Installing Windows for this disc is not possible. Selected disk have GPT sections style

Windows 10 is an operating system for long times. Microsoft stated that there will be no new versions (in the usual understanding), and the development of the system will go permanent updates. Many Windows users want to be on the wave of progress, because they go to the newest and progressive operating system in the world. But wishing to upgrade is waiting for many pitfalls, especially for two-year-old output computers: ranging from the incompatibility of motherboards and components and ending with the lack of support for some processors. As a result, the installation attempt is completed by an error or the process "hangs".

Installing Windows 10 via the Internet

Microsoft considers the most logical way to install Windows 10 updating the current version of the system via the Internet (in this way you can upgrade with Windows 7 and 8), for which you can download the GET Windows 10 application from the company, which will make all the work yourself, and in the background: Upload the necessary components, installs drivers, save user data.

Many experienced users prefer the Clean Install - installation from the interchangeable media - to fully control the situation. The best carrier for such an installation is the loading flash drive with the image of the distribution of the operating system. The problem is that the OS funds format the flash drive as a disk with the MBR section. On computers with UEFI (i.e., most modern) installation of a system from such a flash drive will be completed with an error, and the installer will not see the file partition.

If you do not want to encounter an error, prepare the GPT boot disk. A program that will make it quickly and free - RUFUS.

Video: Creating a bootable flash drive in the RUFUS program

The disk contains the MBR partition table

When loading in UEFI mode, the Windows 10 installation program will not be able to install the system to a disk with the MBR sections. Such a situation is possible if the Windows 7 operating system has already been installed on the disk or below. As a result, a warning is displayed and the installation is suspended.

To continue the installation, you need to convert the disk to the GPT format. There are two ways to solve this problem: fast - with the loss of all data on the disk, and slow, with the preservation of information. If the information you do not need or is it just a disk from the secondary market, the first method will be optimal:

1. After receiving the warning of the MBR sections on the disk, press SHIFT + F10: This will open the command line window.
2. Sequentially enter the following commands:
   • diskpart;
   • list DISK - the program will display a list of disks;
   • sELECT DISK N - selection of the converted drive;
   • clean - delete all sections;
   • convert GPT - disk conversion to GPT format;
   • exit.
3. Close the window and click the "Update" button in the selection selection screen.
4. Select Unintegrate disk space to install and continue: an error will no longer appear.

To implement the second method - disk conversion with data saving, it will take a software package to work with the disk partitions. Let us dwell on the Minitool Partition Wizard program: it is free, and from the manufacturer's site you can download the image of the loading flash drive.

Messages about the inability to install the system to disk with the MBR sections can be avoided by switching the load mode to Legacy in the BIOS settings. But this is a temporary solution, which will then lead to a reduction in speed and reliability of the system. The optimal option will still convert the disk.

Windows 10 is not installed on a solid-state disk (SSD)

When installing Windows 10, you can encounter such errors as "infinite installation": at a certain stage, the computer reboots and starts the installation again. Also occurs such a trouble as a critical low access speed to SSD - the installation can last 12-15 hours. In addition, sometimes the installation program does not recognize the disk and SSD is not displayed in the disk selection window. To get rid of such errors, a number of simple steps should be taken:

1. Download from the official website of the manufacturer's motherboard or laptop, the latest version of the BIOS and install it according to the instructions.
2. In the BIOS settings, be sure to turn on the download type - UEFI.
3. On the peripheral configuration screen, select the SATA - AHCI controller.
4. If in addition to SSD, there are still internal drives. Disconnect them before starting the installation, disconnecting cables from the motherboard.
5. When the setting starts, you should delete any partitions on the SSD on the disk selection screen if they are present there. Make the installation of the system into an unbalanced area, allowing the installation program to create and format the section automatically.

   To install the system, select an unbalanced area

Video: Installing Windows 10 on SSD

Blue screen when installing Windows 10

Blue screen, it is also Blue Screen of Death (BSOD) - Windows diagnostic message on a critical error, the operation of the system after which is not possible. Errors may occur both when installing the operating system and in its further work.

Most often, such errors appear in the hardware of the computer.To get rid of the error, you can take the following steps:

1. If the motherboard BIOS includes the options for overclocking the processor and RAM - disable them.
2. Check the amount of installed RAM. If several slats are installed, try before starting the installer to leave only one of them. This will translate the memory controller into one-channel mode - slow, but resistant to errors.
3. Disconnect all peripheral devices other than those required at the installation phase.
4. Make sure that the Distribution Distribution of the OS and the CPU bit on your computer coincide. When trying to install a 64-bit OS on a 32-bit processor, the installation will end the error. Check the digitization of the processor can be free CPU-Z utility.
5. Remove the hard disk and install Windows 10 on another computer with which the error does not occur. After the installation is completed, return the disk back and try to boot as usual.

