Is it possible to cut a sim card. How to trim the sim card under nano sim

Experienced communication salon consultants will still remember the time when buyers have caused bewilderment that there are SIM non-standard sizes. Now the presence of several types of SIM cards is the usual thing. Manufacturers prefer all smaller cards, because it saves space inside the device case. Sims of standard size, cumbersome according to modern standards, that and look "awesome in oblivion."

In this article we will tell about all types of SIM and teach how to make a small card from a big card.

Nano-Sim.

Nano-Sim. - The newest and most miniature card for the phone. Its dimensions are only 12 × 5 millimeters. Visually a card is a chip with a minimum of plastic edging.

Novator spoke again apple company. Exactly Nano-Sim. The users had to insert 5th modifications to the iPhone. Later, the devices with Nano-SIM slots began to produce other well-known manufacturers - for example, Samsung and.

Understand the differences of three types of SIM cards from each other will help you with the following illustration:

How to change the SIM card size for the phone?

The most obvious way to resize SIM cards is make it a replacement in the operator salon. Such a procedure is completely free, it takes just a couple of minutes, the phone number subsequently does not change. However, this method still has a number of shortcomings:

The new SIM card will not be the numbers stored in the old memory. Of course, a similar problem easy to decide: In the article "" We tell immediately about several ways to export phone numbers. But, alas, many users consider their time too valuable to spend it on the development of third-party software and backup creation methods.
Replace the SIM card in the office has the right only its designer and only on the passport. If the card user gave, for example, parents, he himself will not be able to replace it. Sometimes it becomes a real problem.

If the consultant changes a sim card to a person who is not her designer, this is a fraud! For such an operation of the consultant at least deprived award, and as a maximum - with disgrace will be fired. Therefore, to demand "make an exception" meaningless; No one wants to be unemployed with an impartial formulation in the employment record.

There are several ways to change the sim card dimensions without resorting to replacement. For example, the user can purchase adapter(he is - adapter). The adapters look like this:

Order Adapters for SIM is better on Chinese sites - there they cost the essence of a trifle. For example, a set of adapters from Noosy Together with a needle for the iPhone will cost only 17 rubles. When buying in the cabin from the user may require up to 250 rubles - the difference is more than noticeable!

The set, as a rule, includes adapters of 3 species: Nano-Sim to Sim, Micro-SIM to SIM and Nano-SIM to Micro-Sim. Since SIM cards of reduced sizes still continue to be associated with Apple, manufacturers do not forget to put in the kits and needles to seize the slot under SIM. Use adapters simply: Little SIM card is inserted into the appropriate adapter, then the adapter itself with the card inside is placed in the slot of the mobile device.

Adapters help when you need to increase the SIM card size, but how to be the user if the card, on the contrary, needs to be reduced? The fact that such a need may occur, the owner of the gadget should be thought out at the stage of buying a SIM card - and insisted on the issuance of it so-called COMBI-SIM.. COMBI-SIM. - This is a standard size card from which a micro-sim card can be made in the fraction of a second.

Inside SIM card, standard in size, Micro-Sim. Already carved along the contour, so the user is easy enough to press up with a finger and break a piece of plastic.

Frame to hurry to throw away - She is still able to serve a good service. If there is a need to insert a card into the slot under MINI-SIM, The frame can be applied as an adapter.

Using COMBI-SIM. - One way to change the size of the SIM card up to the reduction. Cards COMBI Provided users mobile communications is free - Of course, in the presence of them in the operator's office.

If the user is already the owner of a standard SIM card and wants to turn it into Micro.without losing contacts, it does not have another exit, except to go on trimming the SIM card. Pruning, as a rule, is carried out using a special device called stapler for SIM. (it is - cutter for SIM, it is - SIM CATTER).

Make a standard Micro-Sim. If there is such a stapler - a second procedure. However, we will expect in the sales office or in the workshop this procedure will be produced is free, not worth it. Employees of the cabin will require a pruning of 149 rubles and even choose a check for the provision of a paid service. In repair shops, they will also ask for money - either at all will send a user to deal with the operator.

The trimming of the SIM card is associated with some risk - if a person producing the procedure hurries or will show inattention, it will damage the chip, and, as a result, the SIM card will not function. Hence the high cost of the services of trimming - no one wants to risk "for just so."

