Update 1C Error Invalid data warehouse format. We use standard error tools

If 1C does not start: Enterprise 8 and the program issues an error - "Invalid data warehouse format", then you should not fall into panic. Consider the solution to this problem on a living example. To defeat this error, first of all, you need to identify the reason that caused such behavior of the program 1C: Enterprise 8.

Detection of reasons for the appearance of an error 1c enterprise 8

On a note: If the recommendations below are incomprehensible to you, and the error needs to correct urgently recommend to look up to us - Smart1C.ru.

The accountant told me that yesterday on the eve of the end of the working day, she made a Windows shutdown, and the computer did not want to turn off and had to pull the power to 220 V from the outlet. Here I started thinking ... and that it came to mind:

Because of the wrong shutdown, the PC files on the hard disk did not write correctly.
An idea that it was still necessary to thwart this information. After all, because of the incorrect completion, the platform files can be damaged.

Actions after viewing 1C data format error

Began to look for this error about the wrong data format in search engines on the Internet. Search founded the following - it turns out that this error is not so trivial, as it is originally it seems. But, by reading the article on this topic on this topic, I learned the recommendations that you need to clean the temporary files - 1C cache: Enterprise 8.

Information on Cash 1C. Cash 1C Enterprise 8 is an area on a computer where 1c platform Enterprise 8.3 saves files with different service information. On the Internet, they wrote that incorrect data in the cache may appear, for example, when the electricity is disconnected during data recording, as part of the data in this case will not be recorded, from here and the glitch appears. Cleaning Cache 1C Enterprise 8 With such errors, along with testing and fixing, the base is the main service functions that restore the program performance.

Manually clean temporary files did not want, I decided to search for a script designed for these purposes. I climbed a little bit on the forums and found a bat-file, I looked at his test content (there were commands to remove files and folders of the 1C platform from the user profile), then double clicks launched it (see the script content below).

After the bat-nickname was fulfilled and closed, I tried to run the 1s program again - this time a window appeared with a user selection 1c, and after the 1C authentication procedure and the program 1C. Mission accomplished!

BAT-file for cleaning cache 1c enterprise 8

It would be unreasonable to simply give you a BAT-file for cleaning cache 1C, without considering its contents present in it commands. So, what do these command line commands mean Windows:

del / S / Q% UserProfile% \\ APPDATA \\ LOCAL \\ 1C \\ *. *

rD / S / Q% UserProfile% \\ APPDATA \\ LOCAL \\ 1C \\

del / S / Q% UserProfile% \\ APPDATA \\ Roaming \\ 1C \\ 1CV8 \\ *. *

rD / S / Q% UserProfile% \\ APPDATA \\ Roaming \\ 1C \\ 1CV8 \\

del / S / Q% UserProfile% \\ AppData \\ Roaming \\ 1C \\ 1CV82 \\ *. *

rD / S / Q% UserProfile% \\ AppData \\ Roaming \\ 1C \\ 1CV82 \\

Create commands to the text file by opening "Notepad", then "Save as" and give the file name by specifying the extension. For example, "cache.bat".

My explanations - the @echo OFF command turns off the data output to the screen, the DEL command - deletes the files from the specified folder, * - means all files, command - deletes folders. The rest of the content I think it is quite clear, and if not write to me in the VC group, I will try to explain or can help in solving the issue remotely (on a paid basis, through the TeamViewer program). The specified file can be run in all versions of Windows, also in the new Windows 10.

I also want to say that 1s cache cleaning still helps in cases when the program 1C starts and immediately fliesSo take a bat-file to weapons.

On this Lyfhak, by solving the issue of the incorrect format of the 1c data warehouse, the enterprise 8 is completed. If you have any questions or something did not work out, I recommend contacting by mail This email address is being protected from spam bots. You must have JavaScript enabled to view. .

