Installation for Samsung SCX 4100. Samsung Frequently Asked Questions regarding the update

In our modern, technological age can not be done without such a device as a printer. Office workers, schoolchildren, students - all needed equipment capable of printing text, drawings, diagrams and even photos on paper.

The printer is distributed everywhere, and each user, after purchase, can configure it. This procedure does not require a call to a specialist, and with the low cost of its time, everything is very easy to do.

And if you have become the best owner of the Samsung printer, and even more so the SCX-4100 model was chosen, the connection with our site will not be much difficult.

Samsung SCX-4100 is one of the latest models of multifunctional devices, combines a printer and scanner. It has the high efficiency of consumables and ease of operation. But, like any computer technique, requires special software for correct operation.

As a rule, it comes when buying with the equipment itself, but there are cases when the drive with the driver "Loop" (CD-disk defect, just scratch) or by chance lost. Do not get upset. With us you can always download the driver for the Samsung SCX-4100 printer of the latest version, for any operating system.

How to install Driver

After downloading the driver, you will only run the file with the extension. EXE, after which the installation of the appropriate software for your printer will begin. It remains only to follow the emerging instructions displayed in Russian.

A simple and understandable procedure available to any user, even inexperienced, only mastering the world of computer equipment.

If, it also happens, there are difficulties in installing, you can always contact the service center.

Search for outdated office equipment may be a very difficult task, especially for MFP components. In the article below, we will try to introduce you to solutions for drivers for the SAMSUNG SCX-4100 scanner.

The device under consideration entered the market for about 10 years ago, which already implies difficulties with obtaining official software. The problem is exacerbated by the fact that Samsung's Corporation not so long ago a Hewlett-Packard printer division, but, unfortunately, did not give them a full package of drivers specifically to this MFP series. The current owner, however, suggested a certain alternative in the form of a universal utility. In addition, it can be obtained by some third-party methods that we definitely mention.

Method 1: Device Support Page

As mentioned above, on the official HP website directly the driver for the scanner is missing, but the device support is nevertheless continues, already in the form of a universal scanning application.

This method does not always guarantee a positive result, especially on the already irrelevant versions of Windows. In this case, use one of the methods presented below.

Method 2: Side Drivers Installers from third-party developers

If it is impossible to obtain software by the official way, third-party solutions come to the rescue. The simplest of them is the use of a driver-driver: as a rule, in the database of such applications, components are inaccessible on official sites.

From all submitted applications, Drivermax has the most extensive drivers archive, so we advise you to use this program. It is not devastable, but the advantage in the form of a large database allows you to ignore the minuses.

Method 3: Multifunction Printer ID

For outdated devices, the software search method for equipment identifier is very effective - it looks like this for Samsung SCX-4100.

Lptenum \\ samsungscx-4100_seri1c03

The network you can find a lot of resources designed to load drivers using the ID, and with a detailed algorithm of procedures you can get acquainted in the material below.

Method 4: System Tools

You can also try booting the driver with "Windows update center" Through. "Device Manager" - The procedure does not constitute anything complicated.

It is forced to note that this method is most effective on Windows 7 and older, since the drivers presented in "Center for updates ..."may not work on topical versions of the Redmond OS.

Conclusion

As you can see, receiving drivers for the SAMSUNG SCX-4100 scanner - the task is very difficult, with a very limited number of solutions. Alternatively, we can also offer to use one of the programs for scanning documents: as a rule, they do not depend on the drivers and allow for the basic performance of the component.

SAMSUNG SCX-4100

Windows 2000/2003 / 2008 / 8.1 / 10 - Universal Drivers

If you have new versions of Windows on your computer, then we recommend using this program. Download the program, install it on your computer and then you can download the driver for the Samsung SCX-4100.

Windows 2008 / Vista / 7 - Driver + Scanner

Blossomy options: x32 / x64

Driver size: 10 MB

Windows 98 / ME / 2000 / XP - Driver + Scanner

Blossomy options: x32

Size program: 5 MB

How to install a driver in windows 10

All Samsung print devices require pre-configuration before use. As a rule, it consists in installing a software product from the equipment manufacturer. This is a fairly simple process that can perform each.

First of all, before the start of the instruction, it is necessary to prepare a distribution. To do this, go through the links posted in the article to download the driver for the Samsung SCX-4100 printer. We find injection in the "Download" folder and run it through the Open menu.

Initially, choose the installation site and copy the program files. To change the directory, we use the "Change ..." button. After selecting, click "Next".

In the welcome window of the software installation wizard, no action is required, so we immediately click "Next".

Attach the device using a cable from the kit. It is necessary to do this as shown in the picture in the Installer window. After completion, do not forget to turn on the power of the printing device. Go to "Next".

The program will configure the printer and registering it in the system. It will take 2-3 minutes. At the final stage, remove a tick from the point "Yes, I want to register" and click on "ready."

Now you can try printing text on the printer.

There is a special program from Samsung, which will allow you to download and install the driver for your device. If the drivers do not fit below for you, we can advise you this program. More about it, (on this link you can also download the program).

Windows 2008 / Vista / 7

Bigness: 32/64.

• For printer (9.6 MB): Samsung SCX-4100-Printer
• For scanner (5.24 MB):

Windows 98 / ME / 2000 / XP

Bigness: 32/64.

• For printer (5.52 MB): Samsung SCX-4100-XP-PRINTER
• For scanner (8.44 MB): Samsung SCX-4100-XP-SCAN

Installing Driver in Windows 7

Installing the driver and the control utility for the printer is a fairly simple process. At first, you download the desired driver from the portal, where you are now here (you can find the download link), then you open the "Downloads" folder and run the downloaded file. A window will appear where we will specify the path to unpack system files. We do not touch anything - we leave everything as it is, click "Next".

To continue installing the SCX-4010 printer software, click "Next".

In order for the installer to continue its work, you must connect the printer to the computer in the off state. In the current window wizard, the installation wizard is shown to do it correctly. When the printer is connected, press the power button and click "Next". Third-party pop-ups at this stage simply close.

From the user no longer need actions. In the next window, you can observe the process of installing the driver and follow progress. The usual file copying procedure lasts from 1st to 5 minutes, but the exact time depends on the computer and the installed operating system.

If there will be no problems with installing the driver, a window will appear in which it will be indicated that "Installation is complete". Click "Ready."

Now the computer can be successfully used with the printer.