How to trim a sim card with your own hands?

Not in all salons cellular communication There are staplers for SIM - some consultants continue to trim cards with their own hands and ordinary scissors. Perhaps the reader will surprise the fact that no one trains consultants. They independently exhaust such a skill, and many successfully trim the SIM card is obtained the first time.

Nothing amazing - in reality the procedure is extremely primitive! Typically, the main complexity is to find a template. Consultants have a whole table, as a rule, are collapsed by sims of various sizes working and served their period - they are used as samples. An ordinary user about such abundance is only to dream - however, if he still managed to borrow a sim card of the desired size on the role of a template, he can safely try to trust with his own hands. If not, it should be resorted to the help of the printer and the template print (here is a suitable link).

To trim the SIM card, markers, rules and pencils are not needed - if you act according to such instructions:

Take a big SIM in your hand chip up.
On top, attach a sample card so that it completely covered the chip, press it tightly with a thumb and do not let go. If desired, the template to a large SIM can be attached with the help of bilateral scotch, however, experts do not recommend doing this - you can damage the chip.
Gently cut plastic on the sides. Try not to be enough unnecessary, otherwise Simka in the slot will "hang out", and the signal is rubbed.
Card the map on the template across. Here you can act less scrupulously; The main thing is not to touch the chip.
Remove the corner and round the edges - otherwise SIM card does not fit into the slot.

Next, set aside the template aside and try to install the cropped card into the phone to check its performance. If the SIM card does not fit into the slot, carefully cut the plastic and try again. If the map of the slot is just in size and the phone is read, triumph - you just cut the SIM card with your own hands!

note that not any map You can "cut down" to the desired size. The easiest way to remake Mini-sim in Micro-SIM -such a trimming should not cause a user of difficulties. Crop under Nano-Sim. always harder; Plastic around the chip on the card Nano. There is almost no, so the risk to hook the scissors chip sharpets are quite high.

In everyday life, there are still sim cards of an old sample - with large chips:

Cut such SIM - a real nightmare! With some proportion of luck from a similar card can be made Micro-Sim.but turn it into Nano. definitely will not succeed.

Conclusion

At the fact that the manufacturers of smartphones began to produce gadgets that support SIM cards of different types, salon sellers have decently enriched. Of course, not all paid services pass through the cashier - in many cases money for trimming is sent to consultants in pockets. Pruning sims for sellers - "bread case", and therefore free Consultants' assistance has nothing to count.

Therefore, the user who does not want to "feed" employees of salons is better to master the trimming skills. This procedure is sufficiently simple and "surgical accuracy" does not require.

Modern smartphones and tablets suggest using reduced SIM cards, the so-called Micro-SIM. This is due to the fact that manufacturers are trying to reduce the thickness of mobile devices. It is possible to reduce the standard sim card in the cabin, paying for money. But you can trim the SIM card under the microsite at home using a special template.

In the latest models of smartphones, reduced microsim cards are often used. Reduce standard chip can be reduced in different ways.

Order a card of the desired size in the cabin. This is an excellent solution to the problem, but you still need to get to the salon.
When buying a new smartphone immediately ask the seller to crop chip, but you need to remember that this paid service and its value ranges from 200 rubles or more.
You can myself to buy a tool for pruning sims, but it can cost up to 1000 rubles. Trimming just one card is not worth it.

You can trim the card with your own hands using the primary tools and materials. It is necessary to do it carefully not to damage the scheme itself.

The template is printed on A4 format, on 1: 1 scale. If the template is planned to be used more than once, then it is made of thick paper, cardboard, or even a special film.

Required tools

Before performing work, you should cook required tools and materials.

Sharp scissors or stationery knife;
A ruler, better metallic;
A simple pencil or pen, a pencil is good to sharpen;
Paper sheet for making template;
Emery paper or nail file.

It is important to prepare sharp scissors, such as manicure. Scissing with thin blades less chew plastic.

Instead of a trim template, you can use the sim card of the desired size. It is simply laid on a standard chip and drive. Then extra plastic is cut.

