Error 36 Mac OS when copying. Bugs during the installation process MacOS Mojave

Sometimes Code 36 errors type "Blue Screen", related to hardware, may be caused by RAM damage (RAM). If you are encountered with random reboots of the computer, sound signals when loading or other software malfunctions (in addition to bsod 36 errors), it is very likely that there are damage to the memory. In fact, almost 10% of applications drops in Windows are caused by memory damage.

If you recently added a new memory to the computer, we recommend temporarily removing it to make sure that it is not the cause of the Code 36 error. If this action eliminated BSOD, it is a source of problem, and, therefore, the new memory is either incompatible with That your equipment is either damaged. In this case, you will need to replace new memory modules.

If you did not add new memory, in the next step it is necessary to make a diagnostic test of the available computer memory. The memory test allows you to scan for serious memory failures and periodic errors that can be the reason for your blue screen of death 36.

Although the latest versions of Windows contain a utility to check RAM, I extremely recommend using MemTest86 instead of it. MEMTEST86 is a BIOS-based testing software, unlike other test programs running in Windows. The advantage of this approach is that the utility allows you to check all the operating memory for the presence of Code 36 errors, while other programs cannot check the memory areas involved in the program, operating system and other running programs.

ON SOME RARE OCCASIONS WHEN TRYING TO COPY FILES, MAC Users May Encounter "Error Code 36", Which Complety Halts The Copy Or Move Process In The Mac OS X Finder. The Full Error IS usually Read AS "The Finder Can't Complete The Operation Because Some Data in" FileName "CAN't BE READ OR Written. (ERROR CODE -36) ". The Filename IS Sometimes .ds_store, But It Can Happen with Just About Any File On A Mac Too.

If You Run Into Error Code -36 on A Mac, There's usually A Really Simple Solution Town Tool Called "Dot_Clean". If You've Never Heard Of Dot_Clean, You're Certainly Not Alone, And The MANUAL Page for the Command Explains That It "Merges ._ * Files with Corresponding Native Files." Which May Not Sound Like Much to The Casual User, But Given The Ot Cause of Error 36 Are Files Prefixed With A Dot, That Can Be Exactly What You Need To Do.

How to Resolve Error 36 in Mac OS X Finder WITH DOT_CLEAN

To use Dot_Clean, You'll Want to Point It at the Directory Which is Being Copied and Throwing The Error Code 36, The Basics Look Like This:

Launch The Terminal (Found In / Applications / Utilities / Or With Spotlight)
AT The Command Prompt, Type:

dOT_CLEAN / PATH / TO / Directory / WITH / PROBLEM /

WHEN DOT_CLEAN IS FINISHED, ATTEMPT The File Copy Again and It Should Succeed With No Error Code

For example, if Copying ~ / Documents / FileBackups / Is The Problematic Directory, USE:

dot_Clean ~ / Documents / FileBackups /

That SHOULD BE ALL THAT IS NECESSARY TO RESOLVE THE ISSUE, JUST BE SURE TO AtTEMPT The File / Directory Transfer Immediately After The Command Is Run.

Technically You Could Point Dot_Clean At An Entire Volume But That's Probably Not Necessary Unweusly Trying to Backup An Entire Drive Manually Is Continuously Trying to Backup An Entire Drive Manually.

IF The Problem IS Recurrent and You Get It Constantly WHEN TRYING TO COPY FILES TO AND FROM A, A NETWORK SHARE, EXTERNAL DRIVE OF SOME SORTWORK SERE COMMAND LINE, WHICH CAN WORK AS A TEMPORARY WORKAROUND IF For some reason dot_clean fails. That Was Actually What I Had Done In The Past to Get Around This And Oter Similar Input / Output Error Messages Before Discovering This Specific Command Approach.

I Just Ran Into This Recently and Found That Dot_Clean Worked Fine to Resolve Error Code -36 When Copying A Directory From A Mac with OS X 10.9.5 to a Mac with OS X 10.10.3 And Also to A Windows PC, The Original Machine WAS REPEATEDLY THROWING THE ERROR. IT APPEARS AS If This Error Has Had An Uptick with Mac Os Since Sierra, El Capitan, and OS X Yosemite As Well, Maybe Suggesting Some Incompatibility with Certain Dot Files from Osther Os Versions. Unlike Some of the Error Weird Error Messages in Mac OS X, A Reboot Or Didn't do the trick. A BIG Thanks to Jacobsalmela for the Easy Solution.

