Manual cleaning of the Registry of Windows 7. How to fully clear the system registry

When the computer is working, especially if it is connected to the Internet, every garbage is accumulated, which slows down the system, is the cause of failures, errors. In order for the operating system to work smoothly, it is necessary to monitor its purity. To perform this work there are many useful programs and utilities. Of all those offered in the article "Claimers", it is enough to choose the two most effective, comfortable and working with them all the time.

Enjoys well-deserved the CCleaner program. With her, you can easily clean the registry. This program performs its work even better than standard Windows tools is suitable for inexperienced users. All default settings can not be changed. Choose the section "Registry" and "Cleaning" sections. This program is a real "wizard" of Windows from any "garbage". Removes tracks from remote programs not used registry keys before deleting creates a copy of them.

Another small and quite old, but the effective regseeker program is the Windows Adjuster and Cleaner. Installation is not required, run.exe file. If you figure it out in its settings, you not only delete the programs, but also clean the registry. For every unforeseen case, you will create a backup copy of the registry, if necessary, it is not difficult to restore it. But the program works very stable. Select the Registry Cleanup tab, click "Go!". The process went and remains to remove the selected items.

A very useful utility for safe cleaning system registry is Wise Registry Cleaner. The program works on checking the 17 registry sections, writes a report on each section and divides all the errors found "dangerous" and "safe", has three levels of verification levels, the deepest level is for experienced, "normal" default is configured. By error, remote items can be restored by performing system rollback. The program is configured to work in automatic mode, at the end of the cleaning performed the registry defragment.

The Advanced SystemCare program is a powerful tool for cleaning the system, registry, disk, still optimizes the operation of the computer. Installing the program is easy, there is a built-in tutorial. The "Care" tab clears the registry from errors, performs optimization. The "toolbar" performs the registry defragmentation, is looking for empty folders and so on. Turbo Acceleration Tab allows you to configure computer optimization. It requires careful reading, be careful, look carefully, that you turn off. Vit Registry Fix is \u200b\u200bthe following powerful tool for cleaning the registry from unnecessary, outdated data and errors. Automatic mode scans the registry and removes more than 50 varieties of errors. Can delete shortcuts that do not associate programs, creates backup copies of the registry and shortcuts before cleaning, corrects damage to the registry files. Multifunctional, easy to use, safe software. Click the Scan button when the process is completed, select "Show Reso" and "Delete".

If the operating system began to slow down and is sometimes unknown, which makes, but it works slowly, you can clean the registry manually without special means. True, it is better to perform such a cleaning of the registry better than experienced users. We decided to make the registry cleansing yourself, start: Start-all program-standard menu. In the window string, type Regedit, press the ENTER key. The registry will open. In the My Computer folder, open the HKEY_CURRENT_USER document, then follow the Software. Remove traces of past programs. Now also clean the HKEY_LOCAL_MACHINE - Software. After that restart the computer.

Periodically, you should delete temporary files (Temp, Cookies, Temporary Internet Files), remote software remnants, registry cleaner. After performing these works, you will not only increase the speed of the computer, as well as the mass of free disk space. All the programs described are distributed free of charge on the site developers, Russified, easy to use.

With the need to clear the registry of its operating system, each user who often uses a lot of PCs is facing. The main reason for cleaning is a fire failure, which happens due to the heels of unnecessary programs, in an amount with viruses that are not always able to detect even antivirus programs.

The registry is a database in which there is everything Windows needs to be known to carry out successful work with files, applications, all utilities and the like.

Without a request to this database (database) no application costs, as the data is saved here, for example: the free use of the demo version of the application.

What causes the registry litter?

Most often, this category includes: long-used files, even those you deleted, often leave their trace, temporary files, the need for already lost, all sorts of system data, errors in the registry and all this develops in the "head" of the computer, Without giving it clearly thinking. It becomes clear from all this that, with more columns and tables, it is harder to find the right one, both to a person and a computer.

Sometimes to establish the work of certain programs or games, you also need to enter the archive and make the necessary actions. A very frequent problem relating to the registry is a failure in recognizing file extensions.

