First inclusion iPad Air 2. Configure iPhone as a new

It so happened that the iPad became a very popular product: whether Steve Jobs is a genius, or something else, but it was not too lazy to acquire it. And very many, buying the iPad, nothing about it does not imagine. It would like to make such newcomers overview for iPad settingsWhen showing the possibilities that the iPad buyer has immediately.

It will be about the standard iPad settings. The topic I divided into two parts, as the settings are very much. So as long as I have only one iPad without 3G - then the 3G setting is still lowered.

How to configure iPad.

1. Setting up Wi-Fi

If you do not have a flower, then the digital photo frame mode is turned off and it is necessary to include in the "Main" settings -\u003e "password protection". On the "main" settings we will focus in the second part.

5. Safari settings

A detailed review of Safari on the iPad I already published. Part of the settings of the programmers of the operating system for the iPad were delivered to "Settings". In principle, according to the following screenshot, the utility that is there is: cleaning the story, setting the default search, etc.

When you first turn on the iPad, it is not loaded in full-fledged mode. It must be immediately activated and configured correctly. Without activation, the device will not work, so before buying a gadget, read the information about its configuration.

Before purchasing an iPad, make sure that the Wi-Fi network is connected to your home. This is not necessarily, but you can customize the gadget much faster. Press the inclusion key of the new gadget. As soon as it boots, you will see a picture of a cable and iTunes icon. Spend your finger at the bottom of the screen on the right side. The device will prompt you to put a convenient language and the city where you live. Make it and then just follow the tips assistant settings, which will help you step by step to perform the entire procedure. First, the device will prompt you to connect to the network. Then the iPad will automatically determine the place of your stay. This feature will allow you to use the iPad as a GPS navigator. You can refuse this feature and connect it later. Read the terms of the license agreement and give it its consent. Then "Assistant" will offer you to configure sending messages to customer support service. After that, you configure Apple ID - your unique code that will allow you to work with Apple programs. If you have already enjoyed Apple gadgets and you have a personal identifier, just skip this item. You have the ability to activate the gadget as a new or simply restore files from a backup of another Apple device. When the configuration procedure approaches the end, the alert will be displayed on the screen that you can start working with the gadget. Now he works fully! If you do not have a connected Wi-Fi network, you can configure and activate your iPad to another way - through the iTunes application. Download it from the official Apple site (this service is free) and install on your computer. In the future, do not forget to update the program - this is necessary for the uninterrupted operation of the gadget. Enable it and select the region.

The iPad bundled cable. After selecting the region, run the iTunes program, connect the gadget to the computer and follow all further prompts that will be displayed on the screen. Please note that at the same time your computer must have access to the Internet. The rest of the functions you can easily configure in the General Settings menu. If you want to restore data from the backup after executing the initial instructions of the setup assistant, connect the iPad to the computer with running iTunes. Click the Gadget icon in the program and select the "Overview" option, then "Restore iPad". After the iPad recovery procedure reboots and turns on. This means that now it is configured and ready to use with recovered files and settings.

If your device is already configured, you can reset the settings and install new with assistant. To do this, go to the "Settings" menu and select "Basic". Then click "Reset" and "Erase Content and Settings". Remember that this procedure will delete all the contents of the gadget, so you pre-create a backup file.

Remember that the guarantee on any Apple products begins from the moment of its activation. If you have seen when buying that the gadget is already activated and configured, then you have the right to apply to the seller.

Who would have thought that for such a simple, it would seem, tasks, as the first inclusion of the most popular tablet in the world, may require preliminary preparation? However, this is so. Save the time you spend on the inclusion of "Ipada" by reading this article.

In order to enable iPad at all, you can not do without a computer, laptop or desktop - no matter. The thing is that, no matter how you wanted it, but the iPad will never become a "flash drive", for whom you can freely pour programs through the USB port directly from the file manager. To communicate with a computer, be it Mac or PC, you will need the iTunes program, which is completely free (it would be different!) You can download from Apple.

the iPad will never be a "flash drive" on whom you can freely pour programs through the USB port directly from the file manager.