Black Screen when installing Windows 10

One of the common problems is a black screen (with a mouse cursor or without) after installing the operating system. Error This most often appears on computers with AMD and NVIDIA discrete video cards, this does not happen to the integrated video. A variant is possible that the computer sets uploaded updates: in this case, you should wait 15-20 minutes until the greeting screen appears. If the wait has not led to a positive result, you should restart the computer, and then disable the function of quickly launching the system (this is guaranteed eliminates the black-screen problem with AMD or NVIDIA video cards).

Windows 10 is installed for too long

Consider a separate error group due to which the installation of Windows 10 passes too long. In normal mode, on the average computer, the complete installation of the system takes no more than 35-40 minutes, on the system with SSD - 3-4 times faster.

When installing Windows 10 hangs on the logo

This problem is most often found when trying to install Windows 10 for one of the laptops of Samsung. Some time ago, the firm stopped the production of laptops, stopped purchasing the OEM version of the operating system. Therefore, Microsoft removed the support of these laptops from the distribution. As a result, the installation program hangs on the system logo, that is, at the very beginning.

You can install the operating system by dismantling the hard disk that connects to another computer, where the operating system is installed. Then the disk returns back to the laptop and after the automatic configuration phase, Windows 10 works perfectly on it.

Windows 10 hangs on preparing files for installation

This error occurs when updating Windows 7 or Windows 8 using the Windows Update Center. The progress of the installation can be highlighted at an arbitrary place and not to increase indefinitely. In this case, the optimal option will be the installation of the operating system from the bootable media (flash drive). On the starting screen, you can select the installation mode - "Update", - and all your data and installed in the previous version of the OS software will be saved.

Windows 10 setting stopped 0%

This problem occurs when you try to upgrade to Windows 10 from previous versions of OS. The update center error does not allow you to install a new system, when you try, you get a message "Some problems arose with installing updates ..."

To make the installation of Windows 10 possible, you need to run a special script that will reset all the "Windows Update Center" errors.

1. Create a "Notepad" file and register the following commands in it (without a semicolon):
   
2. Save the file named winupdate-reset.bat.
3. Click on the PCM file icon (right mouse button) and start it on the administrator.
4. Close the script window and restart the computer.

Now you can re-run the update to Windows 10 - errors will not.

Windows installation is interrupted with a 25% error

By 25%, installing Windows 10 may hang with an error code 0xC1900101.

The error indicates a conflict of peripheral devices and installation programs. Although Microsoft does not give any official instructions for its elimination, it is possible to achieve a normal system setting, having done the following steps:

1. When installing Windows 10, use a flash drive. Installing and updating from the operating system or from an optical disk increases the risk of Error 0xC1900101.
2. Disconnect all peripheral devices, leaving only the keyboard and mouse.
3. Disconnect all SATA and Ata drives, in addition to which the system is installed.

Installation hangs by 32 or 99%

If the installation hangs after 32%, this is a feature of the system update mechanism, and not an error. The amount of data to be downloaded from the Internet, about 10 gigabytes, and the number of files is calculated tens of thousands. Depending on the speed of the Internet connection of the central processor and the operational memory volume of the updated computer, the installation procedure of Windows 10 may occupy for a long time. Sometimes the process can continue for almost a day.

When updating there are several "checkpoints", when the process is passed, the process slows down so much that it seems that the update program "hung". You can only wait in such cases as:

• on the black screen with a blue circle in the range of 30-39%, when the Windows Update System downloads all dynamic updates for Windows 10 from the network;
• at 96-99% when Windows is back up with user data;
• while the message remains on the screen, "it will take a little longer than usual, but it will be ready soon."

You can significantly speed up the update process by disconnecting all the peripherals with the USB interface, as well as additional monitors, if available.

Video: How to install Windows 10 if the installation "hung up" by 99%

When installing Windows 10 does not create sections

This error occurs when you try to install the OS to a disk with the already created partition table. There is no unintended areas on the disk, the installation program cannot create additional hidden partitions for system needs and gives an error message "Failed to create a new one or find an existing section."