If you fail to work with S.EXE files, you cannot run any programs or applications, you need to download and install the file, links to which on the network is full.

The easiest way to get into this storage -\u003e Press Windows + R -\u003e In the opened line, enter the regedit - this is a direct path to the brain of your computer. As you may have guessed, it is not recommended to touch such a subtle tool with inexperienced users to avoid unnecessary problems.

Often, to perform simple user requirements, just download a special program. There is in reality a lot of programs with the necessary functionality, but many little known or have a slow system analysis rate. The most popular and proven time are the Auslogics Registry Cleaner and CCleaner. Before performing the most important actions, these programs will definitely offer you to make backup copies of deleted or changing data.

The main functionality of these applications is:

1. The search for garbage and its subsequent removal;
2. Troubleshooting in the register and errors of reading / recognition of files;
3. The installing and deleting of programms;
4. Search for duplicate files / applications.

Cleaning the registry CCleaner

CCleaner is an extremely convenient program with very useful functionality. We have already told in one of the articles about what is. Today we will talk about how to clean the registry of Windows 10 and other versions using this program.

1. Go to the developer's website and free download and install this program;

3. In the Registry tab, you will see a list of partitions of your registry, in which the application should be signed by faults. The default is all selected, we advise you to change anything if there is no special need, then click the "Problems" button;

4. After checking (usually does not take much time), you will be a window with a list of all problems. Click the Fit button and save the backup of the files to reinsure;

5. Since you have already saved all the files, in the backup archive, you can safely click "Fix marked", that's all your registry is clean.

Cleaning the registry using the AUSLOGICS Registry Cleaner Program

How to install Auslogics Registry Cleaner?

1. Download the Auslogics Registry Cleaner application from the official site https://www.auslogics.com/ru/Software/Free/;

2. Install and then run the program;

3. As you already guessed, you need to click on the "Scan Now" button;

4. After a short wait for scanning your system, you will see what the program considers a state of a particular sector;

5. Press the REPAIR button that the utility would start performing your work, that's all your registry is clean.

We will not consider other programs, as they all work according to one principle, the difference in design will not be a hindrance for you if you select another application.

After cleaning the registry, you can notice, not even armed with a look, a significant acceleration of the Windows system, because we all remember how quickly the PC works immediately after installing the new system, and if not, you can remember how it was. Such procedures can be performed at least at each system loading or once a week to solve you. However, it is not very long to postpone the execution of cleaning, because the computer is something, without which it is difficult to do.

If you have questions about "How to Clear Windows 7 Registry? Detailed instructions, "you can ask them in the comments

if (Function_exists ("The_ratings")) (The_ratings ();)?\u003e

Almost all actions performed by the user are recorded in the registry (Windows database). With long-term maintenance of the PC, the database size increases, it creates a lot of garbage entries and errors occur. To optimize, speed up the performance of the computer, the maintenance of the Windows 7, 8, 10 registry is required.

Most likely, you do not feel the strong increase in performance, but the optimization will not be unnecessary, although it all depends on the degree of launching. In addition, I recommend to perform yet. Standard OS funds do not provide for the ability to clean the Windows registry, so consider special programs and manually cleaning method.

Registry cleaning programs

There are many applications that cleanse the registry, but there are those that do not fulfill their functions or can harm the computer. Damage to important registry sections is accompanied by Windows errors or leads to non-OS start, because of which you have to use the system recovery tool. Reliable programs that perform stated tasks include:

1. CCleaner
2. Comodo System Utilities
3. Windows Cleaner
4. Wise Registry Cleaner

For example, consider the Windows registry cleansing the application at number 1. Download and install CCleaner. Run Ccleaner, go to the "Registry" section. By default, all the elements are labeled, I recommend that you leave. Press the "Problems" button, wait until the process is completed, then click the "Fix" button.

In the message that appears, click "Yes," this will allow you to make a backup copy of the registry just in case. Specify the reference folder of the REG file and its name, click "Save". In order not to eliminate the problems on one, click "correct marked" and wait until the end of the process.