If this WORKED FOR YOU, OR KNOW OF ANOTHER TRICK TO FIX ERROR CODE 36 IN THE MAC OS X FINDER, LET US KNOW IN THE COMMENTS.

67 comments

2 4 HR Sessions with Different Senior Mac Advisors. We Tried At Least 2 Dozen Solutions
FTOM TERMINAL TO SHUTTING DOWN TO SAFE MODE
No Solution Worked.

hard for Me to Believe That Apple Cannot
RESOLVE THIS.

sony Video File From Camera Fails AT Every
Copy Attempt. Error 36.

Hello, I ALSO DID THE DOT_CLEAN FOR MY PHOTO LIBRARY AS I Have the Same Error Message Within The Photoolibrary. But Stil Gives Me The Same Error Message Again. (Macos High Sierra Backing Up On Seagate 1T)
What Else Can i do?

In My Experience Terminal Did Not Work, Dot_Clean.

If It Does Not Work Download 'Commander One' and Use This To Transfer The Files.

This Worked for Me and Seems to Allow Transfer of Files Larger That 2GB.

I'm trying to Copy A Movie File To A USB Stick. Your Instructions Are Unclear to Me. Please Tell Me What I Specifically Have To Type Into The Terminal. I know Nothing about the Terminal, and I Mean Nothing.

TriED Dot_Clean ... and most of the Files in the Memory Card Disappeared ... ..Lost Had a Heart Attach ....Ejected the Memory Card ...Plugged It Back in and All Was Well ... .could Copy Again. Thank You Very Much

I've Been Getting Error 36 Moving MP4 Files to An Nas Drobo 5n. Unfortunately, Dot_Clean Doesn't Help. Using Command-D Works, But Only One File At A Time.

Thanks You So Much.
The Dot_Clean Worked A Treat On My Photos Library File Pictures \\ photos Library.photoslibrary When Was Doing A Big Copy of All My Files in My Pictures Folder.
All The Other Files Had Been SuccessFully Copied Except Those That Were Alphabetically After The Photos Library.
SO I Just Copied Those Few Independently.
I am Really Grateful to All of You. You Saved Me Trauma and Hours of Work That I Would Have Sport Trying to Solve The Problem.
Carol

I Have A Mac Mountain Lion - Which I Downloaded & Upgraded Into El Capitan, Which Works Fine for Me Despite Very Font Bugs - Which Occur Like Font List Becoming Invisible on Adobe InDesign. This Is a Simple, Minor Annoyance. Not Sure If It's Related to This or Not. Maybe It's not.

But My Real And More Current ISSU IS with the Kingston USB Disk As I Had Files On It. HOWEVER, IT SEEMS TO THINK THAT THERE ARE FILES ON IT EVEN IF THERE'S NOT.

I Get An Error Code -36 and I Also Get A Raise Without Handler Error Message On This Specific, Single USB. (.Indd & .pdf files most) - When it first SHOWED UP, I ATTEMPTED TO ERASE ALL FILES BUT I FEAR IT MAY HAVE COMPLICATED THE PROCESS.

I Have Looked at Quick Tutorials With Dot_Clean Solution But It Doesn't Seeem to Work. The USB IS Empty and Yet When I Re-Insert The USB - Sometimes The Files Show Up, Sometimes It Doesn't. Seems like a Paradox to me.

I ALSO TRIED OUT THE DISK UTILITY IN AN ATTEMPT TO USE DIGITAL 'FIRST AID' - UNDER EXTERNAL DRIVE:

⇒ Kingston Data Traveler 3.0 Media (Reads As Empty With Bar With All Space Unused) - IT Says 'First Aid' Was Successful, But 'Erase' Was Unsuccessful.
Then There's Sub-Header Kingston Underneath IT. 'First Aid' and 'Erase' Does Not Work Here.

Short of Abandoning This USB, I Am At A Loss As to A Solution to Fix This USB Or to Use it Again.

Any IDEAS OPTER OPTIONS?

Wish i Could Test This Out But i'm Trying to Transfer 45GB Through My Network and It Takes a Few Hours. The Damn Error Came Up WHEN IT WAS AT 43.15GB. FML!

Super Great Fix!

I HAD A DMG Image On My Time Capsule On Which I Had Saved All My Tv Shows That Were Not Mounting Anymore On My Desktop: -36 imagediskmounter

I Just TriED Dot_Clean ~ / Desktop
THEN RESTARTED THE COMPUTER AND IT WORKED

Thanks a lot !!!