In order for the installation program to create the system partitions you need to work, you should either delete existing partitions from the disk (while all data will be lost), or the program for working with sections to reduce those that are on the disk. Thus, approximately 700 MB of space will be released and the installation will become possible.

In the first case, select the cursor an existing partition, without leaving the disk selection window, and click Delete. Then, in the same way, select the released free space and specify it for further installation of the operating system.

In the second case, you will need a boot flash drive with the MiniTool Partition Wizard program.

Installing Windows 10 reboots by 64%

An error occurs after installing the KB3081424 cumulative update (or the use of the installation disk, where this update is already integrated). The installation program scans the system registry and, if it finds the records of non-existent users in it, accidentally completes work, after which the update is trying to install again - and so indefinitely. To correct the error, you need to make edits to the system registry:

1. Restarting the computer in safe mode (hold the F8 key when you start), run the registry editor via the command line interface.
2. Go to HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Windows NT \\ CurrentVersion \\.
3. Delete the PROFILELIST key.
4. Restart the computer and continue the installation or update of the system.

Windows 10 installation window does not appear

A very rare error that meets and when installing other Windows family systems. Appears on configurations in which a drive of flexible magnetic disks is present. Solving the problem - Using the BIOS settings, turn off the drive and in the Drive A (B) line to display the Disabled value.

Drivers devices not found

During the installation process, the installer reports the absence of drivers for the drive and stops. It is impossible to continue at the same time.

The reason is the port of the USB 3.0 standard to which you have a boot flash drive with a system distribution or a portable hard disk. Fix the error is very simple - switch the drive to another USB port 2.0 standard. It is very easy to distinguish it: USB 3.0 standard ports - blue, and a 2.0 black standard.

Errors in installing Windows 10 - Official Manuals

Microsoft has published at least two articles on eliminating errors when installing Windows 10 or update to it with older OS. These are detailed guides with error codes and a brief description. This is "Help for updating and installing Windows 10" and "Troubleshooting Upgrading to Windows 10". You can find them in the "Documents" section.

Please note that you can access the Microsoft Knowledge Bases, including the articles mentioned, if there is a Microsoft account. If it is not - do not be lazy to spend 15 minutes on registration.

Errors and solutions discussed in the article - typical, that is, arising on the most different configurations. At the same time, "floating" errors can occur with unpredictable frequency, track and systematize which is very difficult. The stability of the OS work and the lack of problems with its installation are closely related to the quality of components from which the computer is collected. Use the RAM modules for proven brands, hard disks without errors and damage and reliable cooling system. After all, it is much easier to prevent mistakes than to fight them in the process of work.

In order to start working on a computer, you need to immediately install the operating system on it. The algorithm for the installation of modern OS is relatively simple and intuitive. At the same time, this does not guarantee a complete lack of a situation where for various reasons it is not possible to successfully complete the procedure. Let's see why problems arise with installing Windows 7 on the PC, and what methods of their solutions exist.

There are several groups of reasons, due to which complications may occur with the installation of Windows 7.

• Problems on the side of the installer;
• Computer hardware or incompatibility;
• Incorrect BIOS settings.

The problems on the side of the installer may be either in the carrier malfunction (broken flash drive or scratched disc), or in the loss of integrity (non-relidence) of the distribution. In this case, you just need to change the carrier or distribution to the working option. The remaining two groups of reasons we will look more in more detail.

Cause 1: Incorrect BIOS Settings

One of the most common reasons why Windows 7 cannot be installed is incorrectly configured BIOS. In particular, a lot of problems arise due to the fact that the user does not know how to specify the desired installation device or does not understand the need for this procedure.

Cause 2: Computer hardware or incompatibility

Another group of causes of problems with installing Windows 7 is hardware. For example, the hardware features of that computer to which you want to install the OS may not meet the minimum requirements of this system. Therefore, be sure to check the information from Microsoft at the necessary facilities with the actual PC parameters. The main minimum indicators should be:

• Processor frequency - 1 GHz;
• The amount of RAM is 1 GB (for 64-bit systems - 2 GB);
• The size of the free space on the hard drive is 16 GB (for 64-bit systems - 20 GB).

Failure with the installation is sometimes associated with a malfunction of component PCs. For example, it may be non-working drive or a USB connector. In these cases, it is impossible to install the system, respectively, from a disk or flash drive. Even the starting window of the installer will not be launched. If you do not want to bother with solving this problem, try simply change the type of device to another option (from a CD to a USB drive or vice versa) using the corresponding installation device. For the same users who wish to resolve the issue, a group of lessons, located in the list below, is proposed.