Close the application window. In the program, in addition to actions, clean the Windows registry, you can make the system cleaning as a whole and use the services to optimize the OS. Perform the process once a month or more often.

Manual cleaning registry

If you do not trust the programs, then you can clean the registry manually. It will take the process more time, and it will not be possible to correct all errors. The process is to remove the remaining records of software from the registry, and clean the autoload.

Note: The instruction is designed for experienced users. Damage to the registry may be accompanied by critical problems and errors.

Create a system recovery point or backup described further. Make, 8, 10. Click File, then Export.

Select the range "All Registry". Specify the name (Latin Letters) and the storage folder, click "Save". If unwanted problems arise, you can restore the previous state with REG file.

On the left side of the registry is the tree structure of the partitions. Open section HKEY_CURRENT_USER, then Software subsection. Software stored data on the established (once remote) software. Now look for the name of the programs you removed. Right-click on the deleted section, select "Delete" in the menu, click "Yes."

Now press the Ctrl + F combination to call the search string. Write the name of the program, set the parameters, as in the screenshot. Click "Find Next", wait for the search. If you have found related registry sections with the search for phrase, remove them. Next Press F3 to find the following result, manually delete all links and repeat the process.

Tip: Install the truly necessary programs. If you are going to remove the applications, then read it. With the right removal, adequate applications are running on their traces in your registry.

Here's how to clean the registry of Windows 7, 8, 10. The use of programs listed in the recommendations will be much more relevant than manual cleaning. The programs will save a bunch of time, carefully fulfill the task.

Want to know how to make a consistent on the Internet from 500 rubles a day?
Download my free book
=>>

Periodically, each PC user using Windows can face such a situation where the system begins to malfunctions, reflect and create other problems. Of course, in this case, it seems that the best option is to reinstall it.

However, there is another way to solve this issue - you can clean the OS registry. Immediately make a reservation, the registry cleaner can be performed in two ways using such programs as CCleaner or Advanced System Care and manually.

The last method requires certain skills and knowledge. In addition, it is applied quite rarely, but sometimes, this option can help with their solution. This article will be discussed exactly how to clean the registry on Windows 7 by hand, alone.

Before you begin to clean the registry, you should make a copy of the files that you can not lose. After all, there is always the likelihood that something can go wrong. Only after this manipulation, you can proceed to the registry cleaner.

The next step is to search the registry itself. To get into it, you need to call the system window, to search for a search by climbing the "Win + R" keys simultaneously.

In the appeared window, you need to dial the word "regedit" in Latin letters, only without quotes and click on the "OK" button.

You will appear "Registry Editor". It is in this system window that all necessary to clean the registry operation will be held.

Immediately I warn you, in the "Registry Editor" everything will be written in English, but it is not scary. A copy of the data in this system window is as follows:

1. First you need to click on the file. It is in the upper left corner.
2. Choose "Export".
3. Next, choose the "whole registry" and save the data. This is useful in the case if something goes wrong and will need to restore the registry.

You can then place the created copy to the PC desktop and load them on the USB flash drive or disk. I want to warn that the folders will wear the names recorded by Latin. I think it is necessary to immediately clarify that the on the right will be displayed separate elements of the folders, and on the left of the folder.

Clean registry

After logging into the registry and save all the data required, it is worth starting with the removal of programs that have the status of "remote programs". This is a rather complicated procedure, since it will be necessary to remember everything that was installed on the PC.

To start cleaning "remote programs", you need to click on the folder with the name "HKEY_CURRENT_USER". From the opened list, select the "Software" string.

You must reveal a large list of all programs that have ever been installed on the PC. From the list you need to highlight all folders to be deleted, click for this action to the "Delete" key.

This is how the "remote programs" is deleted from the list.

Also searching programs that need to be removed from the registry can be made according to their name. Press the keys simultaneously on the keyboard "Ctrl + F". In the window that appears, enter the name of the application and delete it.

The final stage

At the final stage, it is worthwhile to do the list of autoloading OS. To do this, you will need to open the folder with the name "HKEY_LOCAL_MACHINE". From the list you need to select the "SoftWare" folder.

