Button to exit to safe mode. How to start your computer in safe mode and what to do next

Perhaps, any user at least once encountered quite serious failures in the operation of the operating system. We are talking about those cases when even the banal inclusion of a computer became a big problem, or when viruses caused great damage, so that even after starting the computer, it was simply impossible to use it. It is in such situations that it is worth using the so-called safe mode. In this article, we will figure out how to start a computer in safe mode and what, in general, it is. Let's get started. Go!

When you turn on safe mode, the PC loads only the services that are required for the operation of the operating system, which minimizes the likelihood of various failures and errors during startup.

If you have a computer running Windows 7, you can enable safe mode as follows:

Restart your PC first.
Then, during the boot itself, press the F8 key on your keyboard. Please note that in certain BIOS versions, after pressing F8, a boot disk selection window may appear. If this is your case, specify the system drive and, as soon as the download continues, immediately press F8.

After that, the system menu should open with a list of different ways to boot Windows. If you are not going to use the command line, select "SafeMode". You can also boot with network drivers (Safe Modewith Networking) or command line support (SadeModewithCommandPrompt). When you switch to SafeMode, you will see a list of all downloaded files on the screen.

If some error appears during this, you can see which file has the problem. Now let's look at how to enable SafeMode on a computer. Here everything is somewhat simpler. Use the Win + R key combination to open the Run window and type msconfig. In the System Configuration window that opens, go to the Boot tab. In the "Boot Options" section, check the "Safe Mode" checkbox. Then click OK and restart your PC. After the restart, the system will start in SafeMode.

There is another way. Open the Start menu and navigate to Settings. Select Update & Security. Next, go to the "Recovery" tab. Scroll down to the "Special Boot Options" section and click on the "Restart Now" button. A menu will appear in front of you, where you should select the desired mode.

There you can also launch other modes that may be useful if there are problems with the system. For example, disable mandatory driver signature verification, disable early antivirus startup, or disable automatic restart after a failure. The selection is made using function keys or numbers.

You can also activate SafeMode using a bootable USB flash drive or recovery disk. First, boot from your existing drive, and then use the Shift + F10 key combination to open the command line. Run the command: bcdedit /set (default) safebootminimal or type "network" instead of "minimal" if you need network driver support. There is another way to open the command prompt. While in the window with the "Install" button, click on the "System Restore" item, which is located in the lower left corner.

Exiting their safe mode is the same as turning it on. Just select "Normal Windows Boot" if you did it through the BIOS, or just uncheck it if you enabled SafeMode through the system configuration window. Now you know how to start your computer in safe mode.

As you can see, this is not at all as difficult as it might seem at first glance. Write in the comments if this article helped you and ask any questions you have on the topic discussed.

A new smartphone or tablet based on Android always works without failures and glitches. But what to do if, in further use, the device suddenly “slows down”, the speed of its operation slows down, applications do not work correctly, the sensor reacts unstably? Such problems can be solved by enabling the safe mode of operation. On an Android device, Safe Mode will allow you to determine what is causing the problem.

If the phone is working normally in safe mode, then the “glitches” with it are due to some application.

How to turn on: 3 ways

Of all the methods of inclusion, the most relevant, perhaps, are the following:

Method 1

Method 2

Turn off the phone.
When the display shows an inscription corresponding to the brand name of the smartphone or the inscription Android, you must press the volume up button.
In this case, after turning on, the inscription “Safe Mode” will appear at the bottom of the screen.

Method 3

If the above methods do not work, then try this:

The device must be turned off.
While downloading, hold down the volume down button.
After that, safe mode will turn on.

Note: in some versions of Android, to switch to Safe Mode, you need to restart the smartphone manually, and at the time when the operating system logo appears on the screen, you need to press the volume up and down buttons and hold until the device is fully loaded.

How to disable: 2 options

No less relevant is the issue of disabling safe mode. Before doing this, you must restart the device, and then use one of the proposed options.

First shutdown option

The phone turns on, after a reboot, Safe Mode automatically turns off.
If the automatic reset of the safe mode did not happen, then you need to remove the last application that was installed, for this you need to select the Settings item in the application menu.
When you select this application, the Uninstall option will be offered. This is the point to touch on.
After the above steps, reboot your device.

The second option to disable

If the first method did not give the desired result, then you can try the second method - reset to factory settings:

First you need to select the Settings item from the menu, in the expanded menu, touch the Backup and reset settings item.
In the proposed menu, select Reset to factory settings, then Reset smartphone / tablet.
Delete everything. After that, the device will be like new. But, keep in mind that all installed applications and personal data will be deleted. Only the factory settings set by the manufacturer will remain.

Thus, Safe Mode loads only the necessary number of programs and utilities, only the necessary components. It is for the security of user data that the manufacturers have developed the above mode, and only those applications installed by the manufacturer of the device will work. All other programs that were installed by the user himself may carry some kind of threat, and therefore will be disabled.

Even if the phone has serious problems, and in standard mode it no longer performs its basic functions, it can still work in safe mode. For example, the battery began to discharge too quickly or the call button does not work, before handing in such a device for repair, you can check its performance in this service mode.

