Restoring the iPhone, iPod Touch or iPad firmware in Windows. Self-flashing iPhone

Apple smartphones They are practically the standard of stability and reliability of hardware and software components among all released gadgets in the world. At the same time, during the operation of even such devices such as iPhone, various unforeseen failures can occur, which can only be eliminated by a complete reinstall operating system Device. The material below examines the firmware methods of one of the most popular Apple devices - iPhone 5S.

High security requirements for Apple to manufactured devices do not allow to apply for iPhone 5S firmware a large number of Methods and tools. In essence, the following instructions are a description of fairly simple official ways. installation IOS. In the devices of EPL. At the same time, flashing the apparatus under consideration by one of the following methods very often helps to eliminate all problems with it without a hike in service center.

All manipulations on the instructions from this article are carried out by the user for their own fear and risk! For obtaining the necessary results, the Administration of Responsibility is not responsible, as for damage to the device as a result of incorrect actions!

Before switching directly to reinstalling iOS on the iPhone 5S, it is important to conduct a certain preparation. If the following preparatory operations are performed carefully, the gadget firmware does not take much time and will pass without any problems.

iTunes.

Almost all manipulations with apple devices, iPhone 5S and its firmware here is no exception, are carried out using a multifunctional tool for interfacing manufacturer's devices from a PC and control of the functions of the latter.

This program is written quite a lot of material, including on our website. To get complete information about the facilities, you can contact the program dedicated to the program. In any case, before proceeding to the manipulation of reinstalling software on the smartphone, read:

As for the iPhone 5S firmware, you need to use the last version of iTunes.. Install the application by downloading the installer from the Apple official website or update the version of the already installed tool.

Backup copy

In the case of application for the iPhone 5S firmware of one of the methods described below, it should be understood that the data stored in the memory of the smartphone will be destroyed. To restore user information, you will need a backup. If your smartphone has been configured to synchronize with ICloud and iTunes, and / or a local backup of the device system on a PC disk was created, the restoration of all important is carried out very simply.

In the event that there are no backups, it follows before moving to reinstall iOS, create backupBy using the following instruction:

IOS update

In a situation where the purpose of flashing iPhone 5S is only updating the version of the operating system, and the smartphone itself is generally working normally, the use of cardinal methods for installing system software may not be required. Simple iOS update very often allows you to eliminate many problems that are concerned about Apple-device.

We try to improve the system version, performing steps one of the instructions set out in the material:

In addition to enhancing the version of the OS, often improve operation iphone 5S allows an update installed applications, Including those that work incorrectly.

Before switching to the installation of firmware in iPhone 5S, you must obtain a package containing components for installation. Firmware for installation in iPhone 5S - these are files * .IPSW. It should be borne in mind that it will be able to install only last version Apple released systems for use as a device operating system. The exceptions are the versions of the firmware preceding the newest, but they will be able to install them only within a few weeks after the official release of the latter. You can get the desired package in two ways.

Firmware process

By training and uploading the package with the firmware desired to install, you can move to direct manipulations with the device's memory. There are only two iPhone 5S firmware methods available to the usual user. Both assume use iTunes as a tool for installing OS and recovery.

Method 1: Recovery Mode

In the event that the iPhone 5S has lost its performance, that is, it does not start, it is restarted, in general, does not function properly and cannot be updated via OTA, an emergency recovery mode is applied to flashing - RecoveryMode..

Fully turn off the iPhone.

Run iTunes.

Click and hold on the iPhone 5S in the button off "HOME", We connect the cable to the smartphone, previously connected to the USB port of the computer. We observe the following on the machine screen:

We wait for the moment when iTunes will define the device. Here are two options:
Press key SHIFT On the keyboard and click on the button "Restore iPhone ...".

A conductor window opens in which you want to specify the path to the firmware. Note File * .IPSW., Press the button "Open".

A request will be received about the readiness of the user to the beginning of the firmware procedure. In the query window click "Restore".

The further process of the iPhone 5S firmware is made of iTunes in automatic mode. The user remains only to monitor the notifications of the processes and the indicator of the procedure.

