Symbol diameter on the keyboard. Various ways to insert diameter icon in Windows Applications

In cases where you want to specify the size of the diameter, use a sign in the form of a circle with the line "Ø". This symbol is applied before the dimensional number.

Examples of using a diameter sign:

Diameter signs on the details of rotation of the cylindrical and conical shape

Dimensions applied with a lack of space
on dimensional line

Designation of sizes with a lack of space
For arrows

Diameter - This is a length of a straight line connecting the circle surface. The segment of the diameter, in any case runs only through the center of the circle. Indicate it usually the Latin letter "D" or "Ø" sign. If the radius of the circle is multiplied by two, the amount will be diameter. All volumetric bodies having a spherical shape, as well as those, at least one of the possible sections of which constitute a circle, are denoted by diameter symbols. Word " diameter"It happened from the Greek word" diametros."- diameter.

An example of the designation of four holes
indicating diameter

On technical drawings, diameters are designated as a symbol in the form of a crossed circle "Ø". This sign is placed in front of the dimensional numbers of parts that can be both cylindrical and conical.

In the cross section, the cone is a rectangular triangle, one of the cathets of which is parallel or pine sprout. Its parameters have the following notation: "D" - a larger diameter, "D" - a smaller diameter, "L" - length. In the drawing, the diameters of the cone are indicated by the numbers that are set by the signs "Ø" and numeric value are long without alphabetic designations.

The most common details with cylindrical surfaces include shafts of various purposes. Cylindrical bodies formed by the rotation of the rectangle about one of its sides are denoted by a diameter. Smooth shafts have some constructive features, and are divided into varieties: straight, step-one-sided, stepped bilateral and heavy. For example, the shafts of asynchronous engines in which the rotor matches with the shaft by pressing the highest diameter, and on both sides there are steps under bearings, fans, and pulleys. Bilateral step shafts can also be found in various mechanisms where they are required, any other design features. Cylindrical parts, as a rule, have a total maximum length and outer diameter. Depending on the specific configuration of a particular product, it may include such elements as internal and outer grooves, steps, pumps, etc. with different diameters before the values \u200b\u200bof which are "Ø" signs.

Example of diameter sign
on a spherical surface

The details with conical surfaces include instrumental transition bushings, in which the outer and inner surface of the conical. Such sleeves provide high accuracy of centering and the speed of the tool change with sufficient rigidity when using them on machines. Transition sleeves are short and long.

The conical instrumental details of this type are called " morse cone"And divide numbers. Corners, lengths and diameters of transition sleeves can be taken from special tables. In tabular data, letter notation is used such as "D" smaller diameter, "D" large diameter, "L" detail length. In drawings, diameters and length are denoted by digital values, and in front of the diameter numbers the "Ø" sign is set.

« Morse cone"- In addition to transient bushings, it is used in the manufacture of shanks of spiral rolling, end mills, fixtures and mandrels. Instrumental cones are fixed due to elastic and plastic deformation. To implement such compounds in the spindles of milling and lathes, conical holes are provided for the installation of auxiliary tool. In addition, the lathe of the backstroke pinol has the same conical hole.

The technique uses a large number of parts and their elements to designate the diameter sign. For standard diameters sizes, a parametric series is used, which includes standard dimensions. When developing technical products, the calculated diameters are rounded to their nearest values. With the designation on the technical drawings, the diameter sign must be accompanied by the designation of the axis of the barcchpunctive line, which indicates the round cross section of the part of the part.

How to insert into the word word signs
diameter, stress, quotes or apostrophe ...

Table Word Symbols

The selection of a character from the table is a classic way to insert symbolic characters in the Word text: Install the cursor to the desired text place, open the "Insert" Word Menu tab, click successively, as in Figure: "Symbols", "symbol", "other characters". The "Symbol Table" appears, in which you need to click (click) using the desired symbol and click the "Paste" button. The selected symbol will appear in the word Word document. To view the entire Word symbol table - use the side slider.

