How to revive the old one. How to revive old strings

If the thought occurred to you: “How would I return the sound to the old strings,” then everything is very bad. Despite the fact that strings are one of the most quickly consumed materials, not everyone can afford to buy a new set every month.

The article will not contain detailed information on how to care for them, prolonging their life, today we have another task - to explain to you how to briefly return the former sound of already “dead” strings.

To begin with, let's briefly understand the reasons for the rapid fading of sound.

Due to the special structure of the human body, the strings constantly experience damage. Our hands, even washed three times, begin to sweat while playing and leave dirt on the guitar that has accumulated between the turns of the strings, thereby reducing their brightness.

In order to delay the moment of removing the old set as long as possible, it is necessary to wipe them with a dry or alcohol-free cloth after each game. But what if all these methods have not worked for a long time, and the strings have stopped responding even to special care products? There is a way out - the guitarist's soup.

Recipe for cooking.

First you need to unwind the pegs and carefully remove all the strings. Then we twist them separately, approximately how they looked when they were bought, and put them in a cauldron. Then put the pot on the stove and boil. The boiling process should take about 10-15 minutes. After the time has passed, your soup is ready and can be eaten :)

Besides jokes.

Drain the water and carefully remove the strings. We unwind them and wipe each with a dry cloth (it is important to use a lint-free cloth). As a result of boiling, grease and sweat were removed from the strings, as well as some of the dirt that clogged between the turns. Let the strings dry well before they are ready to be installed. The sound will again acquire a pleasant shade of freshness and brightness. Unfortunately, such a procedure can be carried out no more than once, and the “new” sound that we get after boiling will not stay with us for long.

For those whose strength is not enough for such barbarity, it can be done in a more liberal way, in which it is enough to wash the strings with a sponge and a special dishwashing detergent, and then rinse in cold water. Of course, after removing them.
Attention!

These methods are rather entertaining in nature and are used in exceptional cases of lack of funds or sudden great interest. The best way to bring back the original brightness is to buy new strings.

Strings that have been used for more than 6 months may suffer from corrosion. This set is no longer recoverable.

When a shoe becomes a favorite, it is very difficult to part with it. I want to wear it all the time. But this, unfortunately, is not always possible, because any thing has its own expiration date. Often shoes deteriorate. But this does not mean at all that it should immediately be thrown into the trash can. There are so many options on how you can reanimate used shoes so that they become much better than they were before. We have collected the most popular methods of restoration and alteration of shoes that everyone can use.

Turning leather into suede

If your old leather boots are already pretty worn out, but you don’t have the strength to part with them, there is a great way to save your favorite pair - remake the leather into suede. To do this, you need to stuff the boots well inside with paper so that they do not lose their shape. Then sprinkle with any alcohol (vodka is good for this) and rub the shoes with a metal brush or pumice stone. Of course, the effect depends, first of all, on the quality of the skin. With a cheap option, this trick will not work.

Boots with glitter

Any boring or old shoes can be easily remade into a glamorous and elegant one. To do this, it is necessary to seal the heel with tape (so that the sparkles do not spoil it), grease the metal parts (zippers and rivets) thickly with petroleum jelly, stuff them with bags or paper from the inside so that the shoes keep their shape well. Next, glue small areas of the shoe with glue and sprinkle them with sparkles, and, to be sure, you can press them with your fingers. By the way, do not feel sorry for the sequins, otherwise the shoes may turn out to be “spotted”. That's all. Now you just need to dry your boots and voila - glamorous shoes are ready. Tip: shoes with smooth leather must first be wiped with sandpaper, otherwise the sparkles can quickly crumble.

golden shoes

In order to convert ordinary shoes into shiny ones, we suggest using the previous advice with some amendments. Lacquer shoes also need to be rubbed with sandpaper, so the sparkles will go better. But, before coating, we recommend that you first mix the glitter with glue in a separate container, and then apply it to the surface of the shoes with a brush. By the way, since this process is rather “dirty”, we recommend that you first lay out a newspaper, otherwise the sparkles will spread with crazy force throughout the apartment.