After the firmware is completed, turn off the smartphone from the PC. Long pressing a key "Turning on" Fully turn off the device's nutrition. Then we start the iPhone with a short press of the same button.

Opporting iPhone 5S is completed. We carry out the initial setting, restore the data and use the device.

Method 2: DFU MODE

If the iPhone 5S firmware for any reason is impracticable in RecoveryMode, the most cardinal mode of iPhone memory is applied - Device Firmware Update Mode (DFU). Unlike RecoveryMode, in DFFA mode, reinstalling the iOS is really completely. The process is carried out bypassing system software already present in the device.

The process of installing an OS device in DFumode includes the steps presented:

Recording of the bootloader, and then it is launched;
Setting a set of additional components;
Memory recycling;
Overwriting system sections.

The method is used for recovery iPhone. 5S, which has lost their performance as a result of serious software failures and, if you want to overwrite the memory of the device completely. Moreover, this method Allows you to return to official firmware After Jeilbreak operation.

Thus, the firmware of one of the most popular and common Apple smartphones is carried out. As you can see, even in critical situations, the proper level of performance of the iPhone 5S is completely simple.

The software of any device becomes over time. This is a normal process, since any company continues to work on its own software, constantly improving it.

It is not an exception and firmware on "Inefon 4". The device itself can not be called too backward for its technical configuration - you can look stylish even today. Plus, the technical parameters of the model (camera, processor and other indicators) high enough so that the phone function normally.

Nevertheless, the operating system on which the device works is morally outdated - Apple has already released the 9th version of its version, while the 4th generation model was supplied with iOS 5. Of course, OS for these updates has become more productive, convenient and attractive externally. Therefore, some users do our best to bring their phone to the same state. Simply put, they will find out how to flash the phone "Iphone 4". However, the flashing may be needed not only for this.

In this article we will try to reveal as much as possible that this is the procedure and why it is needed.

Each smartphone works with a specific version of the operating system. The firmware procedure means its shift, which may include both the transition to a newer generation and simply updating existing to such a state, in which phone was released from the factory.

Perhaps someone will think that the firmware on the "iPhone 4" is the most complex process that can only be for the power of hackers or qualified employees of service centers, but it is not. In fact, this is a fairly simple action. And Apple has taken care that everyone can easily cope with it, almost at home.

Why is it needed?

As noted, one of the options for updating the software of your device may be desire to simply go to more new version Its OS. This is normal because, as we have already mentioned, it may be due to the expanded functionality.

So, in addition to this, the user can search for information about his "iPhone 4" (how to flash it independently) in order to reduce the model to factory settings. It may take this in case of finding someone else's phone or, let's say when the smartphone gave you a man previously used by him. Thus, you just want to erase all the information from the device, which refers to other users, and get an absolutely clean model.

Methods for the firmware "Inefon 4"

Well, whatever your desire to learn how to flash "iPhone 4" (S-modifications also concerns), we will describe this procedure in this article. There are two of all two - this is a "update" and "restoration". Both are conducted through a computer with a pre-installed iTunes program and a cord connecting the smartphone with a PC; Either directly on the device itself using a local WiFi connection.

Each of the two methods of how to reflash "iPhone 4S" (or simply 4) implies some individual features. Read about the differences between them further in the text, in the sections on these methods.

Restoration

First talk about recovery. You can contact it solely if you work according to the "Computer + iTunes + Phone" scheme. The Recovery tab can be found after your smartphone will be recognized by PC, after that the menu will appear on the monitor to control it.

The recovery procedure itself is more comprehensive than the update, since it implies the removal of personal data from the phone. She is aimed at how it has already been said above to get a "clean" mobile phone. Conduct it, for example, in the case of sending or selling "Iphona", as well as when the user is looking for how to flash the found "iPhone 4".

Save information

Describing this procedure, it is impossible not to mention that you need to be careful and save all your files in advance. It will be impossible to restore them after this step, all the information from your iPhone will be lost forever. Therefore, it is not recommended to restore the device without the need, as an experiment, as well as when it was not disturbed about creating a backup copy of all its files (especially photographs) on other media. As the user's reviews show, this is a fairly common problem and an error when a person confuses the process with a simple update and loses entire content.