This Unfortunately Wasn't Worked For Me.

An External Hard Drive I Keep Around 600GB of Music On Was Becoming Unstable (Unmouting Randomly and Not Appearing in Finder Window for Up to An Hour) So I Got Another External Drive and Tried to Move Everything Across.

I Type Dot_Clean Then Leave A Space and Drag The Folders to Be Copies in. Once it SHOWS THE PATHS TO THOSE FOLDER I HIT ENTER AND DRAG EVERYTHING TO THE NEW DRIVE. Sometimes I Get Another Error 36 Before The First Folder Has Transferred, Sometimes After A Dozen. NO REAL. Noticeable Pattern.

Any Updates Tips Would Be AppReciated

I Just Wanted to Say Thank You for This COMMENTS. Just Wanted to Share My Experience in Case IT Helps Someone Too.

I Use Lightroom, SO Have All My Managed Photo Files and Folders on An External Hard Drive, Which Is Copied to Another Drive by Carbon Cloner. I Wanted to Copy It Again To a Mobile Hard Drive for Use Away From Home.

Ised File Synchronisation At First to Copy The Files and RepeateDly Got Errors - Sometimes 900 of Them. SAME OF I JUST DRAGGED AND DROPPED MANUALLY. I TriED The Dot Clean on Every Single Volume Involved But It Didn't Help. I MANUALLY WENT THROUGH EACH FOLDER AND REMOVED THE OFFENDING FILE AND THEN COPIED IT BACK - AARGH. I GOT MY First Copy /

The Library And Decided to Start Again With a New Copy - The Error 36 Started Again. I Couldn't Bear The Files Again. I Ran First Aid On The Drive With Disk Utility - And A Couple of Changes Were Made, I Then Used Carbon Cloner to Copy The Files and It Worked - A Random Photo and An iPhone Video - Apparently 'Sitting ON Bad sectors. I Have Deleted Them from Within Lightroom and Copied Back Back Back Ups SO WE WILL SEE If This Solves The Problem. I am Very Happy to Have A Complete Copy Though - and v. Chuffed That CC Overlooks The Errs. In My Case Think It Might Be a Sign The Drives Are Failing, So Another Reason I Need So Many Back Ups (There's Another In The Cloud). Time to RESTRUCTURE!

Thank you for this. IT Solved My Problem.

I Was Trying to Copy An Old SD Card to My Hard Disk. There Are No Dot * Files on The SD Card Yet I Was Receiving -36 Error Code.

This Immediately Solved The Issue. I DON'T KNOW Why But It Has.

Please Advise and Help for The Following Issues. I WANT TO COPY FROM USD TO MAC. ITS show Error-36. I TRY TO FOLLOW Your Guide Solving This IsSues. The Problem is IDK What is 'Path', 'To', 'Directory', 'WIT', 'PROBLEM' IN MAC SINCE IM NOT FAMILIAR WITH COMPUTER AS IM ONLY User.
Please Advise If You Can Help Me. Thank you.

best Regards
Victor Dragono.

SO I Can't Do the Dot Clean to Fix A File That's On a Mounted Disk? The File That Is Giving Me The Error When I Try to Move It Is On My Main Drive. I'm trying to move it to an external ...

Having The Same Problem ... I Want to Move A 50GB Final Cut Pro Library to An External Harddrive to Free Space, But After Copying Around 2GB IT SHOWS "Error -36".
I don't get anything to work with the description above using the "dot_clean" function .. or I'm Missing Something?

If You are Getting The Error While You are Copying Things to the Entternal NTFS Drive, Try to Mount The Drive in Windows and Remove The Mac Specific Files. In Case You May Need to Run Check Disk to Clean The Drive and You Can Run It from Command or from the Drive Properties Toolbox on Windows.

SAME PROBLEM HERE AS WELL, BUT NOT WITH ALL CD'S THAT I AM UPLOADING. I am Transferring Old CD-R Discs of Images to An External Hard Drive and Getting The Error 36. NOT ALL FOLDERS HAVE THE ERROR ON THE SAME 'CD. This Is Occuring Maybe 5% of the Time. I've TriD Copying to My Mac's Desktop, But The Same Error Occurs. Any Thoughts?