Crimping process

Crop your card is needed with great care, trying not to damage the chip. Perform work in such a sequence:

Print the template on the printer, take the usual sim card, put it on the sheet so that the lines coincide with the future microsim. Carefully drive the card with a pencil.
The sheet is turned over and fixed on it Skotch tape, combining with designated contours.
Turn the sheet back and carefully along the lines are carried out by a stationery knife according to a ruler. It is important not to rush and work with a knife neatly. Instead of a ruler and a knife, you can use sharp scissors, the effect is the same.
After that, remove the card from the sheet and pour plastic with manicure scissors around the edges.
The final stage is a grinding card. To do this, use sandpaper or nail file.

After that, the card is ready for use. If it is poorly placed in the slot, it is a bit perval with the help of sandpaper.

It is worth remembering that if the chip is damaged, it will not work and will have to be changed.

Cut the SIM using a special cutter

Crop the SIM card with a special cutter is completely simple. This device looks like a stapler, just a bit more size. Made of such a cutter made of metal. Depending on the manufacturer, the design may differ slightly, but the principle of operation of devices is the same. The standard chip is laid in the lower part of the device and pressed the upper part.

When trimming the cutter almost excludes damage to the chip. But you do not need to forget that too cheap devices do not cut cards badly. At best, they have to refine the sandpaper, and at worst change.

To finally cut the standard SIM card to the microsim standard, it is not necessary to pay money. You can do it yourself with the help of a stationery or scissors.

The creators of modern mobile devices seek to make them all more compact and thinner, introduce new opportunities due to the development of technologies. All this leads to the change of generally accepted standards. Phone owners face these manifestations of progress constantly - almost every new generation of phones appears new type charger, and in recent years, instead of standard SIM cards that are available in any mobile operators' sales office, micro and even began to appear nano Sim.ki.

Little SIM card allows you to save a useful space in mobile phone, and owners of phones last models, for example, Samsung and Apple are faced with the fact that the standard Simka device does not fit. In this case, the entire functionality of the cards will continue, only its size changes: 12x15 mm in micro anti-15x25 mm in standard. In this article we will tell you what to do if the SIM card is not placed in a modern phone.

How to trim the sim card under micro sim?

The owners of new phones are often faced with a sim card trimming problem after the acquisition of new items: not all sellers warn that the standard card is not suitable for certain models that require a micro sim card. In this case, the pruning of the SIM card can be carried out independently.

In fact, it is not as difficult as it may seem. In order to make micro sims from ordinary SIM cards and independently cut down more superfluous, you will need:

pencil
rule
sharp scissors
sandpaper

To simplify the process, we recommend using the micro SIM card template - download and print it. After that, make your SIM card using a tape for a printed sheet of paper over the selected template. Then, using a ruler and pencil or knobs, mark on the SIM card sizes of the future micro-sim.

Carefully cut it out with sharp scissors or a stationery knife and hang the edges of the shallow sandpaper. Additionally, it will be necessary to take a bit of the thickness of the card from the logo of emery paper. Everything, Micro SIM-card Ready, and it can be used in direct intended.

If, after trimming, you want to use your micro sim card in the phone with a standard slot, it does not have to change it, it is enough to purchase an adapter for micro SIM cards in the electronics store.

Or you can measure the desired dimensions and manually cut off the extra plastic. When you mark the SIM card with a chip, so that the bezed edge is at the top of the right. To the right and to the left of the edge of Sims, measure and cut 1.5 mm, below - 2 mm and from above - 8 mm.

Act carefully not to damage the golden chip of your card. Now, measure where to cut the bevel over the angle: from the right upper angle of 2 mm down and the same to the left, connect the obtained points using a ruler and a pencil, and then do hard. Lightly round the edges of the SIM card with scissors.

Sometimes it's easier to change than cut

In the event that it seems too complicated independently to cut the micro sims, then you can seek help to a consultant in the office of your mobile operator - Beeline, megaphone, tele2 or MTS. Ask you to change the symart or trim it - you will gladly help you.

When replacing you, you will be given or a universal card on which micro and nano sizes are already scheduled. All you need to do is carefully squeeze the sim card of the desired format from the plastic frame. The only inconvenience when replacing the SIM card - the numbers from it will need to be saved to the phone.

Also, there are special devices in communication salons, allowing you to quickly and unmistakably cut any SIM card under the required slot size on mobile devicelike micro and nano. This service is free, and the sim card is cut to the desired parameters in a couple of minutes.

Today there are three main types of SIM cards that differ in size. They are used in different types of phones, but trimming is usually required for old cards.