In exchange for the "inconvenience" caused with the iTunes program you get the following:

1. Navigation through the multimedia library, a sponged search.
2. Organization of the multimedia library, the creation of playlists, folders.
3. Editing Metadata Songs, such as "author", "composer", "Cover", etc.
4. Record and import compositions with CDs.
5. Playing music, movies, podcasts, multi-band equalizer, visualizer, mini-player mode.
6. Purchase multimedia on the Internet.
7. Synchronization with iPod, iPhone, iPad and Apple TV.

In general, not so bad ...

And if you, pulling out a new iPad from the box and pressing the power button, suddenly saw on the screen desktop with application icons, know - your iPad is already at least turned on and recorded.

Next, you will have to register the registration process in which there is one big "underwater stone": if you do not have a Visa or MasterCard credit card, then you cannot buy any programs in the AppStore store. However, there are many free applications, and there are companies that create games and applications, from time to time arrange "days of unheard of generosity", distributing their applications completely free. However, for downloading free applications you will need to register. This can be done without the presence of a credit card.

If you do not have a Visa or MasterCard credit card, you cannot buy any programs in the AppStore store.

1. For a start, go to iTunes in the iTunes Store section.

2. Next, carefully looking for any free app in the list of programs. They are usually marked with a button with FREE inscription.

3. Click on it, and then click on the inscription Install App.

You must have a login / registration window.

4. Click on "Create a new account" and "Next".

5. We accept the license agreement (where are you going?). Further fit your mailbox and password to a new Ecount in the AppStore. Interestingly, the system itself will make you create a difficult password that is not so easy to pick up. To do this, your password must meet the following requirements:

a) at least one capital letter;

b) at least one capital;

d) there should be no more than 3 repetitions of one symbol;

e) password length no less than 8 characters.

In order not to forget your superstall password, it is also proposed to create a liga to a response, with which you can always restore it. We refuse spam, removing a tick in the appropriate window, and press "Next" ...

6. Now the most important thing. A window will appear, where in the Credit Card Count you need to put a point near the word "none" or click on the button with such an inscription (it depends on the version of the iTunes program). If there is no such button or point, it means that you did something wrong.

Return to step 2 and do everything first.

7. Next, you need to fill all points in the questionnaire. Information can be written absolutely any, even fictional, but only if you register the escount of another country, Russian, German, American, or, for example, Japanese, then the postal address is worth specifying this. This address is easy to specify. By registering the Russian ecint (Belarus in the list of available countries was not yet), I personally entered the postal address of the program "What? Where? When?". If the Ecunt is American, you can enter the address of some cafe, restaurant or shop. It is easy to find online, search engine to help you.

Next should come confirmation to the email address you specified. If it does not come immediately, check the "Spam" folder in your mailbox. After the link from the letter, you activate the account and can easily use the iTunes Store and the App Store, downloading all free applications from there.

Finally, you will give you advice: registering Russian Ecunt or American, you can use the AppStore versions for these countries, for example, civilizations for iPad in the Russian App Store. In addition, it often happens that sales or free application distributions concern only one country. And in general, applications in the American AppStore for some reason are significantly more than in the same Russian. True, for some reason Russian applications in the American AppStore.

By registering Russian Ecunt or American, you can use the AppStore versions for these countries.

Therefore, it makes sense to register two accounts at once. You can do it like this ...

Suppose you did when registering the Russian Ecunt and you need to create an American (or vice versa, it does not matter, the procedure for this does not change).

1. We split from the ecount. To do this, in the upper right corner in iTunes click on triangles and in the drop-down list, select Sign Out.
2. We go to the bottom of the iTunes Store (the right lower corner) and see the flag icon of Russia. Click on him.
3. A bunch of different flags appear - we are looking for, for example, American.
4. We press "enter" in the upper right corner and begin the registration of the American Ecount, which does not differ in particular from the registration of any other. Now we have two ecount. For both, it is necessary that the following action is performed in iTunes. In the menu - Store -\u003e Authorize this computer, in the window that appears, enter the login and password and click the "Authorize" button. Now, after the authorization of the two credentials, you can download games and programs from two different App Store: Russian and American. In the information about the program (right-click on the program -\u003e information), you can find out under what account it is purchased.

