How to enable geolocation on the iphone. Geolocation in iOS - all the most important about navigation on iPhone and iPad

One of the main functions modern smartphone is geolocation. With its help, you can use your smartphone as GPS navigator but, leave your coordinates on photos, send data about your location, and much more. In this article, you can learn how to enable geolocation on Android smartphone and also how to set it up correctly.

In most cases, geolocation is enabled and working on an Android smartphone. But, if you turned off this function before, and now want to turn it on again, then you need to go to the Android smartphone settings and find a section called "Location" there. It is in this section that all the settings related to geolocation are concentrated.

In the "Location" section, at the very top of the screen, you will find a switch that you can use to disable or enable geolocation on Android.

Below there will be a section "Mode". In which you can choose how geolocation works.

If you open the "Mode" section, you will see three possible geolocation modes. Let's take a closer look at each of these modes.

All Sources Mode(in older versions of Android, this mode was called "High accuracy"). The most accurate geolocation mode. If you enable this mode, then everything will be used to determine your location. available to smartphone information. This is satellite data, data from mobile operator, as well as data obtained through wireless networks Wi-Fi and.
Mode "By grid coordinates(in older versions - "Saving battery power"). This mode uses data only from the mobile operator and wireless networks(Wi-Fi and Bluetooth). While the GPS module does not work and does not consume battery power. Inclusions this regime geolocation work saves battery power and extends time autonomous work devices.
GPS satellites(in older versions - "By device sensors"). Geolocation mode in which data is used exclusively from the GPS module. In this case, information from the mobile operator and wireless networks is not taken into account.

If you go back to the "Location" settings section and scroll through the settings to the very end, you will find a couple more interesting functions there. These are "Location History" and "Geodata Transfer".

If you open the "Location History" section, you can enable or disable the recording of the history of your movements with your Android smartphone. This history is stored on Google servers and can be viewed on the website " Google maps"In the" Chronology "section. You can get more information about this function.

Nowadays, the geolocation function in the iPhone is widely used and is used, which has the most convenient properties for determining the location of the device on the Internet. What is gps geolocation on an iPhone? The iPhone was one of the first devices to have geolocation properties on the web, thanks to which installed applications, news and services are automatically configured and located in the smartphone's geographic space. This service can be active or enabled and inactive - disabled, depending on the settings in the iPhone. The geolocation service is quite energy-intensive and affects fast discharge battery iPhone, so there is no need to keep this function on all the time. To properly dispose and manage this service, you need to know how it works.

As soon as new applications appear on the smartphone, we immediately agree to all the conditions necessary for their operation. But, it is worth noting that quite often applications such as "Weather", "Camera", "Maps" ask us for an agreement to access the geolocation of the smartphone.

Why are they doing this? In some applications there is a map of the places where you have been, and for example in "Maps" this is used to determine the exact location and lay the routes you need. If the GPS data reception is good, then the circle on the map will be marked in blue, and if the data transmission is weak, then the circle radius will increase. Accordingly, the smaller the circle, the higher the accuracy. How to turn on GPS navigator on iPhone 5S and iPhone 6?

In order to check whether geolocation is enabled in your gadget, pay attention to the upper right corner of the screen, namely the status bar of your phone. Usually, a geolocation mark is indicated by a marker in the form of a black or white arrow.

How accurate the information provided by the "maps" application is directly related to the quality of the GPS. If geolocation GPS is not working on iPhone 5S, follow the instructions to set it up. Also, do not forget that each country has its own coverage and information, as well as routes may be indicated incorrectly or be a little outdated, so do not lose sight of environmental signs and signs.

How to enable information about your location

As soon as this or that application wants to ask you for geolocation on the iPhone, a notification about your consent will appear on the smartphone screen. A drop-down window will provide information about which program needs permission to use the data and how it will use it.

In some cases, the program can issue a request only when it is used, that is, when it is active or background... But also do not forget that when you restart your phone, a program that uses geolocation can start automatically and is in the background using geodata. To check which mode the geolocation is in, inspect your phone's status bar for the appropriate marker.

Any other programs, once requesting access, use it constantly, but when you download a new one, iOS reminds you which programs are in currently are already using it.

