Run the DVD disk on a laptop. How to run a disc on a laptop

It seems obvious, but not everyone. Many new laptop owners are not so easy to play DVDs on their new Acer laptops, as it seems. In connection with my work, I often ask this question. Here are some simple solutions so that you can run a DVD on the Acer laptop.

Instruction

1 Make sure your laptop has anyway to play DVDs. On a laptop, there should be an image of a familiar white emblem on the retractable lid DVD drive. If this image is not, you will only be available to play CDs.
2 If you detected the DVD emblem, press the button on your Acer "E to push the DVD-drive cover.
3 Place some DVD to face up and gently press on the lid so that it goes back, and then wait when the playback starts automatically or the menu will appear.
4 If the DVD playback does not start automatically (or when you see the selection menu), you will need to configure the autorun. In Microsoft Windows, click on the "Start" button -\u003e "Control Panel" -\u003e "Auto Tap" and select Automatic DVD playback.
5 If you have the Windows Vista Home Basic Edition operating system installed, Windows Media and Real Player may incorrectly play DVDs. You may want to download free player from download.com. Then you have to run the player each time manually.
6 Select which action should make the Windows operating system each time each time you run a DVD on the ACER laptop (in the drop-down menu). You will have to choose at least two media players or you can choose "not perform any actions" if you do not use the player through the pop-up menu.
7 Pull out the DVD and re-insert it into your Acer laptop. Now all your DVDs will be successfully running every time using the player you choose.
8 Find the control buttons at the bottom of the screen. These are standard DVD controls, such as a volume control or a pause button. You can click F11 for a full-screen viewing mode if the settings are arranged.

Usually, when installing a CD or DVD drive to an optical drive, a personal computer automatically reads the carrier content and the function turns on autostask, it is called: Autostat.

In addition, today the autorun function on computers works not only with CD or DVDs, but also with USB devices, such as USB drives (flash drives), digital cameras, etc.

But sometimes Autostat does not work. And it scares many, but there is nothing terrible in this. The autorun function of the disks is the attacked and you can enable it or disable yourself in the computer operating system.

The autorun feature allows you to reduce the user's time to start the contents of the media. The computer automatically determines the file formats and selects the desired program or rolls the context menu and offers to select the desired action.

Configured autorun is very simple. Suppose you want to configure this feature to automatically start CD or DVD discs. Open folder: My computerchoose: Properties And go to the tab: Autostat.

You will open a menu with a list of actions that you can choose. Moreover, this list can be different, depending on the installed programs on different computers. Here is what one of the options for this menu looks like:

From the drop-down list, choose the type of files recorded on the CD or DVD disk. It is better to set the parameter: Mixed contentbecause Discs come across different and say in advance that it is usually written on the disk it is usually impossible.

And choose the action you want to perform. Dalnal click buttons: Apply, OK and the autorun function will work without your participation. Those. After installing the disk to the optical drive, a query will be issued for performing the desired action.

But here there is another moment so that the disk is played automatically, the file must be recorded in the root folder: Autorun.inf.. Naturally, this file is created by disk developers. But if you yourself prepare a disk with some information to record, then create such a file simply.

Create a text file in the usual notebook and give it a name: Autorun.inf.. Open the file in any editor, for example, in the same notepad and write the following code into it:

open \u003d setup.exe.
icon \u003d cd.ico.

The first string "says" to the computer that you need to run the autorun function. The second line "says" what to run to execute the file setup.exe., Which should lie at the root of the disk (or some other file that you want), the third line gives the command to load the icon (you can do without it).

In the same way, you can configure autorun and other devices that you connect to a computer, such as any removable USB media. Select this device in the menu: My computer, Properties, Autostat And set up the execution of the desired action.

That's how the autorun menu can look like (list of actions offered) depending on the programs installed on the computer:

Sometimes users are deliberately disconnect the autorun function to avoid computer infecting with viruses. The fact is that in the same file Autorun.inf. You can register other commands that run the installation of a malicious code. The virus can be recorded both on the disk and download from the Internet.

