Badly hear the interlocutor iPhone 4. Do not hear the interlocutor iPhone

If you do not hear the interlocutor on the iPhone ("iPhone"), the first thing you think about, what to do. With a worsening of sound quality, crackling or interference can be heard. And below you will learn how to eliminate the problem yourself or find another more reliable way.

An auditory and polyphonic speaker are installed on "iPhones". The first is responsible for hearing during the conversation and sound quality. It is located at the top of the phone and is protected by a metal mesh. With any problems, it is necessary to replace it.

The main signs of problems with the speaker on the "iPhone":

Does not hear interlocutor iPhone During the conversation.
When talking, the sound is very distorted.
There are third-party interference and noises when talking.

Why does not hear the interlocutor on the iPhone ("Iphone"):

The mobile device was subjected to mechanical deformations, the phone hit, fell.
Moist's phone got into the phone (for example, he is a winking in the rain).
Careless handling of the device, which led to clogging the mesh dynamics of dust or garbage.
Using a smartphone as a player, including sound at maximum mode.

Whatever your situation, you should not beat the alarm, as you can try to perform a number of simple steps, trying to solve independently, or contact our Apple-Sapphire service center

Volume

If you do not hear the interlocutor on the iPhone, try adjusting it using the volume control buttons (located on the sidebar). Check that when they are pressed, the volume indicator appears on the screen, which changes its indicators. If, despite pressing, there is no indicator, it means that the buttons do not work.

Headset

If "iPhone" was connected sound headset, neither in one dynamic sound will not work. From here the following reason appears if the headphone contact is noted, the device can "think", that the headset is still connected to it, and automatically turn off the sound. This can be checked, and we suggest the following actions:

· Check that no headset is connected to the connector;

· Adjust the sound through the control buttons and look at the indication;

· If it is exactly the same as in the left side of another image, the reason is not in the connector;

· Otherwise, you can gently insert / pull out the headphones in order to properly shut down.

Protective mesh Dynamics

None of the manipulations make the dynamic of the device work if it is clogged or contaminated. If you have new phoneRemove the protective film. Otherwise, make sure that the speaker does not block anything (for example, a cover or film that comes into contact with it), then check whether the grid is clean. Perhaps it is she who misses the sound. When it is clogged, you need to take a soft brush and carefully clean the receiver.

If the interlocutor on the iPhone is not heard and the sound works badly, try to restart it. If the sound quality remains the same, but the interlocutor hears you - it is worth checking the performance of the microphone itself. It can be done very easily. You must record your voice and listen to the voice recorder. If it is a discontinuous, not clear or no question - contact our company, the masters of which quickly and efficiently replace the microphone.

Service center

If you all tried, but nothing helped to eliminate the problem, Apple-Sapphire is the last hope. Replacing the speakers by our masters takes less than an hour. We do not recommend that you do it with your own hands, because the actions of inexperienced users cause more important problems and, as a result, the cost of repair becomes higher.

The advantages of our company

Relying on your rich experience of diagnosis and repair mobile devicesWe allocate the following benefits of cooperation with us:

· Responsibility and 100% execution of owned obligations;

· Professional approach, ranging from diagnostics and ending with repair;

· The quality of the final result;

· The presence of the necessary equipment and instruments;

· warranty service.

Contact Apple-Sapphire, and your digital apple technique will work trouble free!

The phone is, first of all, the communication device, despite the set additional features. If via iPhone is poorly audible, such a malfunction is fraught with serious problems for the owner and his interlocutor. Heard can deteriorate or completely disappear for several reasons.

With some of them you can cope without the involvement of specialists, but most often you have to contact the service center. We define what reasons lead to the deterioration of hearingness, and we will tell you how to deal with them.

Reasons why when conversing an iPhone is badly audible

If through the iPhone is a badly audible interlocutor, first of all you need to check the phone settings. It is possible that the speaker volume is at a minimum. Despite the simplicity, the case is quite common.

Another reason is to clog the dynamics hole. If you wore a phone in your pocket without a cover, the hole could score dust or vile from clothes. Any contamination is cleaned with a soft brush, after that hearing can recover. The common cause of problems in the work of the phone is negligent appeal. If you follow the rules of operation, the repair will be required extremely rarely.

Sometimes problems with hearing are associated with violation of the headset. In this case, the gadget identifies the headphones, even if they are not connected, so the sound level will be reduced. When the interlocutor is poorly audible through the iPhone, insert the headphones, and then pull them out. The sound in the speakers can recover, but this indicates violations in the work of the phone, so it is still worth consulting specialists.

If via iPhone is heard and simple ways Do not help eliminate a malfunction, most likely you have to change the upper speaker. It is impossible to restore its performance: it is cast, and not a collapsible part, so it will not work out this item. The replacement will not take much time, and after it hearing will be excellent.

Why the iPhone 4 / 4S does not allow you to hear the interlocutor well?

There are several reasons resulting in a poorly audible interlocutor. First of all, the speaker should be noted here. He can or clog out, or fail due to moisture, coarse mechanical impact or due to damage to the board. A badly audible interlocutor may be due to the fact that the loop broke. Also bad audibility of the interlocutor is often connected with the failure of the modem.