Geolocation services

How to enable geolocation on iPhone 4? In order to configure geolocation, check whether it is enabled or disabled, you need to go to the "Settings" menu and select the "Confidentiality" item, and in it the "Geolocation Services" window. General disabling of geolocation will allow you to disable this ability for all programs at the same time. But if you need to configure each separately or leave only one, then use the settings. Do not forget that if geolocation does not work, the general disabling of this service entails a limitation of the possibility and the impossibility of enabling applications on your smartphone.

How to turn off geolocation on an iPhone?

It often happens that only by acquiring new smartphone we agree with all windows that pop up on the screen. Without fully understanding all the functions of our gadget, we is in a hurry to turn on everything that it has. Therefore, over time, the question often arises about "How can I turn off geolocation on the iPhone?"

In order to disable geolocation, use the following settings:

To get started, go to the "Settings" menu and select the "Privacy" or "Confidentiality" window.
At the beginning of the section, open the "Geolocation Services" option and deactivate it by dragging the activation button to the left.
Finally, end with an affirmative "off" command.

Setting up a geolocation service in an iPhone is not hard, as you can always enable or disable it for individual applications using the activation keys. If you are using flexible customization service, then the button of this service will always be on.

Disable geolocation service or not?

The "System Services" function built into the iPhone allows you to determine the list of necessary services, the geolocation of which is necessary. If you open this section, then Geolocation iAd will be presented to your attention. They will reflect information about your movement, including location, speed and distance.

In addition, the user will find popular places in the system services section - those places that he has used more actively recently, where purchases were made. The data is collected by the service for statistical purposes.

Also, a tuned GPS navigator forms spaces filled with traffic jams on the roads of the area where the user is, facilitating his movement and informing about the situation on the road. The iPhone is coordinated with the GPS function, allowing the accumulation of data. If GPS is not working on the iPhone, then the location service will not be automatically activated

Indeed, the proactive stance of the service violates your privacy and allows services to monitor and account for your movement using your iPhone ID. If you do not want to collect statistical data about yourself, it is better to disable this service, preserving not only the confidentiality of your data. but also save on the amount of charging.

Geolocation - what is it? A similar name is special service which will seem extremely convenient modern people... But not everyone knows how to use it. Below we will talk about the features of this application. In reality, everything is much simpler than it seems. And with the right preparation, citizens will be able to cope with the task very quickly.

Service description

So what is geolocation? This is the name of a program / service for tracking the location of people on a map using mobile devices. The service works like a smart watch.

Thus, geolocation is a utility for spying on citizens. Not everyone knows how to use it. Often you have to secretly install the corresponding application on mobile phone... Indeed, in modern gadgets, geolocation is not so common among the "default" software.

How to use

So, geolocation (which we have already found out) is a program for showing the location of a person on a map in real time. We can say this is a kind of spy.

In real life, there are several ways to use geolocation. Namely:

work with third-party services;
using the services of mobile operators;
application of the "Geolocation" service on the iPhone;
surveillance by means of "Android".

Also someone can download and install for themselves third party application to determine the location of another person. We'll go over all of these techniques below.

Telecom operators

But that's not all about such a concept as geolocation. What else could it be? A similar name is a service search engine. It is actually not difficult to use it. In particular, if you do not use geolocation secretly. Otherwise, the process will cause a lot of trouble.

You can activate the service through telecom operators. They call the application under study "Navigator" or "Locator". With their help, you can send a request in the established form on the service website or from a mobile device, and then check where the person is.

The algorithm of actions will be approximately as follows:

Connect the operator option on the phone to be monitored.
Activation of the service on your smartphone.
Sending USSD or SMS request to the right moment... You can simply enter the phone number of the subscriber you want to find on the geolocation site.
Familiarization with the issued information.

If the request was sent from a phone, the user will receive a message with a map image on which this or that subscriber will be displayed. Everything is extremely simple and straightforward.

This geolocation has several disadvantages:

the need to install the option on the monitored phone;
limited number of connected and tracked numbers;
high prices for the service (with frequent use).

Therefore, many try to look for other methods. And this is a completely doable task. The main thing is to correctly approach its solution.