PC users often face a problem when the operating system starts to hang mercilessly. If there are many utilities and drivers installed, it is quite difficult to find out what is causing the crashes. Fortunately, the developers have provided a solution to the problem: you will need to start Windows 7 Safe Mode.

Safe Mode Features

(safe mode) includes the loading of basic services and drivers, without which Windows will not start at all. All secondary services and programs will not be launched, which greatly increases the chance of a successful OS boot. Also, if you switch to safe mode, it becomes possible to more easily identify problems associated with the incorrect operation of Windows components and perform system diagnostics. Therefore, another name was assigned to it, it is also called the diagnostic mode.

Booting Windows 7 in safe mode or safe mode will allow you to determine at what level the problem occurred. If there are no failures after starting, then the reason must be sought in the downloaded files. Run programs one by one to find the "culprit".

Entering safe (diagnostic) mode in Windows 7 will help clean your computer from viruses. If the system is heavily infected, the antivirus may not be able to cope with the problem during a normal boot. In safe mode, you can also install an antivirus program if it has not been downloaded.

In especially critical situations, Windows does not boot in the usual way. Then you can rollback the system through safe mode. Select a restore point at which the system functioned without failure. The computer should return to normal operation.

Before starting work

Before entering Windows 7 Safe Mode, you need to check if USB is supported in the BIOS. If this function is disabled, you will not be able to use a USB keyboard and mouse, even if the devices work normally without any problems.

We go into the BIOS settings. To do this, you must restart your computer. When the BIOS logo appears, you need to press a certain button. Most often this is Delete or F1, but it all depends on the manufacturer. The desired key is usually indicated at the bottom of the screen. But be careful: the splash screen only appears for a few seconds.
The appearance of the BIOS may differ from the one shown below.
We find the tab "".
Make sure USB compatibility mode is enabled.
We press "". Windows will continue to start normally.

Now USB devices will work even before the OS starts.

Login during system startup

Restart your computer. When the BIOS logo appears on the screen, press and hold F8. Sometimes the key may not work. If everything is in order in the BIOS settings, try the combination Ctrl + F8 or Shift + F8.

You need to be in time before the Windows logo appears, otherwise you will have to start the procedure again. If you do everything right, a beep will sound and " Additional boot menu”, it will take some time to open.

Using the navigation keys, we can choose the appropriate option:

safe mode- graphical interface with basic programs;
with command line support- instead of the usual graphical interface, the command line mode will turn on. This download is suitable for IT professionals. Regular users are not recommended to download windows in this way.

We choose the first or second option, based on the need to access the Internet. But be careful: protection tools usually do not work in safe mode and you cannot always turn them on manually. So it's better to opt for the first download method.

A window for uploading files will appear. This will take a few seconds.

So now our computer is in safe mode. The screen resolution has become low, and the splash screen has changed to a black background. Help immediately opens, where you can learn about the inclusion and features of working in diagnostic mode.

However, there are some downsides here. The BIOS logo disappears very quickly, and users simply do not have time to press F8 in time. In addition, on a laptop it is not difficult to immediately enter the additional boot menu. But on a stationary computer, it often does not open or opens once every ten attempts. The exception is starting after an emergency shutdown.

Therefore, the question arises: what to do in this case, how to enter Windows 7 safe mode. Fortunately, it can be turned on in another way.

Launch from the system

This is an alternative option on how to quickly enable safe mode in Windows 7. The advantage of this method is that it works almost always and you don’t need to “catch” the cherished F8.

Press the combination Windows Start menu + R. A command prompt will open. Enter msconfig and click OK.
Or enter the command in the search menu bar Start.
Opens " system configuration».
In the tab " Are common» mark «».
Windows 7 prompts you to select options. We celebrate " Minimum» - the main programs will start without network drivers.
The system will prompt you to reboot - confirm.

The PC should now boot into Safe Mode.

We looked at how to start Safe Mode in Windows 7 without logging out. It is especially important here that the BIOS supports USB. In the first case, safe mode is selected before the system starts. Accordingly, if a USB keyboard is used, the F8 key simply will not work and the standard launch will begin. But when launched through the command line, the diagnostic mode opens from the Windows environment. If the keyboard and mouse have USB connectors, the user will encounter an unpleasant situation: safe mode is enabled, and the main input devices do not respond. You will have to exit through the emergency shutdown.

How to exit diagnostic mode

As a rule, to exit safe mode, it is enough to restart the system. This can be done in standard ways.

Through the menu Start
or through the key combination Alt + F4 .

Windows should return to native mode. But sometimes the reboot stubbornly does not want to start. Then the safe or diagnostic mode in Windows 7 can be turned off inside the system. In fact, we will exit it the same way we entered it.

After the reboot, the normal mode will turn on.

Of course, safe mode will not necessarily solve the problem. The computer may slow down due to heavy CPU usage. If you enable safe mode on Windows 7, the load will be significantly reduced, and the system will start to work well. But after a normal boot, crashes will appear again. Then you have to clean autoload. Nevertheless, it is an indispensable assistant in case of malfunctions or problems with starting the system.