What if iPhone 4 / 4S does not allow you to hear the interlocutor well?

If the speaker clogged, then clean it. If he broke, it will have to be replaced. In the case when the reason lies in the loop, then this element is replaced with a new one. It is not subject to repair. Wanting a risk, you can try to make such a replacement yourself. The modem can be repaired. But it will be necessary to conduct certain diagnostic measures. This will require specifically by.

Who can help?

If for some reason you could not solve this breakdown yourself or you simply do not have time and you want to solve everything as quickly as possible, then just contact us. This repairs will cost you from 1200 p. We can perform repairs on the board or replace the speaker. Our specialists have a considerable experience in business. repair iPhone. 4S, therefore will do everything at the highest level!

As it turned out, for the iPhone 4S problem with telephone conversations No less relevant than the problem with the firmware. The point here is that there are many factors affecting voice communication between subscribers, namely bad hearing, or in general, the failure to work the speakers may be caused mechanical damage, inhibition of moisture, incorrect firmware, various other errors.

The problem is often possible to solve yourself, without the costly repair of the iPhone 4S. Diagnose the problem will help you several recommendations. Pay attention to the Mute phone button on the side of the phone. Is there such? If it's not about it, then I apologize. First you need to check whether the speaker and the microphone work. To check the microphone and make sure it is possible only to record on the voice recorder. As for the dynamics, it is necessary to communicate through a speakerphone or headset. If you are not in order with one or another, it will be necessary to replace them, which is better to trust the masters. It may happen that the headset connector closed, then its use accurately diagnoses the problem. Bluetooth headset is also better to keep disconnected if she does not use it.

If this did not give the result, then the POWER button looped the loop. Then your voice is like a barrel, so, in any case, should hear the interlocutor. To get to the plume and try to detect a malfunction, you need to disassemble half alert. Here on your choice, do it yourself, or allow it to make professionals. To disassemble the iPhone 4S, you need at least free hours of hours, special tools, instructions and golden hands, so as not to carry your favorite device.

You can also try to reset the settings through dFU mode. This is done quite simple, you just need to save the data you need before reset, and download the desired version Firmware on PC. Detailed instructions About resetting settings in DFU is in the sections of the site. It rarely, but helps, which means the problem was in incorrect IOS work.

Where worse, if the iPhone 4S has fallen. In this case, most likely damaged the fee that requires replacement. It's certainly not to do. And you have to turn to the masters of Apple's technicians. I am glad that the choice is enjoyable here from tents in the markets and guys in a sporty to very decent service centers With a pretty good client service.

Began to notice that with some challenges on your iPhone, it becomes not heard of the interlocutor? This problem quite widespread among the owners apple smartphones. Its reason can be imprisoned iOS errorand in terms of malfunction, or the contamination of the iPhone receiver. What to do in any of these cases told in this instruction.

Check the volume and connection level

Initially need to check basic settings. First, make sure that the volume level during the conversation is not installed on minimum value. During the call, adjust the volume using the control buttons - the volume indicator and its current state should be displayed on the screen.

Secondly, make sure that the headset is not connected to the iPhone, since the sound in the smartphone receiver will be absent in this case. Check that nothing is connected to the headphone jack or dock connector, and not. In addition, go to the menu " Settings» → Bluetooth and turn off Bluetooth.

Clean the receiver

The iPhone receiver may not work properly if it is contaminated or clogged. Make sure the receiver is not locked, for example, protective film Or cover, and also check if the receiver grille is clogged. In the latter case, you must clean it with a clean dry brush with soft bristles.

Tip! If you just purchased the iPhone, remove the plastic films from the smartphone panels.

Perform a forced iPhone reboot

Quite often the problem with bad work The iPhone receiver is associated with a software error. Produce forced reboot smartphone holding the buttons Food and Home (Volume Reduction button on iPhone 7/7 Plus) in order to reset errors.

Restore iPhone

Even more in an effective way program error corrections is restore iPhone.. For this:

Note: You must be installed on your computer. version of iTunes.. You can update iTunes on Mac on the "Update" tab in Mac App Store., On Windows in the Help menu → "Updates". If iTunes is not installed on your computer, download last version can be the official website of Apple..

Step 1. Download the relevant for your iPhone iOS version on the this site. .

Step 2. Connect the iPhone to the computer, then enter your smartphone into recovery mode. To do this, simultaneously hold the buttons Home and Food on the 10 Seconds, then release the power button, but continue to hold the button Home during 6-9 seconds. If you did everything right, iTunes will report iphone detection in recovery mode.

Note: The translation of the iPhone 7 and iPhone 7 plus into recovery mode is somewhat different. Instead of the home button, you must hold the volume button to reduce.

Step 3. Hold down the key Shift. and holding it click " Restore»In iTunes. In the window that opens, select the previously downloaded firmware file.

Step 4. Confirm the beginning of the recovery procedure.

After the recovery end, follow the initial setting up iPhoneAnd after checking if the error does not improve with the wrong operation of the device receiver.

Contact your service center for help.

If none of the methods described above did not help, in your case the problem is a hardware. Only service center experts can be solved.