Connection from operators (numbers)

How to enable geolocation from cellular operators? It all depends on the service company. The following options are possible:

Beeline - send an empty message to 5166, and then install the Find My app for Android.
"Megafon" - dial USSD-request * 140№ #. To track the subscriber, use the "Navigator from Megafon" site or the command * 140 * subscriber_number #.
"MTS" - activation occurs after submitting a request like * 111 * 788 #. To add a subscriber to the geolocation list, you need to write an SMS in the format "Add name number" and send it to 6677. It is better to track the position through the website
"Tele2" - connection is made by dialing the combination * 119 * 01 #, adding a new contact - * 119 * 1 * number #, receiving information about the position of a person - * 119 * 2 * number #.

In fact, everything is not so difficult. But you have to understand that the service under study works with some errors. It displays the position of the phone with a difference of up to 1 kilometer (in the city center - up to 200 meters).

Third party software

Geolocation on the "android" is most often activated through third-party programs and applications. Most of them are paid.

The algorithm of actions in this case will be as follows:

Install spyware on the monitored phone. Something like "Phone Tracking", Hellospy, Talklog will do.
Configure information transfer parameters.
Send a request for pre-installed software from a computer or phone.
Get information about the position of the device.

Fast, simple and convenient. Discover spyware can only latest versions antivirus software. But finding a working geolocation is problematic.

iPhone and surveillance

But that is not all. The iPhone has geolocation built in. This is a service that you want to activate after you turn on your phone for the first time.

To cope with the task at hand, you must:

Open the main menu of the phone.
Go to "Settings" - "Privacy".
Select the Location Services option.
Set the toggle switch to the "On" position.
If necessary, set up a geolocation connection with other applications on the gadget.

After that, you can use geolocation through the cloud iCloud service... This is done like this:

Go to the website icloud.com.
Sign in with your AppleID.
Click on the "Geolocation" button.
Select your device at the top of the screen.
Click on the line "Find iPhone".

It is done. Now you can see the information given out. This is how people can track their Apple devices.

Disconnection

How do I turn off geolocation? The answer depends on how the option is connected. In the case of telecom operators, you will have to contact the appropriate organizations or use USSD requests. When it comes to spyware, you just need to remove it.

On "apple" devices, you need to do the following:

Go to the gadget settings.
Find "Privacy" - "Geolocation Services".
Set the switch to the "Off" position.

Now the answer to the question: "Geolocation - what is it?" won't be a hassle. After all, you are already familiar with this application.

The word "geolocation" has been on everyone's lips for a long time. But most people only have a general idea of what it is. Let's take a closer look at what this service is and how it can be useful.

Geolocation

What is geolocation? Geolocation is data that informs in real time the exact location of a computer, tablet or phone and, accordingly, its owner. Through this service, data such as the country in which the subscriber is located, city, street and house are established.

How it works

A prerequisite for the operation of the service is the connection of the device to the Internet. Each mobile device has special software installed to track its current geolocation.

Thanks to the Internet connection, the service locates the device using the current IP address of the subscriber. What is a geolocation service, we discussed above. Now you need to understand how it works.

What is it for

Now many programs developed for smartphones, tablets and personal computers, during registration, and some during use, they request the data of the current geolocation.

Some programs need this in order to place this data in the client's profile, other users could see his real location.

Applications designed for which they request geolocation in order to tell the subscriber exactly where he is at a given moment in time, help to plot the shortest route to the desired place.

Working with search queries

Geolocation is of great importance when processing search queries users. What is search engine geolocation and how does it help?

Depending on the location of the subscriber, search engines provide appropriate responses to his requests. This is very convenient and saves time searching for the information you need.

So, for example, when asking about how much and where to buy a new car, the system will first of all show the sites that advertise the sale of cars in nearby cities.

On mobile devices

What is phone geolocation? The included service helps you determine where the nearest cafes, restaurants, theaters, fitness centers, and more are located.

In addition, the included geolocation system in the phone will help you find the device in case of loss or theft. This service will be valid even if the SIM card was replaced when the phone was stolen. The main thing is that the Internet continues to work. It can be both the Internet, working from a SIM card, and Wi-Fi.

Service cost

This service is completely free. The only thing that spends money or megabytes on is the traffic used to download the maps. If your phone uses exclusively the Internet cellular operator, then the payment will be charged according to the tariff to which the subscriber is connected.

If in mobile device used exclusively by Wi-Fi or connected unlimited Internet from a mobile operator, then only Internet traffic will be consumed.