If the installation window starts and you are sure that the PC meets the minimum requirements for installing the operating system, but the installation procedure still does not reach the end, there is a probability of a hard disk fault. Then it makes sense to check the hard drive on errors. This can be done directly using the installation disk.

The failure of the installation procedure of the Windows 7 operating system on the PC can be caused by various groups of factors: Problems with a source OS, hardware problems, incorrect BIOS settings. The main thing is to correctly determine the cause of the failure and on the basis of this to act in the instructions that are presented in this article.

I can not install Windows 7! Inexperienced users are often faced with such a problem and in search of her solutions climb on the Internet.

And this is right, because our material will really help you get rid of a number of possible problems.

For the simplicity of determining the "culprit" of problems with the installation, grouped these objects into several generalized categories:

• installation image - OS installation files;
• set of installation image - CD, DVD or USB Flash drive;
• the image of the image media reading;
• Computer BIOS on which OS is installed;
• hard drive computer;
• computer equipment;
• peripherals of the computer.

If an error occurs, you must alternately check groups, narrowing the range of finding a faulty category, causes of malfunction and method of solving the problem.

Currently, reinstalling the operating system is more often made using USB Flash than from a DVD.

This installation requires the preparation of both the carrier and the special components of the BOIS computer.

The preparation of the flash drive is to turn on it the boot setting image. For this, programs will be useful: Ultraiso, WinsetupFromusB, etc.

Often errors when installing from flash drives are associated with incorrect deployment of the image.

Case 1. If you cannot install Windows 7 from a flash drive

• check the performance of the flash drive - we connect to the working computer, try to copy-write multiple files. Perform a test check by regular means (click of the right mouse - properties - service - perform check);
• we try to download the computer from the flash drive by inserting it into the rear connectors. From front USB connectors, long wires are drawn, in which there may be interference that distort the data readable from the media.
  Characteristic characteristic problem: installation is interrupted by an error in an unpredictable moment throughout the process.
• we check whether it is determined. By connecting a flash drive to a computer, we enter the interface. Its name should appear among other hard drives.
  If this does not happen, then you need to use another flash drive. The flash drive is determined normally, then we try to prepare it with other programs, use other installation images.

Case 2. If it is impossible to install Windows 7 via BIOS

In this case, we act in the same sequence as when problems with a flash drive: whether the carrier is working correctly, the reader works correctly, whether the image deployed on the carrier is operational.

If the problem is related to the fact that you can not get into the BIOS settings window, then we try to set the boot device when the computer is turned on using the function keys.

As a rule, the "Selecting device" function is activated by the F8, F11, F12 or ESC using the selection menu.

It is important not to skip the moment and click the button immediately after turning on the computer.

This feature can also be used to check the fact of detection of a USB flash drive system.

Case 3. If you can't install Windows 7 - not found driver

Probable reason - unsupported hard disk or media. The problem has become particularly relevant with the distribution of USB 3.0.

Distribution of Windows 7 by default does not support USB 3.0.

Therefore, you need to be stocking drivers or to install a non-original image in which these are already present.

You can find and download the appropriate image on request "Windows 7 USB 3.0". If this error is detected, the system provides the ability to install the necessary drivers.

Important! If the installation was made from a flash drive, then you want to rearrange the USB 3.0 connector (blue core) flash drive in USB 2.0 (black core) or via the BIOS interface to disable USB 3.0 support.

If a flash drive, with which the operating system is installed, is made in USB 3.0 format, then in the BIOS you need to disable the USB XHCI Controller option, and for hard disks, turn on the AHCI mode.

Another reason for the occurrence of the lack of drivers is an outdated version of the BIOS.

Overcome the problem helps updating the BIOS program. The problem is that the outdated BIOS does not contain instructions for working with large-volume carriers.

So, you need a reduced (trimmed) installation image and a carrier with a small amount of memory.

There are cases where the driver search error has been associated with a minor mechanical damage to the optical medium - DVD disk.

The problem is solved by recording the installation image to a serviceable medium.

The drive with the "Sex" laser reads not all discs and may allow the read error in the critical unit of the installation data.

After updating the hardware of the computer, sometimes the system installation failure occurs due to insufficient power supply power.

The problem is manifested in a spontaneous reboot of the system during installation or a long irreversible hang.

The widespread and notable blue screen of death will invariably arise when you try to install Windows if there are damaged cells in the computer's RAM.