In today's article I will tell you what to do in such a situation: you launched the program 1C EnterpriseNext began the process of updating the version of the program and suddenly it is interrupted with an error message: " Failed to update. Invalid data warehouse format”:

In fact, there is nothing terrible in this error, and most often it is fixed quite simple - enough clear Kesh 1C. . I tell how to do it:

1. First of all, close the program 1C.And make a copy of the database just in case. To do this, go to the folder in which the database is stored, and copy a file somewhere. 1CV8.1CD.:

2. Now we need to know what folder is stored temporary program files 1C. To do this, start the program again 1C: Enterprise. In the starting window, select the name of your information base and click on the right button " Setting”:

In the window that opens, see the path to which 1C temporary files are stored. I have this next way: C: \\ Users \\ Vladimir \\ AppData \\ Roaming \\ 1C \\ 1CV8 \\ TMPLTS:

Cashem folders will be located at C: \\ Users \\ vladimir \\ APPDATA \\ Roaming \\ 1c \\ 1cv8. In your case, the path may be like that :.

3. So, close 1C.. Then we go to the folder C: \\ Users \\ user_name \\ APPDATA \\ Roaming \\ 1c \\ 1cv8 (If you do not displays the folder APPDATA., then read the first comment under this article). Here we allocate everything folders with alphanumeric long names And belel remove them:
After deleting folders, we start the 1C enterprise again. This time, the program update must be successful and the error "incorrect format of data warehouse" should not be repeated.

Users of the 1C enterprise accounting program (version 8.3) While working with the program can suddenly meet with the message "Invalid data warehouse format", after which any path on the disk is specified. The error is massive, manifests itself for several years, and is usually associated with a violation of the integrity of the information base of the program "1C". We will analyze the most common causes of this error, as well as the options for its solution.

As I mentioned above, the error is massive, showing itself both on the modern configuration 8.3 and on earlier system configurations. The causes of dysfunction usually the following is:

The next update of the program was incorrect;
The user incorrectly completed the operation of the program (in some cases, neglect users simply turn off the power cord of the working PC from the outlet);
Random failure in the work of the product (which leads, in particular, to the inconsistency of the cache cache by the structure of the base).

The error solving algorithm "Invalid File Storage Format" is based on several key methods that we will consider below.

How to correct the error with the data warehouse in 1C 8.3

Let us dwell on several ways that have already proven their effectiveness in deliverance from error.

Remove the cache program

First of all, we need to clear the cache of the program - temporary service files used by the program "1C" during its work. Such a cache is stored in several specialized user profile folders that will need to be cleaned.

Close your "1C". Then press the Win + R keys combination, in the window that appears, enter the command:

% UserProfile% \\ APPDATA

And press Enter.

The contents of the "APPDATA" folder will open, here we need to find folders:

APPDATA \\ LOCAL \\ 1C \\

APPDATA \\ Roaming \\ 1C \\ 1CV8 \\

APPDATA \\ ROAMING \\ 1C \\ 1CV82 \\ - and delete all their contents.

After the completion of the cleaning procedure, start 1C again, the error "Invalid data warehouse" error can be corrected.

We use standard error tools

Another effective way to get rid of an error with an incorrect format of data warehouse in 1C 8.3 is to use specialized tools to correct errors in the database. Open your database in the configurator mode, select the "Administration" tab, and click there on "Testing and Correction ..".

You can also use the functionality of the chdbfl.exe utility, usually located in the folder Program Files \\ 1CV8 \\ Your version of your version 1C \\ Bin. In the BIN folder and the specified file is located, after the start of which you need to specify the path to the database file (you can learn in the list of available configurations), as well as put a tick on the fixes found by the error program.

We delete the database from the list, and then restore it

Quite an effective way to correct the problem with the storage of data is the following:

Run the program "1C";
From the list that appears, select the information base in which you have an error (click on it);
Click on "Edit" to the right, and copy the path to the information base (the option "Information database" option). Hover over it, click PCM, select "Copy";
I remember the name of the base, after which it is closing this window;
We delete this problem base by clicking on it, and choosing "Delete" to the right;
Now click on the "Add" button, select the option to add to the list of already existing information, after which I click on "Next";
At the very top, we write the name of the base, and in the Catalog of the Information Base "insert the path copied by us earlier. Click down to "Next" - "Ready".
Run our database in a standard way.