We restore fabric sneakers

If small scuffs or holes appear on the fabric basis of your favorite sneakers, it doesn’t matter. Defects can be fixed with a patch. To do this, you must first sew a piece of raincoat fabric on worn places. It is best to do this from the outside, so as not to experience discomfort while wearing. Then you need to cut a piece of the patch of the desired shape, remove the protective film from it and attach the fabric to the shoe. With the iron heated to the maximum, iron the thermal patch until the wrinkles disappear on it.

Reworking boring sandals

If you don’t want to wear old sandals anymore, but it’s a pity to throw them away, then they can be easily redone. To do this, you only need nail polish or paint in a spray can. Strappy shoes are best suited for such an alteration, because they are the ones that need to be varnished. Of course, you should also paint over the toe and heel, if any.

To whiten white soles on sneakers or sneakers, which get dirty very quickly, you need to grind citric acid powder over the entire surface of the sole. Shoes should be left on for a while and then washed off with water. An old toothbrush and whitening paste is another proven way to deal with dirt on the soles of sneakers.
In order to wash shoes in a washing machine, it is necessary to put them in a special bag. Then select the delicate washing mode with a water temperature not higher than 30 degrees.



But there is another problem that everyone faces while wearing shoes - this is an unpleasant smell, which is sometimes very difficult to overcome. But it is still possible, because there is

The devastation in the kitchen creates dissonance throughout the apartment. It is difficult to keep the desired comfort when the seams between the tiles are covered with mold, fungus is visible in the corners, part of the tile is beaten off or scratched.

How to reanimate old tiles in the kitchen without excessive financial costs? It is enough to update the main sources of ugliness (seams, damaged areas) to return the kitchen to its former neatness. And if you still make an effort to decorate a tiled apron, then you can completely transform the room in a short time.

Kitchen tile repair - cheap and fast

What can be done with a tile in the kitchen that has lost its original appearance over a long service life? The most repulsive impression is made not by broken off pieces of tiles, but by mold and fungus on the seams.

Tidy up the seam - the tiled apron will immediately acquire 60% of the lost gloss!

Cracked tiles, especially those with large chip marks, cause a feeling of decay, so it is necessary to carefully replace the damaged tiles. Often the old tile burns out noticeably and new elements are knocked out of the general row, so the kitchen tile can later be painted in a new color or covered with a vinyl film. Sometimes it’s easier to fill holes with putty, especially if you plan to apply a textured pattern over the tile.

Before starting repair work, be sure to carefully treat the apron with cleaning products. Use a medium hard brush for cleaning. It is most convenient to clean the seams from putrefactive deposits with powder means - take an old toothbrush and process each seam as deeply as possible. After cleaning, you need to degrease the tiles and seams. For this purpose, suitable: pure alcohol, herbal tinctures, strong alcoholic drinks.

Updating the seams - getting rid of mold

Updating the seams is a simple but time consuming task. Depending on the degree of contamination, two methods can be used:

• Cleaning agent. In case of light contamination, it is enough to treat the seams with a specialized cleaning agent, which includes antifungal agents and bleaching dye.
• New grout. Is the pollution so strong that it cannot be cleaned? You will have to remove the top layer of the damaged grout, treat the seams with disinfectants and apply a new grout. In most cases, this method allows you to achieve the effect of "new repair".

Grout is a kind of frame for tile tiles, so it’s enough to choose an unusual shade to radically transform the kitchen. Among bold designers, bright types of grouts are very popular, creating a welcome contrast.

Tile replacement - full or partial

Psychological research unequivocally confirms the everyday opinion that the kitchen is the main room in the house. It prepares a variety of food, spend time with family, receive guests, and even work or study in large families! As a result of intensive use, even elite tiles can quickly fail.

High humidity, poor air conditioning, improper location of household appliances (creating a heat wave), mechanical damage lead to the formation of microcracks on the tile, and then solid chips. How to update the old tile in the kitchen without resorting to its complete replacement? It is enough to remove the damaged areas, replacing them with new ones.

Tile repair with old tile remnants

Many people buy tiles "with a margin" to use in case of damage to the backsplash. Using leftovers is an excellent way out if the main part of the tile has not had time to burn out or subsequent decoration is planned.