... .. Elso, In All Cases, I Will Transfer A Certain Portion from The Folder with the Rest Receiving the Error. OCCASION, I CAN TRANSFER 1 BY 1. IS This Signs That My Burner Is Failing?
- Are the CD's scratched or Damaged? I Find That This Error Also Occurs When A File Can't Be Read Because The Physical Media Is Damaged. A Solution That I Found Was To Use
  
  cP -R / Path / To / Damaged / Folder / An / External / Hard / Drive
  
  IT DID NOT SUCCESSFULLY COPY EVERYTHING, BUT UNLIKE FINDER IT DID NOT STOP WHEN IT CAME ACROSS A BAD FILE. IT Displayed Which Files IT Failed to Copy As It Went, Also.
  
  I Have the Same Problem !!!
  
  My CD-R's Are in Perfect Condition and Have Been Stored Properly. THEY WERE ALL BURNED IN 2007 AND 2008.
  
  I am Transferring Old Images from CD-R's to An Error on My Mac - "The Finder Can't Complete The Operation Because Some Data in" Img_8834.jpg "CAN't BE READ OR Written.
  (Error Code -36) ". The Error Occurs Usally Part, Mid or Towards The End of Transferring A Folder of Images. Some Folders Go Through Without An Issee, Most Don't.
  
  Note, I Only Receive the Error on Imation CD's. I've Been Transferring From Sony, TDK AND MEMOREX WITHOUT ISSUE. Some Imations Give ME NO Trouble, But Most Do. I Borrowed A Friends Mac and Got The Same Issue However I Was Able to Get a Few Extra Photos Before Ether Error Occurred.
  
  ALSO, WHEN I PUT MY CD-R IN AND SEARCH IT UP On Disk Utilities, My Repair Disk Option (First AID) Is Grayed Out So No Go On the Disk Repair.
  - GOT A FIX FOR PEOPLE WITH A SIMILAR ISSUE !!! Originally, I Burned All Images to CD-R's using A Windows Based Computer (Non-Mac) And Decided Yesterday to Try to Copy Images from An Old Dell. WELL, IT WORKED PERFECTLY AND I Have TRANSFERRED ALL IMAGES NO PROBLEM TO AN EXTERNAL HARD DRIVE. The Issue Would Appear to Be My Mac Having Difficulty Reading The Imation CDS. I Borrowed a Friend Newer Mac (2014, Compared to My 2011) And The Same Issue Occurred, Except I Was Able to Get a Few More Pictures from the Newer Computer Than My Own.

I Simply Went Into Disk Utilities On The Mac, Selected The Volume
In Question and clicked on the "repair disk" Button. This Fixed
This IsSue for Me This Time.

If This Had Not Worked, I Would NEXT Plug The Drive Into A Windows
Platform and Perform Chkdsk / F on the Corresponding Drive Letter.

This is Exactly What i Did, When Copying Large Video Files From The External Hard Disk (Seagate) hashened. IT Solved The Problem for the Time Being.

This Is One of the Reasons People Dont Want To Use Macs. SO Many Errors. IS NOT FUN TO USE A MAC. IT IS VERY DIFFICULT AND YOU MUST HACK EVERYTING TO GET IT TO WORK RIGHT. This is Simply Trying to Copy A File, And I Am Getting This Error Which Cannot Be Fixed. All I Am Trying To Do Is Simply Copy A File.

Can This Dotclean Work on a Folder in An External Hard Drive? I Keep Getting The Error When Trying to Transfer Music Files From One Older Hard Drive to the New One. Thanks!

I am Getting This Error 36 Repetedly Also, I Have Tried Dot Clean, An App to Remove The Ds Files, and Still I Get This - Why Does Apple Not Fix This?

Oh Trying This Over and Over. IT SAYS "DONE" FOR THE DOT CLEAN, BUT I TRY TO COPY IT RIGHT After AND IT DOESN'T WORK. I am Getting Repeated Errors from a Hard Drive That I Am Trying to Remove Everything from And Reformat (If Possible) And I Even Tied Dot Cleaning Individual Files and It's Still Not Working. HELP !!!

I Am Trying to Backup a Large Video File and I Get This Error. Even When I Am Duplicating The File In The Same Directory.

This Dot_Clean Thing Does Not Work for Me. I ALSO TRIED REMOVING THE .DSSTORE IN THE FOLDER.

IT STOPS AT 1.56G of 3.4 ALWAYS. I Wonder If This Is A Bad Sector or Something, I TriED A 'Verify Disk' But Didn't Return Anything SO 'Repair' is Disabled.