Therefore, if you doubt the origin of the disk, it is recommended to view the file Autorun.inf. Before automatic installation. Make it easy. Cancel the automatic installation of the disk content, locate the file Autorun.inf. And open it in any editor, for example, in notepad. For a normal disk start, just 3 lines of code (see above).

If you find something else in this file, especially links to resources on the Internet, then most likely such a link will download the virus or malicious code on your computer.

To turn off the autorun, it is best to edit the registry. To do this, go to the registry editor ( Start / execute / team: regedit.), Find the following registry keys and set such values:

Key:

Parameterandvalue:
"Autorun" \u003d 0

Key:

Parameterandvalue:
"Nodrivetypeautorun" \u003d ff

Key:

Parameterandvalue:
@ \u003d "@ SYS: DOESNOTEXIST"

Key:

AutoplayHandlers \\ Cancelautoplay \\ Files]
Parameterandvalue:
"*.*"=""

When there is a need to use autorun, then you need to change these keys in the registry as follows:

Key:
Parameterandvalue:
"Autorun" \u003d 1

Key:
Parameterandvalue:
"Nodrivetypeautorun" \u003d 0

Key:
Parameterandvalue:
@=""

Key:
Parameterwe needdelete:

In the section on the question, how to listen to the CD mp3 disk on the computer? What is it necessary for this? I first time. Posted by the author User deleted The best answer is Evil you are all here. Baby, listen.
Click on the CD or DVD DVD button (which you have on the system), carefully put the CD disk on the "cup" of the jar of the mirror surface, see the disk does not shift, click on the tray button (disk (disk). If you have xp or at least 2000 windows, then after initializing the disk (it will unwind up to awesome speed) pops up the window. Choose "Play". If the window does not jump out, then just in the "Explorer" open CD / DVD drive and then click 2 times on any MP3-sink file. Everything will open, everything will listen. Because, even if there is no Winampa, the MP3-Schnicks are compared with the standard Mazdai media player. Yuzai!

Answer from Food[guru]
Insert into the drive and listen!

Answer from First-class[guru]
insert the disk into the drive
wait
menu will appear on the screen
choose "Play"

Answer from Alexei[newcomer]
Head, hands and computer !!

Answer from Sign up[guru]
Comp, Sidyuk, disc, mouse, columns, ears and brain for perception of what is happening. 😎

Answer from Teacher_ikt.[guru]
It is possible to need a media file player - the standard is in Windows

Answer from Galina Zaychikova[guru]
insert into the drive and listen

Answer from User deleted[active]
wow))
you can listen through any player, for example Winamp
if not one is not installed that is standard
how to find: Start - Standard - Standard - Entertainment - Windows Media Player
and you can enjoy music
good luck !!

Answer from Alexey Melnikov[guru]
to do this, you must at least so that there are columns, then insert the disk in the CDROM when the disk is initialized, you will spend the nameplate with possible options, choose to play the disk and listen to the health. Special programs for this do not need. Player built into Windows

Answer from Alfiya.[guru]
twist on the finger

At times, the TV is equipped with the only antenna entrance - nothing more. Applies portable models, old, Soviet release. Why connect the DVD player? Saving: Avoid paying new equipment. Plasma panels are not suiced. Is it worth spoiling the eyes with an electron beam tube, solve yourself. Let's discuss how to connect a DVD to the TV. In terms of revealing the cause of unsuccessful fishing directly. Technique goes forward, - Let's follow the heels.

Why it does not work connect the antenna input of the TV and RCA

Physics introduced the concept of bandwidth. Analyzing the signal, come across the term. Cable, Ether, Earth's atmosphere, Electronic Device Cascades. It turns out that low image frequencies, the sound is shortly propagated by ether - they fade quickly. Engineers quickly came up with the method of correcting the difficulty. Frequencies are found undergoing successfully invisible ether, medium. First of all, the cable. Frequency found how to lay useful information? Modulators are used. One parameter of the carrier frequency varies by following the information law.

Carrier is called harmonic (sinusoidal) oscillation, whose frequency is much higher than the spectrum of the transmitted information. Musicians with higher consider notes of 20 kHz, incurs the information, overcoming the air, the cable is the frequency of at least 150 kHz (middle of the dv range).