Selection and inserting characters from the table is a simple, but time-consuming procedure. Word text editor symbols table with all Beliborda, in which it is simply unthinkable to quickly find the desired icon.

Mr. Unicode allows you to insert printed and unprints and symbols from the keyboard. Symbol codes in Unicode (key combinations) support almost all text editors, starting with a non-type and ending with photoshop. In the Word Symbol Table, the code of the selected symbol is displayed in a special window (6), see Fig.

Vastimo, from the words "key set" - half of the inhabitants of the Internet flows into the trans. However, if a person is more than five years old, and he already knows the letters and numbers - there is nothing complicated. Moreover, on the contrary - there is a quiet buzz from wild savings of time. Codes of frequently used characters can be written to the leaf and stupidly trampled "Claud", by going into the details of all menus.

To insert the desired sign or symbol - we set the cursor to the desired place of the text, clamp (davim, wept, we do not release) the "ALT" key and, in the digital part of the "Claves" - we sequentially type the symbol code. Let's release the "Alt" key - the desired character will immediately appear in the text.

Codes of some popular characters:

• "English Double Quotes": 0147 and 0148
• 'English single quotes': 0145 and 0146
  (Right English single quotation
  used in Ukrainian as an apostrophe:
  locking, Susiir, bur'yan)
• "Russian quotes (Christmas tree)": 0171 and 0187
• "Quotes-foot": 0132 and 0147
• - Simple dash: 0150
• - Long dash: 0151

The wider picture of the example of using the keypads when the symbol is introduced, provides a Word symbol table in Unicode:

Example of using the table:
alt + 1 \u003d ☺; alt + 2 \u003d ☻; Alt + 3 \u003d; Alt + 4 \u003d ♦; Alt + 5 \u003d ♣;
Alt + 6 \u003d ♠; Alt + 7 \u003d.; Alt + 8 \u003d ◘; alt + 9 \u003d ○; Alt + 10 \u003d ◙; etc.

Left are tens, and from above - units. To insert a character - set the cursor to the text, clamp the "ALT" key and, without releasing it - the code of the symbol. After that, let's release the "alt" key, and the desired icon will appear in the text string.

Attention! Symbol code set to perform exclusively in the right digital keyboard. At the same time, it must be enabled (activated)!

Find and enable (activate)

right digital keyboard

Right digital keyboard - right digital keyboard key on a regular computer keyboard. These keys are assigned functions inaccessible to the upper digital keyboard, in particular - entering the digital code. By default, the right digital keyboard is inactive. To activate the digital block, use the "NUM LOCK" key. Each re-pressing "NUM LOCK", alternately, activates / deactivates (turns on / off) the right digital keys. In laptops (especially in netbooks), the right digital block is often absent. The numeric keys, or combine with the main keyboard, or the function of entering digital codes carry other keys on the main unit. The "Num Lock" activating key, on the laptops, can also not be.
However, the right digital keyboard cannot completely disappear from the computer device. It is simply hiding and deactivated for the convenience of the user. The surest way to learn how to enable and activate the functions of the right digital block - ask the manufacturer.

Otherwise, call "on-screen keyboard", which is always everywhere and in all. The on-screen keyboard is approximately true: "Start / (Service, Standard) menu / Special features / on-screen keyboard".

The on-screen keyboard usually displays the actual state of the real keyboard. On the on-screen keyboard may not be the right digital block and the "NUM LOCK" key. Not scary. Press the "Parameters" key on the on-screen keyboard (see Figure at the top). A dialog box opens where you want to put a check box to turn on the digital keyboard. Click "OK" - the digital block will appear on the screen. Click "Num Lock" - the keyboard is activated.

Insert accent

A stagnation sign in Word text is inserted with a separate ass:

• Install the cursor after the desired letter
• We type (Print) Symbol Code: 0300 or 0301 (Tilt Left / Right).
  The digits of the code will appear directly in the text.
  Do not touch, do not remove the cursor.
• Cleash "Alt" and, for the factory - "x"
  (in the Russian layout - "h")
• A stress icon appears above our beak.