Update

So, as you already guessed, this procedure does not include the removal of the user by the device, since it is aimed at just go to a more recent version of the operating system.

Instructions on how to carry out this operation depends on which update method selects the user - through the computer and iTunes or on WiFi, working with the phone itself. Those who are thinking how to flash "iPhone 4 S" may not worry. No complicity is not different, neither the first nor the second methods. Just all depends on the conditions in which the flashing will be conducted. It is access to the Internet, the availability of the operating system is already and, of course, the cord for connecting the smartphone (you should take care of availability).

Step-by-step instruction

If you write everything step by step, we have the following picture. If we need to restore the device, simply connect to the computer using the cable of our "iPhone 4" (how to flash it without access to the PC - we describe next).

Next, open the iTunes program, where you will see your phone's menu on the upper right side of the screen. You must click on it. You will open the phone status panel on which the Restore and Update keys will be located, the names of which it becomes obvious, for which they are intended.

If you are unhappy with the work of your "iPhone 4", how to flash it - the question is published. Performing this operation using a PC, remember the ability to specify the program to the previously downloaded version of iOS and that the software can independently search for more than fresh build. If such is really available, iTunes will offer to establish it. And remember that the answer to the question is, it is possible to flash "iPhone 4", negative, if you wanted to return to the previous OS. Device developers took care that you cannot choose again more old version operating system. It delivers the inconvenience to users who have passed on the IOS 8 generations, which note that it works incorrectly, hangs and periodically slows down. This was not observed on older versions of the OS.

After all, you just need to wait. Download and installation process new system It will be displayed on the phone screen, so the user at that time can just go drink coffee, for example. Actually, it does not require anything from him during this process - the phone holds all actions on their own.

Via wifi or on a computer?

By comparing these two procedures, we only note that the device will swigulate the device will be longer. Loading on the PC is faster. It depends on the WiFi module installed on "iPhone 4", (how to flash the latter, we have already described in the instructions). Its transfer rate is less than a full-fledged computer. However, in some situations, when there is no access to the PC and it is necessary to carry out the firmware, it helps. So choose the way, based on what you have at hand.

Cautions

That's how "iPhone 4" works. How to flash it, you have already understood. Now let's talk about some cavetens. The first is addressed to the owners of non-original devices. If you are looking for how to flash the Chinese "iPhone 4", then you are mistaken by the address. Most often fake smartphones (in particular, copies iPhone 4) Work on (and in some cases - generally without that). Accordingly, the entire procedure described in this article is not applicable to them. Most likely, the developers who produced a copy did not take care of how to make updates, so the owners of such phones were not lucky.

Another comment should be done to those who are looking for how to reflash "iPhone 4S", which was "unlocked" (or "jailbreak"). If your phone has been unlocked from any operator (for example, AT & T, Verizon or Sprint), then, by checking the operating system, you are most likely to lose this "jailbreak". To reset all phone settings to factory, you can use special programsFor example, Semirestore. However, it is not necessary to resort to the procedures described here.

On this occasion, there are many different instructions and guidelines. They describe that work with such programs is usually quite simple - you need to connect a device with a computer, run on it such a software and wait until the removal of all information is passed. Upon completion, you will also get pure iPhone 4, however, "Jailbreak" should remain on it - and this is the main thing.

Why pay more?

As you can see, the iphone 4 flashing procedure is quite simple even for an inexperienced user. Any person will easily cope with it, the minimally owning PC, since all actions are reduced to elementary.

This makes visiting the service center for the purpose of complete removal data from the phone is meaningless. Each of us knows how to reflash "iPhone 4S", update your iOS to the most recent version, reset all the settings and are not particularly distracted from your affairs. So, asks, why pay more?

If you flash the iPhone, remember that when the firmware version is enhanced, the modem version also rises. In most cases, this increase is irreversible! There is nothing wrong with that, if you do not need anlok, however, if you have a locked iPhone, you can for a long time or permanently lose the opportunity to call. To enhance firmware on locked iPhone, you will need to use.