Replacing old tiles with contrasting tiles

Modern tiles often have an unusual pattern. They are used as decorative elements. New tiles create bright accents in the kitchen, so often not only damaged tiles are removed for its installation, but also several whole ones (creating the necessary symmetry).

Regardless of whether there is a pattern on the tile or not, you need to very carefully remove unnecessary pieces. Refuse to use rough methods - a chisel is only good for destroying all the old tiles! Scrape the seams around the tile to be removed, then use a drill or puncher to make 5-6 holes around the center of the tile - this will help you quickly and easily replace it.

Painting kitchen tiles

Painting is an extremely quick way to update a tile. It is quite difficult to achieve a decent result, especially if a bright pattern is visible on the old tile. After cleaning and degreasing the surface, treating the seams with a new putty, you can start painting.

Apply 2 even coats of primer, being careful not to leave brush marks. The composition of the primer should include moisture-proof and antifungal elements.
Carefully paint the tile, achieving a uniform effect. You can use balloon paint - it is applied according to the "spray" principle and gives more chances to create a uniform layer.

Decorating a tiled apron

There are quick ways to decorate a boring kitchen that are good for being cheap but bad for being short-lived. Each of the methods requires careful preparation - it is often necessary to treat the places where the decorative material is applied with sandpaper, degrease them, level them with putty.

Film

Self-adhesive film with an adhesive coating on the inner layer and vinyl in saturated colors on the outer layer gives instant results. Complex geometric patterns performed against the background of a plain tile look spectacular.

The film is not only smooth, but also textured. Vinyl looks quite noble if you paste over the tiles with it correctly. The key task when decorating with self-adhesive is to prevent the formation of air bubbles under the film.

creative stickers

Tile stickers are an instant way to brighten up a space. They look a little cheap, but they are inexpensive, which allows you to change them often.

Particularly popular in the kitchen are images of flowers, flying birds, fruits, and delicious treats.

Paper

Paper does not survive well in the kitchen, but even it can be used for decoration. A valid option for decorating the kitchen are small paintings made on canvas or thick paper with acrylic paints. It is best to place only glazed works of art, whose plot, in terms of colors and semantic content, fits well into the interior.

Original drawing using a stencil

Paper is used as a stencil. An unusual pattern is created on whatman paper or tracing paper, then it is fixed in the place that needs to be ennobled, circled with a marker and the resulting outline is carefully painted.

Decoupage in the kitchen - original, simple, fast

Decoupage technique allows you to very effectively transform the space of the kitchen. For decoration, you can use special patterned decoupage paper or pieces of beautiful wallpaper left over from the repair of other rooms.

And broken tiles can also be attached.

Probably, I will not be mistaken if I say that every woman in her cosmetic bag eventually has the so-called "outsiders" - shadows, blush, bronzers, and so on. Something is broken, something is disliked or tired.

And what to do with all this? You can throw it away, but there is a better idea. .

Take a palette of broken budget blush or shadows. We wash the palette and peel off the aluminum inserts.

Now what is needed is alcohol and glycerin for pure pigments and mica. The shadows already contain a binder (binder)

We also need some kind of convenient container for mixing tones. From improvised materials:

Plastic spoons for pouring and grinding ...

And what we will make the actual shadows from is the source material - jars of unsuitable tones and, for example, the tone of the shadows that you are using at the moment.

We take broken shadows ...

And mix with alcohol and a drop of glycerin.

To a viscous homogeneous consistency

Since these were originally pressed shadows, there is already a binder there, and you need to use just a drop of glycerin. Pure pigments (mics) require more glycerin. This is the most difficult moment - do not overdo it with glycerin, otherwise the shadows will be completely creamy ...

Then, lifting it, we throw it on the table from a height of a couple of centimeters to get rid of irregularities and air bubbles. The surface of the shadows will become even and smooth ...

The result is a silvery brownish tone. Let's add a little more yellow to make the tone warmer.

In parallel with mixing, it is advisable to do samples on the hands to look at the color in the application. The top one is the first, the bottom one is with the addition of yellow ...