How to start safe mode windows 7

There are two commonly used options for opening Safe Mode in Windows 7. The first involves logging in during system startup, the second is enabled during system operation. The first option will work even in cases of serious computer malfunctions, because there is no need to fully boot the OS, the user enters safe mode and performs the required repair and recovery manipulations. A prerequisite for the second option will be a running and active OS, because this method is not applicable in all situations, consider how to start windows 7 safe mode:

When the computer is turned on, you should restart it (if the PC is off, you need to turn it on).
Before the start of the operating system, the display shows information about the BIOS version, it is at this moment that you need to press the F8 key several times (pressing more than two or three times is recommended).
A screen will open with a window for selecting advanced OS boot options.
Using the arrow keys, the "Safe Mode" section is selected and the "Enter" button is pressed.

When instead of a special window with a choice of options for starting the system, the inscription “Windows 7” appears, which means the normal boot of the OS, the user should try again to enter security mode. It should be noted that the F1-F12 keys may have been disabled earlier, in which case, the F8 button should be pressed while holding the Fn key (often on laptops).

Consider the launch option during the active OS environment:

With the OS running, press the key combination "Win + R", enter the query "msconfig".

The above settings will bring the user to an interface that will prompt you to restart the PC. The owner of the computer can enter safe mode by clicking the "Restart" item. If you select "Exit without reboot", the entry into the required mode will take place after turning off / on the PC or after its first restart.

1. Features of Windows 10, how to enter safe mode?

An innovative modification of Windows 10 did not include the outdated method of opening Safe Mode by using the F8 key. There are three ways to activate it, the first pair of which is used during OS boot. The last option involves the failure of the system to start in the user's usual operating mode.

Starting safe mode using "msconfig" configuration:

Safe mode can also be started using the command line:

If the PC refuses to boot, you can activate safe mode as follows:

You must have a boot disk or USB flash drive with Windows 10.
Boot from this disk or flash drive, select the required interface language and other parameters.
In the window that appears, which prompts you to install the OS, you need to press the "System Restore" button located at the bottom of the window.
Go to the "Diagnostics" section and in the "Advanced options" subsection, launch the command line.
In the window that opens, enter "bcdedit / set (globalsettings) advancedoptions true".
Wait for the message that the operation was successful and deactivate the command line by clicking "Continue" after that.
After restarting the PC, a menu with available modes of operation will be displayed, select "Safe Mode". (It can be disabled with the command "bcdedit /deletevalue (globalsettings) advancedoptions").

2. Windows 8, how to enter safe mode for correct troubleshooting?

The specifics of the Windows 8 interface suggest not the most familiar method of launching safe mode against the background of other systems. Consider the main options for entering this mode.

The first option is to log in using the F8 button.

However, this method may not work on all modifications of computers, its sequence is as follows:

How to start Windows 8 Safe Mode by changing boot options?

The method is considered to be quite effective; for its implementation, the following series of actions are used:

Press the key combination "Win + R", enter the command "msconfig".
Go to the section called "Download". In the item "Boot Options", you should check the box opposite the inscription "Safe Mode".
Set the selector opposite the entry "Minimum", and then click "OK".
A window opens in which the user needs to confirm the restart of the OS.
After the reboot, safe mode will become active. After solving and troubleshooting, it is important to uncheck the previously checked box next to the "Safe Mode" item in the settings of the boot itself.

Another common way to activate Safe Mode in Windows 8 includes the following steps:

With bootable media.

Of course, including the possibility of a complete failure of the operating system, there is an option to enter safe mode using a boot disk or flash drive:

Insert a bootable USB flash drive into the PC and start from it.
Select date, time and other options.
In the installation window that appears, click on "System Restore".
Go to the "Diagnostics" item and select the section called "Advanced options".
In the "Command line" section, enter the task "bcdedit / set (globalsettings) advancedoptions true", then press "Enter".
Close the command prompt, and then press the "Continue" key.
After rebooting the OS, in the window that opens, press the F4 button.
Login in safe mode. To prevent the window with possible options for starting the system from appearing after each subsequent shutdown / on or restart of the PC, you must enter the following into the command line: “bcdedit / deletevalue (globalsettings) advancedoptions”.

3. How to enter safe mode in Windows XP?

Considering the outdated, but still relevant version of Windows XP for many users, let's consider the process of starting safe mode on it:

How to start Windows XP Safe Mode from the system? In some cases, this option may be an alternative to the above. Consider the sequence:

The Windows operating system can start in several different modes, one of these modes is called "Safe". When the operating system is started in this mode, the minimum number of standard programs and drivers is loaded. Only the most necessary to start the system start. In this mode, almost all available devices will not work. This mode was created to be able to fix incorrectly installed drivers or change the set of programs in the "autorun" section. After you correct all errors in the system settings, you will need to boot your computer in standard mode. To find out how to do this, read this article.

Instruction

If you could not solve the problem with disabling safe mode, then feel free to contact our specialists by ordering the service. We always have low prices and a quick solution to all problems!