This instruction It is valid only for topical firmware that are signed by Apple servers.
Find out which IOS versions are relevant, you can on pages with information on the relevant firmware or in our.
For irregular versions of iOS should be applied.

Download from our latest version of iTunes and install it (if you have not done it yet).
Download from our firmware you need.
Connect your gadget to the computer. Hold the Power (on top of the top) and Home (on the front panel) exactly for 10 seconds, then release POWER, continuing to hold home about 8-10 seconds. Itunes starts and will show the following message:
Click "OK".
If you synchronize your gadget with iTunes, do it before flashing by clicking the "Synchronize" button. If you create a backup in ICloud, go to the "ICloud Storage and Backup" menu in the device settings. Remember that when recovery, unlike updating, the device's memory format is full, and you can only restore the content if you have a backup!
Click the SHIFT button on the keyboard, then click on the "Restore" button. Specify the path to the downloaded iOS file.
Wait for the end of the firmware and load the gadget in normal mode.

How to fix the error 3194 when flashing

Before flashing, iTunes can give an error 3194. This error has several reasons, but most often the line is to blame in the Hosts file, which could stay after you launched the utility like Tinyumbrella. If you encounter it, follow the steps described below.
Find the Notepad program label (for example, in the "Start" menu), in its context menu Select "Run from the administrator."
In the Notepad window, go to the "File-Open" menu.
Go to the folder "C: \\ Windows \\ System32 \\ Drivers \\ etc". Below in the drop-down list, select "All Files", then you will see the HOSTS file. Open the file.
Scroll through the contents hosts file. If you see a row in which "gs.apple.com" will be contained, it is necessary to remove it entirely ..
Close Notepad. On the Save File Answer Application Offer. Then reboot ..
Try to flash again, there are great chances that the error 3194 will no longer appear.

How to fix errors 1013, 1014 or 1015 when flashing

In addition, when decreasing the firmware on the iPhone or iPad with cellular modem iTunes with a large share of the probability will give an error from the range of 1013-1015 in the middle of the flashing. This is due to the inability to lower the modem. To upload the device in normal mode after such an error, follow the instructions below.
Download the latest REDSN0W version for Windows.
Unpack the archive, place RedSn0W on your desktop.
In the context menu of the redsn0w.exe file, select PU

The happy owner of the iPhone sooner or later may encounter a situation when the device refuses to work as before. The reasons for this "behavior" can be the most different. However, in this situation, it is more important for the owner. It is more important not to understand that it provoked a failure of normal functioning, but to deal with what to do how to return your iPhone to "life."

Of course, one of the most effective ways is a visit to the service center. This will require time to spend time and a certain amount of money that will require a master for the service provided.

However, exist alternative wayaccompanied by the same efficiency. To do this, you simply take the instructions how to reflash the iPhone 5S yourself, read it, find the answers to the questions that arise and that's it.

By the way, find answers are easy if you have access to the Internet. There are many specialized sites on the network, where detailed recommendations have already been laid out how to reflash iPhone, and there are forums where everyone is directly owner of the iPhone. It may formulate your question and instantly get the answer.

After such preparation, you yourself will be able to carry out actions not worse than the service center masters, you can easily flash your iPhone and return it excellent performance.

It is important to take into account that you can flash the iPhone in two ways:

by updating software;

These two ways have distinctive features, so before the final choice of a particular way, how to flash chinese iphoneIt is advisable to get acquainted with the process of performing each method to realize what option will be as acceptable as possible.

If your iPhone stopped functioning correctly because of the software failure, you can use the ability to update the software.

Before that, do not forget to make a backup, as well as transfer important content with the iPhone to the computer. This will avoid the loss of important data after the update process is completed.

Refresh software On the iPhone can also be in two ways with:

iTunes;
Wi-Fi.

Only you, the owner, decide how to flash an iPhone, how to use.

Update using iTunes

The iTunes utility allows and updating the software, and if necessary, restore the operating system.

It is important to only take into account that the utility is focused on downloading and installing only the latest version of the operating system.

For this reason, if you have the desire to establish a specific version that is not the last, it is better to download it in advance to the computer, and then during the installation process, specify the path where it is saved.