Transfer data from one base to another

Immediately warn you that this method is unsafe, and can lead to data loss. It is worth using it as a last resort, if the foregoing methods turned out to be ineffective. Perform the following:

Create a clean base with the same configuration and structure as the initial;
Using the standard tool "Unloading data loading XML" (available in the "Data Conversion" configuration onto an ITS disk), transfer the data to the clean base. (LuggageloadingXML ");
Run 1C with the created base.

Rules Database Structure

Create a database backup;
We deploy an empty information base from which you remove the configuration file (.cf);
Remove with the support of the specified non-working configuration;
We perform combining with a saved CF file, then restore support.

Conclusion

Error "Invalid Data Storage Format 1C 8.3" is a direct consequence of the violation of the structure of the user base. An effective solution to this problem is to clean the product cache, as well as deleting the database with subsequent overwriting, which allows you to correct the error of the wrong data format in 1C on the user PC.

In contact with

Nov 08, 2017 32634

A situation may occur when 1C 8.3 does not start and an error appears - "wrong data warehouse format" indicating the path to the File C USERS Config Runtimecachestorage file. But, you should not panic, the error of the wrong storage data format is not so rare as it may seem at first glance. Therefore, in this article, let's learn how to fix the error in 1C 8.3.

Causes The appearance of the error "Invalid data warehouse format" in 1C 8.3

As a rule, the error appears due to not correctly completing the operation of the program 1C 8.3, or an unexpected computer shutdown. And to correct the error of the wrong data format, you do not need to do anything with the database, in most cases it is enough to clear the temporary 1c files, or clean the cache 1c.

What is 1C 8.3 cache?

Cash is a special folder of the current user on the computer, where the 1C platform saves various service information. And if the data in the cache was not correctly recorded, errors may appear. Cash cleaning with such errors, along with testing and fixing the base, are the main service functions that restore the program performance.

How to clean 1C 8.3?

Cash files are stored in the AppData folder, in the user profile, under which the program is launched 1C 8.3. The easiest way to open it through the Start command \\ execute \\% UserProfile% \\ AppData

Here we need to delete all the contents of the following folders:

APPDATA \\ LOCAL \\ 1C \\

APPDATA \\ Roaming \\ 1C \\ 1CV8 \\

APPDATA \\ ROAMING \\ 1C \\ 1CV82 \\

After performing the removal operations again launch the program 1c enterprise 8.3 and rejoice in life.

Clearing 1C cache can help when there are various problems with the start of 1C enterprise 8.3, even when when started, it immediately closes. So, cache cleaning can still come in handy in practice.

Company 1C produces many software products and constantly improves their internal structure. But the number of diverse errors with which you have to face programmers and administrators 1C shows that in this area the work will never stop. Some of these mistakes are insignificant and are rare, but there are "classic" disadvantages familiar to each experienced specialist. The latter is the last error "Invalid Data Storage Format" and it is advisable to be able to solve it.

Data Warehouse Format Error Solutions

To meet this error, it is not necessary to allow serious logical errors in the code or delete the main module. Often, after updating the configuration, opening processing, turning off the electricity or rebooting the computer at the launch of 1C, this unpleasant surprise occurs. If the reboot did not help, do not panic - the widespread error has simple solutions that can help. We will disassemble them according to the degree of complication:

In addition to the time you start configuration, the error "Invalid data warehouse format" may be detected when opening external processing. In this case, the most important thing is not to run 1C, since when starting the system lifts temporary files in the TMP directory. It is in it that find our processing - the file named "V8_ *" and the extension of TMP. If there are many such files, then to understand which one is our processing - change the EPF extension and try to open through 1C.

If you have already launched 1C and fastened files, then try to carry out similar actions on another computer where processing started. Or use utilities to restore remote files on the hard disk.