I Have Just Attempted The Above Fix and I Am Happy to Say It Has Worked A Treat. Please Note One You Write Dot_Clean You Can Then Drag The File Into The Terminal Window Which Will Convert IT Into The Correct File Path :-)

help Please My External Disk Doesn't Copy Any File, I Try to Fix IT by Terminal Dot_Clean But I Got This Message:

Failed Trying To Change Dir to .documentRevisionS-V100

FAILED TRYING TO CHANGE DIR TO.SPOTLIGHT-V100
Bad Pathname: Permission Denied
Failed Trying To Change Dir to .trashes
Bad Pathname: Permission Denied

cAN SomeBody Help Me !!

i Have this EXACT SAME ISSUE, Is This Something To Do With El Capitain Release? I'Ve Read That This Was An Issue With Previous Versions of OS X

One Problem: If You're Dealing with An Old File Saved to A DVD, AS I am, Files on A DVD / CD Are Not Editable (The Source Is Not Editable). This Creates A Catch-22: I Need to Remove The "Dots" to Transfer; I Need To Transfer to Remove The Dots! I'm Sure That There's a Solution ... a Clone, Mirror, Disc Image ... Something. I'Ve Just Begun To Look.

I'm trying to Copy Some Files to An EXTERNAL HARD-DRIVE AND I KEEP Getting Error-36. I Noticed That It Only Happans with Large Video Files, Can Anyone Help? I'm using a MacBook 15.

I Found Mine to Be An SMB Problem and Connected Over AFP and IT Solved The Problem. Apple's SMB HAS HAD Issues Since They Rolled Their Own in 10.7

Okay, SO I'm Running Yosemite And Here's The Issue I'm Having Here. Due to a Long Story I don't Want to Get Inded Up Losing a Lot of Photos from My iPhoto with no backups to recover from. One of these Albums Was My Professional Wedding Photos. Fortunately I Still Have the Original DVD SO I Figured It Would Be Simple Enough to Just Import Them Back Into iPhoto. For WHATER REASON, IT WILL COPY / IMPORT UP TO ABOUT THE 115TH PICTURE AND THEN GET THIS: The Finder Can't Complete The Operation Because Some Data in "DF0117.jpg" CAN't BE READ OR Written.
ERROR CODE -36)
I Was Hoping I Could Get Around this by using the "Ignore Permissions" TRICK WHEN I SELECT THE DISC AND HIT CMD + I BUT IT SAYS I CAN ONLY READ.
Completely AT A Loss Here. (Why LET THE REST? WTH?!) I ALSO Attempted to SideStep The Import Process and Just Copy The Foles from the DVD Right to A Folder on The Desktop to No Avail. (Actually That's Where I Got The Error Notic ABOVE IF That's Relevant)
Any Suggestions / Advice Would be Greatly AppReciated.

Last Login: MON JUN 15 11:12:55 on TTYS000
GERARD-GALLAGHERS-IMAC: ~ GerardGallagher52 $ / Volumes / Airserver 5.3.2 Dot_Clean

still Wont Let Me Launch Airserver After This Am I Doing This Right.

No You're Not Doing It Right, and You Can Not Modify a Mounted Volume Disk Image. Your Disk Image of Airserver Is Probably Corrupt And May Need To Be Downloaded Again, Your Best Bet Would Be to contact the Creator of Airserver and Ask Them for Support ABOUT THEIR PRODUCT.

The Proper Command Would be (IT WONT WOK BECAUSE MOUNED IPAGES ARE LOCKED)

dOT_CLEAN / VOLUMES / AIRSERVER \\ 5.3.2 /

Thanks for Sharing This Terminal Command.

For Use the Free Utility Onyx (www.titanium.free.fr) Which Has a Feature to Remove .ds_store Files.

In Onyx Navigate to Maintenance\u003e Rebuilding, Second Paragraph Down "APPEARANCE OF FOLDERS 'CONTENT" IS THE OPTION YOU NEED TO TICK. This option (Singularly) Will Delete All .ds_store Files ON Your Startup Volume. Below That There Are Options to Select a Specific Folder and Options to Remove .ds_store File From Only This Folder or Another Option to Remove from This Folder and All Sub-Folders.

THANK YOU !!! I Was Not Comfortable with the Command Stuff and Download IT with the Mentenance and Running It With The Mennioned Box Checked Worked For Me - Thank You So Much!