If the result does not suit you, you can add a little more dirty pink.

Here is the color comparison

If too much glycerin is added during kneading, the shadows will end up almost creamy. Although many liked it, perhaps even more.

Three tones of basic and final

Three tones of basic and final

Until the end result is...

Alcohol will disappear the next day, those shadows that turn out to be not cream can be tamped down Let's try to give new life to unnecessary things

After drying, the shadows are applied evenly, last for a long time, all day long from morning to evening, nothing will float, roll, crumble or imprint.

Dear ladies, I wish you creative success!

or use the social buttons nets below ;)

Tips for redoing old shoes
When a shoe becomes a favorite, it is very difficult to part with it. I want to wear it all the time. But this, unfortunately, is not always possible, because any thing has its own expiration date. Often shoes deteriorate. But this does not mean at all that it should immediately be thrown into the trash can. There are so many options on how you can reanimate used shoes so that they become much better than they were before. We have collected the most popular methods of restoration and alteration of shoes that everyone can use.

Turning leather into suede

Leather shoes are easy to convert to suede
If your old leather boots are already pretty worn out, but you don’t have the strength to part with them, there is a great way to save your favorite pair - remake the leather into suede. To do this, you need to stuff the boots well inside with paper so that they do not lose their shape. Then sprinkle with any alcohol (vodka is good for this) and rub the shoes with a metal brush or pumice stone. Of course, the effect depends, first of all, on the quality of the skin. With a cheap option, this trick will not work.

Boots with glitter

Easy to make glitter boots at home
Any boring or old shoes can be easily remade into a glamorous and elegant one. To do this, it is necessary to seal the heel with tape (so that the sparkles do not spoil it), grease the metal parts (zippers and rivets) thickly with petroleum jelly, stuff them with bags or paper from the inside so that the shoes keep their shape well. Next, glue small areas of the shoe with glue and sprinkle them with sparkles, and, to be sure, you can press them with your fingers. By the way, do not feel sorry for the sequins, otherwise the shoes may turn out to be “spotted”. That's all. Now you just need to dry your boots and voila - glamorous shoes are ready. Tip: shoes with smooth leather must first be wiped with sandpaper, otherwise the sparkles can quickly crumble.

golden shoes

With the help of sequins you can make golden shoes
In order to convert ordinary shoes into shiny ones, we suggest using the previous advice with some amendments. Lacquer shoes also need to be rubbed with sandpaper, so the sparkles will go better. But, before coating, we recommend that you first mix the glitter with glue in a separate container, and then apply it to the surface of the shoes with a brush. By the way, since this process is rather “dirty”, we recommend that you first lay out a newspaper, otherwise the sparkles will spread with crazy force throughout the apartment.

We restore fabric sneakers

Worn sneakers can be restored with a patch
If small scuffs or holes appear on the fabric basis of your favorite sneakers, it doesn’t matter. Defects can be fixed with a patch. To do this, you must first sew a piece of raincoat fabric on worn places. It is best to do this from the outside, so as not to experience discomfort while wearing. Then you need to cut a piece of the patch of the desired shape, remove the protective film from it and attach the fabric to the shoe. With the iron heated to the maximum, iron the thermal patch until the wrinkles disappear on it.

These beautiful sneakers are obtained after restoration with a patch

Reworking boring sandals

Sandals can be repainted with regular nail polish
If you no longer want to wear old sandals, but it’s a pity to throw them away, then they can be easily redone. To do this, you only need nail polish or paint in a spray can. Strappy shoes are best suited for such an alteration, because they are the ones that need to be varnished. Of course, you should also paint over the toe and heel, if any.

Useful shoe cleaning tips
To whiten white soles on sneakers or sneakers, which get dirty very quickly, you need to grind citric acid powder over the entire surface of the sole. Shoes should be left on for a while and then washed off with water. An old toothbrush and whitening paste is another proven way to deal with dirt on the soles of sneakers.
In order to wash shoes in a washing machine, you must always put them in a special bag. Then select the delicate washing mode with a water temperature not higher than 30 degrees.