At the moment, the stagnation sign supports only Word. In the remaining text editors, you can insert a sign of the stress by copying it ready made from the word Word. In NotePad, a copied sign, strokes - not saved to the file ...
Use NotePad ++ ...

Diameter sign in word

At the moment, Word does not support the sign of the diameter sign, as well as all other text editors. Instead of a classic diameter sign (crushed circle), it is universally proposed to use the good old crushed zero: Ø Ø . Visually, practically not distinguishable, and programmers - for one headache less. They are (programmers), and crushed zero something invented, exclusively to distinguish the cyphyrich 0 (Nolik) from the beak ABOUT. And then this terrible diameter sign (crossed circle), completely indistinguishable from the crushed zero. For the sim, the diameter sign went into the summer. The only way to insert into the word Word is a real diameter sign (crossed circle) - copy it from old documents when this icon was supported by a text editor. Download: Word.zip (Dropping: 116) To copy the diameter sign. As for the crushed zero, it is entered by a set of keys, type: "Alt" + 0248 (Lower register - ø ), "Alt" + 0216 (top register - Ø ). You need to recruit hot glavies, without fail in the English keyboard layout. Otherwise there will be a letter Sh !!!

When typing in MS Word, there is a need to insert special characters, such as: diameter icon, alpha letter, copywriting icon, etc. For their insertion there are special combinations and the usual insert, the means of Word.

To go to the Special Symbols section in MS Word, go to the navigation menu - Insert - the symbol - other characters (to see the entire list of special characters).

Select from the list any special character and click insert. Also, so as not to enter constantly into special characters, for each of them there is a key combination that can be seen when the symbol is selected.

In order to use the keyboard shortcuts, clamp the ALT key and press the first combination of 0176 and release ALT, the degree icon will appear in the document. The main condition of the number should be pressed on the small keyboard on the right, both on the laptop and on the keyboard of a stationary computer.

Consider in detail the combination of keys for the most popular special characters.

How to put a long dash in the Word?

Keyboard shortcut Alt + 0151 - Tire Sign

How to put a degree icon in the Word?

Keyboard Key Alt + 0176 ° Degree Sign

How to put a paragraph icon in the Word?

Keyboard shortcut Alt + 0167 § Paragraph

How to put an emphasis in the Word?

Keyboard keys Alt + 769

How to put the icon plus minus in the Word?

Keyboard keys Alt + 0177 ± plus / minus

How to put a diameter icon in the Word?

Keyboard keys Alt + 0216 Ø diameter

How to put the euro icon in the Word?

Keyboard Key Alt + 0136 € Euro

How to put the TM icon?

Keyboard keys Alt + 0153 ™ Brand brand icon

How to put a copywriting icon?

Keyboard shortcut Alt + 0169 Copyright

The remaining key combinations, see below the character you selected. All key combinations, operate on the entire Internet and in any text line.

In a text editor MS Word, there is a fairly large set of special characters, which, unfortunately, knows not all users of this program. That is why when it comes to add one or another symbol, a sign or designation, many of them do not know how to do it. One of these characters is the designation of the diameter, which, as you know, is not on the keyboard.

All special characters in Word are in the tab. "Insert", in a group "Symbols"to which we need to seek help.

1. Install the cursor in the place of the text where you need to add a diameter icon.

2. Go to the tab "Insert" and click there in the group "Symbols" On button "Symbol".

3. In a small window, which will unfold after clicking, select the last item - "Other characters".

4. The window opens "Symbol"in which we have to find the designation of the diameter.

5. In the section "Set" Select "Augmented Latin-1".

6. Click on the diameter icon and click "Paste".

7. The special character you choose will appear in the document in the place you specified.

Adding a "diameter" sign using a special code

All characters that are in the "Special Symbols" section of Microsoft Word programs have its own code designation. If you know this code, you can add the necessary symbol into the text much faster. You can see this code in the Symbol window, in its bottom, after clicking on the symbol that you need.