For business

What is geolocation for business? How can she help in its development? By tracking the demand for certain goods in specific regions, the firm can change in its branches. So, for example, you can install more low prices for goods that are not in demand.

In addition, for the convenience of customers, you can specify prices for each region in the currency used for payment.

How to connect

What is geolocation in a smartphone? How to connect it and how to use it? On phones of the fourth series, to enable the function of determining your current location, you need to go to "Settings". In this menu, you need to find an item called "Geolocation" and activate this function by moving the key to the side.

After enabling this feature, you will be prompted to choose which programs you allow to use your location data.

What is geolocation on an iPhone? How does it connect? To enable this option on phones with an apple of the fifth series, you also need to go to the "Settings" section, from there go to the tab called "Privacy", where in the very first line there will be a function called "Geolocation Services".

After activating this function, the system will offer to do all the same steps as in the fourth model. You will need to choose which programs can use your geolocation data and determine the time zone.

What is iAd geolocation? It has the same purpose as the iPhohe. Turns on this program universally.

The only difference that can be very useful is the ability to find a lost or stolen phone using a tablet on the same iOs platform.

To do this, you need to install special program called Find iPhone. You can download it for free through the AppStore application. Next, you need to register in this search program by entering your Apple ID data there. Then you need to check that the "Find iPhone" function is enabled on your phone. In order to do this, you need to go to the "Settings" section, go to the tab called iCloud, in which you can activate this function.

In order for the service to work, you need to enable it and allow the use of geolocation.

Latest version software the fifth series offers an additional service. In the same menu where the phone search function is connected, you can enable the function with which lost phone before being completely discharged, it will send data about its current location to the manufacturer.

To find a lost or stolen phone, you need to go to the "All devices" section from another device previously paired with it. Then go to the “My devices” tab, where the model of the lost one will be visible, after which the location of the requested device will be shown.

If the missing phone is turned off, you need to put a tick in the "Notify me about the find" section in the device from which the search is carried out. In this case, when the phone works again, you will know exactly where it is.

For the convenience of searching, this program has several useful functions. You can go to the settings of the "Find an iPhone" program and put a check mark next to the item "Play sound". If it is activated, when searching for the device, it will turn on with which you can easily find the lost device.

The second useful function programs - "Lost Mode". If you activate it, you can block the phone, and the number on which the person who found it can call you will be highlighted on its display.

The third function is called Erase iPhone. With its help, you can remotely erase all your stored on the lost device.

If the phone was lost, and all data was deleted from it, and then it was found or returned, you can easily restore all personal information using backup, which any device of this company makes every time it is connected to a personal computer.

Moreover, this parameter allows you to track your phone if it is stolen, so it is quite significant for the security of the gadget. We will figure out how to turn off geolocation on iPhone or, conversely, activate it if necessary.

Geolocation is a very useful feature of the phone

Although it is quite useful and, in principle, does not interfere with the user, it has its drawback. Like any other technology, geolocation eats up its "share" of the battery, which is already short-lived with active use of the smartphone.

What are the advantages of this technology?

In addition to the fact that it helps to mark the photo, this option of the smartphone helps in navigation. For example, if you are in another city and you need to find a certain place, it will be easier to do this with a map, where your route and its passage are displayed in real time.

The route and its passage on the iPhone map

On the other hand, often automatic detection addresses are not to the liking of users who want to keep their routes and lifestyle in general within their personal space. Not everyone likes it when under every photo that is laid out in social networks, the place where it was made is immediately displayed. Such a desire to secure your location and hide your personal life a little, of course, makes sense.

Locating iPhone

Disabling and enabling location detection

To use this feature of your smartphone, you need to do the following:

Go to the settings menu on your smartphone.
At the bottom of the list, find the item "Privacy".
Select "Location Services".
In the window that opens, using the slider, you can activate the determination of your location.

How do I disable this feature? To do this, you need to follow the same steps as described earlier, but move the slider towards disabling this option.

Function control

You can leave this system item enabled, but use it selectively, not for all applications. To do this, use the "Geolocation Services" menu - you already know how to find it.

Below the line for enabling or disabling is a list of applications where device location is used. Select one of them and you will see two options - "Never" and "When using the program".