In this case, your Chinese iPhone will be able to flash a certain version of IOS.

So, initially connect your Chinese iPhone to a computer using a USB cable. After that, run the iTunes utility.

In the window that opens in the menu bar, locate the "Device" parameter, go to it and select the model of your device.

Now go to the settings of the connection and synchronization settings, there you will find the "Update" button, click on it.

Immediately after that, a request will appear on your iPhone regarding these actions. Click on "OK", agreeing with the proposed actions, thereby allowing the start of the update process.

You remains to wait for it to complete, make sure that the performance is correct, and then move the entire content, previously rewritten to the computer.

Update via Wi-Fi

If it is possible to ensure an iPhone connection to the high-speed Internet via Wi-Fi, you can download the operating system directly immediately to the gadget, and then safely update the software.

Turn on your Chinese iPhone, go to "Settings", follow in the "Basic" parameter, and from it - to "Update by".

Opening this option, it is easy to detect the "Download and Install" button, it is for you to use it now.

After such actions, you can confirm your intention to reflash your gadget, then the process will be automatically implemented.

You also remain just waiting for the completion of the process.

Unfortunately, so simple and effective method It is impossible to use if you are wanted mobile device Or that which uses jailbreak.

Other option, how to use the operating system recovery in DFU mode, there is no such iPhone.

Restoring the operating system

The update and recovery processes are a bit similar, but, nevertheless, have distinctive features. If when upgraded, it is meant to install the latest version of the operating system, then the "clean" iOS is installed during recovery, but not necessarily new.

So, if you decide to reflash your Chinese iPhone, you will also have to choose between two embodiments of such actions:

via recoverymode;
through DFU MODE.

The first rightfully consider the emergency option to restore the operating system, and the second is a more appropriate option for those who are a jailbreak lover.

Recovery via RecoveryMode.

So, wanting to figure out how to flash the iPhone through recoverymode, the owners of the gadget also usefully carefully examine the instructions, although there are no difficulties in the implementation of such actions.

Initially, turn off your device and look out when the display turns out completely.

Now connect your gadget to the computer and clamp the "Home" button. In this case, the iTunes utility will offer to implement the process of restoring your gadget. Of course, you must agree with this proposal by clicking the "OK" button.

In some cases, the iTunes utility does not push such a sentence, so you have to find the "Restore iPhone" button and click on it, and you must simultaneously hold the SHIFT key.

If there is no Windows on the computer, but Mac, then instead of the SHIFT key, you need to hold the "ALT" key.

For each iphone version It is suitable for a firmware version, having an extension. PSW. It is very important to carefully examine the proposed firmware versions, stop the choice only when you will be absolutely sure that it is suitable for your device. If the firmware is selected "alien", the result of the recovery will be negative. The firmware will simply won't be on someone else's model.

All subsequent actions are carried out automatically, without requiring your additional participation. It remains just waiting for the completion of this process.

When the process comes to completion, the utility will report this, so you can safely disconnect your gadget from the computer, include it and check its performance.

You also need to not forget to move that content that was pre-moved to the computer. One of the following actions will be those that are aimed at downloading and installing utilities and programs necessary to fulfill all your usual tasks.

Recovery through DFU MODE

If you decide to reflash your gadget via DFU MODE, it is also recommended to study the instructions, and then strictly follow according to its recommendations.

Initially, connect your iPhone to the computer and only turn it off after that.

Now find two buttons "POWER", "HOME" on the device and simultaneously hold them. Hold the pause of ten seconds, after which release the "POWER" button, but the finger on the "Home" button continue to hold confidently.

As a result of such actions, the iTunes utility will be able to recognize your gadget in DFU mode mode.

All subsequent actions will be identical to those in the firmware in RecoveryMode mode.

The owner necessarily indicates the path to the firmware, which he previously downloaded and retained on the hard disk. After that, agrees with all subsequent actions, blessed the firmware process carried out in automatic mode.

It also remains only to wait patiently when the utility will announce the successful completion of the process and allow you to make sure that the new operating system will now be installed in excellent performance.