If you just bought your new iPad, and you are going to set it up and make it work as quickly and efficiently as possible. With iCloud you can do it directly on the iPad, without a computer or cable connection. If you prefer an old approach, you can also configure your new iPad using iTunes on a Mac or Windows PC computer.

For most people, in most cases, I recommend ICloud, but I will conduct you through both methods, and one of them is described below.

How to set up your new iPad

If you enable your new iPad, you will be prompted by the lock screen, which simply says "iPad". Well, let's start.

Note: Both default options are checked for yourself. Do not rush, you should look at the choice and click one to check it before the button further appears, which will activate your iPad. It will be forced to provide more attention than often on the Internet or in applications.

1. Removing the screen.

2.Select your own language.IPad will show you the most common languages \u200b\u200bin the area where you bought it, but you can click arrows down To see all the options. Click on blue Button with arrow , to continue.

3.Select yours country or region. To the same, iPad will show you, the region where you bought your iPad, but you can click Show more…*in additional options . Click on blue ** button Next , to continue.

4. Select whether you want to enable or disable services Location. Location Location is working with GPS, cellular tower of triangulation, and Wi-Fi router has a scheme for determining the approximate location of your iPad. This function is used for TURN-BY-Turn navigation (for example, Navigon, game registration, social networks (for example, Facebook, Geo-Tagging and utilities such how to find your iPad, etc. If you do not have much need to globally turn it off, and you want to enable the placement services at this point. You can change your settings or selectively disable or Enable these services later, in the setup application (for example, turn off the geo tag camera application, but leave TomTom S Turn-BY-TURN navigation). Press the blue "Next" button , to continue.

5.Select your own Wi-Fi Network. Where if you are on 3G and LTE Wi-Fi, iPad will work anyway, because there may be a lot of data to move in your CAP data - not fun. Enter a network password and click on blue "Next" button , to continue.

6. Do you want to answer from Apple to activate your iPad. It may take a few minutes.

7. Select if you want to configure your iPad, recover from backup iCloud or recovery from iTunes backup to PC. Click on blue "Next" button , to continue.

How to configure your new iPad (net installation)

To configure your iPad, as a new one (mainly how to make the first or clean installation on your computer):

1. Select whether you want to get your Apple ID. or create Free Apple ID. If you are not sure what it is, and do not know if you have an account, it can be any of the following: ITunes Store account, Email Account, Apple Developer Account, or IMessage Accounts.

2.If you ever used Apple products or services or just want a new one, you can create an Apple identifier.

3. Will with yours Apple identifier To log in. Will your full email address as a username. Click on blue "Next" button , to continue. (If you change your mind, then you can exit iCloud, or you can enter the other account later.)

4. In the lower left corner, click on the blue button I agree from Conditions Services.

5. Approach your consent by clicking on the button. I agree.

6. Select if you want Setting up icloud.. If you are not sure, select to configure the icloud. The source service is free, and makes your iPad infinitely more convenient to use iCloud.

7. Select whether you want to use iCloud backup.icloud. Stores all your data, it reliably stores them and in the case of recovery, it will easily help go to a new or additional iOS device later.

8. Select if you want to use the service Find my iPad.. This service is also free, incredibly useful to track the iPad if you ever lose it or if you have it.

9. Select if you want to automatically send the report Diagnostics in Apple. This is an anonymous messages and help make Apple better products, but if you fear, select Do not send.

10. Wait, so far icloud-setup..

11.Cap Use iPad!

How to restore your new iPad BP backup with icloud

Keep your battery always charged, I always recommend installing your new iPad with a charged battery, as with a new one (see above). If you have an old iPad or other iOS devices, and you quickly need access to your old data, or if you have an idea to start from scratch again, you have the opportunity to just restore your new iPad from a backup of your old device.