The only way to solve the problem is to replace the faulty RAM module.

An unpredictable way to install peripheral devices connected to the computer.

Therefore, before installation, you need to disconnect everything except mouse and keyboard.

Installing Windows 7 from USB flash drives and laptop

I can not install Windows 7: how to solve basic mistakes

At one time, the error "Installation program could not create a new one or find an existing system section" was pretty nerves, but fortunately now I know the reason and several ways to bypass or fix it, what I share with you.

The message "Installation program failed to create a new one or find an existing system section" Sometimes you can get when installed Windows 7 or installing Windows 10, it looks like this:

In this case, the partitions on the hard disk can be created, format or deleted, but when selecting a section for installation and pressing the "Next" button, a message is displayed about the impossibility of installing Windows to this disk. Most often, and as a rule, this error occurs when Windows is installed from a USB flash drive.

Causes of the error "Installation program failed to create a new one or find an existing system section":

• In the computer's BIOS or laptop, the first device in the download list is not installed not a hard disk, and any other device is a DVD, a flash drive, loading over a network, etc.
• The computer has more than one hard disk or SSD, which you can not need to disable Windows
• Invalid download settings in BIOS
• A flash drive is made to install Windows is not suitable for this, it is recommended to re-create the boot flash drive to another program and use another Windows image is extremely preferably original.

The most common cause of this error, the first. Starting with Windows 7, the installer checks the BIOS settings and does not always make it correctly if the installer decides that the hard disk you specified to install the Windows you are not selected first in the list of devices for download, it does not allow the installation and gives the message: "Installation program failed to create New or find an existing system section. "

To correct this error, you can do the following:

1. Go to the BIOS and configure the list of devices to download in such a way that the hard disk was always the first in it, in some BIOS there is even a special item Fixed Boot Order - which fixes the order you specified and does not give it to change. In some, usually old BIOS, the order of downloading devices cannot be configured, you can easily configure, but when the flash drive is connected, such a BIOS for some reason always puts it above the hard disk. If the loading order managed to configure, use boot-menu to download from the flash drive, you can call it with the F8-F12 keys in less often ESC, F1 or F2 and then installing Windows will be held in normal mode.

2. There is another more reliable way to solve this problem, you need to split the hard disk and copy the installation files to it, make it bootable and overloaded, in which case the installation of Windows will be running directly from the hard disk and will pass in normal mode without problems. To do this, it is necessary to start the installation and in the installer, create one partition on the hard disk, which will be disk, then press SHIFT + F10, the command line must be opened in it. Multiple teams.

diskpart. - Utility will start

lIST DISK. - Shows the list of available disks, in the list at least one hard disk should be and booting flash drive, it is easy to understand which disk you need to choose to remember its number to select the disk with which we will work enter the command:

sELECT DISK 0. (choose a disc 0 if you have a hard disk under a different number indicate it)

list Part We display a list of partitions on the disk, in the installer you had to create one partition, remember its number and enter the following command, for example, we need a section at number 1:

sELECT PARTITION 1.

active. - We make this section active, that is, it will be used when loading

now it remains to format our system partition, to do this, enter commands:

format FS \u003d NTFS Quick

assign Letter \u003d C (C - the letter of the disk you want to assign the section if you can choose another, remember it, it will be useful for us at the file copying step)

eXIT. - We leave the DISRPART utility and continue to work on the command line.

We need to define the letter assigned to the flash drive in order to copy files from the flash drive to the newly created and formatted partition on the hard disk. To search the letters of the flash drive can be typing the command cD E:or simply e: where e is the possible letter of the flash drive, sometimes the letters are assigned not since the beginning of the alphabet and from the end, try if the disk with the letter you selected does not exist you will receive an error message if the disk with such a letter is that the command will be executed in this case, run the command Dir. It will show a list of folders and files - you can understand what disk belongs to the letter. After the letter assigned to the flash drive, you can start copying files.

For example, the letter of the flash drive e, the letter of the hard disk section - C, then the command to copy files will look like this:

xcopy E: C: / E / H / K

when copying is over to execute the command:

bootSect / NT60 C:(where C is the letter of the hard disk, do not confuse)

The last command makes the boot disk, you can remove the flash drive after it, configure the BIOS to download from the hard disk and restart the computer if everything is done correctly, the installation of Windows must start and go through the regular mode without any problems with the selection or disk for installation. .