If you change the low-frequency signal parameters of the carrier, the spectrum becomes symmetrical relative to the harmonic of the carrier. We remember said: Engineers installed, the wave easily passes the cable, air. The throughput of the ether (more precisely atmosphere) is tracked, some waves pass better, the other worse. It is impossible to modulate the process, customizing the settings of the tasks performed. The technological development of humanity is too low.

Change cable settings. Product transmitting products are constructed to satisfy the needs of users. You can create conductive lines in a convenient way, before emissions to the antenna convert the signal again, but the technique complicates life. The explanation of the explanation is slightly simplified, on the KV, the Broadcasting is carried out, using the ability of the wave to turn the earth. To greater degree, the effect is demonstrated by DV.

The satellite antenna converter uses the transformation scheme described above. High frequencies are lowered, the cable is transmitted, decoded with the TV, the console. The main readers understand: not from a good life information transmitted by ether, cable, is distributed by the carrier frequency.

The reception side is carried out inverse process for removing information from carrier. Accepted antenna, cable input signal strengthened. The task is performed by a high-frequency path. The length of the connecting cable is one and a half meters (typical DVD player), strong attenuation will not arise, the loss determines the length of the medium. The need to introduce carrier disappears, the DVD player transmits the information of the TV in the form of reproducible speakers, the screen. The technical solution will allow you to solve the method of the modulator, demodulator from the design of the instruments.

Received the so-called Tulip (RCA), which carries the dominant position in video engineering:

The yellow canal transmits an image signal without carrier.
The white channel transmits mono sound, the left column signal.
The red channel transmits the sound of the right speaker stereo mode.

Analog signal occurs, do not attempt to connect the DVD player to the computer monitor. The display is a pure digital device. Accordingly, the signal structure does not resemble RCA. The industry has released the mountain of adapters, adapters that perform the transformation. Now readers understood the features of direct DVD connection to the TV. High-frequency antenna entry, will try to find a missing carrier. Channel bandwidth 1 - 12, will not see the DVD player signal.

DVD Player Connection Cable

Adapters for connecting a DVD player to TV

How to connect a DVD to a TV? Find, examining the RCA adapter shop on an antenna connector (the issue price is 640 rubles). 3D on TV hardly look at the TV. The converter is located a small box, needs food. An AC adapter 230 volts 50 Hz is attached. By connecting the DVD player on the one hand, the TV is on the other, watch movies from disks. A good option, some not work for two reasons:

Need to pay additional equipment (adapter).
The store is far away, the movie you want to watch now.

Bad enthusiasts other enthusiasts offer:

At home are not thrown into the prefixes of the 90s. Remember Sega, Dendy, other boxes where the game cartridge is inserted.
Each prefix contains a HF (RF) block that converts a signal for feeding the antenna television input.
The unit is equipped with a minimum two output connectors of the "Tulip" composition (3RCA).
Lovers noticed: if you submit a signal to the 3rca (yellow, white channel) input, the output of the antenna produces a suitable image.

How switching was carried out inside, remains a mystery. No matter why the fluctuations of the scheme pass from one output to another. Remove the RF (RF) block from the console, if necessary, shut down the shutdown buttons (if there is such). Then we look at. It happens, not all outputs are connected to the diagram. We put jumper. Separate outputs are spoiled by resistors, you can short, removing resistances at all.

Connecting "Tulip"

It remains to supply the power scheme. Traditionally use 8 - 12 volts (measure the Chinese tester). The adapter of the phone is not suitable, from the prefix, radio, - please! If there is a 7805 stabilizer chip, see if it is taken from it. In this case, connect the phone adapter to the output 7805. There will be no difference. The 7805 stabilizer simply converts 12 to 5 volts. A similar high frequency unit contains a video recorder. Find the input information, try to adapt the device to your needs.

Connecting a DVD player to a TV through the SCART connector

It is recommended to deal with the SCART connectors layout. Universal tire, where there is almost everything. Drops off the collapsible SCART plug, the connector corresponding on the TV, forget the problems. The experienced radio amateurs disassemble the layout, they are repaid, use. Led below the SCART connector drawer, also bring: Yellow RCA connector is called composite video. See which terminals pass the sound, Image:

Picture:

Login: Yellow Plug "Tulip".
Exit: Terminal 18 SCART - Earth of the Incoming Flow Video, Terminal 20 Scart - An Incoming Flow Video Signal.