1.Select restoration frombackup With iCloud.

2. Watch yours Apple identifier To log in. (Enter your full email address as username.) Click on blue "Next" button ,to continue. (If you change your mind, then you can exit iCloud, or log in under another account later.)

3. Approach - I agree with conditions services by clicking on the blue button I agreein the lower left corner.

4. Using your consent by clicking on the button I agree.

5. Select your backup. In the list you will see your last copy of backup And this is usually the one you want to choose. Also you will see old backups, if available, and if backup copies of other iOS devices are not available in the same ICloud account.

Progress bar will show you approximately how long it will download a backup. As you just will be done, the iPad will be rebooted. After your iPad will reboot, you will be prompted to re-enter all your passwords (as a safety measure, ICLOUD does not restore Passwords).

As soon as it is done, the iPad will start re-downloading all your applications. If iTunes is available in your country, it will also re-download iTunes music, movies, TV shows and iBooks. After that, it will restart, but all your settings will remain where you left them, and iTunes will start to download all applications that you have already installed when a backup has been made. You will need to stay connected via Wi-Fi for any file size 50 MB for reloading.

P.P.S. As always, if you have any questions, leave a comment in the form below, and I will try, as far as I can, to help you, than I can.

Apple iPad in our time is perhaps the most recognizable brand of tablets in the world.

For the first time in its history, Apple announced the two tablets at the same time. This happened in November 2012, from the release of the iPad3 also did not pass the year, although the model range even in large manufacturers it is customary to change at least one year. It is not known what led to such a hasty release, because the technical characteristics of the 3rd iPad significantly exceeded its competitors. Announcement passed so rapidly that in a few weeks not all iPad lovers were aware of the fact that Apple iPad 4 tablet as well as iPad mini is announced and sold.

Appearance

To avoid confusion, the new iPad began to call iPad 4, Apple called it as the 3rd - just NEW iPad, removing the number. If an externally, the tablet has not undergone serious changes, and reminds iPad 2, then the technical characteristics have changed quite seriously. The changes affected not only the updated connector on which all Apple models from the end of 2012, but also the processor, which became more productory, 4 nuclear graphics chip, etc. The delivery package includes: power supply, Lightning cable, user manual, and tablet itself.

Set

Technical data and design

Specification:

• Screen: 9.7 inches, resolution 2048x1536, IPS;
• Processor: Apple A6X with a frequency of up to 1.4 GHz (2 nuclear);
• OS: iOS 6.0.1;
• Graph. Processor: PowerVR SGX (4 kernels, 300 MHz frequency);
• Internal memory: 16/32/64 GB;
• RAM: 1 GB;
• NAVIGATION: GPS, GLONASS;
• Cameras: Frontal 1.2MP (video 720r), rear 5MP (1920x1080);
• Networks: optional 3G, Wi-Fi and 4G LTE (does not support Russian networks), Bluetooth 4.0;
• The battery is designed for 10 hours of operation without networks, and 9 hours of operation when Wi-Fi, 3G or 4G networks are enabled (11560 mAh);
• Extra. Devices: Built-in speaker, microphone, headphone connector, connector for docking station, gravitational module.

Specifications

The tablet was used by the new two Apple A6X nuclear processor at the 32-nm chip, with a clock frequency of 1.4 GHz, which increases the computational potential, important for resource games, which has recently been a large amount. The new graphic four nuclear processor is also gaming, and allows you to process better graphics, maintain resolution 2048x1536 (with 300 inch). RAM at the tablet standard number - 1 GB, which is quite enough to use all applications and new iron in full. The built-in memory at the tablet is 16-64 GB, the Apple iPad 4 32GB tablet is most often supplied to Russia. Unfortunately, the tablet does not support memory cards, which is a big minus.