Any ideas Why My Time Capsule Has Decide That Some of the Files On There No Longer Belong To Me. WHEN I LOK AT THE PERMISSIONS IM NO LONGER LISTED AS THE OWNER AND NO ONLY HAVE CUSTOM PERMISSIONS THAT NO LONGER ALLOW ME TO EDIT THE FILE OR DELETE IT?

There Are A Couple of Things Worth Trying, in My Experience (Someone Correct Me If I'm Off Base, Please). 1) If you can get to the TC Drive (I Think That It Should Be Visible in Disk Utility) Try Repairing Permissions. I'Ve Heard That Many Times About Macs - They Usually Work Well, But If They Start Acting Squirrrely, Repairing Permissions IS A Good First Step. 2) Try a Utility Like Onyx. Onyx is from France and Is Free. One of the Things It Does When You Run It Is To Repair Permissions. Use the "Automation" Button from its Menu and It'll do its actions automatically. 3) AS Suggested Above - Diskwarrior. I Just Got My Copy, (Which Comes on a Flash Drive), But Haven't Run It Yet. It 's Had a good reputation in the Mac Community for Many Years.

Hi, Prescott, Before Ripping Your 'Mini' Apart Have You TRIED Any Disk Repair Utilities Like Apple's "Disk Utility" Or-Way Better- "DiskWarrior"?

- Dot_Clean Did Not Work for My iPhoto Library ... But Carbon Cloner Works Well, for What Ever Reason Carbon Cloner Just Moves Past The Error and Clone The Directory No Problem.
  - Didn't work on My MacBook Either. Got This On Terminal:
    
    Last Login: Wed May 2 12:24:28 on Console
    Evas-MacBook-Pro: ~ Evagotzsche $ Dot_Clean / Path / To / Directory / WITH / PROBLEM /
    Failed Trying to Change Dir to / Path / To / Directory / WITH / PROBLEM /
    
    Evas-MacBook-Pro: ~ Evagotzsche $ Dot_Clean / Path / To / Directory / WITH / PROBLEM /
    Failed Trying to Change Dir to / Path / To / Directory / WITH / PROBLEM /
    Bad Pathname: No Such File or Directory
    Evas-MacBook-Pro: ~ Evagotzsche $
    
    Anyone WITH Other Ideas to Fix Error Code 36 ??
    - You Have to Change / Path / To / Directory / WITH / PROBLEM TO THE THE FILDER

Oh My Goodness, I've Been Suffering From Exact Issue Recently! In Fact, I Had to Decommission An Old Mac Mini Because Both The Internal HDD and An Add-on Lacie Drive Suffered This Problem When Trying to Move * Any * Files. I'm Going to Resurrect The Mini to Try and Salvage The Files ... and Use the External Drive for Future Storage!

- I SPOKE TOO SOON. That Drive Is Completely Done - WON'T EVEN MOUNT. Considering i'd Have to Starting Taking Things Apart With Crowbars, I'Ll Just Call It A Loss.
  
  Hello, I TriED Dot_Clean and It Didnt Work for Me, Ive Been Trying to Move My Photo Library to My Lacie Back Up But With No Success. Does Anyone Have Another Solution for Me? Thank you.

Apple provides not only comfortable and beautiful, but also easy to use products, many of whom will love even a child. However, the combination of art and technologies, with a light hand of Steve Jobs entered into our lives, in itself cannot guarantee one hundred percent protection against user misunderstandings. Especially for such cases and there is our Genius heading, in which we disassemble the questions that do not require "surgical intervention".

In the first question, received on Twitter from a permanent reader Antonik1983. We are talking about notifications and their influence on the most controversial parameter of modern equipment - autonomy.

The "Lock and Home" indicator, as seen from the name, reflects the time to use the gadget not only on the application screen or in the Settings menu, but also in the lock mode. The nuance that should be clarified is in the latter. The fact is that each notification comes to the device by default turns on its display. If there are many such events that under modern use scenarios are not uncommon, the aforementioned indicator will grow, and the battery life, respectively, to shrink. Your humble servant also faced this problem, and it turned out to be solved very simply. To do this, go to the "Settings" menu and select the "Notifications" item in which you select the applications and translate the "on the locked screen" switch to the "Off" position. In this case, the sound of the event will still play, and the notification itself will be displayed after unlocking the device. What kind of programs should not be disturbed by the "sleeping" display - the thing is purely individual, but first of all it is worth paying attention to the item "Mail". Here you can configure the display of notifications only for the list of VIP-senders, which significantly reduces the screen time of the screen, if you come many emails.