Why require cropping

Frequently available SIM card is not suitable for new smartphones connectors. This is caused by the desire of manufacturers of modern phones to save the inner space. Therefore, now there are models that use micro.SIM. and nano.SIM.. Any mobile operator can no problem exchange old sims on new ones, but if it is not possible to replace, one of the most simple ways Solve this problem will be trimming a SIM card.

Ways trimming

There are several simple ways to cut a sim card independently that do not require special skills:

Trimming with help finished SIM card Suitable size. The easiest option to find the sim card of the desired size from your friends. Since micro and nano SIM cards are now common, finding the appropriate option is not so difficult. Chips in maps are combined and the boundaries of less are marked.
Using paper template. On the Internet it is easy to find ready templates Sims. They can be printed on the printer.
Application special punching. Used in case it is necessary to trim sims constantly. A special cutter can neatly trim the part of the desired form with the help of sharp blades. Externally, the cutter resembles a standard hole punch.
Using heated form. The Chinese developers were invented a special device, allowing the special form on the heating of a special form on the spoke and applying it to the SIM card to receive a detail of the desired size.

Independent cropping

Consider how at home using these methods to make SIM cards of the correct size.

Use the finished card as a template

To trim the standard sim card under micro and nano, you need to combine chips with control points. Then, micro or nano-sim with the help of scissors or heated needle will be accurately. Some use a marker or pencil, but they can be labeled in the process of dying. So it is better to avoid this option.

Next, with the help of scissors, it is gently divided by a detail of the required size. It is not worth a hurry here, to this case you need to approach with special accuracy, because chip damage It will not allow to use the SIM card in the future.

Print template

On the Internet it is easy to find a picture with the desired template. There are options indicating the size. When printing must be necessary specify 100 percent scale for print. It is better to use solid types of paper or cardboard so that the end template can save the form and was not deformed during the stroke. It is also good to use sharp objects. After that, the circled chip is cut with neat with scissors.

Use hole punch (special cutter)

The use of this instrument significantly increases the speed of the pruning SIM card. It does not need to pick up here. Some models successfully combine several options for all modern models of smartphones. The cutter also allows leave a whole framewhich, if desired, can be placed back using glue.

The counting process itself is similar to the work of standard holes. Trimming happens with compressing two piecesOn one of them are sharp blades. The process itself does not exceed 5 seconds. Despite the low cost to profitably acquire it if it is used regularly.

Use of heated form

On the expanses of online stores for sale a special device representing frame on the spoke. It cuts the SIM card of the desired size using heating. Its use allows you to get a neat item. The cost of such a fixture is much less than the cutter.

Whatever the method is not selected, you must carefully treat the cutting process, since when damaged the chip, the SIM card cannot be used. Will have to contact K. mobile operator For replacement.

Currently, many modern gadgets can use only the reduced version of the standard SIM card - micro Sim.. This is due to the attempts of manufacturers of equipment to save the inner space in the device, to compact the rest of the elements and make our phones and tablets less, thinner, easier and ultimately cheaper in production than their predecessors.

Buying new phone Or the tablet (for example, Samsung, HTC, iPhone or iPad) can be found that the standard SIM card is not suitable for it and to continue to use its usual SIM card after purchasing a new device, it can be trimmed. The main chip remains in place, only the dimensions of the plastic base are reduced. Make Micro SIM from conventional SIM card At home is easy, we will need only sharp manicure scissors, an endless pencil, a ruler, sandpaper (or nail file) and a bit of patience.

The usual SIM card is a plastic rectangle with a chip having parameters 25x15 mm. The micro-card micro-card sizes should be 15x12 mm. Crop the usual sim card until the desired size can be as follows:

If the SIM card after changing the size will be more than you need, it can always be corrected if the size is significantly less - the SIM card will not be able to use and have to be changed to the new one.

If you are afraid to spoil the sim card or just laziness, you can replace the standard SIM card on the card of the desired size in any Beeline office. Upon presentation of a passport, a new SIM card will be issued to the subscriber, or cut to a Micro SIM format an old SIM card, an apparatus, externally resembling a stapler. It will take it a minimum of time.

Reverse situation is possible - using micro SIM cards in devices with standard slots. This requires a special adapter for micro SIM cards that can be bought at any communication salon. Thus, your micro SIM card will be universal for most devices.