The tablet has built-in support for Wi-Fi as well as Bluetooth 4.0, optionally you can choose support 3G and 4G. 4G does not support Russian telecom operators. The navigation corresponds to the built-in GPS module, which except GPS supports the GLONASS. Video Formats: MOV, ASF, MPEG-4, 3GP, 3G2, H.264, VC-1, WMV-9, MP4, RM, RMVB (there is AVPlayer for playback). Supported audio: APE, OGG, FLAC, WAV, RA, MP3, WMA. Text formats: PPF, FB2, DOC, XLS, TXT.

Design device

The design has practically not undergotable. The familiar all-metal aluminum alloy body, which has already become a visiting iPad card, Retina display, high definition with scratch-resistant and mechanical damage to the coating. Standard for iPad Vertical Display Positioning, with a touch button to return to the main menu.

Front view

The size of the tablet 241.2x185.7 mm, its thickness is 9.4 mm, and the weight is 662 g (without docking station). Assembly quality, squeaks and backlash. Occasionally come across tablets with bad assembly signs, this is a marriage, immediately require replacement. In general, the tablet completely repeats the design of the iPad 2, with the exception of the docking station connectivity, now it has become different and if you buy the 4th with the hands, then first of all you should pay attention to it.

1st device scheme

2nd device scheme

Installing a SIM card (optional)

To install and extract the SIM card, a tool is present to extract the SIM card, if it is not, or it is lost, you can use a dispersed stationery clip. In the iPad 4, the SIM card is installed by means of a tray.

In order to set the SIM card, insert the end of the device to remove the SIM card into the hole, which is located in the SIM card socket in the tablet. You must insert it and push it until the tray is popping. In the tray, install a SIM card and insert the tray back, and slightly press up to click.

Installing SIM

Remember that the SIM card should be installed when the tablet is turned off or after installation, restart the tablet. After switching on or rebooting, the system will automatically register at the cellular operator.

The SIM card is retrieved by the same manipulation.

Wireless networks

The tablet presents the built-in support module of two-channel Wi-Fi, as well as support for Bluetooth 4.0. Optionally, you can choose a tablet with support 3G.

Remember, if the network is not used, it is better to turn off, since the network enabled consumes a lot of energy and the battery sits faster.

Connect Wi-Fi

You can configure Wi-Fi on the tablet in several ways: manual configuration and configuration using the AirPort utility.

Manual Wi-Fi:

1. The settings window will open, where the left you want to find the Wi-Fi string.
2. The right window will open to configure Wi-Fi. In it, first of all, you need to enable the network using the switch (if the network is already adjusted, the tablet will automatically connect to the last used). To connect to the already used network, but for example, a password has changed there, click "Forget this Network" and re-configure the connection.
3. The tablet will automatically find affordable network.
4. If the network is protected by encoding, you will request a key (password).
5. If the connection is performed successfully, the connected network icon will appear on top.

Connection using Airport:

1. Install the AirPort utility from the App Store
2. Run "AIRPORT Setup Assistant"
3. Select "Settings"
4. Then "Wi-Fi"
5. In the "Configure the Airport Basic Network" section, click on the name of the station (basic) you want to configure (connecting to the existing network)
6. Follow the instructions of the program.

Bluetooth connection

Apple tablet 4 can establish a connection with Bluetooth devices, such as headphones, headset, kit for telephone conversations, etc.

Bluetooth to connect:

1. On the desktop (or in the program menu) find the "Settings" menu.
2. The settings window will open, where you need to find the Bluetooth string.
3. The right window will open to configure Bluetooth and search will be found available for connecting devices.
4. In the device list, select the desired device.
5. Next follow the instructions of the system.

Connect to 3G (optional)

To connect to the Internet, it is necessary that the SIM card is installed and is determined by the operator (in the menu the operator will be the name of the operator and the signal level indicator at the top of the display).

Then:

• On the desktop (or in the program menu) find the "Settings" menu.
• The settings window will open, where to the left you need to find the "Cell data" string.
• The right window will open to configure the SIM card and other things.
• Select "APN Settings".
• Enter the data in the field that contains the table below if there is no your operator, contact it and take the settings.