If you do not feel about the most avid "mobile" players, the following "Under the Knife" you can safely send gaming applications. The number of notifications sent by them often exceeds all imaginable limits, so the effect of their fine setting is noticeable immediately. Well, for iPhone users in iOS 9 there is a temporary option - just put the iPhone display down, and the notifications will stop turning on the screen. The function is supported on all iPhone, starting with 5s, and for its correct work, you need to enable the "Calibration of traffic accounting" option in the Geolocation Services group section "Privacy" menu "Settings".

The second question concerns the work with the Finder - the built-in File Manager MacOS.

Due to the various logic of interfaces, the transition from the same Windows (and on the contrary) rarely passes painlessly, and the author himself asked his newcomer to be a newcomer. In order to quickly create a shortcut, go to the folder containing file (in the case of applications, you can select "Open" from the context menu by pressing the right mouse button on the icon in Dock). Then we appeal to the context menu of the file itself, where you choose the item "Create a pseudonym" ( Make Alias.). The last step is to transfer a shortcut from the open directory to the desktop.

The last question is related to malfunctions when working with the library photo in MacOS.

In such cases, the problem may consist in accumulated errors in the file system. A favorite means of "Machsodes" comes to the rescue - the terminal program. We find it in search Spotlight and enter the following command:

dot_Clean / AddressEDiaki

Do not forget to indicate the full path to the library, carefully checking the drive, the logical section and the subdirectory in which it is located. By default, the library is stored on the HD disk in the corresponding username of the "Image" subdirectory of the "Users" folder ( Users.). By the way, if you have any problems with the very media, we recommend trying

It's nice that some problems are solved even in the very home. If you are worried about any of them, be sure to ask a question in the comments below (or

Hey! In this article I will try to talk about how you can easily make myself a life when debugging iPhone- and Mac applications. It will be about debugging Exc_Bad_access exception, one of the most unpleasant in nature.

An exception Exc_bad_access It occurs when we are trying to send a message to the object that has already been released (Released). The situation is usually complicated by the fact that by the time when an error pops up, a challenge stack no longer contains information that could help us. That is, it is not clear which specifically the object was released. And, especially, it is not clear, in which location he was released :). More fun more fun if the application is multi-threaded.

Fortunately, guys from Applethey made every effort to help us. They created a stub class Nszombie.. If you enable it support (how to do it - I will tell below), after removing each object in its place (i.e., at its address in memory) will live "zombies" and receive messages, which will allow when debugging determine which object was Released and eliminate the error.

So, let's begin. One day, your iPhone- or Mac application began to fly out and in the debugger console you see the following message:

Program Received Signal: "exc_bad_access".

And, in fact, nothing more. The stack of call, most likely, also did not help you.

In the window GROUPS & FILES. (Left B. xcode.) Find a branch Executables. Right-click on the executable file of your application and select the item in the drop-down menu. Get Info.. In the window that appears, click the tab Arguments And add two environment variables: Nszombieenabled. and Mallocstackloggingnocompact.. Install Nszombieenabled. value Yes, but Mallocstackloggingnocompact. - 1 . As it should look, shown in the screenshot:

Now run your application and repeat the steps you need to play an error. In the debugger console instead of reporting Exc_bad_access You must see something like that:

2010-01-25 14: 35: 24.840 MyApplication *** -: Message Sent to Deallocated Instance 0x42a5060

This means that once you have a class object CFString. by the address 0x42a5060.. He was already released (Released), and your program does not get up and tries to send him a message Retain. It remains to find this object and find the place in the code where the extra release. Or not caused retaindepends on the specific situation :)

As follows: In the debugger console, type the following command:

Shell malloc_history 1393 0x42a5060

Instead of 1393, you should enter your process identifier (PID). You can post it in the error console message immediately after the application name. And instead of 0x42a5060, enter the address of the object, which was released (you can also see in an error message).

As a result, your eyes will face a terrible picture like this:

Do not scare, everything is not as scary as it may seem at first glance. Closer to the bottom Look for the names of classes and methods that are present in your code. That is, they are written. Somewhere there and the malicious challenge release. Look for and correct.

P.S. I have read the edge of the eye somewhere that you can catch such errors using the Instruments / Objectalloc. I would be very grateful if someone gave me on vodka ... oh, tip

Good day to all, dear cats, ladies and gentlemen.