After the installation process is completed, you can delete unnecessary entries from the boot menu using the msconfig command, as well as delete the installation files from the hard disk, they will most likely be no longer needed.

I hope this detailed instruction will help you find reasons and correct the error: "We could not create a new one or find an existing system section."

I have a good friend Ruslan, it appeared normal desire instead of Windows XP on his home computer . The user is an advanced, why not, the computer is powerful, the hardware is suitable for all 100%. Purchase a seven in our time naturally is not a problem that we have done, the installation process decided to produce together.We came to him, got a beautiful disk from a bright box, inserted it into the drive. My friend's hard drive is divided into two sections, the first disk (C :) volume of 120 GB, minimum for installing the seven is 20 GB. It is installed on it Windows XP, there is another disk (D :) with personal data, Windows 7 We decided to install on (s :) and everything that was valuable on it were copied on (D :). Everything is ready to install. He went just in case to drive control, made sure that the disc was transformed into Since the dynamic without general formatting the seed will not rise.

Not installed Windows 7 due to a disconnected second screen

Rebooted, went to . I put up the first boot device the drive, the second hard drive, I turned off at all, as the computer often wants to boot from it, nostalgia has it.

• Note: Friends, if you, know, Windows 7 does not support USB 3.0 (ports are usually painted in blue), if your USB flash drive 3.0, insert it into the USB 2.0 port.
• And more information for you, if this article does not help you, try to go to the WA-Bank and read our article.

The process of installing Windows 7, not foreshadowing any problems, the computer at my friend is good and still under warranty. In the window - select a section to install Windows, I select the first section with Windows XP, delete it and click further, starts copying Windows files, then the computer restarts, starting the services, the installer updates the registry settings, again copy files and in the place where you need Enter the username, appears and does not disappear.

• After 5 minutes of useless expectation, we repeat the installation process at which all existing partitions on the hard disk are deleted (personal files are previously copied to the USB flash drive) and installing Windows 7 is performed directly into unallocated space, but everything is no avail.
• Check the BIOS settings, repeat the installation for the third time, Windows 7 is not installed in any. Loaded using the Acronis Disk Director boot disk, I look at the hard drive, everything is fine with the sections, there are no shifts, only two sections. The first suspicion as usual falls on the Windows 7 installation disk and the drive.

• I'm going home and bring my seven and your drive, changing SATA cables at Winchester and DVD Roma, repeat everything again with my drive, as well as my installation disk Windows 7 and to no avail.

• We accept the decision to replace the Winchester for a while, good, I always wear a simple hard disk of the SATA interface by 240 GB. Fully format it, repeat the installation process and imagine everything ends at the same place, selecting a user.

• We sit down and are badly thinking about the motherboard, suspicion of the southern bridge, it is he who participates in the exchange of data with peripheral devices, in particular with a drive. Maybe the RAM? By the way, the computer is on warranty and on all components of the stickers, nor remove or disassemble. Again uploaded Acronis Disk Director, deleted and created new sections with it, everything is useless.

Disconnected the systemist and went to the store to my friends who bought a computer, came and talking: so they say so,not installed Windows 7. We were listened attentively, they took our installation disk with a seven and installed at us on our computer the operating system in 25 minutes and with a grin pushed us a systembook back, they say one zero in our favor.Not at all joyful we arrived home and decided this way: we will understand. Just in case they made a backup of installed Windows 7 in the program And hid it away, resolutely removed the installed seven and launched the installation process at once again. After a while, on pain, a familiar place, a black square Malevich was blocked. What are your thoughts friends?

• Agree to deploy and never find out what the matter is not, I can't live with this, I will not sleep.

Why did everything happen in the store? Another there was a monitor and all cables, in my bag I have something not, change cables and admire the tenth time on the black screen. And monitor? Here we have a guess. How did we not guess before? The system unit at my friend is connected to the monitor, but also with a TV, through the HDMI cable. The video card has an HDMI output and on the TV, too, it means when installing, Windows 7 - sees two monitors and two screens and makes the main screen TV. Then naturally the image of the continuation of the installation of the seven should be sought, as it does not sound funny, on TV. We did not search for anything, but simply disconnected the HDMI cable from the system unit and repeated the installation of Windows 7 in the eleventh time, and all my dear, the seven was installed without any problems, and she had already been installed before, only the user's name had to choose on TV, which by the way everything was necessary This time worked.Already after successful installation, we connected the system unit and the TV, then you went to the NVIDIA panel and configured the screen resolution, that's all.

Friends! Read on our website detailed instructions.