, so on the official Microsoft Forum you can find one of the options for solving this error.

Using command line

When using this option, the sequence of actions is as follows:

After rebooting, the drive will work and correctly displayed in Windows Explorer.

Using the DVD DRIVE utility (icon) Repair

Another option to correct the situation with the missing CD / DVD-ROM is the use of special programs and utilities. One of these programs is CD-DVD icon Repair, it is very simple to eliminate the problem with it, for this:

Finally

If, in spite of effort, the operating system does not see the DVD drive, you can directly contact the Windows 10 developers.

The official Microsoft website has a Russian-speaking forum to support users (it is located at: http://answers.microsoft.com/ru-ru).

Here, after a simple registration, you can ask a question to community participants or ask for help from Microsoft specialists.