Somehow for a long time (two years ago) I wrote an article on installing a hackintosha to your Intel-based PC. The article is outdated as the world, but still useful there is something there. For example, the installation order will be the same if you replace the Sierra installation file on High Sierra.

I myself use the hakinton for a long time, I write the code on it and I don't teach the soul in it (for all two years there was only one problem because of the kext). In this article I will tell you how to update your Khakintosh to High Sierra 10.13 and I will try to answer some questions that have questions since last article.

Without unnecessary words, let's start.

To begin with, we must have a car running on the Khakintosh. I hope you have it. If not, then read in my article (take the kekters from this).

So, as everyone knows, starting with High Sierra Apple moved to a new APFS File System Watching HFS. It caused a bunch of questions, but do not shout and faint, you can not use it. Yes, yes, I did not make a reservation. I am writing this article with my khaka, which spins on the HDD from Seagate, with the Apple Journal System (HFS) file system. Magic - you will say. No, just no one forces you to use APFS - I will answer.

Step 1. Update your clover to the latest version (Issue clovers 3 *** do not support High Sierra download). You can download. Pre-make backups total EFI section
Step 2.. Download the High Sierra update file from the App Store. Yes. Just download. Everything.

Step 3.. Mount the EFI section and restore the old config.plist. Open it on editing.
Create a core patch in Kernel and Kext Pathes:
Name: appleusbxhcipci.
Find: 837D8C10.
REPLACE: 837D8C1B.
Comment: Change Port Limit From 15 to 21.
Match OS: 10.13.X

In the same window, enable Kernel PM and AppleIntelCPUPM (help to correct Unsupported CPU in the future)

Restore old kekkers that you have had for Sierra 10.12 (if they were). You made backups, right? Just return them to the folder 10.12.

For normal loading, you will need these kekkers:
Lilu.kext.
Applealc.kext
Usbinjectall.kext
XHCI-200-Series-Injector.KEXT
Intelgraphicsfixup.kext (for Intel GPU)
Whatevergreen.kext (for AMD GPU)
Also, do not forget to grab the keset for your network card, Yeah.

We also need the APFS driver. It needs to download and unpack * .efi file to Drivers64UEFI folder on EFI / Clover.
Download magic

We unload the necessary kekkers to the folder with kexts for 10.13 (do not forget FakesMC).

!!! For users of NVIDIA video cards !!!
Before installing, install the last web driver as follows:
Change the following values \u200b\u200bin Clover Configurator:
1. BOOT - Turn off NV_DISABLE \u003d 1
2. GRAPHICS - Disable Inject Intel
3. System Parameters - Publish Inject Nvidia Web
Save the file and check that it is saved.

Turn on SIP (SYSTEM INTEGRITY PROTECTION):
Open the Clover Configurator and open your.plist
In RT Variables, change CSRACTIVATECONFIG by 0x00. Restart your hack. You can check the SIP by the CSRUTIL STATUS command in the terminal

Install the latest NVIDIA driver for your system (you can simply ask Nvidy to update them for you in the system settings). Also install nvidiagraphicsfixup.kext

For those who did not have time to update their drivers and updated on Hayserru, or if something failed

eugeneego writes:
"NVIDIA card holders with Web Driver on 10.13.3 (driver versions 387.10.10.10.25.156 / 157) can be shred with terrible permanent lags graphics.
Solution: roll back to the drivers for 10.13.2 (for example, on 378.10.10.25.106), with their supported version of the OS (for example, using WebDriver.sh). "

Now open programs. Choose "Installing Macos High Sierra". He will do his magic and asks you to reboot a compete, agree.

Slide in the BIOS download from the clover section to priority, because when updating it will restart your computer several times.
In the clover, select Install Macos High Sierra From. The update process will go.

If you decide to use APFS Indoor HFS

It is possible if the system determines your SSD disk - it will want to convert it to APFS without deleting your files. There is nothing terrible in this, just warning, while it will only convert the system partition, the rest will not touch.
For those who decided to use APFS for "Fresh" installation - Do not format The entire disk in APFS, as you lose the ability to access the EFI section.

A renewal process will go, which can stretch to hour. The main thing is patience.

After 60 minutes of happiness, the system will be established and will be ready for work (well, it should be in theory).

That's all:)
Write all questions in the comments or in a personal in VK, I will answer If possible. All cats: 3

Error 36 Mac OS when copying. Bugs during the installation process MacOS Mojave

How to Resolve Error 36 in Mac OS X Finder WITH DOT_CLEAN

Related

Related Articles:

67 comments