So, to add the "diameter" sign using the code, do the following:

1. Install the cursor in the place where you need to add a symbol.

2. Enter the combination in English layout "00D8" without quotes.

3. Without moving the cursor pointer from the installed place, press the keys. "ALT + X".

4. Diameter sign will be added.

That's all, now you know how to insert the diameter icon into the Word. Using a set of special characters available in the program, you can also add to the text and other necessary signs. We wish you success in further studying this advanced program to work with documents.

Not all characters are placed on the keyboard. None on it and diameter icon. But this does not mean that it cannot be inserted into most modern applications. There is such an opportunity. Moreover, this operation can be made in completely different ways. The most versatile among them is the use of ASCII codes. The second method is tied to the Microsoft office package and only works in it. The latter method is associated with for its implementation, you need the original diameter icon, which is then added to the new application by copying and insert. Each method will be considered in detail under this article.

When does such a need arise?

There are many cases in which there is a need to insert the "Ø" sign in for example, it may be needed when drawing drawings, registration of price-sheets, creating advertising bouquets or explanatory notes on pipe products or shut-off valves. This list can be continued further, but it is so clear that, although not so often, but
insert the diameter icon in the electronic document.

Using codes

The most versatile method is based on the use of ASCII codes. It is implemented by the possibilities of the Windows operating system itself, so it is not attached to some one, strictly defined annex. First you need to remember the special code - "0216", which in the ASCII codes table corresponds to "Ø". And the order of input in this case is the following:

• We replace the input language until "EN" appears ("English"). If this is not done, instead of "Ø" will be introduced "sh".
• Next, turn on the digital enhanced keyboard. It will signal the "NUM LOCK" LED. If it is burning, then nothing needs to be done.
• Then go to the workspace of our application if it is minimized. To do this, it is enough to click on it on the taskbar. Then we bring the manipulator pointer to its workspace and make one click left-click. At the same time, it loaned the cursor in it.
• At the next stage, clamp the "Alt" key (without any difference, from which side, you can both on the left and right). Then, without releasing it, in series on the right numeric keypad type "0-2-1-6". Fully remove the hands from and after that the diameter icon should appear.

The main advantage of this method is universality. It works in most modern programs. At the same time there is no need to search for the original character. The minus such a solution is that the code needs to be remembered. If only one icon is required, there are no problems. Worse, if there are several of them. In this case, it is better to print on a sheet of paper table codes of the most frequently used characters and periodically apply it.

Word and other office applications

Alternative method of input "Ø" is tied to a specific group of software products. This Microsoft office package, which includes Word, Exel and other applications. We introduce the diameter icon in the "Word" as an example. In other cases, the order of entry is similar. In the process of work, go to the toolbar called "Insert". It is located the top of the screen between the "Home" bookmarks and the page markup. We move to this inscription and make a single press on the left button. Then, in the right side of the screen, we find the "Symbols" subpipel. On it, select the "Symbol" item and in the list that opens, select "Other Symbols". All these manipulations are running right mouse.

The insert window opens. In it we find the "Ø" we need by scrolling characters. This can be done using a special wheel or repeatedly pressing the left button of the manipulator on the right. When they found "Ø", highlight it with a single click of the left button of the manipulator and press the "Paste" button (located in the bottom right side of the window). Then close the window. After that, the diameter icon in Word should appear (in its workspace). The minus of this method is that it works only in one group of applications. Therefore, it will not work everywhere.

Clipboard

Another method of insertion "Ø" is based on using the clipboard and combine the "Copy" operations and "insert". First you need to find somewhere this symbol. For example, you can insert the diameter icon in the "Word" in accordance with the procedure previously outlined. Then we allocate it and copy it (you can use the CTRL key combination + "C"). Then go to another application and use the insert operation ("Ctrl" + "V"). A minus such a decision is that the original symbol is needed. And it is not always available.

Finally

The diameter icon on the keyboard is missing. But it is possible to introduce it in one of the three proposed ways. The simplest and most universal of them is based on the use of so-called ASCII codes. It is not tied to one application and works in almost all operating system programs.