After that, find and open each other with the Line "Microsoft", "Windows", "CurrentVersion". Next, go to the "RUN" folder and delete all files.

After that, go to the folder "HKEY_CURRENT_USER" and choose "Software".

It also discloses the "Microsoft", "Windows", "CurrentVersion" and, moving to "Run" each other, delete all files from it again.

After carrying out all manipulations, you need to restart the PC. Thus, the places on the hard disk will become more, which is also an important point for the normal operation of the computer.

How to clean the registry on windows 7 manually, result

As you can see if the question is, how to clean the registry on Windows 7 manually, it is not so difficult, as it may seem at first glance, only takes a large amount of time.

When working with the registry, you need to be careful and delete only those files that really consider unnecessary. Also for these purposes, you can use special programs that can help significantly save time or, if necessary, seek help from specialists.

The performance of the computer depends on the Windows registry - database, which contains information about the configuration of the system, as well as the settings for installed programs. Long-term work leads to the accumulation of the so-called "garbage": links to the labels of remote applications, incorrect extensions for files and so on.

There are two options for how to clean the registry in Windows 7/8/10. If you are an experienced computer user, then you can clean manually clean. However, if there is no time to get acquainted with all registry parameters, there are many free programs on the Internet. These applications are able to automatically find and cope errors, delete unnecessary files and records.

Special programs

Software cleaning allows you to save user time. Also special applications help exclude the appearance of errors in the registry due to user incompetence.

Below in the article describes the special utilities that have proven themselves as the best solutions when cleaning the registry.

1. CCleaner

This program has a variety of functions, among which there is a correction of problems in the registry. The popularity of the application is caused by the fact that it applies for free and is great for non-commercial use.

The developers took care of unforeseen situations that may arise during the work. Therefore, before the start of the cleaning process, the program proposes to create a recovery point for the entire system. The presence of continuous monitoring of the system allows you to correct the errors automatically.

Consider a sequence of actions to clean the registry in Windows 7 using the CCleaner utility.

1. Download CCleaner on the official website, and then install it.
2. Run the application using the appropriate label on the desktop.
3. Go to the tab "Registry".
4. Select the necessary items where errors will be executed (all ticks are displayed by default).
5. Start your error search by pressing the corresponding button.
6. Click "Fix ..." To remove incorrect keys.
7. Make a backup to eliminate emergency errors.
8. Change the registry, deleting the value program offered and sections.

2. REG ORGANIZER

REG ORGANIZER - a multifunctional solution for correcting Windows system performance. The program offers both manual and automatic cleaning method.

The license to use all available features is $ 10. The free version of the program only finds, but does not correct the registry errors. The following is an actions algorithm for changing the registry.

1. Open the full software version.
2. Select "Cleaning registry ».
3. Press the button "To begin" In the window that appears, if you do not know for sure which individual sections should be checked.
4. Wait for the end of the system check, after which you will be presented with a list of all problems found.
5. Press the button "Fix"If you are ready to proceed to the process.

3. Windows Cleaner

The program is free, well suited as an alternative option to automatically clean the registry from the system trash. It is also possible to configure the autoloading system and creating backup recovery points. The application only works under Windows OS.

To solve problems, complete these steps:

1. Open the program before installing it on your computer.
2. Go to the tab "Registry" in the window "Cleaning".
3. Select the necessary items to check from the list.
4. Spend the analysis by pressing "Analysis" .
5. Press the button "Cleaning" To get rid of the problems found.

Manually

If you are ready to take responsibility, and try to perform cleaning yourself, below shows the list of necessary steps.

1. Run the built-in registry editor system. To do this, open the window "Run" on the menu "Start".
2. Enter "REGEDIT" In the window that appears, and press "ENTER" or the button "OK".
3. Make a backup before start making changes. To do this, go to the "Export" menu in the tab "File". Specify what you want to keep the entire registry. Select a location where the exported file will be, and click the button. "Save".
4. Go to the "For All Users" section, the entries could remain in the Local Machine section, otherwise in the Current User section.
5. Close the editor after completing all the necessary actions.

Important! Perform manual cleaning should be performed only when you are completely confident in your competence and knowledge in this area.