Sound:

Left column. Login: White Tulip Plug. Output: Terminal 6 SCART - left column input.
Right column. Login: Red Tulip Plug. Exit: Terminal 2 SCART - Log in the right column.

SCART SCART

Sound land is common to both channels, is located on the 4 SCART terminal. The drawing indicates the colors of the component connector. Pins are marked red, green and blue. Later we consider the option. Know that the difference between the "tulip" and SCART is only in the layout. You can connect the contacts with wires without any adapter. Finally, many are interested in, probably, the question where to take the land on RCA? We assume the external braid (screen). Just in case, measure the tester. If the DVD player is called with the circuit ground, it is. However, other options are simply not observed.

If someone else does not understand, the cable for connecting the DVD to the TV should be soldered with your own hands. To do this, you will need to find a collapsible SCART connector, 3 RCA plug under the "Tulip". Many DVD players, especially indigenous Chinese, has a component video output. It differs from composite high quality. Plugs in this case 5, three of which transfer video. Difference signals are transmitted between the levels of colors. High quality is obtained due to redundancy.

The RGB mentioned above in some cases are suitable for component video. There was information that it works not with all the DVD players, televisions, it is not necessary to check it, for the simple reason that all options are not overgrown, but it was previously that the store is far away, or you don't want to spend money. Began to be starting to solder.

Picture:

Login: Red YPBPR connector plug.
Output: Terminal 15 SCART is the distribution of red and brightness PR, Terminal 13 - Land PR.
Login: Blue plug connector YPBPR.
Output: Terminal 7 SCART - the difference between the blue and brightness PB, terminal 5 - Earth PB.
Login: YPBPR green connector plug.
Exit: Terminal 11 Scart - image brightness Y, Terminal 5 - Earth Y.

Sound:

Left column. Login: White Sound Plug Sound YPBPR. Output: Terminal 6 SCART - left column input.
Right column. Login: Red Sound Plug Sound YPBPR. Exit: Terminal 2 SCART - Log in the right column.

Sound land is common to both channels, is located on the 4 SCART terminal. There is a question of how to go to the numbering. The answer is simple. SCART contains a mechanical key - protection against improper inclusion. On it and focus. Considered connectors for connecting DVD to TV.

- This is a portable computer. The same computer, as well as stationary and in it the same details, only smaller. Therefore, the laptops are more expensive. It can be compared with a mobile phone, and an ordinary computer with a regular home phone.

In order to open disk or flash drive on a laptop, I must first insert them.

Let's start with a CD or DVD:

Look at the laptop:

Either side, or on the front there is a device for disks. It is called a CD or DVD drive.

To open it, you need to click on a small rectangular button.

When you click on this button, it will give a click, and the drive slightly extends from the laptop. Carefully "help" to put forward until it stops. Then you need to literally "wear" a disc on it with a brilliant side down and "push" in a laptop to a familiar click.

After you inserted the disk, wait the seconds 15: the disk can open it yourself (it happens with the disks that films and music are recorded). If this does not happen, open the "My Computer" icon. It is either on the desktop, that is, on the screen, or it can be opened from the "Start" button:

Then click two times the left mouse button on the "CD drive" icon (also can be called CD-RW, DVD, DVD-RW drive).

What is written on the disk.

And now we will learn open flash drives. They look like this:

In order to open a flash drive on a laptop, you need to insert it into a special hole:

Several such holes you will find either side or back.

After you insert a USB flash drive into one of the holes, open "My Computer" (remind you, it is either in the "start" or on the desktop).

There should be a new icon. For example, such:

Usually this icon is called "Removable Disk". Click on it twice the left mouse button. You will appear what is written on the flash drive (files and folders).

Before you get a flash drive from a laptop, click on the special icon on the right below (next to the clock) once with the left mouse button.

The message "Safe Removing the USB Storage Device" appears. Click on it once the left mouse button. The message will be highlighted "The equipment can be deleted." Now you can get a flash drive from the computer.