Those owners who are actively nostalgic on a certain version of iOS will not be able to use such options, unfortunately, will not be able to roll back to the old version of the operating system it is better to use other options.

So, the process of flashing modern gadgets is not complicated and confusing, so if you wish, any user can easily implement it, even having any experience.

Do not panic and rapidly rush to the service center, in confidence that only their masters will be able to reanimate your favorite gadget, restore its performance. With all the same actions, it is possible to cope and independently, while ensuring the preservation of the budget.

The iPhones are now very reliable smartphones, as Apple makes a big focus on their quality, but it's still a technique and like any technique whether it is a computer, or a TV touch it tend to break. All these problems with the smartphone put you before choosing, attribute your smartphone to the service center, where you can contemplate a round sum or try to fix it yourself. This instruction is general and suitable for all iPhone models.

Let's deal with what the iPhone firmware is needed:

In the case of software failure.
If you need to establish the current version of the OS.
In the case when you forgot your password (not to be confused with the activation lock of the APLLE ID).
To create a clean system after changing the Device owner.

In this case, you can make very simple actions in order to restore your device to a working state, for this you do not need a programmer's knowledge is very simple. One of the simple ways to restore the iPhone is to reflash it, for this we will need a computer and iTunes. By the way, the same actions are made in the service center.

Before starting the process, do not forget to make Backup (backup) Your data music, photos, contacts and other important informationBecause after the iPhone firmware all the information will be completely removed.

Preparation in the firmware iPhone

Download the desired version Firmware with extension .IPSW.. For each models iPhone. Different versions.

You can see the version of your iPhone very easily, in the firmware files (4S, 5S, 6S, 7, etc.), you usually indicate a set of letters and numbers that can be seen on the back cover of iPhone, for example: Model A1332.

There is a small problem of choosing the firmware, and it consists in what exists GSM. and CDMA models that work in different networks cellular communication. Therefore, you need to choose a suitable model. Firmware for GSM. Not installed on CDMA.

After you have identified your model Download yourself on a PC firmware that is suitable for your gadget, here's the site where you can -

Important!!! Apple company It does not allow to reduce the version of the OS, however, there is a temporary window interval in a few weeks after the exit official update iOS during which users will be available previous version OS.

As an important feature is the ability to return to the last official version of iOS. With beta version installed on the device.

To begin with, you will need to go to the settings and disable the function Find iPhone Without this, you will not be able to flash your device, as iTunes will give an error. Download the latest version on the official website.

Firmware iPhone in action

There are two ways to flash an iPhone, through Recovery Mode. and Dfu Mode.. RCOVERY MODE., This is an emergency recovery mode. Designed to recover after the smartphone stopped working as usual.

DFumode. - carries out actions by way of OS iPhone and makes the firmware directly through Firmware.. Also this method is recommended to owners who Jailbreak.

IPhone Firmware via RecoveryMode

Turn off the phone and wait for the screen and holding the button Home Connect it to the PC. The computer recognizes a smartphone in recovery mode.

We run iTunes and wait when the program determines the iPhone you can get out such a window, click OK.

If iTunes does not react to click on the smartphone icon in the iTunes program and looking for item Restore iPhone Click on it holding the Shift key (for Windows OS) for Mac while holding Alt. Also in this menu there is such a function as an iPhone update:

File Manager appears before you, looking for our firmware and click Open. Next, iTunes will do everything yourself, waiting for the end of the download. After the download is completed, disconnect an iPhone from a PC and long press the button Power Turn off your smartphone. Then quickly press the button Power Turn on iPhone. That's all the iPhone is ready to use.

IPhone firmware via DFU Mode

We connect the smartphone to the PC and turn it off, then clinging the power and home buttons hold 15 seconds. Let's release the button Power Continuing to hold HOME until iTunes identifies the device in mode DFu..

Choose your device in iTunes.
In the control menu, we find the restore iPhone
Click on this item while holding down the SHIFT key (for Windows) or Alt for Mac
In the window that opens, select the file with the firmware open it.
We are waiting for the completion of the firmware process.
Turn on the device and usefully use.

This method is suitable for those who have Jailbreak whether anyone does not work out an iPhone through Recovery Mode..